Related to po table
in which table i can get purchase order net value at header levet
Your two previous post were rejected. Now you're trying for the third time. I will have to suggest your ID for deletion if you try the same question again.
Please respect the forum rules of engagement, don't post basic questions, search before posting, use more meaningful subject lines.
To all who replied, please do not answer such questions.
Thread locked.
Thomas
Similar Messages
-
Query related to Internal Table
Hi ,
I have a small query related to internal table , can we dump millions of records to an internal .
The actual requirment is like i need to develop a report in BI side where i have to dump records into an internal table from PSA tables without filtering .
Can we do so ....
or do we have any other option to dump the data to an internal tables .
need some tips on the same .
Thanks ,
VInay.Hello Vinay,
I believe the following extract will give you a brief idea on the size limitations for an internal table.......
Internal tables are dynamic data objects, since they can contain any number of lines of a particular type. The only restriction on the number of lines an internal table may contain are the limits of your system installation. <u><i>The maximum memory that can be occupied by an internal table (including its internal administration) is 2 gigabytes. A more realistic figure is up to 500 megabytes. An additional restriction for hashed tables is that they may not contain more than 2 million entries.</i></u>
Hope it proved useful
Reward if helpful
Regards
Byju -
Relation between MSEG table and movement types in 2lis_03_bf
Hi all,
May i know the relation between MSEG table and 2lis_03 _bf xtractor stock type/stockcategory where we see the informarion in r/3 side for this, you answers gets rewarded.
regards,
Dan.Hi,
Most of the data for IM comes from the tables MSEG andd MKPF. You can go to MSEG contents and see the data there. You will find all the movement types, stock types and stock categories there. You can also use the transactions MB5B, MB51 etc.. to see the related info in R/3. As I said most of the data comes from these tables but not all the data. It uses some internal programming to get the data.
Hope it helps... -
Tables related to cluster tables..
Dear all,
i know the concept of cluster tables, how data is stored in cluster tables and related to small tables.
i want to know what are all the tables to related to a cluster table.
Say for BSEG is a cluster table, and BSIK, BSAK and other tables are related to BSEG.
how can we know what other tables are related to BSEG?
Thanks in advance.BSIK and BSAK are index tables for BSEG, but are transparent tables and not part of the cluster.
To see what other tables are part of the cluster:
Go to SE11 and press the "delivery and maintenance" tab. You will see that cluster is RFBLG. double click on it. It will display RFBLG.
Take the menu path
Utilities -> where used list
then select tables.
You'll see the tables in the cluster.
Rob -
What is the Relation between System Tables and FND Table?
Hi,
I have two LOV's. First one is Module Name. Here I will select Module Name as GL, AP, AR.... In the second LOV it should populate all the API's available in the module. I tried with the following tablesFND_APPLICATION AND ALL_SOURCES. But there is no relation between these tables.
Can anyone suggest me..
Please help me out.
Thanks in Advance,
SateeshHi,
I have two LOV's. First one is Module Name. Here I will select Module Name as GL, AP, AR.... In the second LOV it should populate all the API's available in the module. I tried with the following tablesFND_APPLICATION AND ALL_SOURCES. But there is no relation between these tables.
Can anyone suggest me..
Please help me out.
Thanks in Advance,
Sateesh -
Relations Between MLCD table and material movements type
Dear all,
I Have a question about relations between MLCD table and Material movements. For Example We have a movement type Z71 when we did a movevent with tis movement type from MB1C Transaction. System creates a record in Mlcd Table. in this table Category field is VN and PCat field is V. How system decides about VN and V
is there any table which contains these conversions or is there any custimization in MM or CO modules ?
Could you please help me if you have any information about subject.
Best RegardsHi Anupam
Thanks for your speedy reply.sorry i forget to mention i need FG materials details for given plant,production version,metrial type.In
MKAL i am not able to give material type as input parameter
Regards
Bala -
Design an uix page which is not related an database table
Hi;
I want to design a uix page, but this page elements is not related an database table, only pass through the parameter to run a report, how can i do this easly
ThanksSuch functionality is not generated/supported by JHeadstart. But you can build this page manually using JDeveloper. Please use the JDeveloper online help and/or the JDeveloper forum for help if you get stuck.
