Relation Between Interest and Risk Categories for Customers

Hi
Can somebody tell me if there is a relationship between interest rates and risk categories. We have not implemented neither treasury nor Hedging.
Would like to link the interest as per the risk categories. As the risk changes, interest should also vary.
Can this be achieved
Prasad

Hi Prasad,
It is all AR functionality: Dunning/Interest Calculation/Credit Management/Risk Categories; I think it is doable to adjust interest on late payments based on customer risk category; but I doubt you will get detailed answer on this forum. FICO forum may be better.
Manish

Similar Messages

Relation between BKPF and EKBE table for reversing document?

Is there any relation between BKPF and EKBE table for reversing document when STBLG is blank in BKPF.
AND
How to differentiate Old Accounting document / Reverse document / New document when in BKPF-STBLG is blank for all three document and BKPF-XBLNR are same for all.

Hi Varun,
Table Document no (BKPF-BELNR) is link between Material document no (EKBE-BELNR). If you are looking for validating Material reversal document then please use following logic for your requirement.
Material Document (MBLNR) & Material Document Year (MJAHR). Pass material document (MBLNR) to MSEG-SMBLN to read MSEG-MBLNR with MSEG-MJAHR to MSEG-SJAHR, if record found delete both the documents i.e. MSEG-SMBLN & MSEG-MBLNR (donu2019t consider these documents in the logic) and display Material Document No. (MSEG-MBLNR)
Regards,
Santosh

Relation between computing and gathering statistics

Hi gurus,
What is the relation between computing and gathering statistics for a database object.Are they mutually dependent or one doesn't have anything to do with the other?How they affect performance of a database??
plz dont redirect..just bottom lines are expected(be specific)
Thanks in advance
anirban

computing term used to collect 100% statistics along with analyze command.
gather stats is a new package provided by the oracle, also recommend to use this instead of analyze. You can also take 100% stats, like compute with analyze command, in gather stats pacakge, parameter estimate_percent=>null.
exec dbms_stats.gather_table_stats('SCHEMA',TABLE',cascade=>true,estimate_percent=>NULL);
Jaffar

Table relations between vbrk and bkpf for Accounting Document Number

hello,
i am using 4 tables to get data into my programs.
vbrk,vbrp konv and bkpf.
i want to get belnr from bkpf.i found relation between vbrk and belnr.but in vbrk table belnr's value is initial.
can anybody tell me that how should i relate vbrk and bkpf or how to get Accounting Document Number(belnr) from bkpf for Billing Document(vbeln).
regards,
soniya s.

hi,
chekc this. its working for me.
data : WA_AWKEY LIKE BKPF-AWKEY.
data : WA_BELNR LIKE BKPF-BELNR.
data : LENGTH TYPE I.
*BREAK MTABAP.
LENGTH = STRLEN( IT_VBRK-VBELN ).
if LENGTH = '10' .
MOVE it_vbrk-VBELN TO WA_AWKEY.
SELECT SINGLE BELNR FROM BKPF INTO WA_BELNR
WHERE AWKEY = WA_AWKEY
AND AWTYP = 'VBRK'
and blart = 'RV'.
it_final-acc_doc = WA_BELNR.
CLEAR WA_BELNR .
CLEAR WA_AWKEY .
else.
CONCATENATE '0' it_vbrk-vbeln INTO wa_awkey.
SELECT SINGLE BELNR FROM BKPF INTO WA_BELNR
WHERE AWKEY = WA_AWKEY
AND AWTYP = 'VBRK'
and blart = 'RV'.
it_final-acc_doc = WA_BELNR .
CLEAR WA_BELNR .
CLEAR WA_AWKEY.
endif.

Database table/FM to find relation between plant and company code in SRM

Hi,
I have a requirement where I need to determine the relation between the plant and company code in SRM.
The plant and company code both belong to R/3. We are replicating the plant by using the report BBP_LOCATIONS_GET_ALL.
This plant is now available as a BP in SRM. But from which SRM table or using which SRM FM can I get the relation between this and the company code?
Thanks,
Srivatsan

Hi
<b>Check table BBP_LOCMAP. (Plants) - Manage Table Business Partner > System > Location
BBP_COMPCODE_FAV User-Specific Favorites for Permitted Company code.</b>
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Relation between Rollup and compression.

Hi All,
Is there a relation between rollup and compression ? i.e if i compress the cube, will the rollup job be faster ?

