Relation between Version and Release Strategy at Purchase Order level

Our requirement is as follows:-
Case: "Document Type" + "Purchase Group"+ "Price-A" ==== Release Strategy "XX" , and it got release by approving authority "YY"
now, if i edit the vallue of above case to "Price-B", in such a case a new release strategy should trigger and it should go to approving authority "ZZ" in all the cases
Price-A can be equal to Price- B, Less than or greated than.
I come to know that, to acheive this we need to activate the version management, MM>>Purchassing>>Verion managemet>>for external document ( Here i have maintaned the veriosn for "F", and "Dcoument type" for "Purchase Org"
Now the issue is when i created the version with REVNO and CEKKO table, and when i maintain the version for the release strategy , system dont show the tab of release strategy in PO screen, means release strategy is not getting applied on the PO,
and when i delete the version condition, we can see the release strategy tab in the PO.
Thanks in advance,
Vikas Rander.

Our requirement is as follows:-
Case: "Document Type" + "Purchase Group"+ "Price-A" ==== Release Strategy "XX" , and it got release by approving authority "YY"
now, if i edit the vallue of above case to "Price-B", in such a case a new release strategy should trigger and it should go to approving authority "ZZ" in all the cases
Price-A can be equal to Price- B, Less than or greated than.
I come to know that, to acheive this we need to activate the version management, MM>>Purchassing>>Verion managemet>>for external document ( Here i have maintaned the veriosn for "F", and "Dcoument type" for "Purchase Org"
Now the issue is when i created the version with REVNO and CEKKO table, and when i maintain the version for the release strategy , system dont show the tab of release strategy in PO screen, means release strategy is not getting applied on the PO,
and when i delete the version condition, we can see the release strategy tab in the PO.
Thanks in advance,
Vikas Rander.

Similar Messages

  • Release Strategy in Purchase Order

    Hi,
    Can any explain the usage of Release Strategy in Purchase Order.
    ganesh

    Hi Ganesh,
    Release strategy works the same way in purchasing documents (i.e. PR and PO). It is a form of control that company use to control the purchases made.
    In your scenario, a PO release strategy is used to control the PO release status for Good Receipt process. Once the PR is released by the relevant releaser, you will see that the PR is now unblocked for issuance of PO.
    Once the PO is issued with reference to the PR, it is now blocked again by a release strategy for user to perform Goods Issue. The releaser will evaluate the PO issued and determine if it is necessary to be released for GR / Service Acceptance process. At this stage, the releaser can still reject the PO although issued, and hence GR / Service Acceptance is not able to be performed. Different value will trigger different set of release strategy with different level of approvals, depending on how the PO release strategy is configured by the MM functional consultant. Usually, the PO release strategy has a flatter approving level as compared to PR release strategy, reason being that once the PR has been fully released by all releaser and the PO issued, usually the purchase is deemed necessary and PO releaser would usually consider to release the PO for GR  or Service Acceptance process, unless there is discrepancy or sudden change in decision of Management.
    Hence, all in all, the PO release strategy act as another form of control to the company to restrict the release of PO for GR or Service Acceptance.
    Hope this will give u a better understanding on the function of a PO release strategy.
    Rgds.

  • Release strategy for Purchase order

    Hi Friends,
    My client was using Release strategy for purchase order. Now we want to know the T-code for showing list of Rejected Purchase orders,  T-code for for showing list of approved purchase orders, T-code for showing list of blocked purchase order.
    Thanks and regards
    Krishna

    HI,
    You can go to SE16N view table name EKKO
    FRGKE   Release ind.  = B 
    FRGZU   Release status = <blank> 
    mean, this PO yet to approve/ rejected.
    FRGKE   Release ind.  = R
    FRGZU   Release status = X
    means, this PO has been approved.
    Hope this helps

  • Release strategy of Purchase order

    Dear all,
       I configured Release strategy for purchase order in which i create characteristic,Class.
       I also define release procedure for PO like release group,release code,release indicator & release strategy.
       But it is not reflecting in Purchase order.
    Regards,
    Nitin Patil.

