Relation between Inventory Process keys and movement types

Dear All,
Is there any way to find the relation between Inventory process keys (which is in SBIW-> Settings for Application specific data sources(PI) -->Logistics -->Settings for IBU Retail / CP --> Transaction key maintenance for SAP BW) and movement types .
Thanks in advance...
Regards,
Raju

Hi,
Please read the note below.
Note 353042 - Howto: Activate transaction key (PROCESSKEY)
It has something for you ....
The process key (0PROCESSKEY and 0BWAPPLNM) of the InfoSources has not been filled. As a result, no key figures are updated because of the update routine of the participating InfoCube and along with it no records are inserted into the InfoCube. In each update routine, the system checks the content of the PROCESSKEY. If this field has no contents, then no data is written into the InfoCube because of the IF condition in the update rules.
Solution
So that you can work in the above mentioned InfoSources, you MUST activate the determination of the process key. This is done with the help of Transaction MCB_ which you can find in the OLTP IMG for BW (Transaction SBIW) in your attached R/3 source system.
Here you can choose your industry sector. 'Standard' and 'Consumer products' are for R/3 standard customers, whereas 'Retail' is intended for customers with R/3 Retail only.
You can display the characteristics of the process key (R/3 field BWVORG, BW field 0PROCESSKEY) by using Transaction MCB0.
If you have already set up historical data (for example for testing purposes) by using the setup transactions (Statistical Setup Programs) (for example: Purchasing: Tx OLI3BW, material movements: OLI1BW) into the provided setup tables (for example: MC02M_0SCLSETUP, MC03BF0SETUP), you unfortunately have to delete this data (Tx LBWG). After you have chosen the industry sector by using  MCB_, perform the setup again, so that the system fills a valid transaction key for each data record generated. Then load this data into your connected BW by using 'Full update' or 'Initialization of the delta process'. Check, whether the system updates data into the involved InfoCubes now.
If all this is not successful, please see Note 315880, and set the application indicator 'BW' to active using Transaction 'BF11'.
Hope this helps.
Raj

Similar Messages

  • Separate Transaction event key and Document type

    Hello Gurus,
    Need suggestion and process how to have separate transaction event key and Document types sued in Material document creation with a different number range for the movement types used for SD processes.
    Example: 601/602/651 movement types have the Transaction event key as WL
                   561 has the Transaction event as WA
                   701/702 movement types have the Transaction event as WI
    the transaction event keys of WA WH WI WL WQ WR WS WZ have the same number range.
    I am looking for solution and suggestion as how do we maintain transaction event key and document type for SD dispatches, cancellation, returns movement types separately.
    Thanks and Regards

    Hi,
       U can create new document type in  OBF4  copy the existing on ee.g WA make new document type and in number range assign the FI  number range which u want to assign,  MM number  range can be create in T. code OMBT and FI number range in FBN1.  Documen ttype assignment to t. code is done in OMBA
    regards,
      zafar
    Edited by: zafar_karnalkar on Aug 13, 2010 12:23 PM

  • Valuation class and movement type

    Hi sirs,
    What exactly mean by valuation class and is there any sublink to valuation class and movement type.
    BSR

    Hi BSR,
    Regarding the meaning of valuation class and link between valuation class and movement type, you just have to understand this.
    <b>valuation class + movement type = transaction key --> GL account</b>
    explanation :
    <b>Valuation class</b>
    It is a field maintained in the accounting view 1 of Material master. This is nothing but the classification of material like Raw material, Finished goods, WP, stores & spares etc. It is indicated as numerical number.
    <b>Movement type</b>
    This is a 3 digit numerical code which is used for all material movement in MM module. Say for example movement type 101 is used for Goods receipt from vendor or from production.
    <b>Transaction Key</b>
    The combination of valuation class and the movement type translates into a transaction key which indicates the type of transaction.
    remember:
    The combination of Valuation Class + the Movement Type helps in determining the GL accounts automatic updates.
    hope it helps and don't forget to assign points.
    regards,
    Lily

  • G/L account change for existing VAX trans event key(601 movement type)

    Hi experts,
    My client wants to post the sales(VAX transaction event key for movement type 601) of a material into new G/L account than the existing one. They dont want to create a new Material type & Valuation class for the same.
    I suggested to create a new class for the existing material type and use the same in OBYC, but they dont want to  create the new valuation class.
    Is there any way do that? pls suggest.
    Regards
    Srin.