Hi,
Thanks for all your replies. Now the picture is crystal clear.
1. A compression job moves data from F table to E table. This is also applicable for aggregates. If you schedule a compression job for a cube, the aggregates are automatically compressed( You can also compress aggregates of a cube without compressing the cube. There are programs avalibale for the same).
2. Assume that you have not done compression . If you load the data to base cube ,it takes more time to create the indexes after loading.
3) Assume that you have done compression . If you load the data to base cube ,it takes less time than 2 point to create the indexes after loading.
On similar lines, if aggregates of a cube are compressed before rollup, then rollup will be faster. This is what exactly I have experienced. I had a cube which had 1000 request. It was never compressed. The rollup job for the cube used to take around 60,000 seconds. I compressed 900 requests. Now the rollup job gets over in 2400 seconds.So the conclusion is the following:
<b>When aggregates of a cube are compressed, the rollup job runs faster.</b>
Message was edited by: Tej Trivedi

Is There any Relation Between PCD and SSO

Hi,
Is there any relation between PCD and SSO, why because if i am try to connect from portal to R/3 in the user mapping i got one error i.e some pcd error.
pls tell me how to rectify that.
Regards,
Jagadish Babu Kanikanti.

Hi Jagadish
The PCD is only a central persistance for storing Portal objects. There is no such relation between PCD and SSO that could create a problem. You can however check for the PCD error in this manner.
1. In the system administration role, choose System Administration -> Support. The Support Desk appears.
2. Select the area Portal Content Directory.
3. Click on PCD Configuration in the test and configuration tools. The next screen shows all the parameter values currently maintained for the PCD.
4. To reload the configuration, choose Reload.
Hope that helped.
Best Regards
Priya

Urgent :Relation between vendor and business area

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hi ,
Is there any table or transaction which will give an one-to-one relation between vendor and business area?
Thnks and Regards,
Anand

hi
in this situation u have to creat new Z table and Z transaction with link of this both . it will solve ur problem . better to take abaper help other wise u can use T-CODE se11 to creat table.
se93 for transaction code .

What are the Relations between Journalizing and IKM?

What is the best method to use in the following scenario:
I have about 20 source tables with large amount of data.
I need to create interfaces that join the source tables into target tables.
The source tables are inserted every few secondes with about hundreds to thousands rows.
There can be a gap of few seconds between the insert of different tables that sould be joined.
The source and target tables are on the same Oracle instance and schema.
I want to understand the role of: 'Journalizing CDC' and 'IKM - Incremental Update' and
how can i use it in my scenario?
In general What are the relations between 'Journalizing' and 'IKM'?
Should i use both of them? Or maybe it is better to deelte and insert to the target tables?
I want to understand what is the role of 'Journalizing CDC'?
Can 'IKM - Incremental Update' work without 'Journalizing'?
Does 'Journalizing' need to have PK on the tables?
What should i do if i can't put PK (there can be multiple identical rows)?
Thanks in advance Yael

