Relation between J_1IEXCHDR and rbkp and rseg
Hii all ..i'm developing alv report for purchase register and i have to fetch taxes frm J_1IEXCHDR table...
i'm able to fetch data frm rbkp and rseg tables but not able to fetch taxes from J_1IEXCHDR table..can anyone help me hw to relate the exicse table to anyone table which i used above...below r the fields which i want to print in report program
RBKP-BELNR, RBKP-BUDAT, RBKP-LIFNR , RBKP-RMWWR, RBKP-GSBER , RBKP-WMWST1, Rseg-wrbtr, RSEG-BELNR,
RSEG-MATNR, RSEG-WERKS, RSEG-BUKRS, RSEG-MENGE, J_1IEXCHDR-exbed, J_1IEXCHDR-exaed, J_1IEXCHDR-ecs,
J_1IEXCHDR-exaddtax1....
Edited by: venkat akella on Sep 12, 2009 1:40 PM
Hi,
I Have done this report Just go through it..
*& Report :ZEXISMATCH
*& ABAP Developer :Manish Prakash
*& Functional Analyst :Mr. Suresh Yadav
report zexismatch.
type-pools : slis.
**************************************DATA Decleration*********************************
data: fcat_it type slis_t_fieldcat_alv with header line.
data: fcat_layout type slis_layout_alv.
data: wa_event type slis_alv_event,
i_event type slis_t_event,
i_listheader type slis_t_listheader,
l_sort type slis_t_sortinfo_alv,
wa_sort type slis_sortinfo_alv,
i_print type slis_print_alv.
data it_lfa1 like standard table of lfa1 with header line.
tables: j_1iexchdr, j_1ipart2, rseg, bkpf, bsis.
data: begin of wa,
fawref type j_1ifawref,
rdoc2 type j_1iexchdr-rdoc,
budat type budat,
lifnr type lifnr,
exbed type j_1iexcbed,
exaed type j_1iexcbed,
ecs type j_1iexcbed,
exaddtax1 type j_1iexcbed,
tottax type j_1iexcbed,
belnr type bsis-belnr,
dmbtr type dmbtr,
exnum type j_1iexcdtl-exnum,
name1 type lfa1-name1,
end of wa.
data: it_part2 like standard table of wa with header line.
data: it_part23 like standard table of wa with header line.
data it_rseg like standard table of rseg with header line.
data: begin of bk.
include structure bkpf.
data lfbnr type rseg-lfbnr.
data end of bk.
data it_bkpf like standard table of bk with header line.
data it_bkf like standard table of bk with header line.
data off type i value 6.
data: begin of bss.
include structure bsis.
data lfbnr type rseg-lfbnr.
data end of bss.
data it_bsis like standard table of bss with header line.
data it_b like standard table of bsis with header line.
data wa_b like line of it_b.
***************************Selection Screem*************************************************************
selection-screen begin of block a with frame.
select-options: s_date for j_1ipart2-budat,
s_typ for j_1ipart2-trntyp,
s_yer for j_1ipart2-docyr,
s_exg for j_1ipart2-exgrp.
selection-screen end of block a.
select a~fawref a~budat b~rdoc2 b~lifnr b~exbed b~exaed b~ecs b~exaddtax1 b~exnum
into corresponding fields of table it_part2 from j_1ipart2 as a inner join j_1iexcdtl as b
on a~exgrp = b~exgrp
and a~trntyp = b~trntyp
and a~docno = b~docno
and a~docyr = b~docyr where a~budat in s_date and a~trntyp in s_typ and a~docyr in s_yer and a~exgrp in s_exg.
loop at it_part2 .
it_part23-fawref = it_part2-fawref.
it_part23-budat = it_part2-budat.
it_part23-rdoc2 = it_part2-rdoc2.
it_part23-lifnr = it_part2-lifnr.
it_part23-exnum = it_part2-exnum.
it_part23-exbed = it_part2-exbed.
it_part23-exaed = it_part2-exaed.
it_part23-ecs = it_part2-ecs.
