Related to MM02 Material Master

Hi All,
When I enter into MM02 for any material number through view basic data1 and without any change when I save it and came back, then in the description of the material word HELLO is added.
Every time when I save the transaction it adds HELLO word in the description of material upto 40 characters.
But if I come back without saving; it is not adding HELLO word in the description.
As far as I know this is done through any enhancement.
So please if anyone knows any enhancement for MM02 through which we can do the same changes , then let me know.
Waiting for reply.
Regards
Vikram

Hi Vikram,
  Active the bebugging mode before going to save the material master data and hit the save button. it will take you to debugging madoe. find the field name of Material description and put in the right side ( variable name ). You try in this way you can find easily. where it was written the code.
   If your a fucntional consultant ask your abap'r to check in this way.
Regards,
Saran

Similar Messages

  • Retail related fields in Material Master to be made optional in ECC 6.

    Hello All,
    We are upgrading from SAP 4.7 to ECC 6.0 in the current system the Field Selection Group 200 we have only 1 field MARA-SPART assigned and it is a mandatory field for some of the Field References.
    But in ECC 6.0, this Field Selection Group 200 contains MARA-BRAND_ID, MARA-BSTAT, MARA-FASHGRD, MARA-FREE_CHAR and MBEW-SPART. Now all these fields have become mandatory for the earlier Field references. But the requirement is to have only MBEW-SPART to be mandatory and rest others can be made optional. But the settings in OMS9 can be done only for the Field Selection Group as a whole and not at the individual field level.
    Please share your inputs if you have faced similar situation earlier.
    Regards,
    Purshoth

    Hi Purshothaman,
    aks your upgrade team if they activated warehouse management, AFS and/or Retail enhancement.
    See related Notes.
    Regards,
    Clemens

  • SIS in Material Master

    Dear Experts,
    Here i have to check field for SIS / LIS in material master so that it would automatically updates the Information System.
    Where i can find out SIS / LIS related field in material master data?
    Is Material Statistics grp relevant to this??
    do i need to see it in OMO1 ??
    Regards
    Swati Bhatt.

    Go to MM02 (Change Material)
    Here in Sales: Sales Org. 2 Screen you have a Matl Statistics grp. feild under Grouping Items Tab.
    Maintain this feild (most probably by "1").
    Hope this helps...
    Thanks,
    Jignesh Mehta

  • Adding a picture to material master data ....

    Hi Gurus, I have SAP ECC 6.0, I want add a picture for each material in my system. I am not using SAP Retail, just MM.
    How can I do for upload pics to material master data? .....
    Regards!
    Jose.

    Hi Jose,
    Go to MM02 Material Master Change Mode and in Menu bar Select System - Services for Object.
    This option will allow you to Create an attachment to Material master.
    Revert back in case doubts.
    Reg,
    Ashok
    Assign points if useful.

  • Material master problem

    Hi,
    The issue relates to the material master data in the organizational level screen where we have to enter the Plant and the Storage Location.Suppose we have 2 plants Bhatinda and Mundra and one each storage location Bhatinda Storage and Mundra Storage location respectively.
    While entering the plant if we select Bhatinda and in the storage location field we enter Mundra Storage location the system doesnt give any error but moves forward by updating the Plant also. In this case the plant gets updated to Mundra Plant.
    There is a requirement for an error/warning message when the wrong storage location is selected rather than system updating the plant field itself.

    Hi,
    System doesnt update Plant, rather it extends the material to new plant also. Now you can use the same material in both plants and set diff parameters in diff plants if reqd.
    Regards

  • How to activate the new fields on material master(MM01/MM02/MM03) for existing Materials

    Hi,
    We have a requirement to add  some custom fields as a new tab in additional data option(Descriptions, Unit of measure, etc.) in Basic data of Material master (MM01/MM02/MM03). I have successfully added and these custom fields and they are not part of standard(MARA, MARC) but a custom table and the updates are also done in custom table.
    For new materials, I can see the new tab in additional data screens of basic data view and I could successfully create/change/display using MM01/MM02/MM03. However I cannot see the new tab/fields for existing materials in the system in all 3 tcodes (MM01/MM02/MM03). This is not a main view in material master so that I can extend it by MM01.
    Is there any setting or mass generation program I have top perform so that I can see and maintain these new fields for existing materials. Appreciate any leads or help on this.
    Thanks,
    Harry

