Relation between resolution and sampling rate of an ADC

Dear sir,
Is there any relation between the resolution and the sampling rate of an ADC. If so please explain it in detail.
If I use NI 9237 Module for the acquisition of signal from load cell, then what is the minimum time required by it to acquire one sample.If the sampling rate is 50KS/s and resolution is 24 bit, how will you caculate the minimum time required by it to acquire one sample. Please explain it in detail.
According to my knowledge it would take 20microseconds. Is this is correct?
Will this resolution also plays a role in that time?
Thanks and Regards
A.Giridhar yadav

Hi Giridhar,
For 9237, resolution is fixed to 24 bits and doesn't not effect by sampling rate.
Therefore, you can measure up to 1/50k=20us time between sample at 24 bits with 9237.
Regards, Kate

Similar Messages

How to get data from three tables (A,B,C) having one to many relation between A and B .and having one to many reation between b and c

i have three tables A,B,C. there is one to many relation between A and B. and one to many relation existed between table b and c . how will get data from these three tables

check if this helps:
select * --you can always frame your column set
from tableA a
left join tableB b on a.aid=b.aid
left join tableC c on c.bid=b.bid
This is just a general query. However, we can help you a lot more, if you can post the DDL + sample data and required output.
Thanks,
Jay
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

Relation between sapstartsrv and saphostexec

I am trying to implement note 1826767 which says:
Resolution
Configure https for the sapstartsrv process. The necessary steps are described in the chapter 'Configuring HTTPS for the SAP Host Agent' in the SAP HANA Automated update guide.
My question is what is the relation between sapstartsrv and saphostexec here, i.e. why configuring HTTPS saphostexec is equivalent to configuring HTTPS for sapstartsrv? sapstartsrv and saphostexec are 2 different executables.
Thanks!

Hi Christina,
In newer versions of SAP, SAPHostExec
saphostexec is an executable that runs under root (UNIX) or the Local System Account (Microsoft Windows). It controls all of the functions for which a special user of this type are required, such as the operating system collector saposcol and sapacosprep. It is connected to sapstartsrv in host mode using a local socket, which ensures quick and secure communication and is also started during the startup of the host.
Refer SAP help Monitoring Hosts with SAPHostControl and saphostexec - Infrastructure of the SAP NetWeaver Management Agents - SAP Libra…
When you check the status of saphostexec using the command
/usr/sap/hostctrl/exe/saphostexec -status
You will see below processes
saphostexec running (pid = 4729)
sapstartsrv running (pid = 4732)
saposcol running (pid = 0)
I guess the relation is clear for you.
Hope this helps.
Regards,
Deepak Kori

Table relations between vbrk and bkpf for Accounting Document Number

hello,
i am using 4 tables to get data into my programs.
vbrk,vbrp konv and bkpf.
i want to get belnr from bkpf.i found relation between vbrk and belnr.but in vbrk table belnr's value is initial.
can anybody tell me that how should i relate vbrk and bkpf or how to get Accounting Document Number(belnr) from bkpf for Billing Document(vbeln).
regards,
soniya s.

hi,
chekc this. its working for me.
data : WA_AWKEY LIKE BKPF-AWKEY.
data : WA_BELNR LIKE BKPF-BELNR.
data : LENGTH TYPE I.
*BREAK MTABAP.
LENGTH = STRLEN( IT_VBRK-VBELN ).
if LENGTH = '10' .
MOVE it_vbrk-VBELN TO WA_AWKEY.
SELECT SINGLE BELNR FROM BKPF INTO WA_BELNR
WHERE AWKEY = WA_AWKEY
AND AWTYP = 'VBRK'
and blart = 'RV'.
it_final-acc_doc = WA_BELNR.
CLEAR WA_BELNR .
CLEAR WA_AWKEY .
else.
CONCATENATE '0' it_vbrk-vbeln INTO wa_awkey.
SELECT SINGLE BELNR FROM BKPF INTO WA_BELNR
WHERE AWKEY = WA_AWKEY
AND AWTYP = 'VBRK'
and blart = 'RV'.
it_final-acc_doc = WA_BELNR .
CLEAR WA_BELNR .
CLEAR WA_AWKEY.
endif.

