Related to shipment & transportation Dates & Time.

Hi,
Could you please tell me where can I find following dates & time in customizing.
1) Transit time & transit date
2) Loading time & loading date
3) Pick/Pack time
4) Transportation Lead time
Also can you give one example of forward scheduling & backward scheduling.
Thanks

Hi..
when u r creating sales order first system will go with backward scheduling if it is not reach the dates then system will go for forward scheduling.
Backward Scheduling:
material available datepick/pack time loading time transit timetransportation lead time
for ex order dated is 1st req deliver date is 10th assume like this
for pick/pack time = 2
for loading time = 2
for transportation lead time = 2
for transit =5
in backward scheduling from 10th
522+2 = 11days it is taking that means it crossing the order date ate the time it will go for forward scheduling
from 1st on wards 222+5 it will confirm 11th..
this is happening when the material is available on 1st.
If the material is not available then it will find material available date suppose that is on 3rd the sysstem will calculate like this 225 = 9 ( forward scheduling ) it will not consider Transportation lead time i.e( Lorry arrangement time ) because we can do this arrange ment between 1st and 3rd. then sys confirm on 3rd + 9days i.e 12th.
Pick/pack time system will pick up from shipping point Transportation time ( Trans lead time+ Transit time ) is from Route. Transit time means travel duration time..
Delievry scheduling will be started only from the material availability date i.e., system will first determine the material avail date and then do scheduling. By default Standard SAP system does Backward Scheduling in case material availability falls beyond the required delivery date system will do forward schedluing
Delivery Scheduling consists of the following Basic activities:
We give deatils while creating order:
Order Creation Date
Required Delivery Date
Order date - Material availability date - Transportation Planning Date - Loading date - Goods Issue Date - Required Delivery Date
Time Between GI Date and required Delivery Date is called Transit Time
Time Between LoadingDate and GI Date is called Loading time
Time Between Material Availability Date and Loading Date consists of 2 components - Pick / PackTime and Transportation Planning Time
System has to calculate all this before it determines the confirmed delivery date
Regds
MM

Similar Messages

Question on date, time and time stamp related - high priority

Hi friends,
My requirement is to find the processing time (time taken) of a task done by an agent in wf. For that I use Start Date, Start Time, End Date and End Time ( from struc SWP_LOGTAB ). I have to display the time taken by an agent in the form WWd XXh YYm (or WWd XXh YYm ZZs) ex: 2d 10h 40m 20s.
Can any one suggest me the right FMs which take start and end date/time and give me the above format result?
This can be achieved manually with unnecessary Ifs and CASEs but its gonna be a performance issue. Please suggest me something SAP standard.
Thanks in advace for your help
Reddy

Hi,
I don't find any function module, but it does'nt really hard to code this using DIV and MOD instructions :
If you've got your time in seconds :
w_day = w_time DIV 86400.
w_mod = w_time MOD 86400.
w_hour = w_mod DIV 3600.
w_mod = w_mod MOD 3600.
It doesn't seem too bad in term of performance....
Mathieu

Question on date, time and time stamp related

Hi friends,
My requirement is to find the processing time (time taken) of a task done by an agent in wf. For that I use Start Date, Start Time, End Date and End Time ( from struc SWP_LOGTAB ). I have to display the time taken by an agent in the form WWd XXh YYm (or WWd XXh YYm ZZs) ex: 2d 10h 40m 20s.
Can any one suggest me the right FMs which take start and end date/time and give me the above format result?
This can be achieved manually with unnecessary Ifs and CASEs but its gonna be a performance issue. Please suggest me something SAP standard.
Thankful for your help
Reddy

Hi
I will refer you to use SWWIHEAD table to retrieve start date and End Date of a Task. You have to write aprogram for this. You can find out the task from the field TS94000083 from WI_RH_TASK.
Please provide points if useful
Thanks
Arghadip

SHIPMENT & TRANSPORTATION

Dear All,
Can anyone send some material describing the process flow of SHIPMENT & TRANSPORTATION. If u have configuration material, kindly send it to my mail ID....[email protected]
points assured
Regards
Chaitanya CK

