Related to the questions

hi there
There are some transaction codes in SAP which will give you the details regarding the question & answers for the particular modules loke mm , pp , qm

hi
try SQADB01
regards
thyagarajan

Similar Messages

Questions/conditions/needs related to the PBX

Dear Cisco,
I act on behalf of my boss who is planning a larger IT investment, but needs some background information.
So far, we used an open-source free PBX, but after we've recognised its deficiencies, we decided to buy a commercial product.
To tell the truth, we hesitate between some products, and we need some confirmations related to the concerned PBXs. One of them is Cisco.
So our questions/conditions/needs are as follows:
The PBX needs to be an IP PBX.
Basic PBX features that we need: conferencing, video calling, voicemail, call queuing, IVR.
The type of all the desktop phone we use is Grandstream GXP 2000. The PBX should be compatible with this device.
We have a special corporate VoIP SIP phone ("softphone") developed by Ozeki's third party SDK. I am confident that we will continue to use this SDK, so the PBX should be compatible with this software.
And the last one: we would like to use Android smartphones as the part of our telephone system, so the PBX should support mobile extensions.
Please indicate if there is a solution that fulfills the above requirements. If so, please suggest me the proper product/service here or send me an e-mail to [email protected]
I wanted to post this message here intentionally, because any further personal comments/experiences coming from the community would be appreciated.
Best regards,
Donna E. Hill
[email protected]

hi
try SQADB01
regards
thyagarajan

Question related to the Federated Portal Network.

Hi All,
I have a question related to the Federated Portal Network.
I have to configured FPN between two portals :
1. BI-portal (Producer Portal) (EP 7.0)
2. Portal for other systems (Consumer Portal) (EP 7.0)
Can anybody help regarding this, I need material or URLs ...
Thanks & Regards,
Jay

Hi Jay,
Check out following links for fedrated portals
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/703cfbbd-e85e-2a10-00a3-ecd502c08e82&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70191d1e-2bd1-2a10-d9b7-ba19500da527&overridelayout=true
Regards,
Vaishali

Question related to the JAX-RPC.

Hi ,
I have a question related to the JAX-RPC API.
Please clear me following points whether I am right or not?
1. If my two end points are in Java then and only we use the JAX-RPC API. Is it right?
2. If my two end points are in .Net then we use the some other API in .NET. Is it right?
Please give me links or associate info. regarding this.
Thanks,
Rahul

With JAX-RPC API, you are writing or consuming web services. If you are building web services, then that web service should be interoperable to .NET as well as Java. You do not have to use JAX-RPC, because, JAX-WS can serve the same purpose but is much easier to program. More about web services may be found at [http://soalib.com|http://soalib.com]

Questions related to the localstorage=false client restarted and join back

Hi, We are using the coherence 3.4.2 version. I notified a strange problem in our application, related to the coherence. I am posting here seeking for help. We are using JDK 1.6.0_16 on Linux 64 OS.
To simplify the problems, let me just say that we have 3 JVM running as now. One is we called the data server, starting with following JVM settings:
java -Xms1G -Xmx1G -server -Dlog4j.configuration=log4j.xml
-Dtangosol.coherence.cacheconfig=/xxx/coherence_config.xml
-Dtangosol.coherence.ttl=0
-Dtangosol.coherence.log=log4j
-Dtangosol.coherence.clusterport=5511
-Dtangosol.coherence.distributed.localstorage=true The other 2 JVMs will use the same JVM settings as above, except -Dtangosol.coherence.distributed.localstorage=false.
When I started the all servers in this order: data server -> one client jvm -> the other client jvm, I can see they all join into one cluster, and our application works fine.
Now, if I shutdown client1 and client2, and restarted them, the problems comes:
1) From the coherence log, I can see the client1 and client2 joined back in the cluster.
2) But when client1 is trying to get cache using the following api:
NamedCache cache = CacheFactory.getCache("cacheName");
Object o = (Object)cache.get(id);The cache object is there, but without any elements in it. So Object o will always to Null. But I know in this case, there is one element in the case, which I just put in before restarted client 1 and 2.
So in this case, I can get a cache object back, but without any element into it. This is not the case before the JVM restarted.
3) In the above case, the cache is defined as a replicated cache as following:
          <cache-mapping>
               <cache-name>cacheName</cache-name>
               <scheme-name>ReplicatedScheme</scheme-name>
          </cache-mapping>
          <replicated-scheme>
               <scheme-name>ReplicatedScheme</scheme-name>
               <backing-map-scheme>
                    <local-scheme>
                         <scheme-ref>unlimited-backing-map</scheme-ref>
                    </local-scheme>
               </backing-map-scheme>
          </replicated-scheme>
          