    Hi,
    COGS account is always against the Inventory account of the goods Purchased.
    Without raw material account how the consumption account will hit in to the another account or 2 account.
    x: if your one of material Inventory G/Laccount is : 99999
    the same you have COGS account in GBB-VAX  : 77777
    When you make sales the Inventory get reduced/consumed against the COGS account.
    How the system allow you to post in One more account.
    Else you suggest them to chage the existing G/L account.
    Clear with out Inventory account you can't use one more COGS account.
    SAM

  • Condition Type and Movement Type

    Dear all,
    Could anyone explain how the relationshipship between condition type and movement type are being maintain?
    Example : WE03 and Mvt 101,
                    WA03 and Mvt 201.
    Is there any table or tcodes  to view these relationship?
    Thank you.

    Hi
    Both are linked based on the Transaction event type.
    for GR movements the transaction even type is WE
    For GI Movements the transaction event ype is WA.
    Thanks & Regards
    Kishore

  • Relation between the Project defination and the PO

    Hi ,
    Where I can find the relation between the Project defination and Purchase order in CJ20 transaction or in Tables.

    Project definition: A project definition identifies the key characteristics of the overall project. For example, a project definition includes the project profile and organizational details (controlling area, company code, etc.).
    All project definitions must include a settlement rule. A settlement rule contains a G/L account that receives the accrued actuals. In some situations, a settlement rule uses multiple G/L accounts. For example, one G/L account is used for settlement for the first half of a year, but in the second half, a different G/L account is used. However, the settlement rule does not allow for multiple receivers to be active at the same time.
    Regards,
    kushagra Sharma

  • Initial Stock Upload T code MB1C and Movement Type 561through LSMW - Error

    Hi,
    Trying to Upload the Initial Stock, Transaction Code MB1C and Movement Type 561 through LSMW.
    While recording the fileds, system giving a message of Code Block.
    Please let us know about Code Block while uploading the Initial Stock.
    Thanks
    Siddu.

    Check this thread
    [Re: Coding Block in LSMW recording via MB1C|Coding Block in LSMW recording via MB1C;
    thanks
    G. Lakshmipathi

  • I want to know the relation between Retiremen in assets and AR

    i want to know the relation between Retiremen in assets and AR
    whene selleing asset in FA and retire it in AR

    Hello.
    how can i achieve this entry in AR You will have to create it manually. The system does not create it automatically.
    and is their any report in FA to identify the sold assetsThe Asset Retirement Report
    Octavio

  • What is the relation between G/L account and Chart of Accounts

    Hello Guru's,
                       Can you please tell me what is the relation between chart of accounts and G/L accounts.
    I know there was a list or range of account numbers in chart of accounts.
      Assets 100000 - 149999
                    current assets 100000 - 149999
                         cash and cash equivalents 100000- 118999
                             100000 - 100009
                                    100000 - petty cash.
    like this i have chart of accounts. can you please tell what are the G/L accounts.
    Thanks,
    sneha.

    Easiest way is to use the FSV - e gl account hierarchy

  • Relation between Maintenance Order No. and Operation Number

    Hi all,
    I have to make a module pool in which i want to display the following field
    Order No.                                               
    Operation no. | Operation Description |
    Now my problem is that i m not getting the tables from which i have to select data basically i want to extract the data on the basis of Maintenance Order No. and Operation Number.
    I have checked the following tables
    AFKO , AFVu , AFVC, CAUFV.
    But i m not able to find any relation between Maintenance Order No. and Operation Number.
    Please help!!!
    Thanks and regards,
    Rachit khanna

    Hello Rachit,
    The relation is as follows
    AFKO-AUFPL (Routing number is Order header)
    Use this routing number to get operations from AFVC
    AFVC-VORNR gives operation number
    AFVC-LTXA1 gives operation description
    For sub-operations, VORNR will be sub-operation number, and AFVC-SUMNR for this sub-operation corresponds to the respective superior operation(refers to AFVC-APLZL).
    AFVC-APLZL is a unique number for each operation.
    Hope this helps. You can check with some existing/new orders as well.
    let me know if you need anything about split operations as well.
    Best Regards,
    Subhakanth

  • Debit/Credit sign settings of item and movement type usage

    Dear BCS Experts,
    According to your experience, where are Debit/Credit sign settings of item and movement type used in BCS? As I know, they can be used during data collection. Any other thoughts?
    Thanks.