it_part23-exaddtax1 = it_part2-exaddtax1.
collect it_part23.
clear it_part2.
endloop.
refresh it_part2.
it_part2[] = it_part23[].
loop at it_part2 .
it_part2-tottax = it_part2-exbed + it_part2-exaddtax1 + it_part2-exaed + it_part2-ecs.
modify it_part2 transporting tottax.
endloop.
select belnr lfbnr from rseg into corresponding fields of table it_rseg
for all entries in it_part2 where lfbnr = it_part2-rdoc2.
select * from bkpf into corresponding fields of table it_bkpf
where bukrs = '7000' and gjahr in s_yer and tcode = 'MIRO' ."AND BLART = 'RE'.
sort it_bkpf by awkey.
data : w_len type i.
loop at it_bkpf .
w_len = strlen( it_bkpf-awkey ).
w_len = w_len - 4.
it_bkpf-awkey = it_bkpf-awkey+0(10).
modify it_bkpf transporting awkey.
endloop.
sort it_rseg by belnr.
sort it_bkpf by awkey.
loop at it_bkpf .
read table it_rseg with key belnr = it_bkpf-awkey.
if sy-subrc = 0.
it_bkpf-lfbnr = it_rseg-lfbnr.
modify it_bkpf transporting lfbnr.
else.
delete it_bkpf.
endif.
*CLEAR it_bkpf.
endloop.
it_bkf[] = it_bkpf[].
select bukrs hkont augdt augbl zuonr gjahr buzei belnr shkzg dmbtr from bsis
into corresponding fields of table it_b for all entries in it_bkpf
where belnr = it_bkpf-belnr and bukrs = '7000' and gjahr in s_yer "AND HKONT eq '6113'
and ( hkont = '0000006113' or hkont = '0000006123' ).
APPEND wa_b to it_b.
loop at it_b .
it_bsis-belnr = it_b-belnr.
it_bsis-belnr = it_b-belnr.
case it_b-shkzg .
when 'S'.
it_bsis-dmbtr = it_b-dmbtr.
when 'H'.
it_bsis-dmbtr = - it_b-dmbtr.
WHEN OTHERS.
endcase.
collect it_bsis.
endloop.
sort it_bkpf by belnr.
loop at it_bsis .
read table it_bkpf with key belnr = it_bsis-belnr.
if sy-subrc = 0.
it_bsis-lfbnr = it_bkpf-lfbnr.
modify it_bsis transporting lfbnr.
endif.
endloop.
sort it_bsis by lfbnr.
loop at it_part2 .
read table it_bsis with key lfbnr = it_part2-rdoc2.
if sy-subrc = 0.
it_part2-belnr = it_bsis-belnr.
it_part2-dmbtr = it_bsis-dmbtr.
modify it_part2 transporting belnr dmbtr.
endif.
clear: it_part2, it_bsis.
endloop.
select * from lfa1 into corresponding fields of table it_lfa1
for all entries in it_part2 where lifnr = it_part2-lifnr.
loop at it_part2 .
read table it_lfa1 with key lifnr = it_part2-lifnr.
if sy-subrc = 0.
it_part2-name1 = it_lfa1-name1.
modify it_part2 transporting name1.
clear it_lfa1.
endif.
endloop.
*SORT it_part2 by belnr.
perform get.
fcat_layout-colwidth_optimize = 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = sy-repid
i_grid_title = ''
is_layout = fcat_layout
it_fieldcat = fcat_it[]
it_events = i_event[]
it_sort = l_sort
i_save = 'A'
i_callback_top_of_page = 'TOP_OF_PAGE'
tables
t_outtab = it_part2 " IT_PART2
exceptions
program_error = 1
others = 2.
*& Form set_pf_status
text
-->RT_EXTAB text
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'STANDARD_4'.
endform. "set_pf_status
*& Form get
text
form get.
clear fcat_layout.
fcat_layout-colwidth_optimize = 'X'.
fcat_layout-zebra = 'X'.
fcat_layout-no_keyfix = 'X'.
