Related to Http at source side

Hi,
Do we have to create any message type for Source ?  Any sender communication channel required when our source is Idoc sending through Http, Is it similar to Proxy?

Hi Divya,
Are you trying to send an IDoc data from SR/3 to XI? and for this you want to use HTTP protocol?
if yes, then the source structure can be IDoc and there is no need for a sender agreement.
Make sure you have a HTTP connection from your R3 to XI.
One question why don't you use the normal IDoc adapter in this case?
Regards
Suraj

Similar Messages

  • I am on Source side and DDL replication is enabled.

    I am on Source side and DDL replication is enabled.
    I would be providing initial dump of TABLE and VIEW objects to target using Export DP to Target.
    And start Golden Gate Extract, Pump on Source.
    Source PRM file has Table list.
    EXTRACT ex1test
    DDL INCLUDE MAPPED
    EXTTRAIL ./trails/l1
    TABLE ABCD.T100;
    TABLE ABCD.T200;
    TABLE ABCD.T300;
    Objective is ---- If I change VIEW definition at Source, it should be reflected to Target
    Question is --- In my PRM file, how I can include VIEWs???
    If the source has 10 views , only 5 are replicated to target ..
    DDL changes for only the ones in the target should be considered other must be excluded
    Thanks and Regards,
    Kurian

    Hi Kurian,
    Oracle GoldenGate supports VIEW replication in both Classic and Integrated Modes. But we do have some limitations on it.,
    1. Capture from a view is supported when Extract is in initial-load mode. The data is captured from the Source View and not the Redologs.
    2. Changes made to the data of the view will not be captured.
    3. View replication is only supported for inherently updateable views in which case the source table and target view structures must be identical.
    You can exclude DDL Objects using the ddl_filter.sql
    To know more about ddl_filter.sql, follow the below link.,
    http://docs.oracle.com/goldengate/1212/gg-winux/GIORA/ddl.htm#GIORA316
    Under this,
    13.8.1 Filtering with PL/SQL Code
    Regards,
    Veera

  • Multiple XML HTTP Data sources sequentially

    Hi,
    We are creating a report using multiple XML HTTP Data sources sequentially.
    The Report uses multiple XML HTTP Data sources sequentially; the report creation fails or delayed. We would like to join the datasources after accessing from the HTTP Server.
    At the same time the same XML files when locally accessing as data sources, the report is getting created.
    Is there any alternate solution for XML HTTP Data Source Access. Or in which way I can proceed with this.
    Thanks,
    Unni

    I am not able to use datasets here.
    The context is as below.
    I am running an HTTP server (XML-RPC program),which will generate an XML output as defined with a local XML Schema.
    Here I have multiple HTTP requests ,each will generate multiple XML outputs.
    I am using XML and WebServices Connection where I will provide like below,
    (Please note file1,file2 are normal text files with data corresponds to xsds.)
    HTTP(s) XML URL : http://localhost:8002/ReadTable?name=file1
    Local Schema File : E:\Test\file1.xsd
    HTTP(s) XML URL : http://localhost:8002/ReadTable?name=file2
    Local Schema File : E:\Test\file2.xsd
    Like this I am able to create multiple XML outputs through HTTP requests.(only file1),which means while creating reports the sequential requests are not handling properly.
    My report will join say two of theese files. But at the time of report creation it will ask of only runtime parameter of first request in the join.
    Here The report will generate only with data from first text(data) file.(file1)
    Hope you got a clarity about the proble.

  • Need documents related to inventory data sources

    Hi all,
    just need a favor from u guysu2026.i need documents related to inventory data sources (complete step by step)u2026we need to extract inventory data sources from R/3 and need to replicate them in a brand new BW systemu2026Iu2019ll appreciate anything that u people have gotu2026and share with me.
    Regards,
    KS

    Hi
    check this thread
    it might be helpful
    doubt related to inventory data loading
    Inventory doubt
    regards
    gaurav

  • Message mapping source side

    Hi Experts,
    Is it possible to copy the message in source side in message mapping using src tab?
    Regards
    Sara

    You cant get the required target xml structure with values untill u complete the mapping
    Why because if you have any transformation in mapping means you have to generate the target values according to that
    So better to complete the mapping and take the xml file
    Regards
    Seshagiri
    Edited by: N V Seshagiri on Dec 2, 2008 7:05 AM

  • After R12 clone, Source SID appears in users' personal homepage

    Hi, After cloning an R12.1.3 instance, users logging into the Target instance see the name of the Source instance in the banner of their personal homepage. How can this be rectified? Apps dba's have run all standard cloning processes (in Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1]). Verified Source SID does not appear in Target context files, additional autoconfig run in Target - still getting Source instance name.
    Thanks for any thoughts

    user1083814 wrote:
    Hi Helios, I should have mentioned, that the profile option "Site Name" was already set to the Target environment name. That sets the name correctly in the Forms headers. But it does not affect the name in the banner of the users' personal home page (a html page, not forms). So the problem is still there.What page you are referring to? Could you upload a screenshot?
    Thanks,
    Hussein

  • REG: 4 different folders from the source side and we need to have the BPM t

    Hi All,
    We are using a BPM for file-idoc scenario. Previously we use to have one source folder which sends file and the bpm worked fine. Now we have a requirement where the files come from 4 different folders from the source side and we need to have the BPM to run independently for each folder.
    What are the changes to be made in IR and id for this..
    Thanks & Regards,
    Kiran.