Hi KC,
Hope you are doing fine.
Please find the below material which may help you.
1) Maintain transportation planning point through Menu as follows:
Enterprise Structure IMG transportation Maintain planning point. Logistic Execution Definition
Create your own like BP01 enter the general data¡¯s required
2) Defining modes of transport:
 Logistic Execution Define modes ofIMG RoutesBasic transportDefine routesTransportation Functions Transportation
Use the standard like:
Shipping type: 01
Description: Road
3) Define shipping types :
Logistic ExecutionIMG Define shipping typesBasic RouteTransportation FunctionsTransportation
Or through T-code: SM30
PT: 01
Description: Truck
Mdtr: 01
STPG: 0001
4) Define transportation connecting point :
RoutesBasic TransportationLogistic Execution Define transportationIMG Define connection pointsTransportation Functions routes
Copy the std point and make it FB01 as departure zone and FB02 as destination zone
5) Define routes and stages.
LogisticIMG Define Define routes Routes Basic Transportation Functions Transportation routes and stagesExecution
Use the standard route and copy it as FB0001 and enter the departure zone and destination as what we created.
6) Defining Transportation Zone:
Basic Transportation Logistic Execution IMG Define transportation Router determination Route Transportation Functions zones
Use the standard transportation zone depending on the route so as for the example use 0000000003 - Southern Region
7) Maintain country or transportation zone for shipping points
 Logistic Execution IMG  Route determination  Route Basic Transportation Functions Transportation Maintain country and transportation zone for shipping point
Shipping point be ASH1 and route as 0000000003 which is assigned to country India
8) Maintain route determination:
Logistic ExecutionIMG Route determination Route Basic Transportation Functions Transportation Maintain route determination
Country of departure: India
Departure Zone: 0000000003
Country of destination: India
Destination Zone: 0000000003
And enter the datas needed like shipping condition 01, etc.
Maintain Transportation relevance for shipping point, sales document type and delivery types.
9) Now create shipping types
IMG Define shipment Shipments  Transportation Logistic Execution types
Copy the standard 0001 and make it to AFIL
10) Define and assign traffic zones through T-Code: T_76 (or) thru menu as follows
LogisticIMG DefineBasic functions tariff Shipments cost  Transportation Execution and assign zones
Copy the standard and make it to FABTARIFF and assign our transportation planning point as ATP1, ATP2 assign tariff zone to every particular transportation planning point
11) Define and assign pricing procedures
Shipments Transportation  Logistic Execution IMG define and assign pricing Price control  Pricing cost procedures
Copy the standard shipping cost pricing procedure SDFC00 to FBSC01
12) Assign purchasing data:
 Logistic Execution IMG Assign purchasing data Settlement Shipments cost Transportation
13) Assign transportation planning point to shipping condition, purchase organization, purchasing group and to plants.
14) Define Automatic G/L account determination:
 Transportation Logistics Execution IMG Automatic G/L Account Determination SettlementShipment Costs
Or through T-code: OMWB
Use G/L account 614000 as used in standard
15) Automatic determination of CO assignments:
IMG Automatic Settlement  Shipment Costs Transportation Logistics Execution Determination of CO Assignments
Or T-code: OKB9
16) Maintain shipping point address.
 Logistics Execution  DefinitionEnterprise Structure Define, copy, delete, check shipping point
17) Creating G/L account centrally.
General LedgerFinancial AccountingAccounting  Master Records 
ProcessingIndividual Centrally
Or through T-Code: FS00
18) Enter the G/L account 614000 to the company code AFIL
19) Create transportation condition records:
Logistic Execution Prices Shipment cost  Transportation Master data create
Or thru T-code: TK11
Enter condition type FB00 that is freight condition type, which is used as standard in the shipping cost pricing procedure.
Enter the price and save it
Process:
1. The system determines the pricing procedure for the shipment cost item-using transportation planning point, service agent and shipment cost item category
2. Calculation Basis
3. Condition Record
4. Access sequence.