    Hi Nitin,.
    check had you missed any step while creating the release procedure...
    Follow the link it may be useful to you, this is for PR.... this is same for PO also onle differnce is in coummunicaitton structure CEKKO you neet put...
    http://www.sap123.com/showthread.php?t=59&highlight=SettingsimpleReleaseProcedurePurchase+Requisitions
    regards
    anand

  • Wrong Release strategy in purchase order

    Hi,
    I have a specific purchase order with wrong release strategy.
    I had been creating others documents with the same total value and the release strategy work correctly.
    The release strategy configuration are right.
    How I can correct the release strategy in a specific document?
    Thanks.
    Best Regards.

    Hi,
    The release strtegy is basically conssitss of Different type of characters.
    What characters you are highlighting plays in release strategy.
    First you comapre the characters you mentioned in two purchase orders,
    eg: p.org, Pur Grp, Value,------
    o to bith release strategies and compre the things or characters you mentioned Release strategy and found wher you missed to get the required Strategy.
    SPRO>>MM>>Purchase order>>Release Procedure for Purchase Orders>>Define Release Procedure for Purchase Orders>>Click on release strategies
    Select your release strategy and go to Classification , here you chck the parameters in both release strategies and compare with your purchase orders.
    Regards,
    Andra.

  • Link between GTM and FSCM (sales or purchase order hedging)

    Hi all,
    I am trying for a few days to have SAP GTM working (I am in an IDES ECC6 system, and as far as I know in EhP4 version). The main goal in fact is to test the currency hedging, and therefore to the link GTM and FSCM, either single-sided purchase or sales order, or two-sided . The flow I want is the following :
    -     I buy or sell a product, in GTM, through a trading contract which generates a purchase or sales order.
    -     Automatically a currency hedge is generated to cover the risk, in FSCM, I guess in exposure management.
    -     And then the financial products (derivatives) are generated as well.
    No problem to create the trading contract, no problem to generate the sales or purchase order. But in spite of the (very little) customizing I found in u201CSAP GTM => currency hedgesu201D, and some in FSCM, in u201Ctreasury and risk managementu201D, no way to have this link between GTM and FSCM, no additional document is generated like a Forward Exchange Transaction (I guess I should have this, and then a risk exposure in FSCM).
    Would you have an idea ? Is this customizing, or an additional Business Functions or Extension Set not activated ? SAP says : u201Cit worksu201D, but canu2019t find the way.
    Thank you very much for your help, I am quite looking for this link for a few days now u2026
    Best regards
    Patrick

    Yes Mr Ashish!
    As far as iam concern there is no link between Project & Customer Master, you have to link it with SALES order, I had check in XD03,XD01, the complete customer master, i didnt find any field in customer master which links with Project.
    I'll let you know if i find any links.
    Regards,
    ANSAR

  • BADI: Release strategy to Purchase Order

    Hello gurús,
    Do you know some enhancement or BADI that I can use to reset the release strategy in the purchase order?
    The transaction where I need this is ME22N.
    Thanks for your time and support.
    Regards,
    Sandra Palomo

    Hello Sandra
    Have you had a look at BAdI ME_PROCESS_REQ_CUST? Perhaps you find a method there which matches your requirements.
    Regards
      Uwe

  • Release Strategy in purchase order document type

    Hi Gurus..
    I'm tring to tweak the single RS in the system.
    I've set the charcteristic using table CEKKO field BSART, restriction 032, I've set two document types as the Characteristic Value (ZLOG - ZADM). Then I´ve set the class with this characteristic, Created Release Groups & linked to class , Created Release Codes, Release Indicator, and Set up strategies
    .. but  It doesn´t pick any release strategy.
    The funny thing is if I delete the document types values entered in CL20N it works for all doc typs, but if I set the docs types that it should take to pick the RS it doesn't work at all...
    Please advice..

