Relation between Shop id and Internet User in CRM

Hi Guru's,
We are using SAP CRM 4.0. Can you please let me know in SAP CRM backend how can i find the shop id from the Internet User. We have created a BSP application and hosted in Portal. In the BSP application we want to determine the sales area from shop id. I can see shop id stored in database table 'CRMM_ISA_SHOP_H' and function module 'CRM_ISAI_SALES_AREA_GET' to get the sales area from the shop id. But i am not able to determine the shop id from the logged in Internet User. Can you help?
Regards,
Priyank

In your scenario, there is no relation between the Internet User and the Shop Id.
In the web (ISA), Shop ID is determined as follows:
1. It is either given as a parameter in the URL so that the user doesn't have to select it or
2. If there is only one Shop, then there is no need. The application defaults to that. or
3. If there are more shops,then the user is presented with a screen to make the selection.
You will have access to the Shop ID within the ISA Java-ABAP framework, but not in an independent BSP application such as yours. You have to make the user select the shop if there are multiple web shops.

Similar Messages

Relation between CPU load and # of users

Dear all :
is their a relation between # of cpus and cpu load
if i have 100 concurent user how many cpu should dedicated to it ?

from where can i get benchmark?From your brain.
If I give you a benchmark, it will be valid with my load, not yours. You need to create a benchmark that reflects your load.
I have no idea what kind of load you have. Nor does anyone else ...
... unless you have a OTS or COTS application (Off The Shelf or Customized Off The Shelf). In which case your vendor (or developer) should have some clue.
(Refraining from comments about the majority of developers ...)

Relation between employee data and SAP user ID

Hi experts,
I am searching a relation between a SAP User Id and the personal data of an employee like Infotype 2.
Is there any relation like this?
Thanks!

Hi,
The SAP User ID is attached to employee number using communications infotype IT 0105 subtype 0001.
Also e-mail, fax, telephone number are stored in this infotype under different subtypes.
hope this helps
Ajay

Relation between Business Partner and User

Hi everyone.
Where can i found the relation between the business partnes and user in the tables of CRM application.
Thanks.
Mauricio N.

But in the database where is located this data, which is the table in the database that has the relation between business partners and users???
Thanks,
Mauricio N.

'Standard Role' 'User' 'Business Partner' and 'Internet User'

hii
Currently I m working on E-Recruitment 6.0 BSP's..
Can somebody explain me....
1)
'Role' 'User' 'Business Partner' and 'Internet User'
Kindly help me undertand the relation between the above mentioned IDs and there creation
2)
I have created Business Partner(External Person) ID using BP(txn)...Kindly let me know how to create the 'Internet ID' and 'PW'
So that I can use it for HRRCF_StART_EXT (BSP)
kindly explian...or mail me any documention related to
E-recruitment to my id [email protected]
Looking for a immediate reply
Regards,
Raghav

Role - is the same as the concept of role in R3. SAP Delivers some pre confogured authorisation profiles for some standard roles.
Roles are assigned to user depending on the client's requirement.
Business Partner is the same as BP in CRM. basically, the following will be BPs in ur system:
Each independent user of the recruitment process - as BP Branch.
All third party recruitment vendors as BP Type Agency.
All employees will also be BP in the system.
All external applicants.
You can create internet user using the t code SU05. You can also use the R3 sytem user credentials to log on to the url application by configuring the system to use the SAP login. (this is done thru t code SICF)
Hope this helps.

What is the relation between adobe forms and web dynpro

hi
what is the relation between adobe forms and web dynpro

Hi Jyothsna,
Adobe forms are advanced to smartforms and scripts.
Adobe forms are much easier than smartforms they are online forms.
they can be developed online.
Adobe forms : This is another SAP tool designed to create your own forms. The transaction for this is SFP.
How to use them: You can create a sales order form in adobe form and send to the sales reps. Sales reps can fill this form when they are not connected to internet / SAP system. Once they connect to SAP just send an e-mail to a specific user id in outlook. You got to customize and code how do you want to process once you receive this form. This enables you to create orders even when you are not connected to the system. Hence no data loss. This is not how i used though :-). This is just my idea.
What is the difference between Adobe forms and smart forms / scripts.
Smart forms / scripts are used to show the data in SAP. Most likely you will use these to print / display some kind of reciepts / forms. Many companies must be using this for hard copies / ALE / EDI or to transfer data from SAP to others.
Adobe forms are used to post data into SAP from SAP too. So this has an additional feature compared to smartforms.
Please check this link
http://www.erpgenie.com/index.php?option=com_content&task=view&id=600&Itemid=77
Web dynpro in one of the component in NETWEAVER.
Web Dynpro is the SAP NetWeaver programming model for user interfaces and provides support when developing the Web representation of business applications. The Web Dynpro model is based on the Model View Controller paradigm, and has the following features that build on the classic dynpro model:
·        Clear separation of business logic and display logic
·        Uniform metamodel for all types of user interfaces
·        Execution on a number of client platforms.
·        Extensive platform independence of interfaces
please check this link
http://help.sap.com/saphelp_nw04/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
Best regards,
raam

