Relation between R3 kernel version 640 and 4.6B, C D

Hi,
What is the relation between R3 Kernel 640 version and SAP 4.6B, C, D versions. Based on R3 kernel version how to identify the sap version e.g. 4.6B, C D etc.
Thanks.
Anirudh,

Hello Anirudh,
Every SAP release will have its own set of kernel releases
SAP Kernel 7.00 is valid for ECC 6.0.
SAP kernel 640 is actually valid from SAP R/3 Enterprise 4.7. it is also valid for ECC 5.0
For 4.6 C kernel release 46D is available.
For 4.6B SAP Kernel 4.6B and 4.6 C are available.
For 4.6A 4.6A,4.6B and 4.6C are available.
This is what is available in marketplace however I have heard about something called downward compatability of kernels which means lower releases can have higher kernels.
You must always go for the highest available kernel patch.
However kernel is OS bit size specific
Regards.
Ruchit.

Similar Messages

Relation between the BP on EBP and BP on ROS

Where is can i see relation between the BP on EBP and BP on ROS besides Supplier Monitor?
What's table?
I saw BP ROS number in BP on EBP (u201CVendor Datau201D tab, "Link to Backend System" view), but it disappear.

Hi
For BP on EBP
Go to SE16 : Enter BUT* Press F4 ..
All the BP related tables will appear
Regards
G.Ganesh Kumar

Is there a relation between the Engineering Change Management and MM

Hi SAP MM Gurus,
Is there a relation between Engineering Change Management and Materials Management? I know we get the versions changes updated in Material Master. But do not know where is the origin for ECM. Step by step configuration is appreciable.
Thanking in Advance.
with regards
Ravi Babu

Hi ,
I have created an application and have created end users also who will be using this application. For each of these users i have to give access to application in such a way that they will be able to see only their area a work. So how do i do this ..this needs to done based on the login user_name..my question now is how or from where will i get the current session details like user_name, current session id ,current session date and time?
Thanks in advance,
Bhargavi

Relation between QuickTime 7.1.1 and AirPort problems

I've read a few thread talking of relations between
the last QuickTime 7.1.1 update and problems with AirPort
in one way or the opposite.
As this looked quite hard to explain I thoroughly checked
the QuickTime 7.1.1 update package and I can tell everyone for
sure:
it doesn't include a bit that could interfere with the
AirPort driver or software
You could double check it for yourself with the following
steps:<pre>
1. within "Software Update...", select "QuickTime 7.1.1"
and select "Update > Download Only"
2. in a Terminal or xterm window, type the following
commands:
my_mac$ cd /Library/Packages/QuickTime711.pkg/Contents
my_mac$ gzcat Archive.pax.gz | pax | egrep -i 'air|802'
my_mac$ cd Resources
my_mac$ egrep -i 'air|802' cleanup-list InstallationCheck
my_mac$</pre>
Then, if your AirPort was "apparently" broken or repaired
just after the QuickTime 7.1.1 update, this was simply
due to the restart of your system.
dan

If you've got quicktime pro working with 7.1.3, count yourself lucky considering all the reports about 7.1.5 problems. I was about to download QT Pro when I started reading the reviews. Most of them were bad. Is it working for you with 7.1.3, especially on creating media files? Do you use it with Final Cut Pro? I'd appreciate your feedback.

Relation between the Height in Pixels and Font Size?

Hi All,
I wanted to find the relation between the Font Size and the Pixels that it will occupy. What i want to do is i have an Icon and a Label. The icon size i need to resize to the Half the height of the Label. But the font Size does not reflect the height in Pixels. Please can you help me find the right way to resize the Icon?
Thanks in Advance,
Sameer

FontMetrics fm = label.getFontMetrics( label.getFont() );Once you have the font metrics you can use the getHeight() method.

Relations between SAP AII, ONS, PML and Savant???

