Related to issues

1.Is there any Tcode for monitoring process chains if not what how to monitor ? Thanks in advance
2.In my company I am using process chain for loading transaction data to sales order cube, after triggering the start process execution of infopackage is unsuccessful. So I scheduled it manually from there I want to automate the further process (ie, generation of indexes ,rollup of aggregates ..) how to automate it ? Thanks in advance
3.Where to monitor all system generated tickets and how to pick it. ,and how to maintain queue for system generated tickets? Thanks in advance
4.When I scheduled the infopackage data was requested but in the monitor screen status was red and error message is shown as Idocs missing why it occurred and how to resolve it (when extracting data from R/3 to BW)? Thanks in advance
5.How to reconcile data in R/3 and BW after data load? Thanks in advance
6.What is formula collision? How to rectify it?Thanks in advance
7.What are dead locks? How to resolve them?Thanks in advance
Any who helps me in finding out these answers will be rewarded with points.

Chenna
Welcome to SDN
1 RSPC and RSPCM
2 http://help.sap.com/saphelp_bw33/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
process chains
4 Some times Idocs hungs so please post manually and system will take care from next loads
5 Open BW and R/3 scessions. go to the respective tables in R/3 side and check for Data. In BW as you know you could see in the cube or ODS.
6 http://help.sap.com/saphelp_nw04/helpdata/en/71/0aec3b6e011341e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d2/02223c5f00612be10000000a11402f/frameset.htm
7 http://help.sap.com/saphelp_nw04/helpdata/en/65/364d8381f765418fb0e73d4417884d/frameset.htm
Hope this helps
Thnaks
Sat