In monitoring this forum we have to set priorities, and we simply lack the resources to help you with questions not related to JHeadstart. I hope you understand this.
Steven Davelaar,
JHeadstart Team. -
hi guys this is anuj kumar sharma just wanted to know that one thing related to sql table actually when i installed sap 4.7ee every thing is ok after installation server start prpperly
all wp are in wait condition and status is yes but when go to logon through sap front end it shows an error
that is abap run time error:-
error:- DBIF_RSQL_TABLE_UNKNOWN occured p1[psql/ft
what should i do to remove that and face that plz help me out.thanks for reply but me want to know that:-
actually when i installed sap 4.7ee every thing is ok after installation server start prpperly. means that every steps is ok process list msz server wp table all are at correct position but problem is that when i go to log on through front end it shown abap run time error
error:- DBIF_RSQL_TABLE_UNKNOWN occured p1[psql/ft
all wp are in wait condition and status is yes
what do want to know .......tell me
i think it is a lience error it may or may noy can you suggest me......?????????
what should i do to remove that and face that plz help me out. -
How to check relation between two tables in same database
How to check relation between two tables in same database using Oracle SQL developer. Version 2.1.1.64
Hi,
Try this,
SELECT cons.owner AS child_owner, cons.table_name AS child_table,
cons.constraint_name constaint_name,
cons.constraint_type constraint_type, col.owner parent_owner,
col.table_name parent_table, col.column_name column_name
FROM dba_cons_columns col, dba_constraints cons
WHERE cons.r_owner = col.owner
AND cons.r_constraint_name = col.constraint_name
AND col.owner = 'MY_USER'
ORDER BY child_table;Thanks,
Shankar -
Positioning a layer relative to a table
Hi,
I've created a site based on a table that is centered in the
browser window.
I want to add a small layer to accommodate a dropdown menu -
which should be positioned just under one of the navbar buttons.
I know I need to somehow position the layer relative to the
table - but I'm really bad at code. Can anyone help?
(The navbar is actually a seperate file called 1nav.php that
is 'included' in the main file called 'template.php'. - in case
that makes a difference.)
You can see the site so far at:
www.mywebspinners.com/SR/template.php
Or just the navbar file at:
www.mywebspinners.com/SR/1nav.php
Thanks,
- GregThis illustrates nicely some of the 'one-way' problems that
one can get into
by using only Design view (i.e., things that can happen that
you CANNOT get
yourself out of), and why it's always important to acquire
some familiarity
with HTML and CSS to work at all productively with
Dreamweaver (or any HTML
authoring system, for that matter).
Osgood beat me to the punch on his recommedation, and I think
it may be the
cause - but I'm waiting to see the results before posting
further.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Osgood" <[email protected]> wrote in
message
news:[email protected]...
> GregInFrance wrote:
>> Hi - sorry - I have no idea where all these things
ought to go. I just
>> use the 'Design' view in Dreamweaver -i never
actually write code. Is
>> the code you included in your last post how mine
should look - as I can't
>> see a difference. Sorry to be such a pain.
>
>
> You need to go into code view. Find all of the code
below, select it, cut
> it then paste it directly before the closing
</head> tag. If your relying
> on design view then give up now because its not going to
happen.