    Hello Harry,
    Goto t.code SPRO ---> Display IMG --->  Logistics - General --> Material master --> Configuring the material master --> Create program for customized screens
    Use the above path and create the screen and assign it to the sequence using the below link as reference.
    **************** - Tips - Implementing screen exits for MM01/MM02/MM03
    Regards,
    Thanga

  • Interface RW - error      can be related to MRP field in Material master

    Hello,
    Can an error in the area of invoices not being processed in Accounting  (with an error message talking about interface RW)  can be related to changed made to the material master of the product, in the MRP type changed from ND (No planning) to PD (MRP) ?
    Thanks for your thoughts on this
    KR - Loï

    Hi Loic,
    i have the same issue right now:
    System error: Inconsistency between Credit/debit indicator and amounts
    Message no. F5693
    Diagnosis
    When the FI/CO interface data was projected into the FI document, not all the amounts are positive. This is due to an inconsistency between the credit/debit indicator and the amount information in the FI/CO interface.
    System Response
    Negative amounts cannot be processed by the financial accounting application.
    Procedure
    This is a system error. Contact the SAP Hotline service.
    thing is that last friday this was working good, i have post several GR last friday and there was no issue then.. how did you solved this?
    thanks in advance

  • Add custom field in MRP area-MRP 2 in material master(MM01/MM02/MM03)

    Hi
    As per my requirementn we have to add one field in the Material master(MM01/MM02/Mm03). Mentioned path below.
    MM01/MM02)--> MRP1 tab --> in the MRP areas > click on MRP AREAS button>Pop will come with MRP AREA --> double click on entry > MRP area screen will appear> In MRP2 data tab> i've to add a new custom field. Program Name> SAPLMD_MGD1
    Screen --> 0040
    Is there any exit/customization which can be used to do this?
    i was unable to find a exit for the same.
    Thanks,
    Gauri

    Hi Gauri,
    See Note 44410 - Integrating cust.-specific fields in matl master, I think that it will help you
    Regards
    Eduardo

  • LSMW-Error during processing of BDC session change to material master MM02

    I have created an LSMW for changing material master data.  I recorded MM02 and using the "select views" screen selected the accounting 2 view and entered the information in the fields on that screen requiring changes.  I've set up all of the technical screens for the LSMW.  However, when I process the BDC session with "display errors only", the program stops at the select view screen with an error message "Select at least one view".  Any ideas how I can process through this screen so that the Accounting 2 screen opens in the BDC session?  One further note, I set that selection as a constant in the field mapping and conversion rules screen.  The field name recorded as KZSEL_05.

    hi
    one question how did you choose the view? i mean to ask by scrolling down using mouse or page down.
    the scrolling by mouse is not recognized by recording and that may be the error. so whenever you have to go down in screen please use page down not scrolling at least in LSMW.

  • Material Master Data related with an Asset

    Hi Guys
    I was told that the material master data that I am creating needs to be related with an asset hierarchy, any one know where Do I relate material master data with the asset hierarchy?
    thanks
    Carlos

    Hi,
    Though you Material grade is time dependent and sequentially changing.
    You can create 4 different DTP with Grade selection (only 1 Transformation).
    For example, 1 DTP with filter Grade A, another DTP with grade B, so on.
    and executive all 4 dtp sequentially and activate master data after every DTP run.
    Hope it will workout.
    Thanks,
    Balaram

  • Relating product compilaence with the material master in SAP R3 system

    Hai SAP Gurus,
    Please can you help me to mark a material in relation to the product compilance or regulatory requirements like RoH, CSA, EC, Copy exact in the SAP Standard process. please note that we are not using SAP EH&C and the client is asking this requirrement in the SAP R3 System. Is this possible to link this with material master? If so can u kindly explain me on this please.
    Thanking you in advance.
    Regards,
    Gopalakrishnan.S