          <local-scheme>
               <scheme-name>unlimited-backing-map</scheme-name>
          </local-scheme>4) I tried to use the SimpleCacheExplorer example coming with the coherence to see if I can reproduce this case. But I can not. I use the same coherence.xml as our application. I used the same cache name in the SimpleCacheExplorer as in our application. I started 3 JVMs, one with localstorage=true, the other 2 with localstorage=false. Everytime, I restarted the other 2 JVMs, it can join back the cluster and get the value for the original key. So I am not sure which part in our application breaks this.
5) I list the coherence log below from our application. I added 2-3 lines comments just to list what happened then.
Any idea or hints about why this is happenning? Thanks for your help.

Here is the log:
############ start the data server
2009-11-19 14:55:07,389 Coherence Logger@1398577124 3.4.2/411 INFO   2009-11-19 14:55:07.132/65.613 Oracle Coherence 3.4.2/411 <Info> (thread=http-8080-1, member=n/a): Loaded operational configuration from resource "jar:file:/datacloud/trunk/install/apache-tomcat-6.0.18/webapps/datacloud/WEB-INF/lib/coherence.jar!/tangosol-coherence.xml"
2009-11-19 14:55:07,389 Coherence Logger@1398577124 3.4.2/411 INFO   2009-11-19 14:55:07.187/65.668 Oracle Coherence 3.4.2/411 <Info> (thread=http-8080-1, member=n/a): Loaded operational overrides from resource "jar:file:/datacloud/trunk/install/apache-tomcat-6.0.18/webapps/datacloud/WEB-INF/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
2009-11-19 14:55:07,389 Coherence Logger@1398577124 3.4.2/411 DEBUG 2009-11-19 14:55:07.187/65.668 Oracle Coherence 3.4.2/411 <D5> (thread=http-8080-1, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
2009-11-19 14:55:07,389 Coherence Logger@1398577124 3.4.2/411 DEBUG 2009-11-19 14:55:07.190/65.671 Oracle Coherence 3.4.2/411 <D5> (thread=http-8080-1, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
2009-11-19 14:55:07,389 Coherence Logger@1398577124 3.4.2/411 DEBUG
Oracle Coherence Version 3.4.2/411
Grid Edition: Development mode
Copyright (c) 2000-2009 Oracle. All rights reserved.
2009-11-19 14:55:08,356 Coherence Logger@9218328 3.4.2/411 DEBUG 2009-11-19 14:55:08.351/863.022 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-19 14:55:08.15, Address=10.241.59.246:8089, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:30265, Role=ApacheCatalinaStartupBootstrap) joined Cluster with senior member 1
2009-11-19 14:55:08,360 Coherence Logger@9230760 3.4.2/411 INFO   2009-11-19 14:55:08.360/66.841 Oracle Coherence GE 3.4.2/411 <Info> (thread=Cluster, member=n/a): This Member(Id=2, Timestamp=2009-11-19 14:55:08.15, Address=10.241.59.246:8089, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:30265, Role=ApacheCatalinaStartupBootstrap, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1) joined cluster "cluster:0xC3E1" with senior Member(Id=1, Timestamp=2009-11-19 14:40:47.04, Address=10.241.59.246:8088, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:29459, Role=NokiaDcServerDataServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1)
2009-11-19 14:55:08,386 Coherence Logger@9230760 3.4.2/411 DEBUG 2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service ExpiryService with senior member 1
2009-11-19 14:55:08,386 Coherence Logger@9230760 3.4.2/411 DEBUG 2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSearchService with senior member 1
2009-11-19 14:55:08,386 Coherence Logger@9230760 3.4.2/411 DEBUG 2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistributedCache with senior member 1
2009-11-19 14:55:08,386 Coherence Logger@9230760 3.4.2/411 DEBUG 2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallLRUService with senior member 1
2009-11-19 14:55:08,386 Coherence Logger@9230760 3.4.2/411 DEBUG 2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallLFUService with senior member 1
2009-11-19 14:55:08,386 Coherence Logger@9230760 3.4.2/411 DEBUG 2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallHYBRIDService with senior member 1
2009-11-19 14:55:08,386 Coherence Logger@9230760 3.4.2/411 DEBUG 2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumLRUService with senior member 1
2009-11-19 14:55:08,386 Coherence Logger@9230760 3.4.2/411 DEBUG 2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumLFUService with senior member 1
2009-11-19 14:55:08,386 Coherence Logger@9230760 3.4.2/411 DEBUG 2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumHYBRIDService with senior member 1
