Relationship b/w sga configuration and boot.ini in windows platforms
hi all,
i have doubt on sga configuration and boot.ini settings.
assume the following configuration's
1.Db is 10g r2.
2.OS is Windows server 2003 ,RAM is 8gb
3.SGA_max_size=4gb,SGA_atrget=4gb
1.For the above settings i must initialize the /3g /PAE in bott.ini file?
2. the boot.ini configuration is optional one?
3. what is criteria to set the /3g /PAE parameter in boot.ini and why?
4. what is advantage and disadvantage of boot.ini
please explain.
Thanks is advance..
Deepak_DBA wrote:
hi,
1.Db is 10g r2.
2.OS is Windows server 2003 ,RAM is 8gb
3.SGA_max_size=4gb,SGA_atrget=4gbfor this configuration no need to set /3g /PAE..
coz in Windows server 2003
When the physical RAM in the system exceeds 16 GB and the /3GB switch is used, the operating system will ignore the additional RAM until the /3GB switch is removed. This is because of the increased size of the kernel required to support more Page Table Entries. The assumption is made that the administrator would rather not lose the /3GB functionality silently and automatically; therefore, this requires the administrator to explicitly change this setting.
The /3GB switch allocates 3 GB of virtual address space to an application that uses IMAGE_FILE_LARGE_ADDRESS_AWARE in the process header. This switch allows applications to address 1 GB of additional virtual address space above 2 GB.
The virtual address space of processes and applications is still limited to 2 GB, unless the /3GB switch is used in the Boot.ini file. The following example shows how to add the /3GB parameter in the Boot.ini file to enable application memory tuning:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(2)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINNT="????" /3GB
so no need to se the bbot.ini files in your case..
Deepak,
Its not good to quote from a link and not give the entire link.
http://www.microsoft.com/whdc/system/platform/server/PAE/PAEmem.mspx
HTH
Aman....
Similar Messages
-
If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)
JDFitch wrote:
Ok Great,
Will installing Boot Camp drivers allow me to both read and write to the OS X Volume from windows?
This is important as if it will it means i can make the windows partition a lot smaller and keep all my files on the OS X partition which would be preferable.
Jon
No, OSX will be read only (from Windows) and vice versa. (you can install 3rd party utilities on either or both partitions, to make read/write possible) -
How to configure apache for ssl in windows platform
hi all,
can anyone help me expalin how to configure apache for ssl in windows platform.George,
I would take the following 'first steps'
1)Install Apache20 on your Windows machine following the Apache online documentation
http://httpd.apache.org/docs-2.0/misc/tutorials.html
2)Make sure you can 'serve up' static HTML content from your Apache Server
3)Install Weblogic Server per our online documentation
http://edocs.bea.com/wls/docs61/install/index.html
4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
directly from WLS server
5)Once you have both of the above 'sanity' checks attempt to configure a simple
proxy by ppath or mime type via our online documentation
http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
Chuck Nelson
DRE
BEA Technical Support -
Directory server and ldap TLS on windows platform
Any body, tested "sun directory server" and "ldap tls" on windows platform"??? cause I tried it, and I cant established a secure connection. On other platform, and I speack about solaris 9, evry thing is ok. Some comments??
It's a rather unusual way to use attribute subtypes. You may be able to do something with the mapping engine in DPS - I'll wait for Sylvain or someone else who knows DPS really well to answer that. But from the perspective of the information model, I have some doubts about this approach. For instance, what happens if you have multiple subtypes on a single-valued attribute?
Usually, for example, if there is a "preferred" common name as opposed to some other common names, it would be modeled in an entirely different attribute type, such as "preferredName". The subtypes are almost exclusively used for language specification nowadays. That's another question - what happens if you ever need to store multiple languages in your Directory?
Do you know of anyone else who is using this kind of information model in their Directory? -
How to configure and use StartTLS on Windows AD server (2008 R2 or 2012) ?
I would like to use port 389 with secure ldap using StartTLS, i.e ldap over TLS. I could not find documentation to configure and use ldap over tls using port 389 with the implementation of StartTLS command. Though I could find documentation on secure ldap
on port 636. Please help.Hello,
see about self-signed certificates in
http://support.microsoft.com/kb/321051/en-us and how to enable them in AD.
Please see if steps in
https://kb.meraki.com/knowledge_base/certificate-requirements-for-tls will help you.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
I have spent hours setting up a windows 7 computer with programs cad files and other software and I would like to log in to a windows 2003 server
without having to start over. Is there anyway to do that without losing anything?
ScottHello, I can't believe your the only one that answered my question.
What I have is 7 pc's that I bought in 2007 they are "HP M9077C" I am trying to
upgrade all of them the same way. I upgraded the memory to 8gb, replaced the
video cards to nvidia quadro k600 and installed windows 7 ultimate on all of them.