The EPCGlobal provides a standard EPC-Network containing the EPC-Code and infrastruture-components like the RFID-Tag and -Reader, the ONS-Server, the PML-Server and a RFID-Middleware called Savant.
On the one hand I found a couple of articles where the SAP Auto-Id Infrastructure (SAP AII) is said to be a "RFID-Middleware". On the other hand I found a lot of presentation sheets with illustrations of the SAP AII architecture where the SAP AII is connected to Savant by the device controller and to the ONS/PML Servers by SAP XI.
Can anybody inform me about the relationship between the SAP AII, the ONS/PML Servers and Savant? Is the SAP AII a substitute for Savant? Which component of the SAP Auto-ID Infrastructure asks the ONS-Server for the URL to a PML Server where further information about an object which is identified by the EPC code are located? Are product information stored on a PML-Server anyway? Or are information only stored in the ERP-Backendsystem?
Thank you for your reply.

hi.Dirk
1)SAP AII is a "RFID-Middleware", but mostly it is a RFID Middleware for business process. It focus on business more than RFID readers. So it is not a RFID Reader manager(Device connector, or something like that)
2)Savant is a specification or a product release by EPC global. You can download the savant specification on EPC global .
http://www.epcglobalinc.org/about/AutoID_Archive/documents/6_auto_id_savant-1_0.pdf
Savant is also a product, many company IBM, SUN make their RFID Middleware follow the EPC savant specification. And also EPC has a RFID-Middleware call savant.
Savant is design to manager RFID readers, filter RFID tag information, and log events.
3)The relation between AII and savant is they are on the diferrent layer of RFID Middleware, they should be work together.
4)ONS is another EPC RFID issue, it is design to record RFID tag data. On EPC's idea, all the data about RFID tag should be record on ONS server. I do not know if it will come true in the future.
5) On SAP solution, Most of the data is still stored in SAP backend-system(R3,SCM,BW......), and information about RFID, e.g. RFID tag, RFID device, tag event is stored in SAP AII. And you can use BW in AII, if mass data is generated.
6) PML is just a RFID XML.
Regards
Sheng

What is relation between atc1 (item master attachment) and item master.

hi.
i am having some problem.
ie.
what is the relation between atc1 and item master header....
i want to execute the below query.... and i want to get the line no from the sql.
if u ask what is the difficulty..
one.jpg may be two items can upload ...the same image. i can not filter based on the file name
select Line from atc1 where FileName ='one.jpg'
is it possible like
select Line from atc1 where FileName ='one.jpg' and itemcode='one'

Hi,
Try this:
SELECT T1.[Line] FROM OITM T0 left join ATC1 T1 on T1.[AbsEntry] = T0.[AtcEntry] WHERE T1.[FileName] =[%0]
It will displace name of the file which is attached to item master.
Thanks & Regards,
Nagarajan

Relation between Sales Organization, Sales Office and Sales Group in SAP

Hi!
I want to know the relation between Sales Organization( VAKPA -VKORG), Sales Office( VAKPA-VKBUR) and Sales Group ( VAKPA-VKGRP) in SAP.
Relation in the sense, does One-to-One or One-to-Many relation exist between them..or do they form an hierarchy??
Thanks

Sales Org---->sales office: 1:N (routed through sales area i.e sales organization,distribution channel and division)
each sales office belongs to only one sales org.
each sales office may consists, many sales groups:
Sales office to Sales Group: 1:N (each sales group belongs to only one sales office- sales group means group of people)
Thanks
Chidambaram

Relation between Sales org , Dist Channel and Division

Hello all ,
I need to know where the relation between Sales Org. , dist channel and Div is stored in CRM . I need to create search help which will get Dist channel and Division for a particular sales orgnization .
Helpful answers will be rewarded .
Thanks ,
Shounak M.

Any Suggestions ?
Thanks ,
Shounak M.

Any relation between my ram card cover and my screen?

if i touch my ram card cover (while the computer is running) the screen flickers, gets fuzzy and has lines running up and down it. is there a relation between the two?