For the sales order, create a delivery using VL01N and pick the goods. Now create a shipment using VT01N and assign the delivery to the shipment document. Make sure to enter the carrier and other details before performing the transportation planning and execution. Save the shipment document and PGI for the delivery would be done automatically.
A shipment represents a physical goods movement between two or more locations.
For the system to create a shipment, shipping-relevant deliveries must exist.
You use Transportation Planning to group pending deliveries into shipments and then to perform the shipments.
The outbound delivery documents contain routes that the system calculates in route determination, and a transportation planning date for the delivery.
Dynamic transportation planning is responsible for grouping together outbound deliveries into shipments that have at least the same route, visit plan type and the same transportation planning date.
The following restrictions can be taken into account for a shipment in Dynamic Transportation Planning:
Weight
Volume
Variable capacity
Number of stops
Maximum duration
Loading units
Create Shipment Document
Use
After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
Single Logistic Execution TransportationTransportation Planning Create document Logistics
T.code: VT01n
Enter your transportation planning point and shipment type. Press enter.
Creating the shipment cost document
Use
After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
Logistic Transportation Shipment cost  CreateSingle document LogisticsExecution
T.code: VI01.
After creation of shipment cost doc. You settle the Shipment cost.
Go to VI02, enter shipment cost no.and press enter.
Then go to Overview -- Fright cost items, Select the line item and double click it.
Go as main menu: Item --> Acc. assignment, you enter G/L acc. and cost center to which the transportation cost will be posted.
On the Standard change, details Freight cost items screen, then check the check box Transfer, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the Transfer check box.
Press save button on the current screen.
Shipment cost settlement and documents:
Use
After the shipment cost settled in shipment cost document, it has the following affects:
It creates a service entry sheet that refers to the purchase order determined.
It posts acceptance of services performed.
It creates an accounting document for the accruals.
Further subsequent documents are created in FI.
Create Delivery:
T.code: Vl01n
Create TO:
T.code: LT03
Create Shipment Document
Use
After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
 Transportation Planning  Create Single document Logistics Logistic Execution Transportation
T.code: VT01n
Enter your transportation planning point and shipment type. Press enter.
Creating the shipment cost document
Use
After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
Single document Logistics Logistic Execution  Transportation Shipment cost Create
T.code: VI01.
After creation of shipment cost doc. You settle the Shipment cost.
Go to VI02, enter shipment cost no.and press enter.
Then go to Overview -- Fright cost items, Select the line item and double click it.
Go as main menu: Item --> Acc. assignment, you enter G/L acc. and cost center to which the transportation cost will be posted.
On the Standard change, details Freight cost items screen, then check the check box Transfer, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the Transfer check box.
Press save button on the current screen.
Shipment cost settlement and documents:
Use
After the shipment cost settled in shipment cost document, it has the following affects:
It creates a service entry sheet that refers to the purchase order determined.
It posts acceptance of services performed.
It creates an accounting document for the accruals.
Further subsequent documents are created in FI.
Generally process is-
1) VL01N
2) VT01
3) VL02N - PGI
4) VI01
5) ML81N Service Entry Sheet
6) MIRO Invoice Verification
Shipping docs (VT01) are created before PGI...
You cannot carry out transportation planning or creation of shipment after the goods issue has been executed. Once goods issue is done it means that the material has left your premises so there is no need for a transportation planning after it.
In case you need carry out the shipment documents at the end of the day you could just create the delivery documents during the day and at end of the day create the shipment documents and the goods issue
Regards,
Peeyoosh.