Similar Messages

Batik-related compiler issue

<div class=Section1> I received this error calling the flex2.tools.Compiler’s main[] method. The MXML input compiles successfully in the Flex 2 builder. I wanted to check to see if anyone had experienced this before digging deeper into source code.<o:p></o:p> <o:p> </o:p> --Scott<o:p></o:p> <o:p> </o:p> <o:p> </o:p> <o:p> </o:p> ------------------------------------------------------------------------- ----------------------<o:p></o:p> <o:p> </o:p> font-family:"Courier New";color:red'>Error: org.apache.batik.css.parser.Parser.getLineNumber()I<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New"'><o:p> </o:p> font-family:"Courier New";color:red'>java.lang.NoSuchMethodError: org.apache.batik.css.parser.Parser.getLineNumber()I<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flash.css.StyleParser.getLineNumber(font-family:"Courier New";color:navy'>StyleParser.java:208<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flash.css.StyleDocumentHandler.startFontFace(10.0pt;font-family:"Courier New";color:navy'>StyleDocumentHandler.java:100<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at org.apache.batik.css.parser.Parser.parseFontFaceRule(<span style='font-size:10.0pt;font-family:"Courier New";color:navy'>Parser.java:484<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at org.apache.batik.css.parser.Parser.parseStyleSheet(<span style='font-size:10.0pt;font-family:"Courier New";color:navy'>Parser.java:224<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flash.css.StyleParser.init(<span style='font-size:10.0pt;font-family:"Courier New";color:navy'>StyleParser.java:172<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flash.css.StyleParser.<init>(font-family:"Courier New";color:navy'>StyleParser.java:106<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flash.css.StyleSheet.parse("Courier New";color:navy'>StyleSheet.java:5410.0pt;font-family:"Courier New";color:red'>)10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.compiler.mxml.analyzer.SyntaxAnalyzer.parseStyle(<span style='font-size:10.0pt;font-family:"Courier New";color:navy'>SyntaxAnalyzer.java:551<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.compiler.mxml.analyzer.SyntaxAnalyzer.analyze(<span style='font-size:10.0pt;font-family:"Courier New";color:navy'>SyntaxAnalyzer.java:122<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.compiler.mxml.dom.StyleNode.analyze(10.0pt;font-family:"Courier New";color:navy'>StyleNode.java:50<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.compiler.mxml.dom.AnalyzerAdapter.traverse(<span style='font-size:10.0pt;font-family:"Courier New";color:navy'>AnalyzerAdapter.java:172<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.compiler.mxml.dom.AnalyzerAdapter.analyze(<span style='font-size:10.0pt;font-family:"Courier New";color:navy'>AnalyzerAdapter.java:164<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.compiler.mxml.analyzer.SyntaxAnalyzer.analyze(<span style='font-size:10.0pt;font-family:"Courier New";color:navy'>SyntaxAnalyzer.java:55<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.compiler.mxml.dom.Node.analyze(font-family:"Courier New";color:navy'>Node.java:47<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.compiler.mxml.InterfaceCompiler.parse1(10.0pt;font-family:"Courier New";color:navy'>InterfaceCompiler.java:222<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.compiler.mxml.Compiler.parse1(font-family:"Courier New";color:navy'>Compiler.java:95<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.compiler.API.parse1("Courier New";color:navy'>API.java:2306font-family:"Courier New";color:red'>)font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.compiler.API.parse1("Courier New";color:navy'>API.java:2259font-family:"Courier New";color:red'>)font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.compiler.API.batch2("Courier New";color:navy'>API.java:367font-family:"Courier New";color:red'>)font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.compiler.API.batch("Courier New";color:navy'>API.java:1108font-family:"Courier New";color:red'>)font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.compiler.API.compile("Courier New";color:navy'>API.java:1281font-family:"Courier New";color:red'>)font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.compiler.API.compile("Courier New";color:navy'>API.java:1201font-family:"Courier New";color:red'>)font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.tools.Compiler.mxmlc("Courier New";color:navy'>Compiler.java:24010.0pt;font-family:"Courier New";color:red'>)10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at flex2.tools.Compiler.main("Courier New";color:navy'>Compiler.java:5310.0pt;font-family:"Courier New";color:red'>)10.0pt;font-family:"Courier New"'><o:p></o:p> font-family:"Courier New";color:red'> at net.sf.jasperreports.export.flex.JRSwfExporter.exportReportToStream(<span style='font-size:10.0pt;font-family:"Courier New";color:navy'>JRSwfExporter.java:268<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<span style='font-size:10.0pt;font-family:"Courier New"'><o:p></o:p> color:red'> at net.sf.jasperreports.export.flex.JRSwfExporter.exportReport(<span style='font-size:10.0pt;font-family:"Courier New";color:navy'>JRSwfExporter.java:177<span style='font-size:10.0pt;font-family:"Courier New";color:red'>)<o:p></o:p> </div>