    Hello
    If you do not use EH&S one option is to use a material class to mark the matrial as Rohs etc. relevant. As this is only a matter of storing infomation not futher process is linked to this data maintenance. If you wouldlike to use this stored data e.g. in SD, MM or PP processes you have to do it by your own programming. SAP EHS Management on the other hand gives you a number of options to use data like RoHs wich is store in EH&S further processes.
    In any case: srtong recommendatino would be: do not try to use a lot number of material classes to do the same lik you are doing in EH&S.
    Regarding regulatory demands EH&S is a "must" and wel integrated in SAP process (e.g. GTS, BW, SA Procudt and REACH Compliance Suite etc.)
    Using EH&S is not such a "big" problem and there aer many companies which can assist in using EH&S .
    With best regards
    C.B.
    Edited by: Christoph Bergemann on May 20, 2011 8:16 PM

  • "Conditions" button at the material master - Change the related condition

    There is "Conditions" button at the material master ("Sales: sales org. 1" tab). We can make condition record of PR00 by this button but at our system the condition for the material price is different (it isZPR0 at our system). How can I change the related condition type as ZPR0 for this button?
    Thanks in advance for the answers....

    Check program LMGMMF0Q and FUNCTION SD_COND_GET_DEFAULT_CONDITION for details.
    It looks it is hard coded, but they also mention that Via a user exit (business transaction event), the
    default KSCHL and KOTABNR can be set.
    Regards,

  • Problem related to Material Master?

    Hi All,
    I want that when ever any person creates a new material and on going on Views it shows the particular views which were fixed by us. Please Tell me how can I achive this.

    Hi,
    You can achieve this by way of authorization control. In T.code: PFCG, select your role for creating / changing the material master, Select option Maintenance statuses. Then at change status option select views that you want to give the authorization to the users. Create profile & save the role. Now assign the role to the users. They will get only those views you have selected for them. You have to select those views in all the roles related to material master (create, change, display).
    Regards,
    Biju K

  • Service Master and Material Master relation

    Hi Friends,
    Our client requirement is to procure and sale same services.
    and client wants to post the services to different G/L accounts for ex: if I am raising a sale order or Purchase order,
    then for each different service line item to be posted to different G/L accounts.
    Initially I thought of creating the service master with different valuation classes but when the same thing comes to sales then with service master they cannot create the sale order.
    Hence kindly advice in this case whether to go with the service master creation and create the PO's with the service masters
    or   go with the creation of material master with the services material type with different valuation classes?
    Thanks in Advance.
    regards,
    Sasi Kanth J

    Hi,
    For services the concerned entries have to be maintained in table T030.
    The system will then suggest the G/L accounts as per the valuation class                        
    maintained in table T030 (Standard Accounts Table, transaction OBYC).
    The system will determine the                    
    G/L account depending on the following criteria: 
    T001K-BWMOD                                                                             
    BKLAS                                                                             
    T001-KTOPL                                                                      
    T163K-KOMOK                                                                               
    Services level is one level below materials, which results in                 
    some inherent restrictions compared to materials. In case of                       
    services the values have to be maintained in the table T030.
    Regards,
    Edit

  • Query Related to Addition Of Customer Specific Tab in Material Master

    Hi Experts,
    we had a requirement from our client to add certain specific fields in Material Master. we added all those fields in a "User Tab" created by copying "Basic Data Tab" & it's attributes in SPRO. After this was done the transaction was running fine but when we want to migrate to another tab say "Basic Data  Tab" we are not able to do so as we are still on the same User Tab.
    Please help me on this <removed by moderator>.
    <removed by moderator>
    Thanks & Regards
    Priyesh Shah
    Edited by: Thomas Zloch on Jun 29, 2011 11:06 PM - urgency reduced, please do not offer ...

    Thanks for your reply.
          I would like to know am using strategy 52 for this FG, so that i can have option to procure order specific components after sales order arrival, and components which are not specific to the order can be procured before sales order arrival. Where am confused is if am planning with FG1 i.e. am entering PIR for FG1 and am procuring order independent  components before sales order arrival and suppose if the sales order arrives for FG2 for which components i have procured before sales order arrival is same but the remaining components which are order specific are different from that of FG1, then how the MRP shall behave. How the requirement for the FG2 shall be met. Kindly throw some light on this scenario.
    Expecting a positive and prompt response.
    Regards,
    J K Tharwani

Maybe you are looking for