I then took just 1 of the computers and installed all of the software and changed the
settings to my preference which took hours to do. After I had the 1 computer
configured exactly the way that I wanted it I made a mirror image backup of it.
I then took that backup and restored it on the rest of the 6 computers that I have.
Now here comes the problem I need to be able to hook up the computers to my
windows 2003 small business server. When my IT guy did that he said that he had
to create a different user to connect to the file server when he did that my desktop
was empty and all of the settings are on the original user. Is there anyway to keep
the settings from the original user and connect to the file server so I don't have to
spend hours on each one of the computers. If there is a way to copy the original
user's settings that would be great. I also need to change the user name on each
computer. Please let me know.
Thanks Scott
-
How to drag and drop image between Windows platform and VM
Thanks.
Hi Deer2000,
There are several things you need to do first. You need a Transferable that can provide the image data in a format that the application likes. You will not be able to drop a serialized ImageIcon onto a native app for example. Most won't accept a binary stream even if you declare it's MIME type (e.g. image/jpeg) either.
You need to know what the native "clipboard" formats are. For example on Win32, DIB (device independent bitmap) and BITMAP are clipboard image formats. Learn the format and write an InputStream the can provide it. Then add your stream to a FlavorMap.
What is a FlavorMap and why do I need one?
Most native apps don't understand MIME types for data transfer. They have their own "clipboard" types. Java DataFlavors are based on MIME types. In order to provide a mapping between the win32 format TEXT and MIME types text/plain;charset=ascii you create a FlavorMap. Actually the default system flavormap does this type for you.
An easy way to add mappings is to edit $JDKHOME/jre/lib/flavormap.properties. For our custom image stream we've added the following entry:
DIB=image/x-win-bmp;class=com.rockhoppertech.dnd.datatransfer.BitmapInputStream
Other Win32 clipboard formats are:
WAVE
RIFF
PALETTE
ENHMETAFILE
METAFILEPICT
DIB
TIFF
Or please refer this URL, which gives a good idea about drag and drop in Java
http://www.rockhoppertech.com/java-drag-and-drop-faq.html
I hope this will help you.
Thanks
Bakrudeen -
Printer configuration for enterprise release 5.6.2 on windows platform.
Hi All,
Database configuration
=======================
XML publisher 5.6.2 installed on host "aranagir-pc1"
Then i configured scheduler and the database as:-
<url>jdbc:oracle:thin:@127.0.0.1:1521:XE</url>
I could run view the outut for the report Employee Salary Report but while
printing it gives me error.
PRINTER CONFIGURATION
=====================
Printer to be configured is "HydCampus-P1-2FL-1" which has the IP address as 10.176.112.99
and port as 515.
I wwas able to browser using url
http://10.176.112.99, so its a ipp enabled printer.
My server name :- HydCampus-P1-2FL-1
Host :- 10.176.112.99
port:- 515
uri:- ipp://10.176.112.99:515/
Help me to configure printer(ipp) on the windows platform and guide me how to define
printer configuration parameter.
But it is failling with the error as
[101906_091928332][][EXCEPTION] oracle.apps.xdo.servlet.scheduler.ProcessingExce
ption: oracle.xdo.server.delivery.DeliveryException: oracle.apps.xdo.delivery.De
liveryException: Software caused connection abort: socket write error
at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:1034)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:317)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:520)
Caused by: oracle.xdo.server.delivery.DeliveryException: oracle.apps.xdo.deliver
y.DeliveryException: Software caused connection abort: socket write error
at oracle.xdo.server.delivery.impl.DeliveryServiceImpl.deliverToPrinter(
DeliveryServiceImpl.java:349)
at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:910)
... 3 more
Caused by: oracle.apps.xdo.delivery.DeliveryException: Software caused connectio
n abort: socket write error
at oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler.submitRequest(
IPPDeliveryRequestHandler.java:476)
at oracle.apps.xdo.delivery.AbstractDeliveryRequest.submit(AbstractDeliv
eryRequest.java:1267)
at oracle.xdo.server.delivery.impl.DeliveryServiceImpl.deliverToPrinter(
DeliveryServiceImpl.java:343)
... 4 more
Caused by: java.net.SocketException: Software caused connection abort: socket wr
ite error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at oracle.apps.xdo.delivery.ipp.IPPMessageHandler.writeAsciiValue(IPPMes
sageHandler.java:721)
at oracle.apps.xdo.delivery.ipp.IPPMessageHandler.writeAttribute(IPPMess
ageHandler.java:657)
at oracle.apps.xdo.delivery.ipp.IPPMessageHandler.writeMessage(IPPMessag
eHandler.java:821)
at oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler.submitRequest(
IPPDeliveryRequestHandler.java:342)
... 6 more
Regards,
Ajay
Message was edited by:
user501772Hi All,
Database configuration
=======================
XML publisher 5.6.2 installed on host "aranagir-pc1"
Then i configured scheduler and the database as:-
<url>jdbc:oracle:thin:@127.0.0.1:1521:XE</url>
I could run view the outut for the report Employee Salary Report but while
printing it gives me error.