Would you provide some details on how you’re calling this, which branch (e.g. Compiler is now known as Mxmlc on the trunk)? You need to have all libs from trunk/lib on the classpath.
- Jono
From: chauncy <[email protected]>
Reply-To: <[email protected]>
Date: Thu, 17 Apr 2008 10:31:31 -0700
To: <[email protected]>
Subject: Batik-related compiler issue
A new discussion was started by chauncy in
Developers --
 Batik-related compiler issue
I received this error calling the flex2.tools.Compiler’s main[] method. The MXML input compiles successfully in the Flex 2 builder. I wanted to check to see if anyone had experienced this before digging deeper into source code.
--Scott
Error: org.apache.batik.css.parser.Parser.getLineNumber()I
java.lang.NoSuchMethodError: org.apache.batik.css.parser.Parser.getLineNumber()I
 at flash.css.StyleParser.getLineNumber(
StyleParser.java:208
 at flash.css.StyleDocumentHandler.startFontFace(
StyleDocumentHandler.java:100
 at org.apache.batik.css.parser.Parser.parseFontFaceRule(
Parser.java:484
 at org.apache.batik.css.parser.Parser.parseStyleSheet(
Parser.java:224
 at flash.css.StyleParser.init(
StyleParser.java:172
 at flash.css.StyleParser.<init>(
StyleParser.java:106
 at flash.css.StyleSheet.parse(
StyleSheet.java:54
 at flex2.compiler.mxml.analyzer.SyntaxAnalyzer.parseStyle(
SyntaxAnalyzer.java:551
 at flex2.compiler.mxml.analyzer.SyntaxAnalyzer.analyze(
SyntaxAnalyzer.java:122
 at flex2.compiler.mxml.dom.StyleNode.analyze(
StyleNode.java:50
 at flex2.compiler.mxml.dom.AnalyzerAdapter.traverse(
AnalyzerAdapter.java:172
 at flex2.compiler.mxml.dom.AnalyzerAdapter.analyze(
AnalyzerAdapter.java:164
 at flex2.compiler.mxml.analyzer.SyntaxAnalyzer.analyze(
SyntaxAnalyzer.java:55
 at flex2.compiler.mxml.dom.Node.analyze(
Node.java:47
 at flex2.compiler.mxml.InterfaceCompiler.parse1(
InterfaceCompiler.java:222
 at flex2.compiler.mxml.Compiler.parse1(
Compiler.java:95
 at flex2.compiler.API.parse1(
API.java:2306
 at flex2.compiler.API.parse1(
API.java:2259
 at flex2.compiler.API.batch2(
API.java:367
 at flex2.compiler.API.batch(
API.java:1108
 at flex2.compiler.API.compile(
API.java:1281
 at flex2.compiler.API.compile(
API.java:1201
 at flex2.tools.Compiler.mxmlc(
Compiler.java:240
 at flex2.tools.Compiler.main(
Compiler.java:53
 at net.sf.jasperreports.export.flex.JRSwfExporter.exportReportToStream(
JRSwfExporter.java:268
 at net.sf.jasperreports.export.flex.JRSwfExporter.exportReport(
JRSwfExporter.java:177
View/reply at Batik-related compiler issue
<http://www.adobeforums.com/webx?13@@.59b50561>
Replies by email are OK.
Use the unsubscribe
<http://www.adobeforums.com/webx?280@@.59b50561!folder=.3c060fa3> form to cancel your email subscription.

Relation of issue materials with vendor number???

Hi Gurus!!!!
Can anyone tell me that can I find the vendor number by giving material document number and movement type type: 201. i.e. is there any relation of vendor number with issue material..........
Please give me any solution!!!
With regards
Pardeep Sharma

Hi,
Pls go to MSEG table, provide the material no in MATNR field and vendor no in LIFNR field and movement type as 201 in BWART field.
You will get the list of material document nos in the system against the given material no.
Then you can go to MB03 t-code, key in the material document no and get complete details.
Hope this helps.
Regards,
JLN

SWFLoader loded swf and relative path issue

Hi,
Before explaining the problem, let me describe the usecase.
I have dashboard flex application hosted on Host1.
I have another flex application which acts as plugin to dashboard and is hosted on Host2.
I am using proxy to load plugin into dashboard using SWFLoader. With proxy SWFLoader in dashboard thinks that the plugin is coming from same host.
For plugin to load I specify SWFLoader source something like - source="Proxy/Host2WebappDir/plugin.swf.
Everything is fine upto this point. plugin.swf get loads successfully without any issue.
Now the problem -
If plugin.swf made some request - the url path of that requrest is expected to be relative - i.e. if it make request say getIndianStates.xml, I am expecting the request should look for resource at "Proxy/Host2WebappDir/getIndianStates.xml". Instead it tries to look for getIndianStates.xml into dashboard hosting directory on Host1.
Can this issue be resolved without making any modification in source of plugin.swf.
Thanks in advance,
Prithveesingh Zankat.

I don’t know if any way to fix this without changing the URL the plugin wants to load. Now if the plugin stores that URL in a publicly accessible variable, you might be able to access it from the main SWF and change it. But it would be better to have the plugin detect relative paths and make sure they are relative to the SWF. The SWFLoader component uses a LoaderUtil class to do that for SWFs it loads, but loads that don’t use SWFLoader need similar fix ups.

