Related to medruck
i want to change the layout of a medruck and i want to add a logo of my own .. How can i do. Can anybody help me..
Related to medruck
Posted: Sep 4, 2006 5:33 AM Reply E-mail this post
i want to change the layout of a medruck and i want to add a logo of my own .. How can i do. Can anybody help me..
Similar Messages
-
Printing of Excise and other CIN related conditions in PO
Hi,
In Tax procedure (TAXINN), i have marked the print indicator for Excise related conditions assuming that these conditions should be printed in the PO output.
But it is not happening.
Please guide me.
Regards,
SattujHi,
You have to modify the standard form MEDRUCK to suit your requirements. By default the Excise tax condition values will not get printed in the PO. The standard form has to be modifed.
You can use function modules to take care of this requiremnt and the following tables may be helpful.
KONP, T685T,J_1IEXCTAX,J_1IMTCHID,KONV,J_1IMATEXP
Hope this helps.
Thanks,
Viswanath -
Issue in creation of plant related data at receiving server using BD10
Hi all,
This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
When i entered into Log-
1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
My segemnt is as follows-
ZMATMAS05 matmas05
E1MARAM Master material general data (MARA)
Z1KLART KLART----
My extention
E1MARA1 Additional Fields for E1MARAM
E1MAKTM Master material short texts (MAKT)
E1MARCM Master material C segment (MARC)
Z1AUSPM E1AUSPMDistribution of Classification:----
My extention
E1MARC1 Additional Fields for E1MARCM
E1MARDM Master material warehouse/batch segment (MARD)
E1MFHMM Master material production resource/tool (MFHM)
E1MPGDM Master material product group
E1MPOPM Master material forecast parameter
E1MPRWM Master material forecast value
E1MVEGM Master material total consumption
E1MVEUM Master material unplanned consumption
E1MKALM Master material production version
E1MARMM Master material units of measure (MARM)
E1MBEWM Master material material valuation (MBEW)
E1MLGNM Master material material data per warehouse number (MLGN)
E1MVKEM Master material sales data (MVKE)
E1MLANM Master material tax classification (MLAN)
E1MTXHM Master material long text header
E1CUCFG CU: Configuration data
E1UPSLINK Reference from Object to Superior UPS
Thanks.
Edited by: sanu debu on Apr 27, 2009 7:10 PMCREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ? -
Relative path for images in RTF templates
Hi everybody!
When I insert an image in a RTF template, I put its path into the web dialog, in order to see correctly the picture when I open the report from the xmlp server, in this way: url:{"http://servername/analytics/res/Images/image.bmp"}
How can I make this path relative, in order to see the images even if the server name changes?
Thanks so!
FrancescoHi Tim,
I am using BIP 10.1.3.3.2. I am able to access system variable CURRENT_SERVER URL.
Steps:
<?param@begin:CURRENT_SERVER_URL?>
<xsl:value-of select="$ CURRENT_SERVER_URL"/>
CURRENT_SERVER_URL is getting printed in BI Publisher. Value displayed is http://xx4697.xxx.co.in:9704/xmlpserver.
Now we are importing xsl into RTF template. File aaa.xsl is stored at [BIP_Installation_Directory\oc4j_bi\j2ee\home\default-web-app]
We have hardcoded the path for XSL in RTF. The path is <?import: http://xx4697.xxx.co.in:9704/aaa.xsl?>
As we want to set dynamic path we changed hardcoded xsl path to <?import: {$CURRENT_SERVER_URL}/../aaa.xsl?> but it is not working. Sometimes BIP is taking local path of MyDocuments folder and sometimes Desktop path. If I put that XSL file in MyDocuments folder or Desktop, it is working fine. But ideally it should refer [BIP_Installation_Directory\oc4j_bi\j2ee\home\default-web-app] path...
Thanks,
Amit D -
"Failed to open the connection" problem related to multiple tables in the report?
Post Author: Gadow
CA Forum: Data Connectivity and SQL
System specifics:
Web environment using ASP.Net 2.0 (from Visual Studio 2005 Professional)
Crystal Reports 2008, v. 12.0.0.549, Full
We have set up the following method for displaying reports via our website:
User is sent to a report-specific page. The user is given some filtering options specific to the report that will be viewed. When the user has specified the data filters, the user clicks a button.
The page wraps up the report parameters -- selection query, formula values, report location, the name to be displayed, etc. -- into a class which gets put into the Session object.
The page redirects to DisplayReport.aspx. ALL reports redirect to this page.
DisplayReport.aspx retrieves the report parameters from Session. A ReportDocument object is created and loaded, then set with the data from the parameters class.