    Actually, Barry, I recognised that that was not a doubt regarding BCF. It was (and still is) a doubt about the MoveType sign for that values that are generated automatically during the CoI activities.
    Since the decrease/increase for such activies is defined, there is a question if the sign of these MoveTypes may interfere with the amounts or the side to be placed in (debit or credit).
    Do you have experience in this?

  • Define main objects for Drag & Relate between BW 3.1 and EP6

    hi all.
    We are trying to implement Drag & Relate between BW 3.1 and EP6.
    We have 2 different BW reports based on the same object "0MATERIAL". One of them should be a source and the other is the target. When creating the iViews for these reports the "main object" property has no values, therefor we don't see any symbol near the object we want to drag. The import of the "0MATERIAL" object from BW to the portal was successful.
    Is it related to customizing the BW system or the portal?
    thanks,
    Sagi

    I solved the problem - I added the BW alias before the main object name in the main object property. For example "BW.0MATERIAL" when BW is the BW system alias and 0MATERIAL is the object name.
    Sagi

  • There is any table which makes the relation between sold to party and ship

    Hi Gurus,
    There is any table which show the relation between ship to party and sold to party.
    regards
    gursharan

    You can get this information from KNVV, KNVP Tables.
    Refer following link: http://www.erpgenie.com/abap/tables_sd.htm ....Customer Master Data for more detailed explanation.
    Please award points if you find this information useful / resolves your issue.
    Letme know if you need more information.
    Thanks,
    Ramesh

  • Posting Key and Document type

    Hello,
    I have just detected an inconsistency in one of my SAP environment (Development).  I have an invoice posted from the SD module, document type of this invoice is RV.
    If there is a reason to cancell this invoice, the transaction used is VF11. The document type in SD for this cancellation is S1. Thereafter an FI document is generated with document type AB.
    Even though the settings in both Production and Acceptance and Developement are the same.
    I have realised that the initial document when cancelled (reversed) has an FI document RV  and posting key 11. whiles in customizing the settings for posting keys and document types are different from what has been customized. Below is my current settings.
    The posting key 01 has a  reversed posting key 12 and the document type RV has a reverse document type AB. This customizing is in correct in SPRO.
    Transactions : OB41 and OBA7
    Can anyone help on this....
    Thanks
    Elvis

    Hello,
    Did you verify whether AB document type in OBA7 is marked in "Account Types allowed" the Customer checkbox?
    If not, maybe that is why it is not selecting AB as the reversal document type for RV, even though it is set up in RV document the AB document type as reverse document type.
    Other than this (if the mentioned above doesn't solve your issue), I would say there should be any user-exit that can be changing the document type, according to some specific business rule of your SAP client or even a substitution.
    I hope it helps you.
    Regards,
    Daniel.

  • Is there a relation between  Adobe Photoshop CS6 and Photoshop Premiere 12?

    Is there a relation between  Adobe Photoshop CS6 and Photoshop Premier 12.  I am presently attending a course on CS6.  Is there a certain similitude between these 2 logiciels?

    Hi Luciebiss,
    Photoshop is a professional tool used throughout many industries as the standard for digital image manipulation and painting. It has very rich, and often complex, tools and options. As such, it comes with a professional price tag.
    Photoshop Elements is a consumer product. It's made for users who don't need as many features and complex options. It has a simpler design, guided workflows, and an organizer to help you manage your files.
    Please refer to below link for more information.
    https://forums.adobe.com/message/4568487
    Thanks

Maybe you are looking for