Cache-flush VM-related performance issue

Dear forum,
I've got a peculiar performance issue going on with the BDB pagecache being flushed to disk. I've managed to reproduce the issue perfectly on three out of three quite different systems that I've tried on, so it is at least quite well-defined.
My usage pattern for the database in question is such that I periodically (perhaps once every 10-60 seconds or so) need to read through an amount of values (around 500-2000 or so) from a database containing a rather large amount (in the millions, at least) of keys. There are a few writes for every such batch, but not very many (a couple of tens). The keys that are read each batch are quite random, and very likely to be completely different from batch to batch. The database is a DB_HASH.
When I do that, BDB seems to dirty a lot of pages in the page cache (which I have currently sized at 512 MB so that pages don't have to be forced out from it), from what I can tell by manipulating refcounts and stuff, so all in all, a single batch seems to dirty some 10-40 MB or so of the mmapped cache region. (I check this using pmap -x on Linux.) Note that when I speak of pages and the dirtying of them here, I mean at the VM level, not the BDB level.
A while after this has happened, the VM comes around and wants to flush the dirty pages to disk, so it batches writes of large portions (often the entire set of dirty pages, but sometimes it only does 10-20 MB or so at a time; this detail shouldn't matter) of the dirtied pages to the backing block device. Since the dirty pages are often rather interspersed in the region file, such a flush usually requires a couple of thousands of write ops, so it might sometimes take up to 10-20 seconds for the requests to complete.
If the program, then, again tries to dirty any of the pages while they are waiting to be flushed, which is often the case, the VM will block it until the page in question is flushed. This means that the thread in question might very well be blocked for up to 20 seconds, causing quite annoying wait times.
How to deal with this problem? I've considered trying to put the region files on tmpfs or so, but that seems like such an excessive measure for a problem which, from what I can tell, should be commonplace.
On a very related note, I've noticed a large discrepancy in the I/O performance between the systems I've tried this on. Two of the systems in question manage to carry out some 200-500 write ops per second on my test load, while the third manages closer to 2000-3000 write ops per second, which makes quite a difference. What makes it very weird is that the faster system uses the exact same hard drive as one of the slower systems. I know this isn't exactly a BDB-specific question, but I thought someone around here might have experience in the matter. All three systems use Linux and S-ATA hard disks (not SSDs), but they use different S-ATA host adapters, different kernel versions and are configured in quite different ways.
Thanks for reading my wall of text! I'm sorry for dragging on so long, but I didn't know how to describe the situation more briefly.
Edited by: Dolda2000 on Mar 23, 2013 8:08 AM

As a follow-up on this, it appears that the blocking behavior was introduced in Linux 3.0 to stabilize pages under writeback:
http://lwn.net/Articles/486311/
It seems that the commits that introduced the behavior can be safely patched away, and also that it is due to change in 3.9, but for now, this is not the route I took to solve it.
Rather, I wrote a patch to Berkeley DB to allow me to store the region files in another directory than the environment root directory, and used it to store them in /dev/shm -- that is, on tmpfs, which avoids writeback of the region files altogether.
If you want the patch, it is here for db4.8 (which what Debian Stable uses), and here for 5.1, which is what Debian Testing uses.
(For some reason, the hyperlink format suggested by the forum doesn't seem to be working?)

BDC Related Upgrade issues

Hi every one,
I want to know wat are the issues while doing a version upgrade.
I have the knowledge of Dynpro missing ,
Screen Field related problem and Program itself missing the target system.
Pls .. tell me .some other issues...
Thanks Everyone in advance

Run the BDC and check for errors is the only way.
If you can change the BDC to BAPI or another FM then you should not have this problem in the future. As you can get problems with Upgrade, the same can also happen for support packs.
Message was edited by:
Martin Shinks

Cannot find relation - Known Issue?

Oracle Forms Builder is giving me the following error:
FRM-41104: Cannot find Relation: Invalid ID
I've not defined any calls to 'FIND_RELATION' - it seems it might be an internal error. Is this a known issue?
Thanks,
Oliver White

Dear Oliver,
If you make relation between Datablocks Oracle Form will automatically create a trigger on the master datablocks called "ON-POPULATE-DETAIL". That trigger contain "FIND-RELATION" function. If I'm not wrong, maybe the relation of your master datablock have been modified or some other error(There are many reason for that error that I can't list here).
My suggestion, I recommend you to delete the relation and re-create it again. Hope this help.
Regards,
Franko