A ConnectionInfo object is created and set with the relevant log on credentials. All of the reports draw from the same database, so the connection information is hard-coded as the same for all reports. The page then iterates through all of the tables in the Database.Tables collection of the ReportDocument and calls ApplyLogOnInfo to each table using the ConnectionInfo object.
The page is rendered and the user gets the filtered report.
We currently have seven reports. Five reports work fine and display the correctly filtered data with no error messages. Two reports generate a Failed to open the connection error and do not display. I have verified that the queries being sent to DisplayReport.aspx are valid, and as I said the connection information itself is hard-coded in the one page that displays the reports and this is identical to all reports.
The five reports that do work all have a single data table, either an actual database table or a single view. The two reports that do not work all have multiple tables. As far as I can tell, this is the only difference between the sets; all seven reports are based on the same DSN and I have verified the database on all of the reports. All of the reports were written using Crystal Reports 8, and all of the reports display fine in a Windows app I wrote some years ago using Crystal Reports 8. Again, the only difference between those reports that do work and those that do not is the number of tables used in the report: one table or view in the reports that display, more than one table (tables only, none use views) in the reports that do not display.
As for the code I am using, below are the relevant methods. The function MakeConnectionInfo simply parses out the components of a standard SQL connection string into a ConnectionInfo object. DisplayedReport is the ID of the CrystalReportViewer on the page.Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs)
Dim o As Object = Session("ReportParams")
Dim ReportURL As String = ""
'Verify that there is a ReportParameters object
If o Is Nothing OrElse o.GetType IsNot GetType(ReportParameters) Then 'Redirect to the error page
Response.Redirect("/errors/MissingReport.aspx")
End If
ReportParams = CType(o, ReportParameters)
'Verify that the report exists
ReportURL = "/Reports/ReportFiles/" + ReportParams.ReportName
ReportPath = Server.MapPath(ReportURL)
If Not File.Exists(ReportPath) Then
Response.Redirect("/errors/MissingReport.aspx?Report=" + ReportParams.ReportTitle)
End If
InitializeReport()
End Sub
Protected Sub InitializeReport()
Dim RD As New ReportDocument
Dim CI As ConnectionInfo = MakeConnectionInfo(DB_Bonus)
Dim RPF As CrystalDecisions.Shared.ParameterField = Nothing
RD.Load(ReportPath)
If ReportParams.SelectString <> "" Then
Dim Adapt As New SqlDataAdapter(ReportParams.SelectString, DB_Bonus)
Dim DS As New Data.DataSet
Adapt.Fill(DS)
RD.SetDataSource(DS.Tables(0))
End If
For Each kvp As KeyValuePair(Of String, String) In ReportParams.Formulas
Dim FFD As FormulaFieldDefinition = Nothing
Try
FFD = RD.DataDefinition.FormulaFields(kvp.Key)
Catch ex As Exception
'Do nothing
End Try
If FFD IsNot Nothing Then
Select Case FFD.ValueType
Case FieldValueType.DateField, FieldValueType.DateTimeField
If IsDate(kvp.Value) Then
FFD.Text = String.Format("Date()", Convert.ToDateTime(kvp.Value).ToString("yyyy, MM, dd"))
Else
FFD.Text = "Date(1960, 01, 01)"
End If
Case FieldValueType.StringField
FFD.Text = String.Format("""""", kvp.Value)
Case Else
'For now, treat these as if they were strings. If things blow up here,
'we will need to add the appropriate formatting for the field type.
FFD.Text = String.Format("""""", kvp.Value)
End Select
End If
Next
For Each T As CrystalDecisions.CrystalReports.Engine.Table In RD.Database.Tables
Dim TLI As TableLogOnInfo = T.LogOnInfo
TLI.ConnectionInfo = CI
T.ApplyLogOnInfo(TLI)
Next
DisplayedReport.ReportSource = RD
End Sub
Does this approach not work with reports containing multiple tables, or is there something I'm missing? Any meaningful suggestions would be much appreciated.Dear Dixit,
Please refer to the Crystal report landing page to get the details
information about the support for crystal report issues.
Please use the following thread to post your questions related to
crystal report.
SAP Business One and Crystal Reports
Regards,
Rakesh Pati
SAP Business One Forum Team. -
Hi All,
While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
This is a custom notification.
Please help.
Thanks
RaghavaHI All,
Please help on this issue.
Thanks
Raghava -
Error 513 while creating a support message (related to roles/profiles)
Hello everyone,
my user is getting the generous error 513 while sending a support message either on the SAP GUI or Workcenter. I am trying to implement a profile for a key user, who can display, reply and create simple messages without putting in technical data.