" SET_CELL_COLOURS
clear fcat_it.
fcat_it-fieldname = 'FAWREF'.
fcat_it-tabname = 'IT_PART2'."it_ltab
fcat_it-no_zero = 'X'.
fcat_it-seltext_l = 'Ex Doc. No.'.
append fcat_it.
clear fcat_it.
fcat_it-fieldname = 'EXNUM'.
fcat_it-tabname = 'IT_PART2'."it_ltab
fcat_it-no_zero = 'X'.
fcat_it-seltext_l = 'Invoice No.'.
append fcat_it.
clear fcat_it.
fcat_it-fieldname = 'BUDAT'.
fcat_it-tabname = 'IT_PART2'."it_ltab
fcat_it-no_zero = 'X'.
fcat_it-seltext_l = 'Excise Dt.'.
append fcat_it.
clear fcat_it.
fcat_it-fieldname = 'LIFNR'.
fcat_it-tabname = 'IT_PART2'."it_ltab
fcat_it-no_zero = 'X'.
fcat_it-seltext_l = 'Vendor Code'.
append fcat_it.
clear fcat_it.
fcat_it-fieldname = 'NAME1'.
fcat_it-tabname = 'IT_PART2'."it_ltab
fcat_it-no_zero = 'X'.
fcat_it-seltext_l = 'Vendor Name'.
append fcat_it.
clear fcat_it.
fcat_it-fieldname = 'TOTTAX'.
fcat_it-tabname = 'IT_PART2'."it_ltab
fcat_it-no_zero = 'X'.
fcat_it-seltext_l = 'Excise'.
append fcat_it.
clear fcat_it.
fcat_it-fieldname = 'BELNR'.
fcat_it-tabname = 'IT_PART2'."it_ltab
fcat_it-no_zero = 'X'.
fcat_it-seltext_l = 'MIRO Doc. No.'.
append fcat_it.
clear fcat_it.
fcat_it-fieldname = 'DMBTR'.
fcat_it-tabname = 'IT_PART2'."it_ltab
fcat_it-no_zero = 'X'.
fcat_it-seltext_l = 'MIRO Excise'.
append fcat_it.
endform. "get
*& Form eventtab_build
text
-->LT_EVENTS text
form eventtab_build changing lt_events type slis_t_event.
constants:
gc_formname_top_of_page type slis_formname value 'TOP_OF_PAGE'.
gc_formname_end_of_list TYPE slis_formname VALUE 'END_OF_LIST'.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = lt_events.
read table lt_events with key name = slis_ev_top_of_page
into ls_event.
if sy-subrc = 0.
move gc_formname_top_of_page to ls_event-form.
append ls_event to lt_events.
endif.
READ TABLE lt_events WITH KEY name = slis_ev_end_of_list
INTO ls_event.
IF sy-subrc = 0.
MOVE gc_formname_end_of_list TO ls_event-form.
APPEND ls_event TO lt_events.
ENDIF.
endform. "EVENTTAB_BUILD
*& Form top_of_page
text
form top_of_page.
*ALV Header declarations
data del(150) type c.
data del1(150) type c.
data: t_header type slis_t_listheader,
wa_header type slis_listheader,
wa_header1 type slis_listheader,
wa_header2 type slis_listheader,
wa_header3 type slis_listheader,
wa_header4 type slis_listheader,
t_line like wa_header-info,
ld_lines type i,
ld_linesc(100) type c.
wa_header-typ = 'H'.
wa_header1-typ = 'S'.
wa_header2-typ = 'S'.
wa_header3-typ = 'H'.
wa_header4-typ = 'H'.
wa_header-info = 'HINDUSTAN PULVERISING MILLS'.
wa_header1-info = '209-210 Anupam Bhawan , Azadpur, Delhi - 110033'.
wa_header2-info = '----
wa_header3-info = ld_linesc.
wa_header4-info = del1.
append wa_header to t_header.
append wa_header1 to t_header.
append wa_header2 to t_header.
append wa_header3 to t_header.
append wa_header4 to t_header.
clear wa_header.
wa_header-typ = 'S'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
append wa_header to t_header.
wa_header-typ = 'S'.
append wa_header to t_header.
clear: wa_header.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
I_LOGO = 'ENJOYSAP_LOGO'.