    File adapter has a option advance selection of source file setting which can be used for picking files from different folder.

  • Problem Uploading Photos in HR. Is it related to HTTP connection in SM59?

    Hi friends,
                This issue is related with Uploading of Photos in HR Module. There my ABAPer got some Authorization Problem, he says. here i have posted the Query what he has explained to me. please go thro' it and let me give sugessitions reg that from Basis side.
    For your Information, We have installed ABAP Stack only. Is it related with JAVA stack also? Plz advice me on this
    Here is the ABAPer Query:         
    "Im working of HR photo upload in OAAD where im getting this warning error after i continue the file in the location path.
    All the fomalities i've followed as per docs
    and activated my serive in SICF.
    Note:Testing on IDES, so not authorisation given in Serivce data under OAAD.
    In help doc also it said that "if u get this warning error then try to redo the same and u'll get a seccessful message."BUt i've tried more but still not happened successfully"
    Pls advise how to resolve it
    thanks & regards
    Siva

    Yes.. most likely an authorization issue... you can trace the user via ST01 or just check SU53.
    Read,
    http://help.sap.com/saphelp_nw04/helpdata/en/4f/993851446d11d189700000e8322d00/frameset.htm
    Regards
    Juan

  • Related to the Data Source 0EC_PCA_3

    Hi BI Gurus,
    Could any one let me know to find the data in a data source if we r not authorised to use the T Code RSA3 (Extractor Checker).
    The problem is: We have a Query built on Multi Provider into which the Profit center data is not coming for some recent months.
    What is the Root cause analysis we need to find out why the data is not coming in the Report.
    Data flow is like...Source Sys ---> ODS -
    > Several Cubes (around 7) -
    > Multiprovider built on these Cubes ---> A Query is built on MP....
    In the BW side, there is no problem...So we need to check in R/3...Please help in finding a Solution for this problem.

    Hi,
    Source Sys ---> ODS -
    > Several Cubes (around 7) -
    > Multiprovider built on these Cubes ---> A Query is built on MP
    now let's start from BW
    1.can you check in cubes with the selection whether the data is present for for 7 th month (which is actaully missing)
    if no data was available
    2.chk in ODS with selection
    still you didn't find any data
    the only soultion is to check in source sytem
    now you don't have rsa3 authorization
    is there any way you can sit with basis to get the authorization
    if not since it is delta,the only soultion strikes to me is
    run full repair to ODs by giving selection in fiscperiod field(7th month)
    if not the last option is
    go for re-initialization
    Cheers,
    Swapna.G

  • Plug-Ins and Extractors - Related to Upgrade of Source system

    Hi,
    We are upgrading from R3 to ECC.
    Can I say that, if the Plug-in in current R3 system and the new system(post upgrade)(ECC) are same then, the extractors will also remain same ? hence, nothing will be affected in BW ?
    For example, if the current system(R3) has the Plug-in as PI 2004.1 and the upgraded ECC also has the same Plug-in PI 2004.1 , Can I say that the extractors will also be the same ?
    Regards,
    Rekha .

    You have to take care of all your deltas are picked into the bw before upgradation.
    Some times you may required to replicate the data sources after upgradation.
    You may lose the connection between your R3 and you BW.
    Please do a souce system check after the upgradation.
    You have to take care of all deltas :
    As a standard practice we drain the delta queues by running the IP/ chain multiple times.
    As a prerequiste we cancel/reschedule the V3 jobs to a future date during this activity.
    The V3 extraction delta queues must be emptied prior to the upgrade to avoid any possible data loss.
    V3 collector jobs should be suspended for the duration of the upgrade.
    They can be rescheduled after re-activation of the source systems upon completion of the upgrade.
    See SAP Notes 506694 and 658992 for more details.
    Load and Empty all Data mart Delta Queues in SAP BW. (e.g. for all export DataSources)
    The SAP BW Service SAPI, which is used for internal and ‘BW to BW’ data mart extraction, is
    upgraded during the SAP BW upgrade. Therefore, the delta queues must be emptied prior to the
    upgrade to avoid any possibility of data loss.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
    /message/3221895#3221895 [original link is broken]
    OSS notes 328181 and 762951 as a prerequisites.
    http://wiki.ittoolbox.com/index.php/Upgrade_BW_to_Netweaver_2004s_from_v3.0B

  • Dynamic structure on source side

    Hi SDners,
    i have a req that  to pull the data frm 10 sap tables depend and dump it to file ,depending on input data will come frm table dynamically frm ECC side.is it possible that we can make our source structure dynamically depending on input data coming frm ECC side...........
    Regards