PRINTER CONFIGURATION
=====================
Printer to be configured is "HydCampus-P1-2FL-1" which has the IP address as 10.176.112.99
and port as 515.
I wwas able to browser using url
http://10.176.112.99, so its a ipp enabled printer.
My server name :- HydCampus-P1-2FL-1
Host :- 10.176.112.99
port:- 515
uri:- ipp://10.176.112.99:515/
Help me to configure printer(ipp) on the windows platform and guide me how to define
printer configuration parameter.
But it is failling with the error as
[101906_091928332][][EXCEPTION] oracle.apps.xdo.servlet.scheduler.ProcessingExce
ption: oracle.xdo.server.delivery.DeliveryException: oracle.apps.xdo.delivery.De
liveryException: Software caused connection abort: socket write error
at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:1034)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:317)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:520)
Caused by: oracle.xdo.server.delivery.DeliveryException: oracle.apps.xdo.deliver
y.DeliveryException: Software caused connection abort: socket write error
at oracle.xdo.server.delivery.impl.DeliveryServiceImpl.deliverToPrinter(
DeliveryServiceImpl.java:349)
at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:910)
... 3 more
Caused by: oracle.apps.xdo.delivery.DeliveryException: Software caused connectio
n abort: socket write error
at oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler.submitRequest(
IPPDeliveryRequestHandler.java:476)
at oracle.apps.xdo.delivery.AbstractDeliveryRequest.submit(AbstractDeliv
eryRequest.java:1267)
at oracle.xdo.server.delivery.impl.DeliveryServiceImpl.deliverToPrinter(
DeliveryServiceImpl.java:343)
... 4 more
Caused by: java.net.SocketException: Software caused connection abort: socket wr
ite error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at oracle.apps.xdo.delivery.ipp.IPPMessageHandler.writeAsciiValue(IPPMes
sageHandler.java:721)
at oracle.apps.xdo.delivery.ipp.IPPMessageHandler.writeAttribute(IPPMess
ageHandler.java:657)
at oracle.apps.xdo.delivery.ipp.IPPMessageHandler.writeMessage(IPPMessag
eHandler.java:821)
at oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler.submitRequest(
IPPDeliveryRequestHandler.java:342)
... 6 more
Regards,
Ajay
Message was edited by:
user501772 -
Boot.ini configuration for a 3 partition drive
So i wanted to create a 3rd FAT32 partition to share files between my windows XP and and OSX lion partitions. I havent been able boot windows XP im sure the issue is with the boot.ini configuation. before any changes were made this was my configuration
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(4)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(4)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
i have tried changing the 4s to 5s and several other combinations to no avail.The issue is that once you create the third partition you have wiped the boot loader installed by Boot Camp Assistant. If you read the Boot Camp documentation you would have learned that you can only have two partitions - OS X and Boot Camp's.
You have only two alternatives at this point:
Repartition your entire drive to return it to one volume. Reinstall OS X then create a new Boot Camp partition and install Windows.
Try using the third-party boot loader - rEFIt. You may then be able to keep the third-partition along with your OS X and Windows volumes.
Just keep in mind that you no longer can use Boot Camp Assistant to manage what you now have configured. -
Dual Boot 32 and 64 Bit Xp Pro - boot.ini changes
Well I am up and running both 32 Bit and 64 Bit XP Pro and initially 64 Bit has a few lags up on me. System is as follows
MSI K8N Neo4 Plat with AMD Athlon 64 3000, 2 X Corsair 512-3200C2PT (1GB RAM), Western Digital WD2500JD Caviar SE, WD360 Raptor, WD2500BB Caviar, Seagate ST3300831A, Plextor 712A & 716A, Samsung 816A, ATI X600 All-in-Wonder with 256MB RAM, Sound Blaster Audigy 2 ZS.
I used the 32bit drivers provided on a disk and for 64 Bit I was able to get ATI, nVidia, and that is all. Bot 32bit and 64 bit are working well. On several occasions more often than not. i have to edit the boot.ini to add back in the 64 bit option. Why? I can not link the deletion to anything specific. Now if it is supposed to delete to option that woul dbe a new one.
Any thoughts?Did you write the initial boot.ini file or is it one that Windows automatically wrote for you? Are the two OS's on the same HDD or on different HDD's? Which OS did you install last?