I_END_OF_LIST_GRID =
I_ALV_FORM =
endform. "top_of_page
*slis_ev_end_of_list
Similar Messages
-
I want to know the relation between Retiremen in assets and AR
i want to know the relation between Retiremen in assets and AR
whene selleing asset in FA and retire it in ARHello.
how can i achieve this entry in AR You will have to create it manually. The system does not create it automatically.
and is their any report in FA to identify the sold assetsThe Asset Retirement Report
Octavio -
What is the relation between G/L account and Chart of Accounts
Hello Guru's,
Can you please tell me what is the relation between chart of accounts and G/L accounts.
I know there was a list or range of account numbers in chart of accounts.
Assets 100000 - 149999
current assets 100000 - 149999
cash and cash equivalents 100000- 118999
100000 - 100009
100000 - petty cash.
like this i have chart of accounts. can you please tell what are the G/L accounts.
Thanks,
sneha.Easiest way is to use the FSV - e gl account hierarchy
-
Relation between Maintenance Order No. and Operation Number
Hi all,
I have to make a module pool in which i want to display the following field
Order No.
Operation no. | Operation Description |
Now my problem is that i m not getting the tables from which i have to select data basically i want to extract the data on the basis of Maintenance Order No. and Operation Number.
I have checked the following tables
AFKO , AFVu , AFVC, CAUFV.
But i m not able to find any relation between Maintenance Order No. and Operation Number.
Please help!!!
Thanks and regards,
Rachit khannaHello Rachit,
The relation is as follows
AFKO-AUFPL (Routing number is Order header)
Use this routing number to get operations from AFVC
AFVC-VORNR gives operation number
AFVC-LTXA1 gives operation description
For sub-operations, VORNR will be sub-operation number, and AFVC-SUMNR for this sub-operation corresponds to the respective superior operation(refers to AFVC-APLZL).
AFVC-APLZL is a unique number for each operation.
Hope this helps. You can check with some existing/new orders as well.
let me know if you need anything about split operations as well.
Best Regards,
Subhakanth -
Define main objects for Drag & Relate between BW 3.1 and EP6
hi all.
We are trying to implement Drag & Relate between BW 3.1 and EP6.
We have 2 different BW reports based on the same object "0MATERIAL". One of them should be a source and the other is the target. When creating the iViews for these reports the "main object" property has no values, therefor we don't see any symbol near the object we want to drag. The import of the "0MATERIAL" object from BW to the portal was successful.
Is it related to customizing the BW system or the portal?
thanks,
SagiI solved the problem - I added the BW alias before the main object name in the main object property. For example "BW.0MATERIAL" when BW is the BW system alias and 0MATERIAL is the object name.
Sagi -
There is any table which makes the relation between sold to party and ship
Hi Gurus,
There is any table which show the relation between ship to party and sold to party.
regards
gursharanYou can get this information from KNVV, KNVP Tables.
Refer following link: http://www.erpgenie.com/abap/tables_sd.htm ....Customer Master Data for more detailed explanation.
Please award points if you find this information useful / resolves your issue.
Letme know if you need more information.
Thanks,
Ramesh -
Is there a relation between Adobe Photoshop CS6 and Photoshop Premiere 12?
Is there a relation between Adobe Photoshop CS6 and Photoshop Premier 12. I am presently attending a course on CS6. Is there a certain similitude between these 2 logiciels?
Hi Luciebiss,
Photoshop is a professional tool used throughout many industries as the standard for digital image manipulation and painting. It has very rich, and often complex, tools and options. As such, it comes with a professional price tag.
Photoshop Elements is a consumer product. It's made for users who don't need as many features and complex options. It has a simpler design, guided workflows, and an organizer to help you manage your files.
Please refer to below link for more information.
https://forums.adobe.com/message/4568487
Thanks -
Relation between a Purchase Organisation and Reference PORg
Hi ,
1) Can any one explain me what is the relation between a Purchase Organisation and Reference Purchase Organistion.