    I´m not such a abapper but I guess there is not values taken to ekko, does it ring a bell?
                                            BUKRS                                       
                                            BSTYP                                       
                                            BSART                                       
                                            BSAKZ                                       
                                            LIFNR                                       
                                            SPRAS                                       
                                            EKORG                                       
                                            EKGRP                                       
                                            WAERS                                       
                                            BEDAT                                             00000000
                                            LLIEF                                       
                                            KUNNR                                       
                                            RESWK                                       
                                            LBLIF                                       
                                            INCO1                                       
                                            KTWRT                                             0.00
                                            LIFRE                                       
                                            WERKS                                       
                                            MATKL                                       
                                            LTSNR                                       
                                            USRC1                                       
                                            USRC2                                       
                                            USRN1                                             0000000000
                                            USRN2                                             0000000000
                                            GNETW                                             0.00
                                            SUBMI                                       
                                            MEMORY                                       
                                            KONNR                                       
                                            REVNO                                       
                                            PDUMMY                                       
                                            KDATB                                             00000000
                                            KDATE                                             00000000
                                            EBELN

  • Deputy on Release strategy of Purchase Order

    Hi,
    We had the following below release strategy to configure
    For value greater then 5000 the approvers will be
    At First Level  approver(User) A1 or his deputy (User) Approver A2
    At second level Approvers(User) will be A3 or his deputy  A4
    At third level Approver (User) will be A5 or his deputy  A6.
    Can we customize this type of PO release startegy. I had seen and found that we cannot have approvers as deputy in release startegy, correct me if I am wrong.
    I thought to configure in below way
    At First Level let the Approver Release code be X1
    At Second Level let the Approver Release code be X3
    At third Level let the Approver Release code be X5
    Assign these Release codes to the Approvers user id as well as to there deputy
    For e.g. if for first level the approver (user is ) A1 and its deputy (user) A2 then assign this Release code to both of them so that either of them can release the PO.
    Is there any other way to configure this scenario.
    Also one more thing the approver(User) A1 can also create the PO. So when he create the PO then the approver should not be he himself it should be new approvers that is
    At first Level approver(User) A7 or his deputy Approver A2
    At second level Approvers will be A3 or his deputy  A4
    At third level Approver will be A5 or his deputy  A6.
    Please suggest you valuable inputs on this.
    Thanks
    Shashi

    The scenario you have explained is possible with alternative release procedure where you can set the release prerequisit based on your reqs but the second scenario you have explained which required workflow functionality with org management than only you can have
    so if you are planning to use the workflow than use th user eixt M06E0005
    to identify the role and level.

  • Difference between version and release

    Hi all,
    can anybody tell me the difference between release and version of SAP. Where can i check whic version I am using and which release is it. whats the importance of release and version.
    When i goto utilities, and then version management i see SAP Rel 620, version 46C. CAn anyone pls give me some insight on this...Thanks a lot..waiting for reply...

    Hi,
    Version is specific to SAP System : For Eg: SAP R/3 4.6c, SAP ECC 6.0 etc...(Component Version)
    With in SAP System, You will have many Software Components: and each of them will have specific releases...
    For Eg: ECC 6.0 can have many softeare componets such as:
    IS-U : Utility compnent
    FICA : FI related compontns.
    SAP_APPL : ABAP compontns
    SAP_BASIS : BASIS components...
    Reward if useful
    Regards
    Shiva

  • Relation between Eban and Erev tables

    Hi,
       What is the Relation between Eban and Erev tables?
    Thanks and Regards,
    Parvatha Reddy

    Hi,
    if you have activated version management for purchase requisitions (spro - mm - purchasing - version mgmt - set up ver mgmt for PR), then if any changes are made to the fields as specified in the customizing, then an entry is made in EREV table. EBAN is the pur. reqn table.
    Hope it answers your query.
    Regards,
    Vivek

  • Set relation between list and document library?

    I have a requirement that I want to show pop up/ modal dialog when I click on list item column "upload/Edit" (in EditForm.aspx) . In Modal Dialog I have to show upload button and also existed items if any. Here the attachments will store into document
    library's folder .The list item ID should be the folder name in document library.
    How do I set relation between list and doc lib ?
    Appreciate if suggests any links.
    Thank you.