The prices indicated on both links are the same. However, the answer to your question is that all MacBooks, MacBook Pros, Intel Minis, and Intel iMacs all use the same type and spec RAM. You will find the appropriate information in the computer's User Guide. It's also described in the Apple guide on how to install the RAM.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Relation between Ap down payment invoice and Ap invoice

Hi sap members
pls help in this scenario what is the query relation for ap down payment invoice and ap invoice solution given vilbe appreciated
regards
Jenny
Edited by: Jennifer Anderson on May 3, 2010 11:02 AM

hi Gordon
can u write a query and send regarding this relation i need fields like
SELECT Distinct T0.[DocNum][Invoice No ], T0.[CardName], T0.[DocTotal], T1.[DocNum][Ap Down Payment No],T1.[CardName], T1.[DocTotal]
FROM OPCH T0 , ODPO T1
WHERE T0.[CardName] = T1.[CardName]
and T0.[DpmAmnt] = T1.[DocTotal]
GROUP BY T0.[DocNum], T0.[CardName], T0.[DocTotal], T1.[DocNum],
T1.[CardName], T1.[DocTotal]
in Ap invoice Query i need Ap down payment Docnum
Regards
Jenny

Relation between record in a form and insert statement written in button

hi all,
i am using Forms [32 Bit] Version 6.0.8.24.1 (Production).
i have a master detail form with relation
A is master of B, B is master of C and a button which resides on control block(other than A,B,C).
so i will insert a one record into the block 'A' and i will press button which will insert particular record into particular table.
so when i try to move to next record('A' block) it is asking for database change. when i give 'yes' everything is ok. but when i give 'no'(w.r.t that record) and moves to next record and inserts the record and insert record throguh button also, at this time user press 'yes' then the first record is not saving but what ever i have inserted through the insert statement is not rolling back.
How can i control insert statement with the respect to datablock change in the block.
The block 'C' data is going to the other table through insert statement the block 'C' i am posting. So due to 'post' the block is not getting cleared so insert statement is also firing.
In other words i want to unpost the posted data when user press 'no' in the database message.
I know there is nothing to do with the forms message. But is its possible to control when user press 'no' then the insert statement should not gets saved into the table.
Please help.
Thanks..
Edited by: GD on Jun 27, 2011 5:38 AM

First off, you need to understand how Oracle Forms interacts with an Oracle database. Forms natively handles all DML transactions for you. Meaning, if you have a Forms data block based on a database table, Forms will generate all the necessary DML to handle any changes that occur in that block. You do not need to write your own DML statements in code.
so i will insert a one record into the block 'A' and i will press button which will insert particular record into particular table.Is Block "A" based on a table? How are you inserting the record into the table? If you are writting your own DML to insert the record this would explain why you are being prompted to save when you change records. As I mentioned, if your block is based on a table, Forms will know if you change a value within the block.
How can i control insert statement with the respect to datablock change in the block.If your blocks are based on tables, let Forms handle the DML! don't do it yourself.
In other words i want to unpost the posted data when user press 'no' in the database messageIf your block is based on a table, when you are prompted to save changes - answering 'NO' will automatically clear the current record of the data block (in essence - rollback the change).
Craig...

Regression between jdbc thin version 9 and 10.1.0.3

Hi all,
I tried to get a Date columns as a String with a specific format using the following technique:
dStatement = connection.createStatement();
dStatement.execute("alter session set NLS_DATE_FORMAT='YYYY-MM-DD HH24:MI:SS'");
((OracleStatement)dStatement).defineColumnType(1, Types.VARCHAR);
ResultSet rs = dStatement.executeQuery("select aDateColumn from...");
rs.next();
String aDate = rs.getString(1);
it worked fine in 9.2.0.5, but it failed on 10.1.03. I gives me the standard oracle format, which has got a .0 after the seconds.
Actually, in 10.1.0.3, I can do :
((OracleStatement)dStatement).defineColumnType(999, Types.VARCHAR);
and then execute a query that return 1 columns without even an exception.
Any workarounds not involving to_char() and getDate()?