2) I have removed the assignment of Purchase organisation 1000 to the Reference POrg 6666 . I want to do the testing in development server after making the above configuation change. Can any one let me know how to do the testing to see that this configuration change is taken place?.
Thanks in advance.hi
Ref. Pur Organisation is used when there is no centralized pur. organisation. You have to define 1 pur. organsation as refernce pur. organisation and link other pur orgnisations to this ref. pur. orgaisation. When you create a contract using this pur. organisation and this contract can be used by other pur orgasations which are linked to this ref. pur oganisation.
Ref. Pur Organisation is basically used for better negotiation.
Eg- You are having 2 plants (A & B) of 2 different company code(A & B).
1. Pur org A is assigned to company code A & plant A
2. Pur Orga B is assigned to company code B & plant B.
3. Ref pur organisation C is created and linked to Pur organisation A and B.
Scenario -
Vendor A can supply Material A 1000 qty at Rs. 100 whereas more than 1000 qty at Rs. 90.
But your requirement for Plant A is Rs. 800 and Plant B is Rs.700
If you create a contract on plant basis to the Vendor A then you have to pay Rs. 100.
But if you create a contract with ref pur organisation C for total requirement of Rs.1500 without plant basis then rate will be only Rs.90.
Then this contract can referred by both the plant and can be converted to P.O at Rs.90. -
Relation between the Project defination and the PO
Hi ,
Where I can find the relation between the Project defination and Purchase order in CJ20 transaction or in Tables.Project definition: A project definition identifies the key characteristics of the overall project. For example, a project definition includes the project profile and organizational details (controlling area, company code, etc.).
All project definitions must include a settlement rule. A settlement rule contains a G/L account that receives the accrued actuals. In some situations, a settlement rule uses multiple G/L accounts. For example, one G/L account is used for settlement for the first half of a year, but in the second half, a different G/L account is used. However, the settlement rule does not allow for multiple receivers to be active at the same time.
Regards,
kushagra Sharma -
Reg : Relation between Atonomous GPS positioning and Network carrier Blackberry 9630
Hi,
In my organization we are using Blackberry 9630 mobiles for person tracking.My application requests Location updates for every 15 secs.Some times My application is not getting GPS Position for hours.For other Blackberry mobiles (9300,8900,8820,8310) it is working fine.I googled this problem,some people linking this issue with Network carrier .Please tell me what is the Relation between Atonomous GPS positioning and Network carrier .
Mobile : Blackberry 9630 CDMA
O.S 5.0
GPS Mode : GPS Satellites
Thanks and Regards
P.Ramkumar.Hi ramkumar
This could be related to Cell Site Location services. Some wireless providers use triangulation with their wireless towers to provide an approximate location. This location is not typically accurate within a couple kilometers. The BlackBerry will use Cell Site Location if it is unable to retrieve a GPS location.
You will have to consult with your wireless provider to determine if its supported.
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Relation between Invoice Line items and Accounting Line item
Dear All,
My requirement is to print all the invoice documents and it's tax values like cenvat, Ecess, BED and VAT.
I have to fetch these tax details from BSEG table .
I' am getting Invoice number ( RBKP-BELNR ) from BKPF-AWTKEY .
Can any one please tell me how to relate the Invoice line items and Accounting document line items..
Any BAPI or FM is there to retrieve these data.
Please do needful in this regard.Hi,
from table bseg - field Koart
K = Vendor
D = Customer
S = G/L account here tax lines identify with buzid = T
or take table bset for taxes
Andreas -
Relation between Prod. Hierarchy and Profit Centre
Dearest all,
does anybody know what the relation between prod. hierarchies and profit centre?
actually, i am trying to display total of actual line items (table GPCPT, if i am not wrong). The total value grouped by Profit Centre?
But I want to display them per Product hierarchies...
Question:
1. More than 1 product hierarchies could be assigned to 1 profit center, right ? (I checked in the matl master, checking all matl)
2. Could I find other way to do this ? any suggestion ?
thanks in advance,
meHi Barry,
I have tried MCSI, it displayed "no data found", what does it mean ?