    Hi Saurav,
    pls check below
    What version of SharePoint 2010 "SP 2010 Foundation or SP 2010 Server" you need to have SP 2010 server and to have the "User Profile service application".
    How do you configure the "User Profile service application" did you add the "Social Tagging Database"
    Create, edit, or delete a User Profile service application (SharePoint Server 2010)" 
    http://technet.microsoft.com/en-us/library/ee721052.aspx
    When you access to "Application Management>Manage service applications>User Profile Service Application>Manage User Permissions" validate if the all authenticated users Group have the "use Social Features" checked.
    Also validate in Central Administration in Farm Features if you have social tags and notes activated.
    http://sharepoint.stackexchange.com/questions/17546/tagging-feature-not-working
    https://social.technet.microsoft.com/Forums/office/en-US/c11cda96-091b-4b96-91bc-ccd8000238f4/tags-and-notes-sharepoint-2010-not-visible?forum=sharepointadminprevious
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • In ME38 can we add Version Management , Release Strategy

    Hi,
    Is there any way to add Version Management and Release strategy in ME38.
    Thanks & Regards
    Sudhansu    

    Hello ,
    Please  check  the  settings
    Here  Activate (Tick) for  LPA  .
    please check and  revert  back.

  • Redetermine release strategy for purchasing requisitions

    Hi Guys,
    How can I redetermine the release strategy for purchasing requisions when changes on the costcenter (EBKN-KOSTL)  are done -
    I know that it will be redermined when I add the costcenter as charateristics in customizing for release strategy but thats not an option
    I also tried to add coding in userexit for changing the communication strategy (Include ZXM06U13) but this exit doesn't provide information of the document number and position (EBAN, EBKN ..) so I can't find out if changes have been made
    I spend several hours trying to find solutions for this issue but no working results so far ..
    I hope you can help me on that
    TIA
    Manuel

    Hi,
    Note that EBKN will have entries corresponding to a PR only when it is        
    saved or checked, so KOSTL will not have any values for a PR which is under              
    creation. You should always use fields from structure CEBAN while             
    creating characteristics for Requisition release procedure as it              
    contains most of the relevant data about a PR under creation/change.
    I would advice you to check the note 365604.
    Please also check the changeability indicator in the customizing:
    transaction OLME -> Purchase Requisitions -> Release Procedure -> Procedure with Classification -> Set Up Procedure with Classification -> Release indicator -> check the detail screen for settings.
    Please check additionally the possible values for your characteristic cost centre (transaction CT04).
    Regards,
    Edit

  • Relation between sapstartsrv and saphostexec

    I am trying to implement note 1826767 which says:
    Resolution
    Configure https for the sapstartsrv process. The necessary steps are described in the chapter 'Configuring HTTPS for the SAP Host Agent' in the SAP HANA Automated update guide.
    My question is what is the relation between sapstartsrv and saphostexec here, i.e. why configuring HTTPS  saphostexec is equivalent to configuring HTTPS for sapstartsrv?   sapstartsrv and saphostexec are 2 different executables.
    Thanks!

    Hi Christina,
    In newer versions of SAP, SAPHostExec
    saphostexec is an executable that runs under root (UNIX) or the Local System Account (Microsoft Windows). It controls all of the functions for which a special user of this type are required, such as the operating system collector saposcol and sapacosprep. It is connected to sapstartsrv in host mode using a local socket, which ensures quick and secure communication and is also started during the startup of the host.
    Refer SAP help Monitoring Hosts with SAPHostControl and saphostexec - Infrastructure of the SAP NetWeaver Management Agents - SAP Libra…
    When you check the status of saphostexec using the command
    /usr/sap/hostctrl/exe/saphostexec -status
    You will see below processes
    saphostexec running (pid = 4729)
    sapstartsrv running (pid = 4732)
    saposcol running (pid = 0)
    I guess the relation is clear for you.
    Hope this helps.
    Regards,
    Deepak Kori

Maybe you are looking for