The Windows written boot.ini has always worked fine for me. If you installed Win 64 first and then Win 32, that could cause problems. -
Advanced Configuration and Power Interface - Slow boot on Neo2 Platinum
Hi,
Recently I bought myself a Neo2 Platinum mainboard but in WinXP I got some stuttering problems while playing music in winamp. I remembered from my last Nforce2 mainboard that changing the WinXP HAL from 'ACPI Uniprocessor' toAdvanced Configuration and Power Interface' fixes this problem.
But when I try to do this it result in WinXP booting really slow (more than 10 minutes at least). Also a clean install of WinXP where I set the HAL manually during the installation gives the same problem after installing the nforce drivers.
Anyone else had this problem?
MSI Neo2 Platinum
Amd Athlon64 3000+
2* 512MB Corsair ValueSelect
Leadtek GeForce 6600GT
Seagate 120GB
OCZ Modstream 450W
WinXPI also have the same problem.
I have a hardware independant image that i have built in MS VPC / MS VS05 which is then sysprep'd and captured into a WIM file.
Before i built my base image in the virtual environment, i configured all the automation files used to install windows, to include the latest Intel Matrix drivers v8.5, including the sysprep files in the base image.
I have a custom WinPE v2.1 that the machine boots of the network, and runs a vbscript in the background to partition the disks, and map drives to the network, it then extracts the WIM file to the hard disk, and copies the required drivers from the network share for the model being imaged, and then proceeds to updating the sysprep.inf.
One of the process's that is performed is checking what HAL to write into the sysprep file.
I have forced all the different types of HAL's by hard coding them in the sysprep, but after the machine reboots i get the black screen of nothing and no hard disk activity, if i reboot into safe mode it freezes on agpCPQ.sys.
I use this build process to support around 5,000 different machines at two different companies, there is proberly about 30 different models of machines that are supported by this image, (HP, Acer, Toshiba, IBM, Lenovo)and i only have the issue with the new Lenovo x301, T400 & T500.
I have spoken with Lenovo Australia, and dealt directly with the advanced system engineers and even forwarded them a copy of my image for testing, so far they have not been able to provide a solution.
They also sent me a copy of the restore disks for those models and windows xp installed without an issue, but the difference is that their image does a fully automated install where as my image is a sysprep'd image.
I checked the machines HAL type after it was imaged, and it is the same as the HAL used inside my VM Image. -
ARC path (boot.ini) for SATA on Promise contr. (KT6d)
Hi!
I've recently purchased and installed my first SATA disk, connected to my Promise SATA/RAID controller on my K6 delta motherboard. It is a ghosted duplicate of my old system disk, and now I struggle with the boot.ini file, which still addresses my old disk for boot of Windows XP, in stead of my new one.
The boot.ini files reads:
[boot loader]
timeout=30
default=scsi(2)disk(0)rdisk(0)partition(2)\WINDOWS
[operating systems]
multi(0)disk(1)rdisk(0)partition(1)\WINDOWS="Windows XP Professional" /fastdetect
scsi(2)disk(0)rdisk(0)partition(1)\WINNT="NEW Windows XP Professional" /fastdetect
The first OS line (multi....) is my old disk, which I have kept for backup purposes. The second line is supposed to be my new SATA disk on the first of the two slots on my Promise integrated SATA RAID controller. Problem is, this disk is not found by Windows XP during boot. I have tried the two following configurations for the ARC path:
scsi(2)disk(0)rdisk(0)partition(1)
scsi(0)disk(0)rdisk(0)partition(1)
Both without luck. Anyone got any idea how to modify boot.ini to make it boot of my disk (which is the first and only SATA disk on my Promise controller)? The BIOS seems to indicate that the SCSI controller is marked as "2", thus the "scsi(2)" line, but even with "scsi(0)" it fails.
PS: If I boot using my old disk, the new SATA disk pops up, so the disk and controller is fine, and there is only one partition on the disk.
PPS: The actual error message is as follows:
Windows could not start because of a computer disk hardware configuration problem.
Could not read from the selected boot disk. Check boot path and disk hardware.
Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information.Thanks for the tip (and the links) - didn't know the Via controller was better, I'll switch
But, using the VIA controller, it wil still be detected as a SCSI disk, right? In which case I'll still need to know the "ARC path" (on the format scsi(x)disk(y) etc.) for my boot.ini. I guess I could just try the most likely combinations, but if anyone knows which ARC path to use for the VIA or Promise I'd be much obliged
I can still use my VIA SATA even though I am still having regular IDE devices on all my EIDE ports, right? (Meaning, there is no conflict where I have to choose either ATA/IDEA or SATA for my VIA controller, thus rendering one of my EIDE disks unconnected if I enable the SATA?) -
Hello,
Sorry for the repost, but I realized after the edit period had passed that I left out a lot of information from my original post, and that I misrepresented my problem in the question heading. Because of this, I am posting again with the updated information.