Date / Time System fields - inconsistent

This is a weird one...please bear with me
Before I begin...note that this is not a problem that is difficult to fix, I'm just interested in better understanding why the system fields are behaving the way they are.
We have 20 or so programs that use a function module to create a file header that includes a date/time stamp. The programs also place a trailer with a date/time stamp that should match the one in the header. However, the programmer used different system fields (after a GET TIME statement) to create the date/time stamp in the trailer. On occasion, the date/time stamp comes out different.
Here's the code (sry about all caps):
GET TIME.
CONCATENATE SY-DATUM SY-UZEIT INTO BATCHID.
CALL FUNCTION 'Z_YADAYADA'
 EXPORTING
 FILE_ID = P_FILEID
 REFRESH_TYPE = P_REFTYP
 START_PERIOD = START_PER
 END_PERIOD = END_PER
 IMPORTING
 STRING255 = OUTPUTSTRING
 EXCEPTIONS
 INVALID_REFRESH_TYPE = 1
 INVALID_BATCH_ID = 2.
...sy-subrc check...
TRANSFER OUTPUTSTRING TO P_FILE1. <--header output
CONCATENATE L_TRL BATCHID COUNT T_TOTAL SPACE
 INTO OUTPUTSTRING SEPARATED BY L_DEL.
CONDENSE OUTPUTSTRING NO-GAPS.
TRANSFER OUTPUTSTRING TO P_FILE1. <--trailer output
inside function module *****
CONCATENATE: SY-DATLO SY-TIMLO INTO DATESTAMP,
 SY-SYSID SY-MANDT INTO MACHINE_NAME.
CONDENSE: DATESTAMP, MACHINE_NAME NO-GAPS.
CONCATENATE C_HDR DATESTAMP FILE_ID MACHINE_NAME
 SY-CPROG ' ' REFRESH_TYPE START_PERIOD
 END_PERIOD DATESTAMP
 INTO STRING255 SEPARATED BY '~'.
CONDENSE: STRING255 NO-GAPS.
You can see that the function uses SY-DATLO and SY-TIMLO for creation of the header, while SY-DATUM and SY-UZEIT are used for the trailer. What's wierd is that sometimes the trailer has a date/time stamp that is 1 second greater than the header, despite the fact that it is stored in the BATCHID variable before the header is created.
Any help, references, explanations greatly appreciated (and rewarded with points)
BMV

Hi Brian
Here is the related part from the weblog of ABAP expert Horst Keller. Hope it may help. For the full document, you can visit <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.wcm.compound.docs/library/uuid/f1391fc3-0301-0010-d384-fccd036f1c67">here</a>.
The values of all system fields in this table are implicitly set when the program is started, every time a screen layout of a screen is sent, and when the internal mode is set. The GET TIME command explicitly updates the system fields, except for sy-dayst, sy-fdayw and sy-tzone.
With the exception of sy-datlo and sy-timlo, all system fields refer to the local date and time of the current SAP system. The ABAP runtime environment clock is synchronized with the database server clock at regular intervals in order to calculate the local time of the SAP system. During the synchronization process, the ABAP runtime environment clock is set to the database server clock. Because this happens on all application servers in an SAP system, the ABAP runtime environment clock is synchronous with the clocks on all other application servers and with the database system clock, and thus shows the local time of the entire SAP system. The time zone on which the local time of an SAP system is based is the only entry in the database table TTZCU.
The content of sy-zonlo is taken from the user master record of the current user. The values of sy-datlo and sy-timlo are calculated from sy-datum and sy-uzeit and from the time zone of the SAP system for the time zone in sy-zonlo. If the user master record does not contain a time zone, or if it contains an invalid or an inactive time zone, sy-datlo and sy-timlo are set to the values of sy-datum and sy-uzeit. All valid time zones are defined in table TTZZ.
Is't the naming of sy-datum and sy-uzeit really geeky?
Time Stamps
The above system fields for date and time are not sufficient for many requirements of determining unique points in time: They represent local times and the values are measured in seconds. For more exact date and time determination, you use time stamps.
A time stamp represents date and time in the form YYYYMMDDHHMMSS. YYYY is the year, MM the month, DD the day, HH the hour, MM the minutes and SS the seconds. There is a short form and a long form. In the long form, the format specified above additionally contains 7 decimal places for fractions of seconds, which allows for an accuracy of up to 100 ns. The maximum time resolution depends on the operating system of the application server and may be less.
A valid time stamp must contain values whose date and time specifications before the decimal separator correspond to valid values for the data types d and t. Time stamps in this form are always considered as UTC (Universal Time Coordinated, basis for calculating worldwide time specifications; the UTC reference time is based on Greenwich Mean Time, GMT, but is not a time zone; it has no daylight saving time or summer time) time stamps when processed with the corresponding statements. You use the statement GET TIME STAMP to create a time stamp that represents the current UTC reference time.
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