>
> <style type="text/css">
> <!--
> #Dropdown {
> position:absolute;
> left:306px;
> top:115px;
> width:231px;
> height:91px;
> z-index:1;
> visibility: hidden;
> }
> -->
> </style>
>
> <script type="text/javascript">
> <!--
> function MM_reloadPage(init) { //reloads the window if
Nav4 resized
> if (init==true) with (navigator) {if
>
((appName=="Netscape")&&(parseInt(appVersion)==4)) {
> document.MM_pgW=innerWidth; document.MM_pgH=innerHeight;
> onresize=MM_reloadPage; }}
> else if (innerWidth!=document.MM_pgW ||
innerHeight!=document.MM_pgH)
> location.reload();
> }
> MM_reloadPage(true);
>
> function MM_findObj(n, d) { //v4.01
> var p,i,x; if(!d) d=document;
>
if((p=n.indexOf("?"))>0&&parent.frames.length) {
> d=parent.frames[n.substring(p+1)].document;
n=n.substring(0,p);}
> if(!(x=d[n])&&d.all) x=d.all[n]; for
(i=0;!x&&i<d.forms.length;i++)
> x=d.forms
[n];
>
for(i=0;!x&&d.layers&&i<d.layers.length;i++)
> x=MM_findObj(n,d.layers.document);
> if(!x && d.getElementById)
x=d.getElementById(n); return x;
> }
>
> function MM_showHideLayers() { //v6.0
> var i,p,v,obj,args=MM_showHideLayers.arguments;
> for (i=0; i<(args.length-2); i+=3) if
((obj=MM_findObj(args
))!=null)
> { v=args[i+2];
> if (obj.style) { obj=obj.style;
> v=(v=='show')?'visible':(v=='hide')?'hidden':v; }
> obj.visibility=v; }
> }
> //-->
> </script>
> <link href="rs-styles.css" rel="stylesheet"
type="text/css" />
> -
Make relation between 2 table programilly
how can I make a relation between 2 tables ( one to many) through code
and also broke this relation through codeYou just need these commands:
https://msdn.microsoft.com/en-US/library/zkyz3407%28v=vs.80%29.aspx
https://msdn.microsoft.com/en-US/library/sdwsys0z(v=vs.80).aspx
Bye, Olaf.
Olaf Doschke - TMN Systemberatung GmbH http://www.tmn-systemberatung.de -
"Failed to open the connection" problem related to multiple tables in the report?
Post Author: Gadow
CA Forum: Data Connectivity and SQL
System specifics:
Web environment using ASP.Net 2.0 (from Visual Studio 2005 Professional)
Crystal Reports 2008, v. 12.0.0.549, Full
We have set up the following method for displaying reports via our website:
User is sent to a report-specific page. The user is given some filtering options specific to the report that will be viewed. When the user has specified the data filters, the user clicks a button.
The page wraps up the report parameters -- selection query, formula values, report location, the name to be displayed, etc. -- into a class which gets put into the Session object.
The page redirects to DisplayReport.aspx. ALL reports redirect to this page.
DisplayReport.aspx retrieves the report parameters from Session. A ReportDocument object is created and loaded, then set with the data from the parameters class.
A ConnectionInfo object is created and set with the relevant log on credentials. All of the reports draw from the same database, so the connection information is hard-coded as the same for all reports. The page then iterates through all of the tables in the Database.Tables collection of the ReportDocument and calls ApplyLogOnInfo to each table using the ConnectionInfo object.
The page is rendered and the user gets the filtered report.
We currently have seven reports. Five reports work fine and display the correctly filtered data with no error messages. Two reports generate a Failed to open the connection error and do not display. I have verified that the queries being sent to DisplayReport.aspx are valid, and as I said the connection information itself is hard-coded in the one page that displays the reports and this is identical to all reports.
The five reports that do work all have a single data table, either an actual database table or a single view. The two reports that do not work all have multiple tables. As far as I can tell, this is the only difference between the sets; all seven reports are based on the same DSN and I have verified the database on all of the reports. All of the reports were written using Crystal Reports 8, and all of the reports display fine in a Windows app I wrote some years ago using Crystal Reports 8. Again, the only difference between those reports that do work and those that do not is the number of tables used in the report: one table or view in the reports that display, more than one table (tables only, none use views) in the reports that do not display.