Hi Yael,
I will try and answer as many of your points as I can in one post :-)
Journalizing is way of tracking only changed data in your source system, if your source tables had a date_modified you could always use this as a filter when scanning for changes rather than CDC, Log based CDC (Asynchronous in ODI, Logminer/Streams or Goldengate for example) removes the overhead of of placing a trigger on the source table to track changes but be aware that it doesnt fully remove the need to scan the source tables, in answer to you question about Primary keys, Oracle CDC with ODI will create an unconditional log group on the columns that you have defined in ODI as your PK, the PK columns are tracked by the database and presented in a Journal table (J$<source_table_name>) this Journal table is joined back to source table via a journalizing view (JV$<source_table_name>) to get the rest of the row (ie none PK columns) - So be aware that when ODI comes around to get all data in the Journalizing view (ie Inserts, Updates and Deletes) the source database performs a join back to the source table. You can negate this by specifying ALL source table columns in your PK in ODI - This forces all columns into the unconditional log group, the journal table etc. - You will need to tweak the JKM to then change the syntax sent to the database when starting the journal - I have done this in the past, using a flexfield in the datastore to toggle 'Full Column' / 'Primary Key Cols' to go into the JKM set up (there are a few Ebusiness suite tables with no primary key so we had to do this) - The only problem with this approach is that with no PK , you need to make sure you only get the 'last' update and in the right order to apply to your target tables, without so , you might process the update before the insert for example, and be out of sync.
So JKM's provide a mechanism for 'Change data only' to be provided to ODI, if you want to handle deletes in your source table CDC is usefull (otherwise you dont capture the delete with a normal LKM / IKM set up)
IKM Incremental update can be used with or without JKM's, its for integrating data into your target table, typically it will do a NOT EXISTS or a Minus when loading the integration table (I$<target_table_name>) to ensure you only get 'Changed' rows on the load into the target.
user604062 wrote:
I want to understand the role of: 'Journalizing CDC' and 'IKM - Incremental Update' and
how can i use it in my scenario?Hopefully I have explained it above, its the type of thing you really need to play around with, and throroughly review the operator logs to see what is actually going on (I think this is a very good guide to setting it up : http://soainfrastructure.blogspot.ie/2009/02/setting-up-oracle-data-integrator-odi.html)
In general What are the relations between 'Journalizing' and 'IKM'?JKM simply presents (only) changed data to ODI, it removes the need for you to decide 'how' to get the updates and removes the need for costly scans on the source table (full source to target table comparisons, scanning for updates based on last update date etc)
Should i use both of them? Or maybe it is better to deelte and insert to the target tables?Delete and insert into target is fine , but ask yourself how do you identify which rows to process, inserts and updates are generally OK , to spot a delete you need to compare the table in full, target table minus source table = deleted rows , do you want to copy the whole source table every time to perform this ? Are they in the same database ?
I want to understand what is the role of 'Journalizing CDC'?Its the ODI mechanism for configuring, starting, stopping the change data capture process in the source systems , there are different KM's for seperate technologies and a few to choose for Oracle (Triggers (Synchronous), Streams / Logminer (Asynchronous), Goldengate etc)
Can 'IKM - Incremental Update' work without 'Journalizing'?Yes of course, Without CDC your process would look something like :
Source target ----< LKM >---- Collection table (C$) ----<IKM>---- Integration table (I$) -----< IKM >---- Target table
With CDC your process looks like :
Source Journal (J$ table with JV$ view) ----< LKM >---- Collection table (C$) ----<IKM>---- Integration table (I$) -----< IKM >---- Target table
as you can see its the same process after the source table (there is an option in the interface to enable the J$ source , the IKM step changes with CDC as you can use 'Synchronise Journal Deletes'
Does 'Journalizing' need to have PK on the tables?Yes - at least a logical PK in the datastore, see my reply at the top for reasons why (Log Groups, joining back the J$ table to the source table etc)
What should i do if i can't put PK (there can be multiple identical rows)? Either talk to the source system people about adding one, or be prepared to change the JKM (and maybe LKM, IKM's) , you can try putting all columns in the PK in ODI. Ask yourself this , if you have 10 identical rows in your source and target tables, and one row gets updated - how can you identify which row in the target table to update ?
>
Thanks in advance YaelA lot to take in, as I advised I would reccomend you get a little test area set up and also read the Oracle database documentation on CDC as it covers a lot of the theory that ODI is simply implementing.
Hope this helps!
Alastair

What is the relation between KTOPL and 0CHRT_ACCTS_ATTR? both Chart of Acct

Hi
If an R3 field e.g. KTOPL (in datasource 0fi_gl_4) which is a "Chart of Accout" is extracted a part of 0fi_gl_4 to BI,
is there the need to separately extract 0CHRT_ACCTS_ATTR & 0CHRT_ACCTS_TEXT which are also "Chart of Accout"
What is the relation between KTOPL and 0CHRT_ACCTS_ATTR & 0CHRT_ACCTS_TEXT in R3?
What is the relation between KTOPL and 0CHRT_ACCTS_ATTR & 0CHRT_ACCTS_TEXT in BI?
Thx

Hi,
I get these well with examples so let me see if I get your point:
So in the tranx data the 0fg_gl will be a value for KTOPL e.g. 450009 as a G/L Account number? (Values for chart of Acct should be GL Accounts, right?)
but before this tranx data is loaded, preferrably, 0CHRT_ACCTS_ATTR and 0CHRT_ACCTS_TEXT should have been extracted to BI; and data loaded; and this will be the master data and there should have been in it:
.._ATTR -
.._TEXT
450009 -
Petty cash Expenses
Is my understanding exact?
Thnx

What is the relation between bw and netweaver

Hi all
what is the relation between bw and netweaver? any one give answer for this

Hi
SAP NetWeaver
The SAP NetWeaver technology platform is the open integration and
application platform that reduces total cost of ownership (TCO) across the
entire IT landscape.
SAP NetWeaver integrates and aligns people, information, and business
processes across technologies and organizations
And BW is a part of Composite Application framework for Information Integration
This framework also contains Other Components such
o     Enterprise Portals (EP)
o     Exchange Infrastructure (XI)
o     Master data management (MDM)
o     Solution manager
o     Web Application server (WAS)
o     xApps
Hope this solves ur question.as if any further doubts
Sonal...