How to make relation between gl_je_lines and wip_transaction_accounts

I try to write script to make relation between GL and WIP, wip_transaction_accounts and mtl_material_transactions
1.
SELECT
(SELECT meaning
FROM mfg_lookups
WHERE lookup_type = 'WIP_TRANSACTION_TYPE'
AND lookup_code =
(SELECT TRANSACTION_TYPE
FROM wip_transactions
WHERE transaction_id = wta.transaction_id
) "Transaction Type" ,
gjb.NAME "Journal Batch Name" ,
gjh.NAME "Journal Name" ,
gjh.je_source "JE Source" ,
gjh.je_category "JE Category" ,
glp.period_num "GL Month" ,
glp.period_year "GL Year" ,
gjh.default_effective_date "GL Date" ,
NVL(gje.accounted_dr,0) -NVL( gje.accounted_cr,0) "GL Line Amount" ,
gje.description "GL Line Description" ,
(SELECT organization_code
FROM mtl_parameters
WHERE organization_id = wta.organization_id
) "ORG Name" ,
NULL "Vendor/Customer Name" ,
NULL "SO/PO Number" ,
NULL "Reference Number" ,
NULL "AP/AR Invoice Number" ,
NULL "Doc Sequence Value" ,
NULL "Invoice Type Lookup Code" ,
NULL "Check Number" ,
NULL "Line Type" ,
NULL "Category" ,
NVL (wta.base_transaction_value, 0) "Transaction Amt" ,
NULL "AR/PO Receipt Number" ,
NULL "Applied Invoice Number" ,
(SELECT a.segment1
FROM mtl_system_items_b a ,
wip_discrete_jobs b
WHERE a.inventory_item_id = b.primary_item_id
AND a.organization_id = b.organization_id
AND b.wip_entity_id = wta.wip_entity_id
AND b.organization_id = wta.organization_id
) "Item Name" ,
gcc.segment1 "Company" ,
gcc.segment2 "Department" ,
gcc.segment3 "Account" ,
(SELECT description
FROM fnd_flex_values_vl fnd
WHERE flex_value_set_id = 1009707
AND TO_CHAR (fnd.flex_value) = gcc.segment3
) "Account Description" ,
gcc.segment4 "Intercompany" ,
NULL "JE Category Description" ,
NULL "AP Invoice Line Description"
TRUNC (wta.transaction_date) "JE Creation/Inv Trans Date" ,
NULL "JE Created By" ,
NULL "Reversal Flag" ,
NULL "Reason Code" ,
NULL "Subinventory Name" ,
wta.primary_quantity "Quantity" ,
NVL (wta.base_transaction_value, 0) "Value" ,
gje.context ,
gje.attribute1 ,
gje.attribute2 ,
gje.attribute3 ,
gje.attribute4 ,
gje.attribute5 ,
DECODE(gjh.status,'P','Posted','U','Unposted','Error') "Post Status"
FROM gl_je_lines gje ,
gl_je_headers gjh ,
gl_je_batches gjb ,
wip_transaction_accounts wta ,
gl_code_combinations gcc ,
gl_periods glp
WHERE 1 =1
AND gje.je_header_id = gjh.je_header_id
AND gjh.je_batch_id = gjb.je_batch_id
AND UPPER (gjh.je_source) = 'INVENTORY'
AND gcc.code_combination_id = gje.code_combination_id
AND wta.reference_account = gje.code_combination_id
AND TRUNC(wta.transaction_date) BETWEEN glp.START_DATE AND glp.END_DATE
AND gje.reference_1 = wta.gl_batch_id
AND gje.gl_sl_link_table = 'WTA'
AND glp.period_name = gjh.period_name
AND glp.period_set_name = 'OVT_US_CAL'
==
2.
SELECT mtt.transaction_type_name "Transaction Type" ,to_char(mmt.transaction_date,'mm/dd/yyyy hh:mi:ss') as teas, mta.transaction_id,mta.organization_id, mmt.organization_id,
gjb.NAME "Journal Batch Name" ,
gjh.NAME "Journal Name" ,
gjh.je_source "JE Source" ,
gjh.je_category "JE Category" ,
glp.period_num "GL Month" ,
glp.period_year "GL Year" ,
gjh.default_effective_date "GL Date" ,
NVL(gje.accounted_dr,0) - NVL(gje.accounted_cr,0) "GL Line Amount" ,
gje.description "GL Line Description" ,
(SELECT organization_code
FROM mtl_parameters
WHERE organization_id = mta.organization_id
) "ORG Name" ,
NULL "Vendor/Customer Name" ,
NULL "SO/PO Number" ,
mmt.TRANSACTION_REFERENCE "Reference Number" ,
NULL "AP/AR Invoice Number" ,
NULL "Doc Sequence Value" ,
NULL "Invoice Type Lookup Code" ,
NULL "Check Number" ,
NULL "Line Type" ,
NULL "Category" ,
NVL (mta.base_transaction_value, 0) "Transaction Amt" ,
NULL "AR/PO Receipt Number" ,
NULL "Applied Invoice Number" ,
(SELECT segment1
FROM mtl_system_items_b
WHERE inventory_item_id = mmt.inventory_item_id
AND organization_id = mmt.organization_id
) "Item Name" ,
gcc.segment1 "Company" ,
gcc.segment2 "Department" ,
gcc.segment3 "Account" ,
(SELECT description
FROM fnd_flex_values_vl fnd
WHERE flex_value_set_id = 1009707
AND TO_CHAR (fnd.flex_value) = gcc.segment3
) "Account Description" ,
gcc.segment4 "Intercompany" ,
NULL "JE Category Description" ,
NULL "AP Invoice Line Description"
TRUNC (mta.transaction_date) "JE Creation/Inv Trans Date" ,
NULL "JE Created By" ,
NULL "Reversal Flag" ,
(SELECT MGD.SEGMENT1
FROM MTL_GENERIC_DISPOSITIONS MGD,
MTL_MATERIAL_TRANSACTIONS MMTT
WHERE MGD.DISPOSITION_ID = MMTT.TRANSACTION_SOURCE_ID
AND MMTT.TRANSACTION_SOURCE_TYPE_ID = 6
AND MGD.ORGANIZATION_ID = MMTT.ORGANIZATION_ID
AND MMTT.TRANSACTION_ID = MMT.TRANSACTION_ID
) "Reason Code" ,
mmt.SUBINVENTORY_CODE "Subinventory Name" ,
mta.primary_quantity "Quantity" ,
NVL (mta.base_transaction_value, 0) "Value" ,
gje.context ,
gje.attribute1 ,
gje.attribute2 ,
gje.attribute3 ,
gje.attribute4 ,
gje.attribute5 ,
DECODE(gjh.status,'P','Posted','U','Unposted','Error') "Post Status" -
FROM gl_je_lines gje ,
gl_je_headers gjh ,
gl_je_batches gjb ,
mtl_transaction_accounts mta ,
mtl_material_transactions mmt ,
mtl_transaction_types mtt ,
gl_code_combinations gcc ,
gl_periods glp
WHERE 1 =1
AND mta.transaction_id = mmt.transaction_id
AND gje.je_header_id = gjh.je_header_id
AND gjh.je_batch_id = gjb.je_batch_id
AND UPPER (gjh.je_source) = 'INVENTORY'
AND gcc.code_combination_id = gje.code_combination_id
AND mta.reference_account = gje.code_combination_id
AND TRUNC(mta.transaction_date) BETWEEN glp.START_DATE AND glp.END_DATE
and mta.request_id=mmt.request_id
and mta.inventory_item_id=mmt.inventory_item_id
AND gje.reference_1 = mta.gl_batch_id
AND gje.gl_sl_link_table = 'MTA'
AND mtt.transaction_type_id = mmt.transaction_type_id
AND glp.period_name = gjh.period_name
AND glp.period_set_name = 'OVT_US_CAL'
When gl_je_lines have multiple line this script on the same transaction_id it will get wrong information. By setup all wip_transaction_accounts.GL_SL_Lind_id and mtl_transaction_accounts.GL_SL_Lind_id is null
Anyone can help?