I am using a 21.5" iMac from Late 2009 with OSX Mavericks 10.9.2. Recently, I have been experiencing several signs of failure/aging during use:
Frequent:
Mail.app slow opening, closing; messages opened in large batches do not get marked as read
Terminal.app experiences noticeable lag when opening (it sometimes takes between 5 and 20 seconds between launching the application and getting an active prompt)
Processes lag or become unresponsive, even when not many applications are running
Browswers frequently become unresponsive, pinwheel, or lag considerably, frequently requiring a force-quit.
Mouse Pinwheels Frequently
Intermittent
Computer generates loudly audible fan noises, persists even when computer is briefly powered off during a reboot; does not always stop after rebooting
Finder often becomes unresponsive
Rare (one time only)
Machine powered on in "Safe Boot" mode for no apparant reason; red text reading "Safe Boot" in menu bar of login screen; background picture slideshow mode became very glitchy, phased and flashed in horizontal grey bars before loading next background image
Chronic (Consistently Happens)
Machine will not boot if plugged into normal powerpoint after being unplugged from that power-point; cable must be plugged into a different A/C power outlet for machine to boot, at which point it can be switched off again, moved back to the original dedicated outlet, and booted again. This has never failed to happen, and is mind-boggling.
I followed some instructions from a similar thread, but I felt that my experiences were sufficiently different that I couldn't troubleshoot from someone else's solution. I would greatly appreciate any technical advice and help that the community can offer.
Specs (Obtained Using EtreCheck) :
Hardware Information:
iMac (21.5-inch, Late 2009)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
ATI Radeon HD 4670 - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 1:3:20
Disk Information:
Hitachi HDE721010SLA330 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (114.68 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
PIONEER DVD-RW DVRTS09
USB Information:
Western Digital My Book 1130 2 TB
VM (disk2s1) /Volumes/VM: 2 TB (757.31 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
WD My Book 111D 800mbit - 800mbit max
disk1s1 (disk1s1) <not mounted>: 32 KB
BigD (disk1s3) /Volumes/BigD: 2 TB (134.4 GB free)
Thunderbolt Information:
Configuration files:
/etc/hosts - Count: 3
Kernel Extensions:
org.virtualbox.kext.VBoxDrv (4.2.14)
org.virtualbox.kext.VBoxUSB (4.2.14)
Startup Items:
HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
rEFItBlesser: Path: /Library/StartupItems/rEFItBlesser
VirtualBox: Path: /Library/StartupItems/VirtualBox
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.github.GitHub.GHInstallCLI.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.ubuntu.one.fsevents.plist 3rd-Party support link
[System] org.freedesktop.dbus-system.plist 3rd-Party support link
[System] org.macosforge.xquartz.privileged_startx.plist 3rd-Party support link
[System] org.macports.rsyncd.plist 3rd-Party support link
Launch Agents:
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.hp.help.tocgenerator.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.wacom.pentablet.plist 3rd-Party support link
[System] org.freedesktop.dbus-session.plist 3rd-Party support link
[System] org.macosforge.xquartz.startx.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.google.Chrome.framework.plist 3rd-Party support link
[not loaded] com.valvesoftware.steamclean.plist 3rd-Party support link
[not loaded] org.virtualbox.vboxwebsrv.plist 3rd-Party support link
User Login Items:
Flux
Quicksilver
iTunesHelper
Air Mouse Server
Launch_IKCP
usb16
Music Manager
SpeechSynthesisServer
VMware Fusion Start Menu
Android File Transfer Agent
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
o1dbrowserplugin: Version: 5.1.5.17733 3rd-Party support link
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 3rd-Party support link
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
googletalkbrowserplugin: Version: 5.1.5.17733 3rd-Party support link
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