2009-11-19 14:55:08,386 Coherence Logger@9230760 3.4.2/411 DEBUG 2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeLRUService with senior member 1
2009-11-19 14:55:08,386 Coherence Logger@9230760 3.4.2/411 DEBUG 2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeLFUService with senior member 1
2009-11-19 14:55:08,387 Coherence Logger@9230760 3.4.2/411 DEBUG 2009-11-19 14:55:08.385/66.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeHYBRIDService with senior member 1
2009-11-19 14:55:08,682 Coherence Logger@9218328 3.4.2/411 DEBUG 2009-11-19 14:55:08.681/863.352 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=1): Member 2 joined Service DistributedCache with senior member 1
2009-11-19 14:55:08,686 Coherence Logger@9230760 3.4.2/411 DEBUG 2009-11-19 14:55:08.686/67.167 Oracle Coherence GE 3.4.2/411 <D5> (thread=DistributedCache, member=2): Service DistributedCache joined the cluster with senior service member 1
2009-11-19 14:55:08,690 Coherence Logger@9218328 3.4.2/411 DEBUG 2009-11-19 14:55:08.686/863.357 Oracle Coherence GE 3.4.2/411 <D5> (thread=DistributedCache, member=1): Service DistributedCache: sending ServiceConfigSync containing 258 entries to Member 2
2009-11-19 14:55:08,693 Coherence Logger@9230760 3.4.2/411 DEBUG 2009-11-19 14:55:08.693/67.174 Oracle Coherence GE 3.4.2/411 <D5> (thread=DistributedCache, member=2): Service DistributedCache: received ServiceConfigSync containing 258 entries
2009-11-19 14:55:09,593 Coherence Logger@9218328 3.4.2/411 DEBUG 2009-11-19 14:55:09.593/864.264 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/10.241.59.246,port=8089,localport=37475]}
2009-11-19 14:55:09,597 Coherence Logger@9230760 3.4.2/411 DEBUG 2009-11-19 14:55:09.596/68.077 Oracle Coherence GE 3.4.2/411 <D5> (thread=TcpRingListener, member=2): TcpRing: connecting to member 1 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/10.241.59.246,port=37475,localport=8089]}
2009-11-19 14:55:12,673 Coherence Logger@1144704103 3.4.2/411 INFO   2009-11-19 14:55:12.508/172.386 Oracle Coherence 3.4.2/411 <Info> (thread=pool-2-thread-1, member=n/a): Loaded operational configuration from resource "jar:file:/datacloud/trunk/install/lib/coherence.jar!/tangosol-coherence.xml"
2009-11-19 14:55:12,673 Coherence Logger@1144704103 3.4.2/411 INFO   2009-11-19 14:55:12.514/172.392 Oracle Coherence 3.4.2/411 <Info> (thread=pool-2-thread-1, member=n/a): Loaded operational overrides from resource "jar:file:/datacloud/trunk/install/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
2009-11-19 14:55:12,673 Coherence Logger@1144704103 3.4.2/411 DEBUG 2009-11-19 14:55:12.514/172.392 Oracle Coherence 3.4.2/411 <D5> (thread=pool-2-thread-1, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
2009-11-19 14:55:12,673 Coherence Logger@1144704103 3.4.2/411 DEBUG 2009-11-19 14:55:12.517/172.395 Oracle Coherence 3.4.2/411 <D5> (thread=pool-2-thread-1, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
2009-11-19 14:55:12,673 Coherence Logger@1144704103 3.4.2/411 DEBUG
Oracle Coherence Version 3.4.2/411
Grid Edition: Development mode
Copyright (c) 2000-2009 Oracle. All rights reserved.
2009-11-19 15:04:23,811 Coherence Logger@9249408 3.4.2/411 DEBUG 2009-11-19 15:04:23.811/62.250 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallLRUService with senior member 1
2009-11-19 15:04:23,811 Coherence Logger@9249408 3.4.2/411 DEBUG 2009-11-19 15:04:23.811/62.250 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallLFUService with senior member 1
2009-11-19 15:04:23,812 Coherence Logger@9249408 3.4.2/411 DEBUG 2009-11-19 15:04:23.811/62.250 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallHYBRIDService with senior member 1
2009-11-19 15:04:23,812 Coherence Logger@9249408 3.4.2/411 DEBUG 2009-11-19 15:04:23.812/62.251 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumLRUService with senior member 1
2009-11-19 15:04:23,812 Coherence Logger@9249408 3.4.2/411 DEBUG 2009-11-19 15:04:23.812/62.251 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumLFUService with senior member 1
2009-11-19 15:04:23,812 Coherence Logger@9249408 3.4.2/411 DEBUG 2009-11-19 15:04:23.812/62.251 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumHYBRIDService with senior member 1
2009-11-19 15:04:23,812 Coherence Logger@9249408 3.4.2/411 DEBUG 2009-11-19 15:04:23.812/62.251 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeLRUService with senior member 1
2009-11-19 15:04:23,812 Coherence Logger@9249408 3.4.2/411 DEBUG 2009-11-19 15:04:23.812/62.251 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeLFUService with senior member 1