Relation between business process and functional area during the role search

Hi Experts,
We have 2 functional areas in which we have different business process involved.
During the Access request, if the user selects one functional area then business process related to that functional area should come.
Is there any functionality in GRC, where the mapping between functional are and business process to be done?
Thanks,
Sriram

Hi Sri,
there is relationship between 'Business process' and 'Sub-business' process as in configuration parameter you can setup that once business process is selected only relevant sub-process will be selected.
There is no such a relation between functional area and business process.
Filip

Relation between RFC time and Roll wait time

Hello
What is the relation between RFC time and Roll wait time?
In a diagram from E2E100 training I took recently the relationship is made out to be:
RFC+CPIC = some processing time + Roll wait time
Something like this
Processing----
Roll wait-------
Roll in
RFC+CPIC----
In the diagram I saw it shows that roll out occurs during processing.
Assumming that the user context rolls out and then rolls in again, wouldn't "Wait" time occur when the request comes back and the dispatcher has to assign the request to a work process?
Is this wait time calculated as "Wait" time or is it calculated as "Roll wait" time?
I was forced to think about this because of a STAD record I have with high Roll wait time, but with low RFC time as well as zero GUI time. If "Wait" time when the request comes back from RFC is included in "Roll wait" then it might explain what i'm seeing.
Kind regards,
Peter

Hello Santosh,
Thank you for your reply.
I would like to know how time spend in the dispatcher by a request coming back from an RFC is calculated.
When the RFC is made the user context is rolled out of the work process so the work process becomes free. When the RFC comes back it has to be assigned to a new work process. This means that a bit of time would need to be spent in the dispatcher. Would this time be measured as "wait" time or is it part of "Roll wait time?
From the definition you gave of "Roll wait time", "it is the time dedicated by the R/3 system to waiting for the return value of an RFC call plus the CPIC time required to create the connection for that RFC to an outside system", one would think that the time spent in the dispatcher by a returning RFC would be measured as "wait time" the same as when the dialog request first comes in from the front end. I've never seen a diagram that explained this satisfactorily.
Kind regards,
Peter

Relation between Integrated Planning and BPS

Dear all,
I am just considering about using the BI Integrated Planning. I have a few question about the relation between BW-BPS and BI Integrated Plannning.Can anybody tell me about the near future about these both two? Is the BI Integrated Planning going to replace the BW-BPS or are they going to co-exist instead? Do we have to use them both? Although I'm not used to the new features of BI Integrated Planning, I just quite don't get what is the advantage of using them besides ensuring the future development.
Best regards,
Takashi

Hi Matsumoto,
I have recently implemented both BW-BPS and IP on 2004S.
I have always started with trying to implement IP instead of BW-BPS because, as we all agree, it is the future. Another reason was personal: I wanted to learn IP.
Sometimes I however had to switch to BW-BPS because of following reasons:
- the front-ends are more advanced if the users have a SAPGUI installed. The Excel front-end of IP is more advanced compared to the Excel GUI version of BW-BPS. IP is based on workbooks (the same as BW workbooks). Workbooks have more flexibility than BW-BPS Excel GUI version. The problem is that you need the 2004S gui to use IP via workbooks. Installations of the 2004S gui is rather complex and is almost impossible to install remotely because there are so many components involved.
- the front-ends on the web do not require a SAPGUI and are more advanced in BW-BPS. In BW-BPS, you can use the office web components (Excel on the web) where you can copy past, etc. The IP web version is HTML based and does not yet support the office web component. You can use it for data entry of a limited number of data but is hard to use for large volumes.
- BW-BPS for now supports more hierarchy features than IP. Displaying hierarchies can be done on IP. If you want to do bottom-up or top-down planning, it is adviseable to develop on BW-BPS; Again, these features will in the future be supported by IP but are not yet.
- performance: saving is quite slow in IP compared to BW-BPS.
- timing: if you want to move fast, go for BW-BPS. There is a lot more documentation on forums, you will have a lot less problems etc.
By the way, Sean is 100% correct about the instability of IP. We had to implement a number of notes and had SAP to create new notes for problems we had.
Please assign points if this solved your problem.
Best Regards,
Filip

What is the difference between 'Shopping cart' and 'Team cart'

Hi,
   There a knowledge about 'Team Cart' in SRM 7.0 .I want to know what is the difference between 'Shopping cart' and 'Team cart'?
   Thank you !
   best Regards

Hi,
SRM self-service procurement and requisitioning process was generally focused on the requestor and goods recipient. SAP SRM 7.0 introduces the new 'team' approach.
Team purchasing enables users to:
Define their own procurement substitutes
Make shopping carts accessible to substitutes
Substitutes (team members) are able to:
Search for and take over team shopping carts
Create follow-on documents (such as confirmations) for team carts they have taken over
Regards,
Jason

Where can I find the relation between company code and plant?

where can I find the relation between company code and plant?
I need to the list of plants under a company code.
Which table?

yes,wayne weng .What you said is right.
Thank you very much!
My MSN:[email protected]

Relation between GL Account and Invoice?