Hello.
How are you reaching the inconsistencies ? Are you comparing report's results?
Octavio

Database table/FM to find relation between plant and company code in SRM

Hi,
I have a requirement where I need to determine the relation between the plant and company code in SRM.
The plant and company code both belong to R/3. We are replicating the plant by using the report BBP_LOCATIONS_GET_ALL.
This plant is now available as a BP in SRM. But from which SRM table or using which SRM FM can I get the relation between this and the company code?
Thanks,
Srivatsan

Hi
Check table BBP_LOCMAP. (Plants) - Manage Table Business Partner > System > Location
BBP_COMPCODE_FAV User-Specific Favorites for Permitted Company code.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

"current encoder settings for bit rate and sample rate are invalid" message

I have some files I am working with. Details and what happened:
Had some music files where I was doing some trimming/splitting. Files worked fine in itunes.
Open the files in Quicktime Pro 7 to trim them. Exported to aif.
Opened the files with itunes. They open and play just fine.
In Itunes I click"create AAC version" to convert them.
I receive the message "An error occurred while trying to import the file. The current encoder settings for bit rate and sample rate are not valid for this file."
I don't know what to do from here. Suggestions?
Thanks.

Make sure that the AIFFs that you export are set for 16 bit PCM.
Also, assuming that you are using 44.1 kHZ sampling in your AIFFs, make sure that you are not trying to use 48 kHz in the AAC.