2009-11-19 15:04:23,812 Coherence Logger@9249408 3.4.2/411 DEBUG 2009-11-19 15:04:23.812/62.251 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeHYBRIDService with senior member 1
2009-11-19 15:04:23,946 Coherence Logger@9218328 3.4.2/411 DEBUG 2009-11-19 15:04:23.946/1418.617 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=1): Member 2 joined Service DistributedCache with senior member 1
2009-11-19 15:04:23,953 Coherence Logger@9249408 3.4.2/411 DEBUG 2009-11-19 15:04:23.952/62.391 Oracle Coherence GE 3.4.2/411 <D5> (thread=DistributedCache, member=2): Service DistributedCache joined the cluster with senior service member 1
2009-11-19 15:04:23,955 Coherence Logger@9218328 3.4.2/411 DEBUG 2009-11-19 15:04:23.953/1418.624 Oracle Coherence GE 3.4.2/411 <D5> (thread=DistributedCache, member=1): Service DistributedCache: sending ServiceConfigSync containing 259 entries to Member 2
2009-11-19 15:04:23,959 Coherence Logger@9249408 3.4.2/411 DEBUG 2009-11-19 15:04:23.959/62.398 Oracle Coherence GE 3.4.2/411 <D5> (thread=DistributedCache, member=2): Service DistributedCache: received ServiceConfigSync containing 259 entries
2009-11-19 15:04:24,513 Coherence Logger@879081272 3.4.2/411 INFO   2009-11-19 15:04:24.351/181.083 Oracle Coherence 3.4.2/411 <Info> (thread=RMI TCP Connection(4)-127.0.0.2, member=n/a): Loaded operational configuration from resource "jar:file:/datacloud/trunk/install/lib/coherence.jar!/tangosol-coherence.xml"
2009-11-19 15:04:24,514 Coherence Logger@879081272 3.4.2/411 INFO   2009-11-19 15:04:24.355/181.087 Oracle Coherence 3.4.2/411 <Info> (thread=RMI TCP Connection(4)-127.0.0.2, member=n/a): Loaded operational overrides from resource "jar:file:/datacloud/trunk/install/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
2009-11-19 15:04:24,514 Coherence Logger@879081272 3.4.2/411 DEBUG 2009-11-19 15:04:24.355/181.087 Oracle Coherence 3.4.2/411 <D5> (thread=RMI TCP Connection(4)-127.0.0.2, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
2009-11-19 15:04:24,514 Coherence Logger@879081272 3.4.2/411 DEBUG 2009-11-19 15:04:24.358/181.090 Oracle Coherence 3.4.2/411 <D5> (thread=RMI TCP Connection(4)-127.0.0.2, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
2009-11-19 15:04:24,514 Coherence Logger@879081272 3.4.2/411 DEBUG
Oracle Coherence Version 3.4.2/411
Grid Edition: Development mode
Copyright (c) 2000-2009 Oracle. All rights reserved.
2009-11-19 15:04:24,546 Coherence Logger@879081272 3.4.2/411 INFO   2009-11-19 15:04:24.546/181.278 Oracle Coherence GE 3.4.2/411 <Info> (thread=RMI TCP Connection(4)-127.0.0.2, member=n/a): Loaded cache configuration from file "/datacloud/trunk/install/conf/coherence_config.xml"
2009-11-19 15:04:24,760 Coherence Logger@879081272 3.4.2/411 WARN   2009-11-19 15:04:24.760/181.492 Oracle Coherence GE 3.4.2/411 <Warning> (thread=RMI TCP Connection(4)-127.0.0.2, member=n/a): UnicastUdpSocket failed to set receive buffer size to 1428 packets (2096304 bytes); actual size is 89 packets (131071 bytes). Consult your OS documentation regarding increasing the maximum socket buffer size. Proceeding with the actual value may cause sub-optimal performance.
2009-11-19 15:04:24,786 Coherence Logger@9218328 3.4.2/411 DEBUG 2009-11-19 15:04:24.785/1419.456 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/10.241.59.246,port=8089,localport=48995]}
2009-11-19 15:04:24,787 Coherence Logger@9249408 3.4.2/411 DEBUG 2009-11-19 15:04:24.787/63.226 Oracle Coherence GE 3.4.2/411 <D5> (thread=TcpRingListener, member=2): TcpRing: connecting to member 1 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/10.241.59.246,port=48995,localport=8089]}
2009-11-19 15:04:24,882 Coherence Logger@879081272 3.4.2/411 DEBUG 2009-11-19 15:04:24.882/181.614 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a
2009-11-19 15:04:25,118 Coherence Logger@9218328 3.4.2/411 DEBUG 2009-11-19 15:04:25.112/1419.783 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=1): Member(Id=3, Timestamp=2009-11-19 15:04:24.917, Address=10.241.59.246:8090, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:30657, Role=NokiaDcServerBuildBuildServer) joined Cluster with senior member 1
2009-11-19 15:04:25,118 Coherence Logger@9249408 3.4.2/411 DEBUG 2009-11-19 15:04:25.115/63.554 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=2): Member(Id=3, Timestamp=2009-11-19 15:04:24.917, Address=10.241.59.246:8090, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:30657, Role=NokiaDcServerBuildBuildServer) joined Cluster with senior member 1