Language related performance issues in PS HRMS

Dear experts,
I was just verifying a PS HRMS application(enterprise 9.1) performance and I found out that the language I select while logging in is drastically affecting the end user performance.
The verification for all languages were done from same location(suspected the issue could be location\network specific).
      Any suggestions/recommendations/insights that would help me understand this issue better would be welcome!
     Best Regards,
A   Arun

I've heard this issue before. If you check the query being executed, you'll see that when you're working in a non-base language, that the related language records are joined in as well. If you're searching in a big record (PS_JOB e.g.), you can thus end up with a much more costly query. I don't have a solution just right away on how to force lookups etc. to not check unneeded language stuff, but knowing the base issue might point you in a good direction to look further.

JNLP related-content issue in JRE 7u5 Sub Menu Item link not working

we are having an issue with our existing Web Start Application in Java Version 7 Update 2 and above where the Sub Menu items are not being associated with Internet Explorer with href link as Target when using <related-content> tag in JNLP. This is working fine in JRE 1.6, JRE 1.7.0 and 1.7.1. I have tried using Integration Service to programatically create these shortcuts in JRE 1.7.5 but was unsuccessful.
<jnlp spec="6.0+" codebase="http://..." href="xyz.jnlp">
<information>
<title>ABC</title>
<vendor>ABC Vendor</vendor>
<homepage href=""/>
<description>ABC Desc</description>
<description kind="short">ABC Desc Short</description>
<icon href="abc.gif" kind="default"/>
<offline-allowed/>
<shortcut online="true" install="true">
<desktop/>
<menu submenu="ABC"/>
</shortcut>
<related-content href="help.doc">
<title>ABC Help</title>
<icon href="help.gif"/>
</related-content>
<related-content href="Uninstall.html">
<title>Uninstall Page</title>
<icon href="uninstall.gif"/>
</related-content>
</information>
<security>
<all-permissions/>
</security>
<update check="timeout" policy="always"/>
<resources>
<java initial-heap-size="128m" max-heap-size="256m" version="1.6+"/>
<jar href="ABC.jar" download="eager" main="true"/>
</resources>
<application-desc main-class="com.main.Abc"/>
</jnlp>
Any help in this regard would be greatly appreciated.

I haven't filed this as a bug in Java development yet but am going to do so soon, In the mean time i was hoping to see if anyone else is on the same boat as me and if there was a work around.

SOFTWARE related superdrive issues!!!

The problems with the superdrive on my iMac G4 started with the upgrade to 10.4.9 an still persist with 10.4.10.
The problem is quite simple, the DVD drive does not recognize any previously burned DVD-R (1X or 2X) disks. It reads CDR's without problems, it even reads DVD+R.
The G4 takes some time to recognize a previously burned CDR at slower speed, but it works. It fails to write a CDR at slower speed but CAN write and later read a CD burned at fastest speed.
It simply cannot read any music CD's (it sits inside the drive and later spits it out).
It CAN read commercial DVD movies.
It CANNOT read DVD -RW previously recorded media.
The drive is a SONY DVD RW DW U10A revison A13b
The problem is not the media as I can easily read all the aforementioned disks in my Powerbook G4.
What is happening? help anybody?

Hi, some checks:
note existing values.
run this command on your client machines to confirm their SUS config:
defaults read /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
run one of these commands on say two client machines to confirm the SUS config issue is DNS related:
defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL http://1.2.3.4:8088/index.sucatalog
defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL http://5.6.7.8:8088/index.sucatalog
server1 ip: 1.2.3.4 subt for configured server ip address
server2 ip: 5.6.7.8 subt for configured server ip address
do for server3 as well
See how you go

Related Topics issue

I have an issue with my Related Topics controls. They are set
up to display as menus, and they display as menus when I preview -
however, when I compile, they display as dialogs.
The code to display the controls contains this line:
<PARAM NAME="Command" VALUE="Related Topics,MENU">
In other threads, I've seen reference to <param
name="DialogDisplay" value="1"> in the green code, but I suspect
that that is only relevant to See also controls. I can't find an
obvious equivalent for Related topics controls.
Can anyone help?

