Related to upgrade 11.1.2.1 from 11.1.2 in distributed Environment

Hi Experts,
I am upgrading and have few queries related to it-
1) server 1 : Foundation (11.1.2)
2) server 2: web applications (11.1.2)
3) ...............
4) ...............
Should i replicate with similar moudels on existing environment?
I mean
1) server 1: Foundation (11.1.2.1)
2) server 2: web applications (11.1.2.1)
secondly could installation be in pieces as i did earlier (in fresh install; like installed foundation then EPMA, web applications one by one)
or it could be one shot to upgrade all components?
Regards
Kumar

Thank you very much John.
So it is the maintenance release you are applying, I am sure we keep round in circles with this upgrade.Yes, you are absolutely correct.
You install the same components on the same machines, then you apply the maintenance release on each machine, then you configure again.
You should really upgrade all the component at the same time.Yes, I am going to upgrade all modules in this upgrade. (no partial upgrade as recommended by Oracle PDF)
Sorry for more clarification-
FROM Johngoodwin Blog-
Installation on distributed env.
Installtool.cmd> next > “Apply maintenance release” >
Check that there is a tick in each of the products with “11.1.2.0.0” against them, if there is not then you have not downloaded and extracted all the required files.Not sure to select all component as installed in one go or one by one
Option 1: foundation first on server 1, server2, server3 etc...then other component like EPMA, clac manager, Essbase, & Planning?
Option 2: select all component on server 1(Foundation, EPMA, calc manager, EAS etc..) as you selected in your blog, then move server2 (Foundation, EPMA, calc manager, EAS etc..) and upgrade all related component on server2......then server 3(foundation & essbase) etc..
Once you click next a list of products to patched will be shown, click next again and the maintenance patching will start up, this is a good point to go and spend time doing >something that is actually meaningful in life and then on your return hope the status is all green. Regards
Kumar

Similar Messages

Documents related to upgrade from 4.6C TO ECC 6.0

Hi all,
can anyone send some documents related to upgrade from 4.6C TO ECC 6.0
my emil id is
[email protected]
THANKS
VENKI

Hi Venki,
Please check for the following links for the information on Upgradation from 4.6C to ECC6.0
Upgrade Procedure/Support Packages:
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
SAP Upgrade guide:
http://www.thespot4sap.com/upgrade_guide_v2.pdf#search=%22upGRADE%20STEPS%20-%20SAP%22
Upgrade information centre:
Upgrade Information Center [original link is broken]
For Functionality Differences pls refer to the below site - http://solutionbrowser.erp.sap.fmpmedia.com/
From ABAP's perspective, the link below helps you:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
For technical upgrade inputs, check:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/07/upgradeFROMR3TOmySAPERP-PARTII&
https://wiki.sdn.sap.com/wiki/display/profile/UPGRADEFROMR3TOmySAPERP-PARTIII
I am sending you a mail too.Please check it.
Reward if found useful.
Regards
Sayee

Hi, I have an iphone 3GS from HK. After upgrading to 4.3.3 from 4.3.2 as prompted by itunes on May 10, 2011 my entire contact in my iphone was wiped out! When I checked my backup file in Outlook Express it was also wiped out!!! What can I do now?

Hi, I have an iphone 3GS purchased in HK. After upgrading to 4.3.3 from 4.3.2 as prompted by itunes on May 10, 2011 my entire contact in my iphone was wiped out. When I checked my backed up file in Outlook Express, it was also wiped out during the synchronization. I tried to restore from backup on iTunes but still, the contact was not there anymore. I have contacted your HK Apple Hotline and talked to a technical support called TIMMY LO, he said there is nothing to do with them and he refused to provide any support to recover my contact, he even said I should try to pay extra money to 3rd party supplier and see what they can do to my iphone, despite the fact that this could be caused by the pre-mature release of 4.3.3 when a bug still hasn't been fixed. I am very disappointed at Apple's service, especially considering that I have been a loyal customer of iphone / ipod touch in the past few years. I need an official reply from Apple on this! How can Apple be so irresponsible to their own firmware failure??

Hi, I have an iphone 3GS purchased in HK. After upgrading to 4.3.3 from 4.3.2 as prompted by itunes on May 10, 2011 my entire contact in my iphone was wiped out. When I checked my backed up file in Outlook Express, it was also wiped out during the synchronization. I tried to restore from backup on iTunes but still, the contact was not there anymore. I have contacted your HK Apple Hotline and talked to a technical support called TIMMY LO, he said there is nothing to do with them and he refused to provide any support to recover my contact, he even said I should try to pay extra money to 3rd party supplier and see what they can do to my iphone, despite the fact that this could be caused by the pre-mature release of 4.3.3 when a bug still hasn't been fixed. I am very disappointed at Apple's service, especially considering that I have been a loyal customer of iphone / ipod touch in the past few years. I need an official reply from Apple on this! How can Apple be so irresponsible to their own firmware failure??