2009-11-19 15:04:25,120 Coherence Logger@9242415 3.4.2/411 INFO   2009-11-19 15:04:25.120/181.852 Oracle Coherence GE 3.4.2/411 <Info> (thread=Cluster, member=n/a): This Member(Id=3, Timestamp=2009-11-19 15:04:24.917, Address=10.241.59.246:8090, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:30657, Role=NokiaDcServerBuildBuildServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1) joined cluster "cluster:0xC3E1" with senior Member(Id=1, Timestamp=2009-11-19 14:40:47.04, Address=10.241.59.246:8088, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:29459, Role=NokiaDcServerDataServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1)
2009-11-19 15:04:25,127 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:25.127/181.859 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member(Id=2, Timestamp=2009-11-19 15:04:23.541, Address=10.241.59.246:8089, MachineId=49398, Location=site:americas.nokia.com,machine:daec-linuxvpn059246,process:30753, Role=ApacheCatalinaStartupBootstrap) joined Cluster with senior member 1
2009-11-19 15:04:25,131 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:25.131/181.863 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service ExpiryService with senior member 1
2009-11-19 15:04:25,131 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:25.131/181.863 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSearchService with senior member 1
2009-11-19 15:04:25,132 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:25.132/181.864 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistributedCache with senior member 1
2009-11-19 15:04:25,132 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:25.132/181.864 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallLRUService with senior member 1
2009-11-19 15:04:25,132 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:25.132/181.864 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallLFUService with senior member 1
2009-11-19 15:04:25,133 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:25.132/181.864 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistSmallHYBRIDService with senior member 1
2009-11-19 15:04:25,133 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:25.133/181.865 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumLRUService with senior member 1
2009-11-19 15:04:25,133 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:25.133/181.865 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumLFUService with senior member 1
2009-11-19 15:04:25,133 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:25.133/181.865 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistMediumHYBRIDService with senior member 1
2009-11-19 15:04:25,133 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:25.133/181.865 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeLRUService with senior member 1
2009-11-19 15:04:25,133 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:25.133/181.865 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeLFUService with senior member 1
2009-11-19 15:04:25,133 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:25.133/181.865 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistLargeHYBRIDService with senior member 1
2009-11-19 15:04:25,134 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:25.134/181.866 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Member 2 joined Service DistributedCache with senior member 1
2009-11-19 15:04:25,219 Coherence Logger@9218328 3.4.2/411 DEBUG 2009-11-19 15:04:25.219/1419.890 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=1): Member 3 joined Service ReplicatedCache with senior member 3
2009-11-19 15:04:25,220 Coherence Logger@9249408 3.4.2/411 DEBUG 2009-11-19 15:04:25.220/63.659 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=2): Member 3 joined Service ReplicatedCache with senior member 3
2009-11-19 15:04:25,223 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:25.223/181.955 Oracle Coherence GE 3.4.2/411 <D5> (thread=ReplicatedCache, member=3): Service ReplicatedCache joined the cluster with senior service member 3
2009-11-19 15:04:26,310 Coherence Logger@9242415 3.4.2/411 DEBUG 2009-11-19 15:04:26.309/183.041 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=3): TcpRing: connecting to member 1 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/10.241.59.246,port=8088,localport=58713]}
2009-11-19 15:04:26,312 Coherence Logger@9218328 3.4.2/411 DEBUG 2009-11-19 15:04:26.312/1420.983 Oracle Coherence GE 3.4.2/411 <D5> (thread=TcpRingListener, member=1): TcpRing: connecting to member 3 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/10.241.59.246,port=58713,localport=8088]}