What is the relation between UTXJ and JMOD, how JMOD determine in order

Hi All,
What is the relation between UTXJ and JMOD!
How JMOD determine in order! ( For TAXINJ).
Please help me
Regards
raj

Dear Raj
Both are not related in anyway. UTXJ is for sales tax and JMOD is for excise condition. For UTXJ, you need to create a tax code in FTXP and assign it in VK11 / UTXJ, whereas, JMOD is an excise condition type for which, you need to maintain the relevant datas in J1ID.
Coming to your question, how JMOD is determined in sale order, it is based on delivering plant. This delivering plant, as already said above, you will have to maintain in J1ID with the indicator "1" under declared tab in Material Chapter ID combination.
thanks
G. Lakshmipathi

What are the relation between JPA and Hibernate, JPA and TopLink?

What are the relation between JPA and Hibernate, JPA and TopLink?
Can JPA instead of Hibernate and TopLink?

The Java Persistence API (JPA) is the object relational mapping persistence
standard for Java. Hibernate and TopLink provide an Open source Object-relational mapping framework for Java.
They provide an implementation for the Java Persistence API. In my opinion, both Hibernate and TopLink provide support to JPA
and they can also be regarded as the complementary to JPA.
Let's wait to see other person's opinions.

Relation between EDI and SAP MM

Hello Gurus,
Is there any relation between SAP MM and EDI...?
Omkar--

Hello Omkar,
There is no specific relation between EDI and SAP MM. SAP MM module is for your internal data while Industry EDI is communication media.
E.g.
If you create a PO in your system , it is related to your MM part while information with regards to craeted PO is supplied to vendor by EDI _ Electronic data interchange.
Hope this will help you.
Amit C kulkarni.

Relation between URL and content in JSF navigation

Hello,
I've tried lots of JSF examples and there always occoured a strange kind of navigation to me:
The URL you see in the browser's address bar has nothing to do with the actually displayed JSP. Instead of that, the URL is always pointing to the previously called JSP - where the call to the current JSP comes from.
I know where this comes from:
If the form tags don't define an action, they are pointing to the current page itself.
And the actually called navigation case is chosen by a (hidden) post parameter.
So the JSF controller servlet doesn't actually care, which URL is called - it just regards the mentioned parameter.
This kind of navigation seems quite confusing, especcially since JSF claims to make navigation clearer.
One of the basic demands of the web applications we are developing is, to have a clear relation between URL and page content.
E.g. it must be possible to index the pages with search engines. Or to simply bookmark distinct pages in the browsers favourites.
Another problem about this navigation concept is, that it always works with forms and with post method (you can't choose get method), even if you just have simple links - e.g. detail view of a single item after selecting it from a list of items. That way it's not possible to ever use the back button of your browser.
I'm new to JSF, so my question:
Is this the (one-and-only) navigation concept of JSF, or are there alternative concepts as well?
I would be surprised, since the mentioned demands are basic web standard - although I didn't find any alternatives so far.
Thanks,
Chily

Thanks for the answer!
I'm not sure, if using a redirect on every single call is very achieveable and in the purpose of the JSF design.
E.g. it is generating a lot of traffic overhead.
(Identifying the navigation case by the page name instead of a hidden parameter would help a lot.)
Or the history of the browser doesn't work with it, so you can't identify visited links.
But anyways, there are also internal problems with it in most cases: I've inserted the <redirect/> tag in the navigation cases of a few examples. This just causes a call of the <to-view-id> page, without any parameters. So I probably have to add some non-standard-processing around the call to make it work:
If e.g. I have the standard case of a list of items (let's say in a dataTable), which are identified by an id. And each item uses a commandLink to call it's detail view.
* How do I get the identifier (id) as a parameter into the redirect URL?
* And how do I access this parameter in the destination form bean to choose the item to be displayed? (see also http://forum.java.sun.com/thread.jspa?threadID=607505)
Thanks for help,
Chily

Relation Between Interest and Risk Categories for Customers

Similar Messages

Maybe you are looking for