Relation between OTA_ACTIVITY Tables
Hi,
Can some one explain the relation between ota_activity_definitions, ota_activity_versions,ota_category_usages,ota_act_cat_inclusions tables as how hey are related to one another.
Thanks in advance.
Have you checked eTRM? I guess you will get what you are looking for there.
Similar Messages
-
Relation between MSEG table and movement types in 2lis_03_bf
Hi all,
May i know the relation between MSEG table and 2lis_03 _bf xtractor stock type/stockcategory where we see the informarion in r/3 side for this, you answers gets rewarded.
regards,
Dan.Hi,
Most of the data for IM comes from the tables MSEG andd MKPF. You can go to MSEG contents and see the data there. You will find all the movement types, stock types and stock categories there. You can also use the transactions MB5B, MB51 etc.. to see the related info in R/3. As I said most of the data comes from these tables but not all the data. It uses some internal programming to get the data.
Hope it helps... -
What is the Relation between System Tables and FND Table?
Hi,
I have two LOV's. First one is Module Name. Here I will select Module Name as GL, AP, AR.... In the second LOV it should populate all the API's available in the module. I tried with the following tablesFND_APPLICATION AND ALL_SOURCES. But there is no relation between these tables.
Can anyone suggest me..
Please help me out.
Thanks in Advance,
SateeshHi,
I have two LOV's. First one is Module Name. Here I will select Module Name as GL, AP, AR.... In the second LOV it should populate all the API's available in the module. I tried with the following tablesFND_APPLICATION AND ALL_SOURCES. But there is no relation between these tables.
Can anyone suggest me..
Please help me out.
Thanks in Advance,
Sateesh -
Relations Between MLCD table and material movements type
Dear all,
I Have a question about relations between MLCD table and Material movements. For Example We have a movement type Z71 when we did a movevent with tis movement type from MB1C Transaction. System creates a record in Mlcd Table. in this table Category field is VN and PCat field is V. How system decides about VN and V
is there any table which contains these conversions or is there any custimization in MM or CO modules ?
Could you please help me if you have any information about subject.
Best RegardsHi Anupam
Thanks for your speedy reply.sorry i forget to mention i need FG materials details for given plant,production version,metrial type.In
MKAL i am not able to give material type as input parameter
Regards
Bala -
How to check relation between two tables in same database
How to check relation between two tables in same database using Oracle SQL developer. Version 2.1.1.64
Hi,
Try this,
SELECT cons.owner AS child_owner, cons.table_name AS child_table,
cons.constraint_name constaint_name,
cons.constraint_type constraint_type, col.owner parent_owner,
col.table_name parent_table, col.column_name column_name
FROM dba_cons_columns col, dba_constraints cons
WHERE cons.r_owner = col.owner
AND cons.r_constraint_name = col.constraint_name
AND col.owner = 'MY_USER'
ORDER BY child_table;Thanks,
Shankar -
Make relation between 2 table programilly
how can I make a relation between 2 tables ( one to many) through code
and also broke this relation through codeYou just need these commands:
https://msdn.microsoft.com/en-US/library/zkyz3407%28v=vs.80%29.aspx
https://msdn.microsoft.com/en-US/library/sdwsys0z(v=vs.80).aspx
Bye, Olaf.
Olaf Doschke - TMN Systemberatung GmbH http://www.tmn-systemberatung.de -
Hierarchical query To find the relation between the tables
Hi,
In my database schema i have hundreds of tables and dont have data model to understand the relation between them.
I heared that there will be heirarchical query which can be written by using meta tables, is this query will really help me to understand the relations.
Can anybody please help to get this query.
Thanks,
Vinod>
Hi Vinod,
I heared that there will be heirarchical query which can be written
by using meta tables, is this query will really help me to understand the relations.You could also download Data Modeler - it should be of assistance - free from
Oracle.
HTH,
Paul...
Vinod -
How to create a relation between to tables
hi all
i have two oracle database:one is oratest(sourse),the other is orawh(destination).
i have a table named hr.jobs in oratest,and a table named hr.test in orawh.
now i want to create a relation between these two tables to make them synchronized.But i have no idea how to deal with such a case.
somebody help me please,thanks a lot!!
Best regards!You can use DML_HANDLERS at the apply side and manipulate the LCR's so that when data is inserted on TABLEA at source it can inserted in TABLEB at target.
More information on DML Handlers are available at oracle documentation. -
Relation between REGUH table and Infotype 0015( PA0015table)
Hi Experts,
Can anyone provide some info. about use of REGUH table. Like when it is used/updated esp. in context of HR Payroll?
Functionally,What is the relation between Infotype 0015 and REGUH?
Thanks
Achyuthi,
REGUH table stores the amounts which are used for check printing and bank transfer for an Employee.
this table is updated by running a program called 'pre-program DME'. once you update this table, then you can print checks/ perform bank transfer.
so this table holds all the amounts even WT's amounts given in IT0015.
hope i answered your question.
if you have still queries, just revert back.
regards,
salman. -
How to implement Master - Detail relation between two table views in OBI11g
Hi Gurus,
I was able to create master- detail between table and graph.
But between two tables not.
I put the listening column on the table prompt and specified channel for the Listen to Master-Detail Events in the table properties.
But did not work.
Where is the mistake?
I"d appreciate any ideas, help!
Thanks
LaszloThanks for the link!