I keep getting the little blue box with the question mark

Hi
I have 10.6.7 system software and my safari is 5.0.4
I have called apple twice with this problem already but nothing has helped except for short times.
I have reset safari about one dozen times and when I do I reset the top 7 items and I've emptied the cache in addition just in case. I've also taken my safari preference plist out of my library and trashed it.
And I've run disk utilities many times and restarted my computer. Each thing I do will solve the problem for a short time, even up to a day or more (or less) but then it comes back. For instance on Facebook maybe 1/8th of the thumbnail images have the little blue boxes with the question marks but most don't. I can't figure it out. Sometimes even the iPAD safari gets them too but my firefox doesn't show them and neither does Safari on my eMac.
Yesterday the question marks even showed up in ONE mailing on all 3 computers with the question marks in the blue boxes (meaning my iMac, my eMac and my iPad) but then it just all resolved after a few hours. This does sound like possibly a server problem except today it's happening (in Safari again) only on this iMac in Safari (not firefox) and not on the other two devices.
One more thing, since they changed my radio on the roof for my wireless internet, the 5.8 phone cuts out the internet when I use it. The problem has gotten worse since they changed the radio to the same frequency as the phone, it's a much faster service than the 2.4 radio. I don't know if this is related or not.
Thank you,
Martha

<Contact your ISP.
Is it possible, Carolyn, that this would mainly and almost always be only affecting the iMac and Safari in the iMac if it were a server issue? Right now Safari has more blue boxes with question marks than ever and the eMac and iPad have none. Firefox on the iMac has none also.
I should try a direct connection and by pass the router and see if that makes a difference.
I will contact them tomorrow but I want to get clear in my head first all the facts and possibilities.
Thanks!
Martha

Issue related to the Credit memo and S.O.

Hi,
I have one issue related to the Credit memo and S.O.
We have a network of Dealers and Dealer inventory is linked with our system. When user creates S.O for Dealer1.If the item is not avail in our inventory and it is avail in any other Dealer inventory (Dealer2), then the system creates S.O wrt the Dealer2.
In this case as the material is directly delivered from Dealer1 to Dealer2, there is no any GI in our system.
So, the transaction with Dealer1 will be the normal as usual. But, we have to return the goods amount to the Dealer2 with any suitable way. We are considering it as a Credit memo.
My question is, as we have created S.O wrt the partner function- Dealer1 and we are creating CR memo for Delaer2, is there any way through which we can link the se two transactions with customizing so that we need not to make any ABAP programming.
I mean can we create Cr memo wrt S.O when the partner functions are different?
Pl. guide me.
Thanks,
Roopan.

You have an interesting Scenario.
You can handle this scenario in multiple ways
1. Third party Scenario (Here Dealer 1 becomes Vendor &Dealer 2 remains Customer)
2. Order related sales & credit memo.
3. Intercompany sales, where you represent dealers place as a plant in your system. (Not an ideal way to handle the scenario, but possible option)
Regards,
Rajesh Banka
Reward points if helpful.