    Hi Gangadhar ,
    One approach --->
    At XI end use a simple structure with only one field.
    At ECC end you can use proxy and in Proxy code you can put the logic to fetch the data . and finally pass it to the single field of Interface . Later on handle the data at XI end as per your requirement .
    It was just a suggestion, though dynamic structure seems to be a challenging though not sure.
    Regards ,

  • System copy: RZ21 MTE has source SID and not the target SID

    An system copy of PRD to QAS environment has been performed.
    Since then receive the following message in the CCMS Monitor sets (trx RZ20):
    Unable to determine the name of MTE class from <SID>\Background\...\SAP_SRT_COLLECTOR_FOR_MONITORIN or the message "Failed to determine MTE information for system QAS"
    Checked and in the transaction RZ21 the MTE class is pointing to the PRD system and not to the QAS system:
    RZ21 -> MTE-specific properties
    Monitoring: Properties Assigned to MTEs
    RZ21 -> Methods assigned to specific MTEs
    Monitoring: Properties and Methods
    Unable to determine the name of MTE class from PRD\Background\...\SAP_SRT_COLLECTOR_FOR_MONITORIN
    I would expect here the value "QAS\Background\...\SAP_SRT_COLLECTOR_FOR_MONITORIN".
    How can I adjust the MTE to check the QAS instead of the source system PRD ?

    Received following answer from SAP:
    we can find out the follow errors from the dev_disp developer trace file you attached.
    ERROR => e=13 semop(1048668,(0,-1,4096),1)
    (13: Permission denied) [semux.c 1196]
    ERROR => CCMS: AlCreateAttachShm_AS : lock semaphore return 1
    [alxxappl.c 665]
    ERROR => CCMS: sAlInit: could not create/attach shared memory key 13(rtc = 1) [alxx.c 1187]
    ERROR => AlDpAdmInit: sAlInit rtc = 1 [alxx.c 514]
    ERROR => DpLoopInit: AlDpAdmInit [dpxxdisp.c 2033]
    The shared memory area 13 is the one that is responsible for the alert area.
    An error within that area could cause the problem that you are facing when opening monitoring trees.
    If we look at your OS, we can see that the semaphore for this area is currently being held by the root user:
    [1]ipcs | grep 1048668
    s 1048668 0x00004e46 ra-r root system
    You need to delete this area with root user using ipcrm and restart the instace or to reboot the OS and start the instance once again.
    Performed these actions and the issue was solved.

  • Links relative to HTTP address ?

    I'm using DW8 and I'm trying to find a way that DW8 can
    create links relative to an http address.
    For example, if I move an image in the local site to the html
    page the html code will show something like the following:
    <img src="/images/image1.gif"
    What I need is that when I move the image it creates a line
    like the following:
    <img src="
    http://mywebsite.com/images/image1.gif"
    I checked everywhere and I cannot find how to do this on DW8.
    Inside the site settings I have the http address specify but that
    dopesnt work. That only works for site relative links.
    Any inputs?

    No way, Jose. Sorry....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "rcrane" <[email protected]> wrote in
    message
    news:f9am5s$dhd$[email protected]..
    > I'm using DW8 and I'm trying to find a way that DW8 can
    create links
    > relative
    > to an http address.
    >
    > For example, if I move an image in the local site to the
    html page the
    > html
    > code will show something like the following:
    >
    > <img src="/images/image1.gif"
    >
    > What I need is that when I move the image it creates a
    line like the
    > following:
    >
    > <img src="
    http://mywebsite.com/images/image1.gif"
    >
    > I checked everywhere and I cannot find how to do this on
    DW8. Inside the
    > site
    > settings I have the http address specify but that
    dopesnt work. That only
    > works
    > for site relative links.
    >
    > Any inputs?
    >
    >
    >
    >

  • ODI 12c - Set staging table on source side

    Hello All,
    In ODI 12c, is there any default options I can choose if I want Staging Table (C$ Table -EXPRESSION_AP) be created on Source DB instead of Target DB?
    Or is it possible to skip creating the staging table with default IKM/LKM?
    Thanks in advance!

    In 12c the concept of specifying where to execute expressions has changed somewhat. You now have hints which ODI may override internally if there is a better execution plan.
    The following article provides a more detailed overview on execution hints, which by default are set to "No hint"
    https://blogs.oracle.com/dataintegration/entry/odi_12c_expressions

  • Reg:http adapter-sender side

    which http client tool is used to send the request if we are using http adapter on sender side?

    Hi Chandra,
    HTTP: Hyper Text Transfer Protocol is a stateless prtocol to send a request and get a response back on that. For your query is there any specific client used?
    Ans: No, you can use any client means the ip address of the system from which you are making request called client and to which you are making request called server. http is nothing but some set of rules to exchange data between two systems.
    One more thing to mention is "some jave code is written for http and that is register on W3C" so that different server can connect to each other using it.
    See the link below:
    http://www.w3.org/Protocols/
    Please always Rewards if helpful.
    BR,
    Alok
    Edited by: Alok Sharma on Mar 18, 2008 12:49 PM

Maybe you are looking for