Thanks in advance,
me -
Relation between Inventory Process keys and movement types
Dear All,
Is there any way to find the relation between Inventory process keys (which is in SBIW-> Settings for Application specific data sources(PI) -->Logistics -->Settings for IBU Retail / CP --> Transaction key maintenance for SAP BW) and movement types .
Thanks in advance...
Regards,
RajuHi,
Please read the note below.
Note 353042 - Howto: Activate transaction key (PROCESSKEY)
It has something for you ....
The process key (0PROCESSKEY and 0BWAPPLNM) of the InfoSources has not been filled. As a result, no key figures are updated because of the update routine of the participating InfoCube and along with it no records are inserted into the InfoCube. In each update routine, the system checks the content of the PROCESSKEY. If this field has no contents, then no data is written into the InfoCube because of the IF condition in the update rules.
Solution
So that you can work in the above mentioned InfoSources, you MUST activate the determination of the process key. This is done with the help of Transaction MCB_ which you can find in the OLTP IMG for BW (Transaction SBIW) in your attached R/3 source system.
Here you can choose your industry sector. 'Standard' and 'Consumer products' are for R/3 standard customers, whereas 'Retail' is intended for customers with R/3 Retail only.
You can display the characteristics of the process key (R/3 field BWVORG, BW field 0PROCESSKEY) by using Transaction MCB0.
If you have already set up historical data (for example for testing purposes) by using the setup transactions (Statistical Setup Programs) (for example: Purchasing: Tx OLI3BW, material movements: OLI1BW) into the provided setup tables (for example: MC02M_0SCLSETUP, MC03BF0SETUP), you unfortunately have to delete this data (Tx LBWG). After you have chosen the industry sector by using MCB_, perform the setup again, so that the system fills a valid transaction key for each data record generated. Then load this data into your connected BW by using 'Full update' or 'Initialization of the delta process'. Check, whether the system updates data into the involved InfoCubes now.
If all this is not successful, please see Note 315880, and set the application indicator 'BW' to active using Transaction 'BF11'.
Hope this helps.
Raj -
Relation between RD Connection broker and RD session host farm in 2012 R2
Good Day
I have configured standard RDS session based deployment recently on 2012 R2 servers
Everything is working as expected
The setup has TWO RD Session host, 1 Session Broker, one RD Web access and one RD Gateway
I have created 2 DNS records named Rdsfarm.domain.com for my RDS1 and RDS2 session host servers and if I connect to this
rdsfarm.domain.com with RDP from TS clients, i am able to connect to any one of TWO rds servers without any problem
However some part is not clear to me
I have not added rdsfarm.domain.com any where except my RD Gateway server RAP policy
Also I have added my RD Broker server in RAP allowed group above.
I don't see any config where this farm name is associated with my RD Broker server
I have tried to connect to RD broker server from client, but it didn't redirect me to RD session host servers
If I try to connect to my RDS servers with their FQDN , it gives me error that I must connect thru farm name
Can you please help me to understand relation between RD session host servers farm and RD broker server ?
Also I would like to know what exactly happens in background when user start RDP session by entering RDS farm name
Note that RDS farm name is generic DNS Host(A) record pointing to my both RD session host servers
I wanted to know is there any command or configuration I missed out as I don't see any config where Generic RD Session Host Farm name (DNS Host(A) record) is associated with my RD Broker server ?
Thanks
Best Regards
MaheshHi,
If you are opening Remote Desktop Connection and manually connecting to the broker then it will not work properly because you have no way of specifying the target collection in the user interface. If manually using the RD Client to connect is a requirement
what you can do is set the default collection in the RD Connection Broker server's registry.
To specify the default collection, please create the registry setting below in the broker's registry:
HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\ClusterSettings
DefaultTsvUrl REG_SZ tsv://vmresource.1.<VDI pool ID>
To determine the correct value for DefaultTsvUrl please open RDWeb in a non-IE web browser and click on the icon for the collection you would like to be the default, then edit the downloaded rdp file with Notepad and copy the portion of the loadbalanceinfo
setting that is similar to the above.