HT202856 What resolutions and refresh rates does the MacBook Pro support?

Why does this article provide lots of useful information EXCEPT the piece I want? It does not show what resolutions and refresh rates the MacBook Pro supports over Displayport:
http://support.apple.com/kb/HT6008
I've heard it only supports 4k at 30 Hz. Is this true?

For some reason Displays no longer shows that information, so I don't know what it is. However, the last time I saw the information on a 2009 MBP it was 75.
I'd think there is a utility around that might provide the info like Display Maestro 1.1.7 or SwitchResX.

In Finder how do I get iTunes to show bit rate and sample rate of an entry?

In Finder how do I get iTunes to show bit rate and sample rate of an entry so I can set my DAC?

TonyEyes wrote:
In Finder how do I get iTunes to show bit rate and sample rate of an entry so I can set my DAC?
Tony, Make sure you are in Songs view. Then View > Show View Options, and check the boxes for "Bit Rate" and "Sample Rate." See picture:

Relation between Rollup and compression.

Hi All,
Is there a relation between rollup and compression ? i.e if i compress the cube, will the rollup job be faster ?

Hi,
Thanks for all your replies. Now the picture is crystal clear.
1. A compression job moves data from F table to E table. This is also applicable for aggregates. If you schedule a compression job for a cube, the aggregates are automatically compressed( You can also compress aggregates of a cube without compressing the cube. There are programs avalibale for the same).
2. Assume that you have not done compression . If you load the data to base cube ,it takes more time to create the indexes after loading.
3) Assume that you have done compression . If you load the data to base cube ,it takes less time than 2 point to create the indexes after loading.
On similar lines, if aggregates of a cube are compressed before rollup, then rollup will be faster. This is what exactly I have experienced. I had a cube which had 1000 request. It was never compressed. The rollup job for the cube used to take around 60,000 seconds. I compressed 900 requests. Now the rollup job gets over in 2400 seconds.So the conclusion is the following:
When aggregates of a cube are compressed, the rollup job runs faster.
Message was edited by: Tej Trivedi

Table that gives the relation between plant and company code

Hi gurus,
I actually have plant number and using this plant value i need to get the company code.
Is there any table that gives the relation between plant and company code. So,that i can get the company code details.
Thanks in advance.

Hi Bhanuphani,
Use T001K where BWKEY is the plant
Reward if useful
Thanks Arjun

Is any relation between customerNo and Plant in R/3

hi,
in bapi_salesorder_cretefromdat2 i can get netprice by giving import parameters like customerNo,salesArea,material, etc.......That means customer should be assinged to a plant(one sales area can have many plants( material price can vary from plant to plant) .pls give me clear picture on how net price is calculated in bapi_salesorder_createfromdat2.
regards
Guru

There is a relation between customer and plant in the KNA1 General Data in Customer Master table.
kna1-kunnr
kna1-werks.
Kindly reward the points

Is There any Relation Between PCD and SSO

Hi,
Is there any relation between PCD and SSO, why because if i am try to connect from portal to R/3 in the user mapping i got one error i.e some pcd error.
pls tell me how to rectify that.
Regards,
Jagadish Babu Kanikanti.

Hi Jagadish
The PCD is only a central persistance for storing Portal objects. There is no such relation between PCD and SSO that could create a problem. You can however check for the PCD error in this manner.
1. In the system administration role, choose System Administration -> Support. The Support Desk appears.
2. Select the area Portal Content Directory.
3. Click on PCD Configuration in the test and configuration tools. The next screen shows all the parameter values currently maintained for the PCD.
4. To reload the configuration, choose Reload.
Hope that helped.
Best Regards
Priya

Can any one explain me the relation between BDC and reports events?

hi experts.....
can any one explain me the relation between BDC and reports events? we are using report events in BDC programmes why?\
Is reports events occurs in each and every concept in ABAP i.e creating custom idocs, smart forms, sap scripts, dialog programmes, module pool technics?
thanks in advance

The forums are expert forums. So the first thing I would do is change your name.
It's like entering a grand prix in a car with a "Student Driver" sign.
Rob

Urgent :Relation between vendor and business area

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hi ,
Is there any table or transaction which will give an one-to-one relation between vendor and business area?
Thnks and Regards,
Anand

hi
in this situation u have to creat new Z table and Z transaction with link of this both . it will solve ur problem . better to take abaper help other wise u can use T-CODE se11 to creat table.
se93 for transaction code .

Relation between resolution and sampling rate of an ADC

Similar Messages

Maybe you are looking for