As for the code I am using, below are the relevant methods. The function MakeConnectionInfo simply parses out the components of a standard SQL connection string into a ConnectionInfo object. DisplayedReport is the ID of the CrystalReportViewer on the page.Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs)
Dim o As Object = Session("ReportParams")
Dim ReportURL As String = ""
'Verify that there is a ReportParameters object
If o Is Nothing OrElse o.GetType IsNot GetType(ReportParameters) Then 'Redirect to the error page
Response.Redirect("/errors/MissingReport.aspx")
End If
ReportParams = CType(o, ReportParameters)
'Verify that the report exists
ReportURL = "/Reports/ReportFiles/" + ReportParams.ReportName
ReportPath = Server.MapPath(ReportURL)
If Not File.Exists(ReportPath) Then
Response.Redirect("/errors/MissingReport.aspx?Report=" + ReportParams.ReportTitle)
End If
InitializeReport()
End Sub
Protected Sub InitializeReport()
Dim RD As New ReportDocument
Dim CI As ConnectionInfo = MakeConnectionInfo(DB_Bonus)
Dim RPF As CrystalDecisions.Shared.ParameterField = Nothing
RD.Load(ReportPath)
If ReportParams.SelectString <> "" Then
Dim Adapt As New SqlDataAdapter(ReportParams.SelectString, DB_Bonus)
Dim DS As New Data.DataSet
Adapt.Fill(DS)
RD.SetDataSource(DS.Tables(0))
End If
For Each kvp As KeyValuePair(Of String, String) In ReportParams.Formulas
Dim FFD As FormulaFieldDefinition = Nothing
Try
FFD = RD.DataDefinition.FormulaFields(kvp.Key)
Catch ex As Exception
'Do nothing
End Try
If FFD IsNot Nothing Then
Select Case FFD.ValueType
Case FieldValueType.DateField, FieldValueType.DateTimeField
If IsDate(kvp.Value) Then
FFD.Text = String.Format("Date()", Convert.ToDateTime(kvp.Value).ToString("yyyy, MM, dd"))
Else
FFD.Text = "Date(1960, 01, 01)"
End If
Case FieldValueType.StringField
FFD.Text = String.Format("""""", kvp.Value)
Case Else
'For now, treat these as if they were strings. If things blow up here,
'we will need to add the appropriate formatting for the field type.
FFD.Text = String.Format("""""", kvp.Value)
End Select
End If
Next
For Each T As CrystalDecisions.CrystalReports.Engine.Table In RD.Database.Tables
Dim TLI As TableLogOnInfo = T.LogOnInfo
TLI.ConnectionInfo = CI
T.ApplyLogOnInfo(TLI)
Next
DisplayedReport.ReportSource = RD
End Sub
Does this approach not work with reports containing multiple tables, or is there something I'm missing? Any meaningful suggestions would be much appreciated.Dear Dixit,
Please refer to the Crystal report landing page to get the details
information about the support for crystal report issues.
Please use the following thread to post your questions related to
crystal report.
SAP Business One and Crystal Reports
Regards,
Rakesh Pati
SAP Business One Forum Team. -
What are the tcodes related to CATSDB table
what are the tcodes related to CATSDB table
Hi,
look at this:
CAT2 Time Sheet: Maintain Times
CAT2_ISCR CATS: Maintain Times (Init. Screen)
CAT3 Time Sheet: Display Times
CAT3_ISCR CATS: Display Times (Initial Screen)
CAT4 CATS: Approve Data
CAT5 Data Transfer CATS -> PS
CAT6 Transfer External -> Time Management
CAT7 CATS: Transfer Data to CO
CAT8 Time Sheet: Document Display
CAT9 Data Transfer CATS -> PM/CS
CATA Transfer to Target Components
CATC Time Sheet: Time Leveling
CATM Selection From Time Recording
CATR Reorganize Interface Tables
CATSARCH Archiving Time Sheet Data
CATSWF CATS Workflow
CATSXC Customizing: CATS for Service Prov.
CATSXC_CHECK Check Customizing
CATSXC_COMP_DTL CATSXT: Maintain Component Details
CATSXT CATS for Service Providers
CATSXT_ADMIN CATS for Service Providers (Admin.)
CATSXT_DA Display Work Time and Tasks
CATSXT_DTL Work Times: Detail Display
CATS_APPR Approve Working Times (Poweruser)
CATS_APPR_LITE Approve Working Times
CATS_DA Display Working Times
CATS_SELVIEW Maintain Selection View HRCATS
CATW Record Working Time
Regards, Dieter -
Should I relate a fact table to a fact table to a dimension table?
Hi All,
I'm designing a dimensional data mart for a client and I'm now forced to think about many-to-many relationships, among other complexities I haven't dealt with until now. Said client needs to be able to analyze contracts, subcontracts, bids, and bidders.