I am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

i am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

Install more RAM in the computer; the Mac needs to have at least 2GB of RAM and should have 4GB or more first.
(125734)

Cannot find backslash (\) on German keyboard anymore after upgrading to OS 10.6 from OS 10.5

Cannot find backslash (\) on German keyboard anymore after upgrading to OS 10.6 from OS 10.5. It used to be at Alt-ß. Anyone can help please ?

Never mind. Found it in an old post. It is mapped at Shift-Alt-7, really weird.
The post is at:
http://www.innoq.com/blog/st/2003/12/backslash_on_mac_os_x.html

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts..

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
Rp

1. in physical connections part can i use the same work schema
2. Can i use same contexts created or do i need to create everything as new and then try?
Thanks,
Rp.
Hi,
As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)

While opening most of the website i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before. Kindly help.

while opening most of the website on Safari i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before.
HTTP Status 404 - /ssssportal.war/fup_gpon_1m_6g_512k.jspp
type Status report
message /ssssportal.war/fup_gpon_1m_6g_512k.jspp
description The requested resource (/ssssportal.war/fup_gpon_1m_6g_512k.jspp) is not available.
Kindly help. Also I am getting spinning ball most of the time. This was not with OS X Maverick 10.9.

while opening most of the website on Safari i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before.
HTTP Status 404 - /ssssportal.war/fup_gpon_1m_6g_512k.jspp
type Status report
message /ssssportal.war/fup_gpon_1m_6g_512k.jspp
description The requested resource (/ssssportal.war/fup_gpon_1m_6g_512k.jspp) is not available.
Kindly help. Also I am getting spinning ball most of the time. This was not with OS X Maverick 10.9.

Upgrading to LR 3.2 from 2.6 - Should I use the LR 3 box?

As I intend to upgrade to Lightroom 3.2 from 2.6, I wonder if I should use the upgrade box or donload a trial version and insert the key to be found in that box.
There was a thread lelated to migration from LR 1.4 to 2.2 ( http://forums.adobe.com/message/1394503#1394503 ) that strongly suggested passing over 2.0
What is best?

As I intend to upgrade to Lightroom 3.2 from 2.6, I wonder if I should use the upgrade box or donload a trial version and insert the key to be found in that box.
It doesn't matter. The results are the same. Lightroom 3.2 is Lightroom 3.2 whether you download it or buy the box.
There was a thread lelated to migration from LR 1.4 to 2.2 ( http://forums.adobe.com/message/1394503#1394503 ) that strongly suggested passing over 2.0
What is best?
I agree ... skip 2.0, although this seems irrelevant to your title and first paragraph.

Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

To configure the browser to use Acrobat or Adobe Reader to open PDF files:
1. Quit Internet Explorer(any other browser)
2. Start Acrobat or Adobe Reader.
3. Choose Edit > Preferences.
4. Select Internet in the list on the left.
5. Deselect(Uncheck) Display PDF in Browser, and click OK.
6. Restart Internet Explorer

X220: Cant Upgrade to Windows 8.1 from Windows 8

Hi all,
I cant seem to upgrade to Windows 8.1 from Windows 8 on my X220.
Originally during the install it states "This application wasn't installed - view details".
Then it states "Something happened and Windows 8.1 couldn't be installed. Please try again. Error code 0xc0000005"
Then it states "Something happened and Windows 8.1 couldn't be installed. Please try again. Error code 0x80246007"'
Anyone have any suggestions?
Thanks
Rambler

Hi,
According to your description, Windows 8 Operating System installed on your computer, right?
Did you update to Windows 8.1 via Windows Store?
If yes, follow Cyber_Defend_Team's suggestion, check if your computer meet the prerequisite.
After that, try to install Windows 8.1 for test.
If the issue persists, according to this blog to troubleshoot:
Something happened and the install of Windows 8.1 can't be completed. (And now you're annoyed)
http://blogs.technet.com/b/ouc1too/archive/2013/10/23/something-happened-in-the-install-of-windows-8-1-can-t-be-completed-and-now-you-re-annoyed.aspx
Karen Hu
TechNet Community Support

Tried to upgrade to osx 10.9 from 10.7 and I didn't notice that it downloads in the launcher. I turned my mac off and ever since then it has glitched out and will not download no matter what I do. I have had it for 3 years which is out of warranty.