I gave him the following roles:
SAP_SMWORK_INCIDENT_MAN
SAP_SUPPCF_CREATE
SAP_SUPPCF_ADMIN
SAP_SUPPDESK_DISPLAY
SAP_SUPPDESK_CREATE
SAP_SV_FDB_NOTIF_BC_CREATE
and a generous role with the missing parts:
ZSAP_SMWC
When I tried sending a message with the GUI I used SU53 to find out which rights are missing and added them to ZSAP_SMWC. Now I got all of them and the SU53 replies that there are no more missing rights.
Thing is: When I add the profile SAPALL to my user, it works just fine. This is leading me to a problem i can't solve._
I also have to say that I accidently deleted some flags inside of sap_suppcf_create without copying it. Is there a way to restore SAP standard settings?
Thanks in advance,
HendrikI just seen the following SAP Knowledge Base Article related to ST 400 SP24:
[1522809 - Solution Manager: Because of error 513, no message was created in Support Desk System|www.service.sap.com/sap/support/notes/1522809 ]
Regards, Ruediger -
PO can not be created due of amount value approved in related PR
Hello Gurus,
My client would like to set an error message while creating a PO related to a PR when the net price item differs in more than 10% from the value released in the PR related. All the PR are subject to release strategies with total amount as a chareacterisitc. Is this possible to set? Could please kindly provide me the path or any clue on how to do this?
Currently when a PO is created in relation to a PR system allows to change the net price without restrictions.
Please advice.
ThanksI assume you do not work with PO approvals?
Normally when you create PR, system picks Price frm the material master you can try to control PO price maintain Tolerate Key "PE" for Cocode here.
SPRO -> MM -> Purchasing -> Purchase order -> Set Tolerance Limits for Price Variance
This will check the PO price VS the Material Master valuation Price (this will not be useful if the PR price has been manually changed )
But if a check against PR Value specifically is reqd. , In suchcase, there is no standard setting/config with which you can have system issue an error when the PO value exceeds the PR amount by a certain %.
The ME_PROCESS_PO_CUST BADI could be used, where you enter this validation Logic. -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Message no. SG028 Ambiguous... exchange rate relation
Hi Friends,
I have a free of charge order. While doing the Post Goods Issue step, I am getting the following error message
Ambiguous EUR/USD exchange rate relations
Message no. SG028
I have searched in the forum and made sure that in transaction OB08 Exchange Rate EUR/US and USD/EUR (Exchange Rate Type M) has maintained properly in the system.
I have also made sure that the entries are properly maintained in SPRO - General Settings - Currencies - Define Translation Ratios for Currency Translation.
But still the error is coming, I saw in one thread, some one has reported the same problem even after maintaining the exchange rates in OB08, but no solution was suggested as far as I check. could anyone please give some inputs why the same error coming even though the exchange rates are maintained and how to fix this issue as I stuck in Post Goods Issue step
Thank youHi Christian,
Thanks for your time.
I've found the below entries in OBBS
M USD EUR 01.01.1900 100 : 1
M EUR USD 01.01.1900 1 : 100
Alternative currency is blank in both entries
In OB07 for exchange rate Type M all the fields (Ref. currency, Buy and Sell rate) and the check boxes are blank. it is still unclear for me being a logistics guy
While doing Post Goods Issue in other scenario I didnt have any error where currency GBP EUR invovled. In this case the OBBS entries EUR/GBP as below
M GBP EUR 01.01.2000 1 : 1
M EUR GBP 01.01.2000 1 : 1
Alaternative currency is blank in this case as well.
Does the valid from date or the ratio make any difference?
I could not clarify with my FI consultant as he is on vacation. Could you please let me know how to fix it.
Thank you -
Hi ,
This is regardsing Free goods related issue
" i have 3 types of materials(A,B,C)
1.If A sells quantity of 10, C will come as free(zero price)
2.And if B sells quantity of 10 again C will come as free (zero price)
3.And also if A(5) & B(5) together sells quantity of 10 C will come as free.
Please provide the suggestive solution.hi,
1 & 2 case will work, but the 3rd Case will not work. Please note the following
"Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: With material 1, material 2 and material 3 are free of charge or If material 1 and material 2 are ordered at the same time, then material 3 is free of charge.
Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
Free goods are only supported for sales orders with document category C (for example, not quotations).
Free goods are not supported for deliveries without reference to a sales order.
Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix."
CHAN -
Table relations lost in Crystal Reports when connecting directly to SAP R/3
Currently, we are trying to create reports in CR2008 directly on SAP R/3 tables. We encounter the following problems:
- 1 it is quite difficult to find out which tables you need
- 2 if you import the tables into CR you have to define the relations between the tables again
This takes too much time and is way too complex.