Each contract and subcontract can have multiple bids. Each bidder can only submit a single bid for any single contract or subcontract. And each bidder can submit a bid for any number of contracts and subcontracts.
My initial plan is this: FactContracts, with FactContractKey, ContractID, SubContractID; FactBids, with FactBidKey, FactContractKey, and BidderKey; finally, DimBidders, with BidderKey.
I've left out degenerate dimensions and original business keys only to keep this message short. Please let me know if more info is required, I really need a qualified designer or architect to advise me but I don't know anybody else that's accessible.
Thanks,
Eric B.Thanks, SQLBIGuyMN, you answered our question. It makes sense, too, because bids are only analyzed if they've been accepted and contracted, and they would only be related to the bidder through the contracts fact. I think we've also determined that contracts
needs to be an Accumulating Snapshot Table.
Thanks again,
Eric B. -
Creating relation in child tables
Hi
I have two child tables to the master table tblClients as per image below at the end; tblClientUniforms.ClientID<-Client.ID->tblClientRates.ClientID.
Now I want to restrict tblClientUniforms.Role values for a client to only those values that are in tblClientRates.Role for the same client. What sort of relation do I need between tblClientUniforms.Role and tblClientRates.Role and how do I create
it? When I try to drag one role field on the other in SQL Server Diagram I get an 'The columns in table 'tblClientUniforms' do not match an existing primary key or UNIQUE constraint' error.
Thanks
RegardsHi
Just to clarify, all three tables contain a column named Role, now you want that Role value will unique for all three tables? Do you have client id in all tables? You can create an unique constraint on ClientID,RoledID...
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence
Role in only the two child tables, not in tblClients. Unique would be ClientID+Role in both child tables. -
How to relate data of tables returned by FM for reading data from ST03N
Hello,
I am using the FM SWNC_COLLECTOR_GET_AGGREGATES to retrieve data displayed in T-Code ST03N into my report.
I am able to get the required data in different tables like Times, Memory, Usertcode, Userworkload, Hitlist_database.
However I am unable to undertand how to relate the data of these different tables, prepare another internal table with only the fields that are required for my report and then display those details.
Like, I want to loop through one of these internal tables, read data from other internal tables and consolidate my required data. But I am unable to understand based on what criteria I can read other internal tables inside a loop of any one of the above said internal tables.
I searched a lot and found many threads and blogs related to ST03N and learnt a lot about this T-code. But I could not find how to relate the data of all these tables.
Request you to please help.
Thanks and Best Regards,
EswarHi,
I see the common fields like TaskType, EntryId. But, I want to make sure that these are the fields that are enough to read the records or is there any other way that I can be sure that I am getting the correct record in my read statement. So my question is specific to the tables returned from the FM SWNC_COLLECTOR_GET_AGGREGATES and not a generic one.
Thank you for your help.
Best Regards,
Eswar.
Edited by: eswar praveen on Aug 20, 2010 12:19 PM
Maybe you are looking for
-
Okay, here's my deal, I skateboard. Alot. Obviously, there's alot of hard landing and stuff of the sort. I need a player that can stand up to this. Here's what I need and what I'd like, if anyone can recommend something that matches this exactly, I w
-
Need help with page navigation
I've got a database where records are retrieved and displayed in a repeating region. I've added page navigation to it because I'm getting enough records in the database that scrolling through them all on a single page is getting to be a very big pag
-
Nasty Buzzing Noise when using external charger
I've got a travel charger made by iWantit (iPod & Nano compatible) that I've always used to charge my nano when out and about. When I connected my Touch to it the screen showed a flashing charging icon in the top right and the Touch started buzzing e
-
How can I change the settings in Safari to list the open windows chronologically instead of alphabetically? I keep a lot of open windows e.g., 25 windows and many tabs on each) and like to work between a few at a time. The problem is that Safari re
-
Unplugged LaCie w/o ejecting, now it won't remount
Let me say right off that I know it's not good to unplug a FW drive w/o enjecting, however the Finder crashed on my computer and wasnt' able to eject it, rather I had to hold down the power button in order for it to turn off. So, now it won't mount..