Hi all and welcome to the community TWSisters
In case it will help here, I just inserted two different
RelatedTopics controls. One configured to use the popup and the
other configured to use the dialog. Perhaps you can compare my code
to yours to ascertain any differences.
Popup
=================================================

<OBJECT
CLASSID="clsid:ADB880A6-D8FF-11CF-9377-00AA003B7A11"
ID="RelatedTopics" TYPE="application/x-oleobject" >
<PARAM NAME="Command" VALUE="Related Topics,MENU">
<PARAM NAME="Button" VALUE="Text:Related Topics">
<PARAM NAME="Font" VALUE="MS Sans Serif,8,0,,">
<PARAM NAME="Item1" VALUE="Add a Loading
Screen;..\Unit10\Add_a_Loading_Screen.htm">
<PARAM NAME="Item2" VALUE="Add a Slide
Label;..\Unit7\Add_a_Slide_Label.htm">
</OBJECT>
Dialog
=================================================
<object
CLASSID="clsid:FF80F713-5DC6-11d0-A7B4-00AADC53E937"
BORDER=0
id=OBJECT1
style="margin-top: 0px;
margin-bottom: 0px;
margin-left: 0px;
margin-right: 0px;
vertical-align: baseline;"
align=bottom>
<param name="_Version" value="65536" >
<param name="_ExtentX" value="2117" >
<param name="_ExtentY" value="556" >
<param name="_StockProps" value="13" >
<param name="ForeColor" value="0" >
<param name="BackColor" value="14215660" >
<param name="UseButton" value="-1" >
<param name="UseText" value="0" >
<param name="ControlLabel" value="Related Topics" >
<param name="UseIcon" value="0" >
<param name="Items" value="Add a Slide
Note;..\Unit7\Add_a_Slide_Note.htm$$**$$Add a Sound Effect to an
Object;..\Unit7\Add_a_Sound_Effect_to_an_Object.htm$$**$$" >
<param name="Image" value="" >
<param name="FontInfo" value="MS Sans Serif,8,0,," >
<param name="_CURRENTFILEPATH"
value="C:\Rick\Captivate2Instructor\Unit14\Publish_a_Zipped_Flash_Project.htm"
>
<param name="_ID" value="OBJECT1" >
<param name="UseMenu" value="0" >
<param name="Frame" value="" >
<param name="Window" value="" >
</object>-->
<OBJECT
CLASSID="clsid:ADB880A6-D8FF-11CF-9377-00AA003B7A11"
ID="OBJECT1" TYPE="application/x-oleobject" >
<PARAM NAME="Command" VALUE="Related Topics">
<PARAM NAME="Button" VALUE="Text:Related Topics">
<PARAM NAME="Font" VALUE="MS Sans Serif,8,0,,">
<PARAM NAME="Item1" VALUE="Add a Slide
Note;..\Unit7\Add_a_Slide_Note.htm">
<PARAM NAME="Item2" VALUE="Add a Sound Effect to an
Object;..\Unit7\Add_a_Sound_Effect_to_an_Object.htm">
</OBJECT>
Hopefully this helps... Rick

Re-Imaging and Security Related Trust Issues

Hello,
Yesterday, I asked the question about how to fix having trust issues all the time when re-imaging computers in a school environment. I am using Windows Server 2008R2 and a Windows 7 Image created in FOG image program. The machines we use are HP5100 Desktop
machines. I didn't feel that I properly explained in the first post how we re-image the machines. I am hoping this will give you a better idea of what we are doing, and you can help me figure this issue out. Thank you in advance.
Step 1: Bring Windows 7 Image down to an HP5100 Desktop, update plugins and send image update back up in Fog
Step 2: Delete all machines out of the active directory for specified labs.
Step 3: Re-image school labs of 30 machines each
Step 4: Rename each machine with unique id, example : BJSHS203S01DW7 (name of school, lab #, Student #, and OS)
Step 5: Join the domain
Step 6: Make necessary adjustments, and use deep freeze to freeze machines up
Those are the steps we use when re-imaging, and so far for the past two years we have sporadic issues with two labs in particular with receiving trust-relationship message, and also sometimes get a message that says there are no servers available. When this
happens, then I need to go to the machine unfreeze it, unjoin the domain, delete the name from the active directory, and then rejoin the domain. Sometimes this works but more often than not it doesn't work so well, and then I have to go through the whole process
again. We do not use sysprep on our machines.
So my question is this : What am I doing wrong? Is there anything you can recommend to fix this problem so that I don't have to continue to fix the machines and waste time?
Thank you in advance, I appreciate your help!!
Angie