So the question is: should I define infosets and load these into CR? what is the general "working method"/procedure to deal with these issues?Hi,
in case you not familiar with the tables from your ERP system I would recommend using an InfoSet or ABAP Functions as a source.
ingo -
ISE 1.2 Authentication fails for 2nd AD domain with the forest trust relation
We are running cisco ISE 1.2, we have new AD domain with forest trust relation between both the new and the old. authentication to with the new domain fails.
Is there any requirements or configurations change needs to be done to make it success?Use the license that is currently on your ISE. If your account has access to download the software, then you are good. The license will not change during the upgrade. If you are using ISE 1.2 Patch 8 or above, then you are using the same Base/Plus?Apex Licensing model.
If you are not yet on Patch 8, the you are using Base/Advanced and these will be converted during the upgrade.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton -
Third party process:Billing relevance 'B' order related and 122
I am facing the following problem: in Order related Billing according to order qty, the sales order bills what has been received on the third party PO in MM.
The following situation occurs: When I order 100, receive 100 and Bill 100: The sales order is fully billed. When I later return a quantity to the vendor in MM with a 122 referring to the PO, the sales order remains fully billed. There is no way I can find out which Sales order needs to be take action on (credit). Can someone help me finding out how I can select these sales orers after a 122?Ok, no problem.
At the client we have a very specific flow where receipts on a third party PO need to be billed daily when they happen and every receipt (better: any goods movement) needs a seperate billing document.
This is not covered in SAP standard. I wrote a program (functional) how SAP should find the billing relevant movements:
1) Go to the billing due list daily at 0:00
2) Check all related third party PO's and the movements
3) Check the sales flow of the relevant SO. Check which material doc has been billed (via reference field in the billing doc)
4) For all items not yet billed call function module GN_INVOICE_CREATE. (bill in case of 101 and 123 and credit in case of 102 and 122)
This works all fine until I found above issue: Fully billed items are removed from the billing due list even if there is a 122 or 102 afterwards on the PO. So I redesigned the program.
1) at 0:00 Select all movements on the system date for the specific flow (PO type and plant) via Material documet header and segment.
2) Via the account assignment in the material doc you have the Sales order. Then the same applies:
3) Check the sales flow of the relevant SO. Check which material doc has been billed (via reference field in the billing doc)
4) For all items not yet billed call function module GN_INVOICE_CREATE. (bill in case of 101 and 123 and credit in case of 102 and 122)
Here I am not using the due list and it solved my problem. -
Ship to party and vendor relation in third party process
Hello Experts,
I need your precious suggestions on my business requirement.
When we create the third party sales order system creates the Purchase Requisition and further PO is created through purchasing department.
Suppose in my third party sales order I have two items X & Y, and both need to deliver at two different ship to party XXX & YYY respectively. in order system determine plant 1000 for both materials based on plant determination (CMIR >> CMR >> MMR) and system generates PR.
I know while converting the PR to PO system check Source list (ME01) to determine the vendor. my requirement is I want to determine Vendor based on ship to party in sales order. suppose ship to party locations for XXX and YYY are Bangalore and Pune respectively and in both place we have different vendor. Both vendor manufacture product X & Y. so I want system should pick the vendor according to ship to party.
Is there any relation between ship to party and vendor which will work in third party processing ?
Kindly explain how I can achieve this requirement.
Thanks,I doubt this can't be achieved by SAP standard functionality. You may need to use user exit. Check Third party to purchase req user exit or purchase req user exit to fulfill the requirement.
Regards,
Maybe you are looking for
-
How do you email 1 page from a pdf in iBooks?
I have multi-page plans in iBooks and want to send only 1 page to a subcontractor and not the entire set of plans. How do you only e-mail one page of a multi-page PDF in iBooks? Thanks, Victor
-
Recaptcha Displaying Incorrect
I have noticed that reCaptcha is not displaying correctly. See the Screenshots Below: What renders on websites: What it should look like: I would assume this is an error in the CSS, however, we have no control over the CSS. I have seen this on multip
-
FCP is turning my stereo audio into mono... bleeding?
Final Cut Pro is somehow turning my audio, which is in stereo into mono. Meaning that on each channel, there is some bleeding going on from the other channel. What gives? This is not the case when I initially drag the file into the timeline, but does
-
Hi I am trying to access OWB design browser but I am getting the following error in my Apache error logs. /pls/wb_runtime_rep/wb_runtime_rep.wmp_api_call.home ORA-0 wb_runtime_rep.wmp_api_call.home: PROCEDURE DOESN'T EXIST I configured DADS from the
-
My itunes doesn't start anymore
I can't start Itunes. It seems to be active in the icons at the bottom of the sceen.