Hi Experts,
I am working with the FI reports for the first time and I do not have any idea on FI functional flow. I have some basic questions like
What is the Relation between GL Account and Invoice?
When will an Invoice be posted into BKPF, BSEG, BSAD, BSID, BSAK and BSIK? Is there any field in these tables which gives the Invoice number against which a GL Account is created?
For example if I want to calculate " no of vendor invoices without PO how can I do that"? How can I know what are vendor invoices created against a PO or without PO?
Thanks for any help in advance and I am bound to reward points.
Sri

What is the Relation between GL Account and Invoice?
SAP's Glossary for GL Account is
"A structure that records value movements in a company code and represents the G/L account items in a chart of accounts.
A G/L account has transaction figures that record changes to the account during a posting period. These figures are totals that are used for G/L reporting."
In accountancy, an account is a label used for recording and reporting a quantity of almost anything. For example when a company pays salary to its staff, They debit Salary account. This is to identify what is the nature of an expense.
An invoice is a message to the buyer of goods or services that contains, among other things, Name of the goods or services, Quantity sent, & Remuneration due.
Invoice is also a SD document used to charge a customer for a delivery of goods or for services rendered.
When will an Invoice be posted into BKPF, BSEG, BSAD, BSID, BSAK and BSIK? Is there any field in these tables which gives the Invoice number against which a GL Account is created?
If it were a vendor invoice. (i.e you purchase items or service and recieve invoice)
Invoice get posted to the tables once someone makes a Logistics Invoice verification through t-code MIRO etc. The teble RBKP gets the first posting.
If it were your own invoice to your customers, then VBAK and VBAP get the posting. The connectivity of tables are available in http://www.erpgenie.com/abap/tables.htm As far as SAP is concerned an invoice is a document, so you can only trace invoice as a document number, field name is usually BELNR. Even if a vendor invoice arrive, an internal invoice number is generated where the vendor invoice is entered only as a reference field. This is because, each vendor can have inovices of different size and pattern.
How can I know what are vendor invoices created against a PO or without PO?
For a purchase order you can find in table EKBE for BEWTP = Q any invoice document.

Relation between MSEG table and movement types in 2lis_03_bf

Hi all,
May i know the relation between MSEG table and 2lis_03 _bf xtractor stock type/stockcategory where we see the informarion in r/3 side for this, you answers gets rewarded.
regards,
Dan.

Hi,
Most of the data for IM comes from the tables MSEG andd MKPF. You can go to MSEG contents and see the data there. You will find all the movement types, stock types and stock categories there. You can also use the transactions MB5B, MB51 etc.. to see the related info in R/3. As I said most of the data comes from these tables but not all the data. It uses some internal programming to get the data.
Hope it helps...

Need technically the linkage between Shopping Card and PO (SRM).....

Hi SAP Gurus,
I am using SAP SRM 7.0 and wanted to find out:
1) Technically the linkage between Shopping Card and PO (SRM). (Basically looking for required table names and the fields)
2) Technically the linkage between Shopping Card and Reservation (SRM) . (looking for required table names and the fields)
Thanks....

Hi Siobhan
thanks. but every customer wants to know what happened to his cart if the status is COMPLETED or not. Why SAP missed this small piece of functionality to show COMPLETED status via WEb transaction. I can see only this via REDISTRIBUTION WORKLOAD transcation status. right hand side green tick mark. this green mark totally mislead every body. mixuter of status shows green tick mark (COMPLETED + FOLLOW ON DOCUMENT CREATED etc) in redistribution mark.
Appreciate your reply .
I tell you in detail .
for ex CART went to ERROR IN PROCESS but no where the requestor can see his cart and he got dismayed and admin can see his cart . ok. if i go see in redistribution menu it shows COMPLETED logo. it mislead whole business.
Muthu

Relation between different GUID and tables in RPM

Hi All,
can you tell me the relation between different GUID and tables in RPM. Many thanks.
Regards,
J B

Hi Deepesh,
Try the foll. join :
    SELECT fragment_guid INTO (some internal Table)
         FROM comm_pr_frg_rod
         WHERE product_guid = (your product guid list)
This should give u a complete match of the products.
Hope this helps.
Regards,
Raviraj

Relation between Shop id and Internet User in CRM

Similar Messages

Maybe you are looking for