The question about the HA installation on ECC6.0

Hi Experts,
We are about to implement a project with HA environment on the ECC6.0 in the near future, which is just about the ABAP stack. After reading the Installating Guide, I stil have several questions related to the procedures of HA installation.
In the guide document, I got the following steps to process for realizing the HA of ECC6.0:
1. Run SAPinst to install the central services instance (ASCS) using the virtual host name on the primary cluster node, host A.
2. Prepare the standby node, host B, making sure that it meets the hardware and software requirements and it has all the necessary file systems, mount points, and (if required) Network File System (NFS), as described in Preparing for Switchover .
3. Set up the user environment on the standby node, host B. For more information, see Creating Operating System Users and Groups Manually. Make sure thatyou use the same user and group IDs as on the primary node. Create the home directories of users and copy all files from the home directory of the primary node.
4. Configure the switchover software and test that switchover functions correctly.
5. Install the database instance on the primary node, host A.
6. Install the central instance with SAPinst on the primary node, host A.
7.If required, install additional dialog instances with SAPinst to replicate the SAP system services that are not a SPOF. These nodes do not need to be part of the cluster.
My Question is that does standby node(host B in above context) need to install the ASCS, database instance and Central Instance?
If host B does not need to install the database instance, how about the whole system would be when the primary cluster node (Host A in above context) totally crash, such as power failure.

Hi Rong,
I would try to explain it in simple words...
My Question is that does standby node(host B in above context) need to install the ASCS,
database instance and Central Instance?
If host B does not need to install the database instance, how about the whole system would be when
the primary cluster node (Host A in above context) totally crash, such as power failure.
1. You don't need to install ASCS on Node B. You are installing it using a VIRTUAL HOSTNAME which represent cluster not individual node. VIRTUAL HOSTNAME is assigned to cluster package, so whichever Node is the owner of the package, will have the VIRTUAL HOSTNAME. (it will switch with cluster switchover)
2. It is actually a cluster package configuration magic. When Node A is active, cluster package owner is Node A. So all mount points (which is on SAN disk) is mounted on Node A. When you switchover the cluster, those packages will be mounted on Node B.
Some time single cluster package is used (which includes mount points for SAP instance + Database directories). You can also use 2 cluster package seperating SAP and Database directory structure.
Only OS related directories should be on servers local disk. All other application related mount points should be on SAN disk which is configured in "Cluster Package". (For example /sapmnt, /usr/sap, /oracle etc.)
You only need identical users and their enviornment settings on both Nodes.
In simple words, When primary node fails or crashed only users and thier enviornment setting will be lost. On second node, because of identical users and their profiles, same settings will be available to bring up the SAP system. Your all SAP and Database data is intact as it is on SAN Disk.
I hope, your confusion is cleared now...
Regards.
Rajesh Narkhede

Webpart won't show tasks related to the list item

Hi
I have a 'Complaints' task webpart that's displayed under a (list) display form. The tasks are created by a workflow, when a complaint is created. I can get all of the tasks to appear in the webpart, but I can't filter it - I'm wanting the tasks relating
to the specific complaint to appear in the webpart, but I can't seem to get this to work.
I've tried several ways:
creating a new calculated field to extract the ID from the hyperlink in the 'Link' column (*ID='12'). In the webpart I connected the complaint 'Id' to the new calculated field.
Created a new calculated field to extract the Title from the hyperlink in the 'Link' column (*ID=12, 'Complaint against B & M Builders'). In the webpart I connected the complaint 'Title' to the new calculated field.
*Can't display the whole hyperlink for privicy reasons.
Any ideas how I can get this webpart to work?
There's a similar question 'Webpart to show related tasks', but the solution involves using Designer - I was wondering if it can be done at the front end.
Thanks

So if you're creating a task via workflow, put the current item (complaint) ID into the Task in a column called RelatedComplaintID. Then on the page, connect the two web parts together and bind ID to RelatedComplaintID.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

The question about EDI in scenario 'Cross-Company Code Sales Processing'?

I'm doing the exercise with IDES system for the scenario 'Cross-Company Code Sales Processing'.
But when posting the EDI, it gave me the error as followings:
there are related data in table EDPP1, including customer and vendor data, but it still informed me the questions.
pls help!
Object 0090033869
Output type: tst IV for MM by ken
Processing log for program RSNASTED routine EDI_PROCESSING
EDI: Partner profile not available
EDI: Partner profile not available
    Message no. E0332
Diagnosis
    A partner profile could not be found with the following key:
    /0000000000/LI/
    This involves the key fields of the table EDPP1:
    -PARNUM partner number
    -PARTYP partner type
Procedure
    Please check the EDI partner profiles.
    Execute function

Hi
Partner profile is not seems to be maintained in tcode WE20.
Please maintain in WE20.
Kind Regards
sandeep

What is the pinout for the 6602 relative to the 'D' connector.