Deep Freeze may be causing your problems. Have you read this article from Deep Freeze makers about trust relationship issues?
http://support.faronics.com/Knowledgebase/Article/View/365/8/computers-running-deep-freeze-loose-connection-to-or-fall-off-the-domain-with-an-error-that-the-trust-relationship-between-the-domain-controller-and-the-workstation-has-failed

Liveview not picking up my template, possibly a relative links issue?

Hi Guys,
I'm upgrading my current website to a new look, the new website has a template and CSS pages. The problem is that when I make a new page and look at it in live view the template and CSS pages don't work
I had someone build the new template and CSS items for me along with a few sample pages. They all work great with liveview and the main difference I can see is the links. In the pages built for me all the links in the template file are coded as (for example) <a href="../index.html"> but when I go FILE - NEW - PAGE FROM TEMPLATE the links spit out as <a href="file:///C|/beta/index.html"> and the liveview doesn't work at all.
I'm including some screenshots of the dreamweaver screen to illustrate what I"m talking about. Any info would be helpful. This is the first time I've worked with templates and CSS so it's probably something very basic, but I'm just stumped. I thought it might have something to do with setting up the site as relative to root or document but that didn't seem to make a difference.

the links spit out as <a href="file:///C|/beta/index.html"> and the liveview doesn't work at all.
That almost certainly means that you haven't defined a site in Dreamweaver. Without a site definition, Dreamweaver cannot create the correct links. See Setting up a Dreamweaver site in the Help files.
Furthermore, since you are creating pages from a template, the template must be in a folder called Templates in the site root.

PLD & Relate To Issue

All,
I am running 2007 A(8.00.176) SP: 00 PL:35. I am wanting to display a UDF on Order Item form I created in the BP's Addresses in the Page Header of the PLD form. I am trying to relate the Ship-To Code to the Business Partner Address. When I do this I get over 1,200 pages of duplicated items.
What am I doing wrong?
Dennis

Yes, it's clearer now, thank you.
I don't think it's possible to achieve this way. What you can do is to create another UDF on the Sales Order and assign a formatted search to display there the value of the BP Addresses UDF respectively.
Then you can display this field from the SO on the layout.
Regards,
Nat

EP 6.0 Innerpage, Navigation Panel, Related Links issues

I have been trying to reposition the navigation panel and related links panel on my pages but haven't had any luck. What I am trying to do is I want to be able to create a template where I can move the relate links panel to any location I want. I also want to be able to rename the title of the related links panel. Please advice.
Message was edited by: Jaturon Lerlop

OK. what i did was that I created a whole new portal desktop with customer page framework and layout. I also modified SAP-supplied par files in order to customize masthead, toolbar, navigiation panel etc.
There is a tutorial on how to create a portal desktop. search around you will find it.

Homehub related speed issue

Recently our household has increased from 3 to 4, we have 2 laptops, 4 desktops, 1 mobile, 1 NAS and a media extended attached now. It seems that the Internet slows down to about 3meg over time, a quick off and on of the homehub fixes the issues.
Is it simply a case of too many devices, or is that we have an issue with our home hub?

I'm assuming most of that is connected through wireless which at best of time halfs the infinity speed. If this is the case then you probably have wireless inteference from other networks or household devices and don't forget that your connection it being used by so many devices you are unlkely to get the actual speed on a testing site. Try using an Ethernet connection when the speeds seem low and see if it improves. I have had to make some assumptions here bit I hope it helps

Related to issues

Similar Messages

Maybe you are looking for