Get date-time from .lvm

With Labview I've created a .lvm file with 6 colums of data. The .lvm also contains a x value (+1 for each row) so i'm saving 1 row of data every second.
If I plot the data in Diadem the X-axis shows up as relative time, but I want to see the absolute time (date+time). All the information is to do this is present in the header of the .lvm, but I cant find the setting to do this!
Thank in advance!

Hi Inspectation,
OK, I got your *.LVM file, and all is clear. The problem in this case is that DIAdem 2010 and prior versions are hiding the absolute date/time property of the waveform from you in an attempt not to confuse you. But since that's exacty what you want to see, this approach ends up being very confusing indeed, even though it works great for most of our customers.
The good news is that the LVM DataPlugin is parsing the absolute date/time property for each channel, and that property is being loaded (invisibly) into the Data Portal, so you can run a VBScript to fish out that information and create a new DateTime channel to plot the data against on the X axis:
OPTION EXPLICIT
Dim GroupIdx, ChanIdx
GroupIdx = GroupDefaultGet
IF GroupChnCount(GroupIdx) > 0 THEN
ChanIdx = CNoXGet(GroupIdx, 1)
Call WfmToDateWfm(ChanIdx, "DateTime")
Call ChnRenumber
END IF
Function WfmToDateWfm(Channel, DateTimeChanName)
Dim ChnStartTime, OffStartTime, ChnDeltaTime, RelStartTime, RelStopTime, DateTimeChannel
IF ChnPropValGet(Channel, "waveform") <> "Yes" THEN Exit Function
ChnStartTime = CDbl(CDate(ChnPropValGet(Channel, "wf_start_time")))
OffStartTime = ChnPropValGet(Channel, "wf_start_offset")
ChnDeltaTime = ChnPropValGet(Channel, "wf_increment")
RelStartTime = 24*3600*(Trunc(ChnStartTime) + 693958 + Abs(Frac(ChnStartTime))) + OffStartTime
RelStopTime = RelStartTime + ChnDeltaTime*(ChnLength(Channel) - 1)
IF DateTimeChanName = "" THEN DateTimeChanName = ChnName(Channel) & " DateTime"
Call GroupDefaultSet(ChnGroup(Channel))
DateTimeChannel = ChnLinGen("/" & DateTimeChanName, RelStartTime, RelStopTime, ChnLength(Channel))
ChnFormat(DateTimeChannel) = "Time"
Call ChnMove(DateTimeChannel, ChnGroup(Channel), ChnIndex(Channel))
WfmToDateWfm = DateTimeChannel
End Function ' WfmToDateWfm()
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

The export file from a calc script - naming and date/time stamp

Here is a simple calc script to export data.
2 questions:
1. Is there an easy way to add a date/time stamp on the name of the data file so that it does not overwrite the older ones every time?
2. I tried to specify the path so that it write to another server. "\\mfldappp011\E:\Exp_AW.txt". It's not working. How should I specify the path ?
Fix (@Relative("Yeartotal",0),"Actual","Working",&ActualYear);
Dataexport "file" "," "C:\Exp_AW.txt" "#MI";
EndFix;
Edited by: user9959627 on Sep 7, 2012 11:25 AM

Probably easiest to call the maxl script from a command line script, then rename the exported file to include the tme stamp and copy/move it to a location.
Cheers
John
http://john-goodwin.blogspot.com/

How do I update Date Time Digitized to match an updated Capture Time for a DNG file?

I am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'. Maybe this is a problem for DNG files only.