An alternative would be to download the .rdp file from RD Web Access and double-click it to connect.
As I mentioned above it is generally intended to have users connect via RD Web Access or RemoteApp and Desktop Connections feed or Remote Resources (uses the feed) so that the client will obtain the proper .rdp file from the server.
To configure the FQDN that is published in the .rdp files you can use the cmdlet below:
Change published FQDN for Server 2012 or 2012 R2 RDS Deployment
http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80
Below is a sample configuration based on what you have written:
1. Published FQDN (using cmdlet above): rdsfarm.domain.com --> points to ip address of RDCB server. When launching a RemoteApp or Full Desktop connection from RD Web Access, the prompt window will show this FQDN next to Remote computer.
2. Gateway FQDN: gateway.domain.com --> externally points to public ip address of your RD Gateway server. TCP port 443 and UDP port 3391 need to be forwarded to the RDG's internal ip address. When launching a RemoteApp or Full Desktop
connection from RD Web Access, the prompt window will show this FQDN next to Gateway server. This FQDN is set in Server Manager -- RDS -- Overview -- Deployment Properties -- RD Gateway tab.
In RD Gateway Manager -- Properties of RD RAP -- Network Resources tab you should select Allow user to connect to any network resource or define a RD Gateway-managed group that has all of the FQDNs that the user will need to connect to.
3. RD Web Access FQDN: remote.domain.com --> internally points to the ip address of your RDWeb server, externally points to the public ip address of your RDWeb server. This is the name you give users if they want to use RD Web, for example,
https://remote.domain.com/rdweb
If you want users to manually connect using Remote Desktop Client as well as use RDWeb it will be a bit confusing to them since they will need to use one FQDN when manually using the client and a different FQDN when using RDWeb. You could fix this
by having them only use one method or run RDWeb directly on the RDCB server, that way users would only need to know a single FQDN for both RDWeb and manual connections.
4. You should have a wildcard certificate with subject of *.domain.com set for all RDS purposes in Deployment Properties.
Thanks.
-TP -
Relation Between Service Rendered date and Pricing
Hi All,
I have a sale order for both sevice item and product.and it is order related billing.I have already billed the service line item.Now when i change the service rendered date in the sale order header,the net price for that service item becomes zero.
Can any one pl help me out in this.Hi
The service rendered date is the date the system uses to calculate the price for the item.
if u change the date subsequently , if the price is zero , you may check the codnition records validty end
if the validity of the condition record has expired
thanks
akasha
Maybe you are looking for
-
MBP 15" core i5 battery calibration
Hi Last time I bought a MacBook, it came with a detailed instruction on how to calibrate the battery for maximum performance. When I got my MBP 15", 2.4 GHz core i5 recently, it came without such instructions. I thought that might be because the new
-
I am experiencing difficulty opening some web-based PDF documents on my iPad. I had exactly the same difficulty on my iMac (after I upgraded to Yosemite) but was able to overcome it by adjusting the Adobe Reader plug-in security settings in Safari (i
-
How do I import or copy fields into a new PDF?
I had to edit word document. Adobe is only finding the older fields formatting. I still have the fillable PDF with the fields I need. How do I bring this over to the new blank PDF or get adobe to recognize it? I really dont want to spend hours receat
-
Creating an external table.
Please help, I need to load a csv to an external but i kept running into error. see the syntax below: SQL> CREATE TABLE PSOPRDEFN 2 ( 3 OPRID VARCHAR2(30 BYTE), 4 VERSION INTEGER , 5 OPRDEFNDESC VARCHAR2(30 BYTE), 6 EMPLID VARCHAR2(11 BYTE), 7 EMAILI
-
Feed RSS, periodic errors on Safari
I have many feed RSS in the Safari bookmark bar, uniforms for topic and ordered. They work very well and they have replaced for a long time searches readings and consultations. But periodically, approximately every two or three months, some of they a