RealPlayer Plugin: Version: Unknown
Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
MusicManager 3rd-Party support link
TeXDistPrefPane 3rd-Party support link
PenTablet 3rd-Party support link
DWXBoxHIDPrefsPane 3rd-Party support link
Old Applications:
None
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 823.91 GB
Destinations:
BigD [Local] (Last used)
Total size: 2
Total number of backups: 89
Oldest backup: 2013-02-19 05:21:21 +0000
Last backup: 2014-02-27 02:52:20 +0000
Size of backup disk: Too small
Backup size 2 < (Disk used 823.91 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
47% firefox
3% WindowServer
1% EtreCheck
0% com.ubuntu.one.fsevents
0% mds
Top Processes by Memory:
489 MB firefox
147 MB com.apple.IconServicesAgent
66 MB Dock
53 MB WindowServer
41 MB Finder
Virtual Memory Information:
1.72 GB Free RAM
1.42 GB Active RAM
335 MB Inactive RAM
535 MB Wired RAM
683 MB Page-ins
564 KB Page-outs
Results of Linc Davis's diagnostic test from the similar thread:
Boot Mode: Normal
System diagnostics:
com.ubuntu.one.fsevents 2014-02-25-210509 crash
com.ubuntu.one.fsevents 2014-02-25-210520 crash
com.ubuntu.one.fsevents 2014-02-25-210531 crash
com.ubuntu.one.fsevents 2014-02-25-210541 crash
com.ubuntu.one.fsevents 2014-02-25-210553 crash
com.ubuntu.one.fsevents 2014-02-25-210603 crash
com.ubuntu.one.fsevents 2014-02-25-210618 crash
com.ubuntu.one.fsevents 2014-02-25-210640-1 crash
com.ubuntu.one.fsevents 2014-02-25-210640 crash
diskarbitrationd,HPIO Trap Monitor,mds 2014-02-07-223647 shutdownStall
Kernel messages:
Feb 23 20:52:38 Previous Shutdown Cause: -128
Feb 23 21:06:01 PM notification timeout (pid 364, MusicManagerHelp)
Feb 23 21:44:13 Sound assertion - 1002:aa30 FIFO error (Stream 0)
Feb 23 21:57:33 PM notification timeout (pid 364, MusicManagerHelp)
Feb 26 20:29:58 Previous Shutdown Cause: -128
Feb 26 20:44:56 PM notification timeout (pid 436, MusicManagerHelp)
Loaded extrinsic kernel extensions:
org.virtualbox.kext.VBoxDrv (4.2.14)
org.virtualbox.kext.VBoxUSB (4.2.14)
Extrinsic system jobs:
org.macosforge.xquartz.privileged_startx
com.ubuntu.one.fsevents
com.oracle.java.Helper-Tool
com.google.keystone.daemon
com.github.GitHub.GHInstallCLI
com.adobe.fpsaud
Extrinsic agents:
org.macosforge.xquartz.startx
com.wacom.pentablet
com.oracle.java.Java-Updater
com.hp.help.tocgenerator
com.google.keystone.system.agent
com.valvesoftware.steamclean
com.google.Chrome.framework.service_process/Users/XXXXX/Library/Application_Sup port/Google/Chrome
/Library/LaunchAgents:
/Library/LaunchAgents/com.google.keystone.agent.plist
/Library/LaunchAgents/com.hp.help.tocgenerator.plist
/Library/LaunchAgents/com.wacom.pentablet.plist
/Library/LaunchAgents/org.macosforge.xquartz.startx.plist
/Library/LaunchDaemons:
/Library/LaunchDaemons/com.adobe.fpsaud.plist
/Library/LaunchDaemons/com.github.GitHub.GHInstallCLI.plist
/Library/LaunchDaemons/com.google.keystone.daemon.plist
/Library/LaunchDaemons/com.ubuntu.one.fsevents.plist
/Library/LaunchDaemons/org.macosforge.xquartz.privileged_startx.plist
/Library/PrivilegedHelperTools:
/Library/PrivilegedHelperTools/com.github.GitHub.GHInstallCLI
/Library/PrivilegedHelperTools/com.ubuntu.one.fsevents
/Library/StartupItems:
/Library/StartupItems/HP Trap Monitor/HP Trap Monitor
/Library/StartupItems/HP Trap Monitor/Resources/English.lproj/Localizable.strings
/Library/StartupItems/HP Trap Monitor/StartupParameters.plist
/Library/StartupItems/rEFItBlesser/rEFItBlesser
/Library/StartupItems/VirtualBox/Resources/English.lproj/Localizable.strings
/Library/StartupItems/VirtualBox/VirtualBox
Library/LaunchAgents:
Library/LaunchAgents/com.apple.FolderActions.enabled.plist
Library/LaunchAgents/com.apple.FolderActions.folders.plist
Library/LaunchAgents/com.google.Chrome.framework.plist
Library/LaunchAgents/com.valvesoftware.steamclean.plist
Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist
Extrinsic loadable bundles:
/System/Library/Extensions/DWXboxHIDDriver.kext
(org.walisser.driver.DWXBoxHIDDriver)
/System/Library/Extensions/Pen Tablet.kext
(com.wacom.kext.pentablet)
/System/Library/Extensions/TabletDriverCFPlugin.bundle
(No bundle ID)
/Library/Audio/MIDI Drivers/EmagicUSBMIDIDriver.plugin