GreSep wrote: I saw another LR discussion that said that with LR 4.3 updating Capture Time would also update Date Time Digitized but it does not do so for me on my DNGs (and as of last month ALL my images were converted to DNGs).
One or two intermediate versions of LR 3 (perhaps Lr 3.6) set DateTimeDigitized when you gave the Metadata > Edit Capture Time command. But for people managing scans in which the capture time of the original image was different than the scan time, this behavior overwrote their scan times, so Adobe backed out of that change. Before and since those versions, the Metadata > Edit Capture Time command just changes the EXIF:DateTimeOriginal and related fields in XMP and IPTC.

How to get replied date & time of an email

I am using MS outlook 2010 from this month (August 2014), So i work on so many emails from different persons and I want to see time taken to on each email from the time I recieved it till the time I replied. Once I get a column with replied time details;
I can export it to excel so as to report to my manager about my TaT (turn around time), I am new to this forum and this is my first post, please help thanks. (I have browsed here for the same but couldn't get what I need)

Hi,
Several suggestions to find the replied date & time:
1. We can find related emails in Outlook, then find the replied date & time from the related emails:
Right click on the message in the list, Select "Find Related" -> "Messages in This Conversation" from the menu that comes up.
2. View tab -> Conversations -> check "Show as conversations", then we can easily find other emails in the conversation, then find the replied date & time.
Anyway, both methods above are manual and based on your request description, I don't think the whole process can be performed with the build-in feature automatically. However, the whole process may be realized via VBA, if you can accept a VBA method, I suggest
you post the detailed request in Outlook for Developers forum:
http://social.msdn.microsoft.com/Forums/office/en-US/home?forum=outlookdev
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Integration with Outlook - how to increment end date and time from start date/time

Hi,
I want to add a variable amount of time to an appointment start date and time in outlook, through vba in access. Code below shows what I've done:
======================================
Dim olApp As New Outlook.Application
Dim olAppointment As AppointmentItem
Dim myRequiredAttendee As Outlook.Recipient
Set olAppointment = olApp.CreateItem(olAppointmentItem)
With olAppointment
.Start = DateValue(strStartDate) + TimeValue(strStartTime)
.Duration = intDuration
.End = DateValue(strStartDate) + ????????
=======================================
What do I replace the ????? with so that it increments the start time by any duration I decide in minutes? Using the duration doesn't seem to work and I also want to be able to have the appointment span a number of days, e.g. could start at 930am on
Monday and end at 10am on Weds, but want to set the end time relative to the start time.
Thanks,
Chris.
_________________________________________________________ Every day is a school day!

I've tried that, but it throws out a datatype mismatch error :(
It would be helpful if you posted the exact code you tried. In my tests, setting teh .Duration property appears to work. However, if you want to set the .End property to a specific number of minutes after the date/time of the .Start property,
this works for me:
With olAppointment
.start = DateValue(strStartDate) + TimeValue(strStartTime)
.End = .start + TimeSerial(0, intDuration, 0)
End With
Assuming, that is, that intDuration contains the number of minutes the appointment should last.
Dirk Goldgar, MS Access MVP
Access tips: www.datagnostics.com/tips.html

2nd Gen iTouch Date/Time Randomly reseting?

Using 2.2 firmware with 32GB iTouch the system date and time get set to some random new date time from past.
1) So far the random date-time has always been in the past.
2) Somehow related to iTouch being connected to PC.
3) Might be related to Sync [but not always].
4) Might be related to Vista going into sleep mode while iTouch is connected.
Any fixes or work-arounds?

I have the exact same problem and I have narrowed it down to the corruption occurring after my PC goes into sleep mode. I get the same failure on my two machines. One is a desktop running Vista and the other is a Thinkpad running Windows XP. I also discovered that I did not have a problem using my laptop to charge my ITouch until I loaded it with ITunes. I deliberately put it into sleep mode before loading ITunes and it worked fine when it came out of sleep mode. I then loaded it with ITunes today to see what would happen and sure enough the clock and time got reset to a random date and time once it came out of sleep mode. I have had this problem with the 2.1 and the 2.2 level of code on the ITouch with my Vista machine and it was only today that I tried my experiment with my laptop machine. I hope that Apple can come up with a fix soon, as this problem is very annoying, since I cannot leave my Itouch connected for any length of time without the clock going bonkers.