I am developing a custom board to connect with the PCI-6602 Counter/Timer card. I will use the SH68-68-D1 Shielded Cable, 68-pins, 2 m to connect from the 6602 to the custom board. What I need to know is what is the pinout relative to the 'D' connector. The manual shows the connector as a rectangle.
Thanks,
Tony

Hi Tony,
The routing from the PCI-6602 through the SH68-68-D1 is one-to-one, so I believe that all you should need is the pinout for the 6602. This is shown below.
This information can be found in Measurement & Automation Explorer (MAX) by right-clicking on the device and selecting "Device Pinouts".
I hope this is what you needed. Post back if you have further questions.
Ed W.
Applications Engineer
National Instruments
Message Edited by Ed W on 12-13-2006 04:14 PM
Message Edited by Ed W on 12-13-2006 04:14 PM

IDOC number related to the delivery

Hi All,
I have issue regarding finding out IDOC related to a delivery.
When the output is processed for a delivery, idoc gets created. Now this idoc number gets stored in the EDIDC table. In delivery one can get the related idoc number by checking the processing logs for the output type.
Is there any specific FM which can give me the idoc number of the latest processed output type for that delivery. I have delivery number and output type.
Thanking in advance.
Regards,
Shahu

Hi..
I think need to add further to my question.
I have an interface progra in which I am sending IDOC details related to the delivery.
Now in this interface program, I have delivery no and the processed output type. Using this how can get the IDOC no. I cannot go to EDIDC to get the idoc no as it will be performance intensive or to any transaction. I need to code here to somehow get the idoc number using this delivery and output type.
I am trying the following approach but could not implement it so far.
In delivery is I go to header>output>check the processed output type -->processing log --> the idoc number will be present in this log.
I am trying to code in the interface program to read this idoc number present in processing log.
Is there any way I can achive this.
regards,
Shahu
Regards,
Shahu

Is this forum related to the Sony Mobile company?

Hello all,
I would like to know if the team answering the questions here is related to thr company Sony Mobile?
I have spent nearly 8 months with 1 phone of my small company's 8 devices (all Sony Xperia phones or tablets)
I have written several emails to Sony and I am not willing to give up so Sony will get away with its horrible support.
Is there a way to contact / be contacted from a senior escalation specialist or do I have to continue sending emails and letters to Sony support via the "contact us" form without getting an answer?
Or perhaps other consumer forums would be a place to share the great experience of Sonyy support?
I'd love to get an answer from somebody from this site, if possible.
Thanx a lot
Michael

Hi !
I'm sorry to hear that you have such an experience with our customer support.
We are several official Sony members here on the support forum that represents the company.
Please let me or any of my colleagues know if there something we can do for you.
http://talk.sonymobile.com/t5/Welcome/Community-users/m-p/634967#U634967

After making a movie and wanting to burn a DVD, I go for iDVD in the 'DEEL' menu. Then I get the question ' where is iDVD? What is the problem?

After making a movie and wanting to burn a DVD, I go for iDVD in the 'DEEL' menu. After couple of seconds I get the question ' where is iDVD?
What is the problem? I cannot find iDVD in the programs map.
regards Tonl

The current Apple thinking is that the entire world has access to fast broadband and wants to distribute home movies to friends and relatives via download (iCloud) rather than mailing them a DVD. The fact that nothing could be further from the truth has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. That worked for some, but is now said to have been withdrawn by Apple. Also, you can complain bitterly here, perhaps suggesting that Apple could have provided a choice between using iCloud and burning DVDs:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that comes with OS 10.7 Lion (which also omitted iWeb) or will come with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD.

How do i find the place on this Mozzilla web site where the answer to the question that i submitted will be found?

Someone please tell me how to locate the place on this web site where the answer to my question can be found?

Your other thread is https://support.mozilla.org/en-US/questions/1014066
The users questions and answers search has been a bit broken since July 31 or even earlier. As a results the Questions and Posts count may not increase.
It may or may not work but another way is to go to https://support.mozilla.org/questions/ and click on My contributions at top.
The best you can do at moment is to use the email and to bookmark the threads you posted or replied in.
There are a few threads in relation to this issues in https://support.mozilla.org/en-US/forums/contributors

Related to the questions

Similar Messages

Maybe you are looking for