Tried to upgrade to osx 10.9 from 10.7 and I didn't notice that it downloads in the launcher. I turned my mac off and ever since then it has glitched out and will not download no matter what I do. I have had it for 3 years which is out of warranty. It now has a blank bar under the launch pad and no matter how many times I try re-downloading it or restarting my computer it does not work. I use too play starcraft and other games on this computer although new patched/updates have made it that I can no longer do that now. Really frustrating having to deal with this especially after buying this computer upfront and now out of warranty.

Go to your Applications folder and find a file called "Install OS X Mavericks". Send it to the trash and delete it. Then try the download again.

Process to Upgrade SAP HANA from SPS06 to SPS07 on distributed systems

Hi Experts,
We have a requirement to upgrade our SAP HANA system system from SPS06 to SPS07, but I have below queries on the same:
1) Do we need to consider any Notes before applying the upgrade for pre and post steps (as per my knowledge we have to consider post upgrade note: 1962472, are there any other too?)
2) As per my knowledge, we just need to stop SAP app systems and then backup of HANA system
3) Also we have a distributed environment in our landscape (three multiple hosts), what could be the upgrade approach, is it same as like single host environment (as /hana/shared will be the common to all distributed hosts)
Could anyone clarify my questions please.
Also for your information we have BW systems on top of HANA DB
Thanks very much in advance !
Kind Regards,
Arun Reddy
Message was edited by: Tom Flanagan

Hi John,
Thank you for the response, our source and target levels are (Source - 1.00.69.00.385196 Target - 1.00.74.03.392810)
I just wanted to ask you one more quick question here, can't we upgrade the above mentioned versions in one go? or we need to upgrade in two steps like, at first upgrading from 1.00.69.00.385196 to 1.00.73.00.389160 and then to target level 1.00.74.03.392810?
Also as you said in distributed environment we can upgrade as same like single host environment, so it same like below approach?
1) stopping the hana database
2) navigate to media path and then execute hdblcm in gui or command line
3) select option upgrading existing system
4) provide the passwords and system poped-up inputs
5) select the target levels of HANA components
6) once upgrade done successfully, then need to upgrade hana client in all app servers
if my above assumption is correct, then I have couple of questions like:
1) in which host we need to login and perform the upgrade? (as we are having three hosts- HANADB1, HANADB2, HANADB3) , is it okay we can do from any of the three hosts?
2) Also if upgrade stopped at middle due to errors, do we have option like to start the upgrade from the point where it stop? else we need to restore the lat successful backup and then again need to perform the upgrade from starting point?
Sorry for asking many questions, i have done the upgrade in single host environment, but not on distributed. So wanted to be make sure with all points to action the activity.
Thanks for your help and patience in advance !
Kind Regards,
Arun Reddy

I cannot afford to upgrade my computer and sw from xp. How do I open older files created in InDesign CS2

I cannot afford to upgrade my computer and sw from xp.
How do I open older files created in InDesign CS 2.
The error code it telling me the plug ins have been disabled.
Someone tell me this is a message about the newer version that has not been installed on my computer.
I

If you plan on collaborating with other users who have progressed with the technology you are gong to have to upgrade. There is simply no way any longer to continue with XP and CS2 except in isolation.

Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears

Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears. The error further displays "
type: Exception report
message:
description: The server encountered an internal error that prevented it from fulfilling this request.
exception:
ServletException Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
root cause:
NoClassDefFoundError Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
note: The full stack trace of the root cause is available in the logs.
Has anyone experience this issue? Any solutions? Your assistance is greatly appreciated!

Hi Mesut,
you can refer the link for migration
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/upgrade/guide/10xcucrugx/10xcucrug010.html
regds,
aman

Step-by-step guide to upgrading a MacBook Core Duo from 802.11g to 802.11n.

Hardmac.com has post a step-by-step guide on how to upgrading a MacBook Core Duo from 802.11g to 802.11n using an 802.11n card from the Mac Pro desktop. The upgrade was also tested and confirmed to work with the AirPort Extreme 802.11n at 802.11n speed.
There is no reason that a similar upgrade shouldn't also work with the MacBook Pro.
http://www.hardmac.com/articles/71/

Hardmac.com has post a step-by-step guide on how to
upgrading a MacBook Core Duo from 802.11g to 802.11n
using an 802.11n card from the Mac Pro desktop. The
upgrade was also tested and confirmed to work with
the AirPort Extreme 802.11n at 802.11n speed.
There is no reason that a similar upgrade shouldn't
also work with the MacBook Pro.
http://www.hardmac.com/articles/71/
Gino,
Interesting how the Apple 802.11n Enabler installed on the MacBook with no problems using the CD that comes with the AirPort Express.
I must try that.
Thanks for the post!
William

Related to upgrade 11.1.2.1 from 11.1.2 in distributed Environment

Similar Messages

Maybe you are looking for