(info.emagic.driver.unitor)
/Library/Extensions/VBoxDrv.kext
(org.virtualbox.kext.VBoxDrv)
/Library/Extensions/VBoxNetAdp.kext
(org.virtualbox.kext.VBoxNetAdp)
/Library/Extensions/VBoxNetFlt.kext
(org.virtualbox.kext.VBoxNetFlt)
/Library/Extensions/VBoxUSB.kext
(org.virtualbox.kext.VBoxUSB)
/Library/Internet Plug-Ins/Flash Player.plugin
(com.macromedia.Flash Player.plugin)
/Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
(com.google.googletalkbrowserplugin)
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
(com.oracle.java.JavaAppletPlugin)
/Library/Internet Plug-Ins/npgtpo3dautoplugin.plugin
(com.google.o3d)
/Library/Internet Plug-Ins/o1dbrowserplugin.plugin
(com.google.o1dbrowserplugin)
/Library/Internet Plug-Ins/WacomNetscape.plugin
(com.wacom.tabletplugin)
/Library/Internet Plug-Ins/WacomTabletPlugin.plugin
(com.WacomTabletPluginLib.WacomTabletPlugin)
/Library/PreferencePanes/Flash Player.prefPane
(com.adobe.flashplayerpreferences)
/Library/PreferencePanes/JavaControlPanel.prefPane
(com.oracle.java.JavaControlPanel)
/Library/PreferencePanes/PenTablet.prefPane
(com.wacom.PenTabletSettingsPrefPane)
/Library/PreferencePanes/TeXDistPrefPane.prefPane
(comp.text.tex.distribution.preference)
/Library/PreferencePanes/XboxHIDPrefsPane.prefPane
(org.walisser.XBoxHIDDriver)
/Library/QuickTime/FLV.component
(com.macromedia.FLVExporter)
Library/Address Book Plug-Ins/SkypeABDialer.bundle
(com.skype.skypeabdialer)
Library/Address Book Plug-Ins/SkypeABSMS.bundle
(com.skype.skypeabsms)
Library/Internet Plug-Ins/doubleTwistWebPlugin.bundle
(com.doubleTwist.webPlugin)
Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
(com.Google.GoogleEarthPlugin.plugin)
Library/Mail/V2/[email protected]/Sent Messages (XXXXXX).mbox/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/Data/X/X/Attachments/XXXXX/X /XXXXXXXXXXXXX.pages
(No bundle ID)
Library/Mail/V2/[email protected]/Sent Messages (XXXXXX).mbox/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/Data/X/X/Attachments/XXXXX/X /XXXXXXXXXXXXXX.pages
(No bundle ID)
Library/Mail/V2/[email protected]/Sent Messages (XXXXXX).mbox/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/Data/X/X/Attachments/XXXXX/X .X/XXXXXXXXXXXXXX.pages
(No bundle ID)
Library/Mail/V2/[email protected]/Sent Messages (XXXXXX).mbox/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/Data/X/X/Attachments/XXXXX/X /XXXXXXXXXXXXX.pages
(No bundle ID)
Library/Mail/V2/[email protected]/Sent Messages (XXXXXX).mbox/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/Data/X/X/Attachments/XXXXX/X .X/iReceiver.app
(com.yourcompany.iReceiver)
Library/PreferencePanes/MusicManager.prefPane
(com.google.musicmanager.pref)
Library/Services/Attach to Email.workflow
(No bundle ID)
Unsigned shared libraries:
/usr/lib/libgcc_s.10.5.dylib
hosts:
205.228.34.175 uat.rvionline.com
205.228.34.176 www.rvionline.com
127.0.0.1 *********.blogspot.com
Global login items:
/Applications/Epson Software/Epson Low Ink Reminder.app/Contents/EpsonLowInkReminderAgent.app
Font problems: 8
Bad plists:
Library/Preferences/com.apple.iphotomosaic.plist
Keychains files: 10
Elapsed time (s): 2736Kam. wrote:
1: If I hold down option key with my USB plugged in to see my hard drives so I can boot into Windows, boot camp is not there. It does not show up on my Start Up Disk in my Mac, either. Though, I do see it in Finder with nothing in it (I can put stuff into it).
This indicates that your Bootcamp partition is still FAT, which also indicates that the Windows Installer has not been used to reformat it to NTFS yet, as required by Windows Installer. No Windows installation exists yet.
2: If I don't hold down option key with my USB plugged in, it gives me a black screen saying "Non-system disk, press any key to reboot". My keyboard is unresponsive. I have to hard shut down my computer.
The NVRAM in the Mac (as set by Bootcamp Assistant) is telling it to boot from the built-in Optical drive. Is it fully functional and has Windows Installer media in it or broken? Since no drivers have been loaded, the Keyboard/Mouse which are BT/USB, will not function.
From iMac (21.5-inch, Late 2009) - Technical Specifications, it has a built-in Optical drive...