Sorting photos by date/time taken, when date/time created is not an option?

I'm so sorry if this has been answered elsewhere, but I can't find it on Google or in the forums...
I need to sort wedding photos from multiple photographers by date taken so I can sort through the wedding as a full event. Sorting by the date/time the file was created will not suffice because I had to convert all photos from one of my photogs from NEF to DNG (D610 files not compatible with CS5), so the 'date created' for those DNG file is days later than all the other images. Thus, sorting by "date created' batches all the photos from one of my photogs together at the end.
Is there any option in Bridge that will actually read the metadata and sort by the shoot time of the image?
Thanks for any help!

There has been a known bug in PSE9 although only affecting raw images and caused by the Camera Raw 6.4 update. The timestamp gets changed by one hour each time an image is modified. I don’t know if your issue is related but the work around is to revert to ACR 6.3
http://kb2.adobe.com/cps/915/cpsid_91582.html
The only other work around is to temporarily switch to folder location view, if your images were imported from a single folder. Click on the display button (near top right in Organizer) to change the browser view. If you click on the folder in the left hand pane the files will normally be in sequential file name order which usually mirrors the date/time taken. From the folder location it’s possible to create an instant album, which can then be used as the basis of a slideshow.

How to get the local date time value

Hi,
I am Australian time zone. I have been using the below code to retrieve meeting start date time from my Sharepoint Calendar.
Console.WriteLine((DateTime)oListItem["EndDate"]);
This used to return the correct local date up until today. I simply read this and store in a database. Today when I check I can see that the date returned is different to what I can see in the Sharepoint calendar.
For and example: In Sharepoint calendar I can see the date as "Oct 1 2014 5:30 PM". But my above code now returns "Oct 1 2014 6:30 AM". This looks to me like UTC time.
But up until today my code above returned the correct local date. Is there any reason for this sudden chahge?
When I read the TimeZone in sharepoint (using RegionalSettings.TimeZone method) it return the correct time zone too.
Any help would be appreciated. I am concerned that I have to now go and change all places where I read the date time from sharepoint.
Thanks, Bimal
Bimal

Hi,
According to your post, my understanding is that you had some issue about the calendar time.
As your code worked well before, the issue may be related to the calendar itself or the site.
As the TimeZone is correct, you can recreate a new calendar to check whether it works.
Or create a new site to check whether it works.
I had made a simple demo to retrieve the calendar EndDate time, you can also check with it.
using (SPSite site = new SPSite("http://YourSiteURL "))
using (SPWeb web = site.OpenWeb())
SPList spList = web.Lists.TryGetList("Calendar1");
if (spList != null)
SPQuery qry = new SPQuery();
qry.ViewFields = @"<FieldRef Name='EventDate' /><FieldRef Name='EndDate' />";
SPListItemCollection listItems = spList.GetItems(qry);
foreach (SPListItem item in listItems)
string startTime = item["EventDate"].ToString();
string endTime = item["EndDate"].ToString();
Console.WriteLine("Start Time:"+startTime);
Console.WriteLine("End Time:"+endTime);
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Looking for generic WebService for update date & time in my C# WinForm program

hi
looking for generic WebService for update date & time in my C# WinForm program
thanks

hi
looking for generic WebService for update date & time in my C# WinForm program
thanks
Hello,
I agree with Cor that since this forum is for issues related to winodws form controls and features, but this issue is mainly related to the webservice which is working for updating time, you could consider posting this issue on other site, or you could
also consider creating your webservice by checking this document
Your first C# Web Service.
If you get any issues when create your webservice, you could post this issue in the following forum.
http://forums.asp.net/28.aspx/1?WCF+ASMX+and+other+Web+Services
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Related to shipment & transportation Dates & Time.

Similar Messages

Maybe you are looking for