My question is :
Are the same thinga the page edge and table prompt for the tables?
If not how to add a column to the page edge (not to the table prompt)?
Thanks
Laszlo -
Relate between two tables in ALV REPORT(SAP-ABAP)
Hi Friends,
I want to retrieve name1 and city1 from <b>kna1</b> , and kunrg from <b>vbrk</b>.
Could u pls tell me on what basis i should pick these value ?
Thx and Regds,
BapiHi
tables: kna1
select single KUNNR name1 ort01 from kna1 where kunnr = vbrk-kunrg.
or
select single KUNNR name1 ort01 from kna1 where kunnr = vbrk-kunag.
write: / kna1-kunnr, kna1-name1, kna1-ort01.
<b>
link between tables is
VBRK-KUNAG = KNA1-KUNNR (customer/Sold to party)
Reward points for useful Answers</b>
Regards
Anji
Message was edited by:
Anji Reddy Vangala -
How to find the relation between that tables
Hi,
I have to get the data from different tables but I dont have any table relation ship. So If any body can help me to get that relation ship that will be very helpful for me.
my tables are
LFA1
LFB1
LFC1
RFSDO
BSIK
Thanks
Imran>
SURINDER SINGH OBEROI wrote:
> Hi,
>
> LFA1-LIFNR = LFB1-LIFNR = LFC1-LIFNR = BSIK- LIFNR
> LFB1-BUKRS = LFC1-BUKRS = BSIK-BUKRS
> LFC1-GJAHR = BSIK-GJAHR
> LFC1-ERDAT = BSIK-AUGDT
>
> Cheers,
> Surinder
You think, you can fetch accurate data with the above mentioned linkages?
Oh btw, the question i believe the question was How to find the relation....
pk -
Relation between objects - table
Hello,
I have created a relation object in FI document with function:
obj_rolea-objkey = 'E02580000145052010'.
obj_rolea-objtype = 'BKPF'.
obj_roleb-objkey = 'FOL24000000000004URL36000000000088'.
obj_roleb-objtype = 'MESSAGE'.
CALL FUNCTION 'BINARY_RELATION_CREATE'
EXPORTING
obj_rolea = obj_rolea
obj_roleb = obj_roleb
relationtype = 'URL'
FIRE_EVENTS = 'X'
EXCEPTIONS
ENTRY_NOT_EXISTING = 1
INTERNAL_ERROR = 2
NO_RELATION = 3
NO_ROLE = 4
OTHERS = 5
I need to know where the relation are saved, which are the table were the data are saved to see the relation of other documents.
Anyone can help me.
Best Regrads,
Eduardo PaivaTable SRGBTBREL
-
Relation between different tables in extended star schema
Hi Experts,
I searched all many threads to understand the how Attribute change run is used for
But a small question is going still.
Is attribute change run used for getting consistent data from aggregates or from infocubes.
Attribute change run is used to update the master data .Then what is the use of "activate master data "
in context menu of the master data infoobject.
Somewhere I have read that Attribute change run is used for updating Aggregates but it has got nothing to
do with Infocubes,Is it right ?
Please clarify me
Thanks in advance
SundarHi Sundar,
Is attribute change run used for getting consistent data from aggregates or from infocubes.
The purpose of ACR is to update the changes happened in master data to aggregates not for aggregates.
Attribute change run is used to update the master data .Then what is the use of "activate master data "
in context menu of the master data infoobject.
when you click on activate master data, the data in P or Q or X or Y tables will get activated(if any records with version M will turned to version A)
ACR is used to update the same changes to aggregates
Somewhere I have read that Attribute change run is used for updating Aggregates but it has got nothing to
do with Infocubes,Is it right ?
Yes you are wright.here we have small logic when ACR is running if you start any rollup step it will get fail.
While ACR is running aggregates will get locked
Regards,
Venkatesh -
Relation Between BPEG & PRPS Table
Can anyone let me know the relation between BPEG Table & PRPS Table in Project System
Hi
kindly check the PRPS table and BPEG tables.
PRPS - WBS element master table
BPEG - Line Item Overall Values
link is PRPS-OBJNR = BPEG-OBJNR.
Thanks
Sunil
Maybe you are looking for
-
Hi Everyone, I have a mac mini running 10.3.9, it's used by a web design company and they're really happy with it - until all of the fonts disappeared from Font Book. You can still use the fonts in applications so it's not a massive problem but I sti
-
I want to buy an ipod touch 5th generation but I have been researching them on the Internet and I discovered that people are having problems with the usb getting stuck in devices. Is this a problem with the new ipod touch 5th generation? has anyone
-
Why are my facebook friends in my contacts?
When I try to load my phone contacts, my facebook friends are listed in my contacts as well (if they've posted their phone number or email address on facebook). I do not want all of those random contacts in my phone, only the ones I have put in ther
-
How to Transmit video over h263-2000/rtp
I want to transmit a 3gp video over h.263-2000/RTP but this format is not supported by JMF APIs. I tried installing Fobs4jmf plugin in order to read 3gp video file but the supported output formats are h263/rtp and jpeg/rtp....nothing about h263++/rtp
-
In Premiere Pro CC, everything plays fine, but all need rendered?
Every picture and video clip on my 6 minute timeline has a red bar above it, but it plays back regardless. Is this something I should worry about? I'd been working on this project from another computer for a while - a newer iMac (2013) - and I just