The application works in windows machines (mainly
Windows 2003), running .Net and in Linux running
JBoss.
In Windows, we use the usual fat client (OCI) - MS
drivers for Oracle. Which data access methods or APIs are you using?
Microsoft's .Net provider for Oracle "requires Oracle Client software 8.1.7 or later". MS' other drivers from back in the days are designed for Oracle 7 and possibly 8.0.x, but no later.
Why are you not using Oracle's drivers "for Oracle"?
In Java, we use the thin client.>
We have now a new customer that has 10.1.0.3.0, and
due to other existing applications, he can't upgrade.Is that on the db side or app server?
>
We've made lots of tests in 10.2.0.3.0, and have now
some clients using it in this version.
I just need the RDBMS and client drivers changes (if any).Your app is closest to client drivers and if you have made a lot of tests, perhaps you should stick to this version of Client. The db side is slightly different. Oracle certifies interoperability between Net client and server. So I guess you need to map out which db specific features you are using and any install scripts, management procedures, etc. that may differ.
I would assume that from a 10.1 to a 10.2, no
change could break my code, but unfortunately my
experience taught me not to be so confident.Obi One has taught you well...

Kernel version, GCC and modules

Several issues with modules occurred after today's kernel upgrade.
I think that the kernel that is pushed should be compiled with the compiler that we have in our systems.
If the kernel is compiled with a different gcc than the one that we have (today's 4.0.1 kernel is compiled with gcc-5.1) then we get issues with modules that we need to compile (e.g. vmware).
I solved worked around this issue by uncommenting the testing and the testing-multilib (i got skype) repo, to download gcc-5.1 and all its deps, compile the vmware modules with it and downgrade everything back.
Last edited by redsolja (2015-04-30 08:10:56)

redsolja wrote:
eduncan911 wrote:
redsolja wrote:
More to the topic, I think that there is a better solution/workaround for this, especially for a new installation.
You can just recompile the archlinux kernel, using exactly the same configuration file, but with your own gcc version (4.9.2). I think that this will enable compiling the vmware (and other) modules easier.
I would suggest using kernels and abs.
Just coming back to say you were right! Rebuilding the kernel using the gcc version is the cleanest approach to stay on tip (and I'm assuming rebuilding the kernel every time a new version is released).
https://bbs.archlinux.org/viewtopic.php … 7#p1526907
I don't think that you 'll need to compile the kernel each time a new kernel is released. I guess gcc-5.1 isn't that far from getting into [core]. Just remember there are at least 3 workarounds for this:
enable [testing] repository and issue a pacman -Syyu. After that, compile the modules that you want to compile with the new gcc version. This is will work for as long as gcc-5.1 is in [testing] AND the kernel is compiled with that version. To get the gcc version that compiled the kernel you are booting, issue a journalctl -b and close to the top, you should see a line that looks like this:
arch kernel: Linux version 4.0.1-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
recompile the kernel with the gcc version that your system has. This is the most helpful article i think
downgrade. I would suggest downgrade
I am pretty sure that people will come with more workarounds for this, but I find these to to be the simplest.
Thanks. Yep, those are options. But for vmware I did try all 3.
#1 i could get to compile with patched source under gcc 5.1 in testing but the binary would hard lock the VM guest. I did this on two different machines and two Arch setups. So i don't think it was me.
#3 downgrading the kernel couldn't be done on a new install without the pacman cache for the previous kernel. someone did link me to the ARM archives and i was in the process of locking down my pacman to a specific date. but that started to feel dirty, limiting my entire system just to get an older kernel. one of the main reasons i'm switching to Arch is to have the latest and greatest. but if i time lock my pacman, what's the point?
hence, why i ended up with #2 - just use ABS and recompile the existing kernel and headers.
thanks again! it was really helpful!
Last edited by eduncan911 (2015-05-08 12:26:38)

IC - how to make relation between e-mails from BPs and BPs

Hello,
In IC Win when I send email to BP system saves it in relation to BP (so I can later search it in CRM). But what about
e-mails from BPs. How I can relate them to BPs? Or how CRM can make relation automatically?
Regards
Radek

Hello Radek,
You can implement GW and transfer emails from GroupWare into CRM. Onc we transfer emails into CRM, you can create activities/attach emails to the BPs.
Regards,
Paparao

Relation between R3 kernel version 640 and 4.6B, C D

Similar Messages

Maybe you are looking for