Optical drive
Slot-loading 8x SuperDrive (DVD±R DL/DVD±RW/CD-RW)
Writes DVD+R DL and DVD-R DL discs at up to 4x speed
Writes DVD-R and DVD+R discs at up to 8x speed
Writes DVD-RW discs at up to 6x speed and DVD+RW discs at up to 8x speed
Reads DVDs at up to 8x speed
Writes CD-R discs at up to 24x speed
Writes CD-RW discs at up to 16x speed
Reads CDs at up to 24x speed
3: If I don't hold down option key and it is without my USB plugged in, it gives me a black screen saying "No bootable device -- insert boot disk and press any key". My keyboard is, again, unresponsive. I have to hard shut down my computer.
No bootable media in Optical drive, hence this error. -
Hi,
SharePoint 2010 Backup has been taken from production and restored through Semantic Tool in one of the server.The wepapplication of which the backup was taken is working fine.
But the problem is that the SharePoint is not working correctly.We cannot create any new webapplication ,cannot navigate to the ServiceApplications.aspx page it shows error.Even the Search and UserProfile Services of the existing Web Application is not working.Checking
the SharePoint Logs I found out the below exception
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4) 0x2D24 SharePoint Foundation Database
8u1d High Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4) 0x2D24 SharePoint Foundation Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4) 0x12AC SharePoint Foundation Database
8u1d High Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4) 0x12AC SharePoint Foundation Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:55.54 mssearch.exe (0x0864) 0x2B24 SharePoint Server Search Propagation Manager
fo2s Medium [3b3-c-0 An] aborting all propagation tasks and propagation-owned transactions after waiting 300 seconds (0 indexes) [indexpropagator.cxx:1607] d:\office\source\search\native\ytrip\tripoli\propagation\indexpropagator.cxx
11/30/2011 12:14:55.99 OWSTIMER.EXE (0x1DF4) 0x1994 SharePoint Foundation Topology
75dz High The SPPersistedObject with
Name User Profile Service Application, Id 9577a6aa-33ec-498e-b198-56651b53bf27, Parent 13e1ef7d-40c2-4bcb-906c-a080866ca9bd failed to initialize with the following error: System.SystemException: The trust relationship between the primary domain and the trusted
domain failed. at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids, Boolean& someFailed) at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection
sourceSids, Type targetType, Boolean forceSuccess) at System.Security.Principal.SecurityIdentifier.Translate(Type targetType) at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()
at Microsoft.SharePoint.Administration.SPAcl`1.Add(String princip...
11/30/2011 12:14:55.99* OWSTIMER.EXE (0x1DF4) 0x1994 SharePoint Foundation Topology
75dz High ...alName, String displayName, Byte[] securityIdentifier, T grantRightsMask, T denyRightsMask) at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization() at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization() at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider
persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4) 0x1994 SharePoint Foundation Topology
8xqx High Exception in RefreshCache. Exception message :The trust relationship between the primary domain and the trusted domain failed.
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4) 0x1994 SharePoint Foundation Timer
2n2p Monitorable The following error occured while trying to initialize the timer: System.SystemException: The trust relationship between the primary domain and the trusted domain failed. at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection
sourceSids, Boolean& someFailed) at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess) at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType) at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName() at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, Byte[] securityIdentifier, T grantRightsMask,
T denyRightsMask) at Microsoft.SharePoint.Administrati...
11/30/2011 12:14:56.00* OWSTIMER.EXE (0x1DF4) 0x1994 SharePoint Foundation Timer
2n2p Monitorable ...on.SPAcl`1..ctor(String persistedAcl) at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization() at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()
at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid
id, Guid parentId, Guid type, String name, SPObjectStatus status, Byte[] versionBuffer, String xml) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(SqlDataReader dr) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.RefreshCache(Int64
currentVe...
Please guide me on the above issue ,this will be of great help
Thanks.I have same error. Verified for trust , ports , cleaned up cache.. nothing has helped.
The problem is caused by User profile Synch Service:
UserProfileProperty_WCFLogging :: ProfilePropertyService.GetProfileProperties Exception: System.SystemException:
The trust relationship between the primary domain and the trusted domain failed. at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids,
Boolean& someFailed) at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess) at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType) at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName() at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, SPIdentifierType identifierType, Byte[]
identifier, T grantRightsMask, T denyRigh...
08/23/2014 13:00:20.96* w3wp.exe (0x2204)
0x293C SharePoint Portal Server User Profiles
eh0u Unexpected ...tsMask) at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.Office.Server.Administration.UserProfileApplication.get_SerializedAdministratorAcl() at Microsoft.Office.Server.Administration.UserProfileApplication.GetProperties() at Microsoft.Office.Server.UserProfiles.ProfilePropertyService.GetProfileProperties()
Please let me know if you any solution found for this?
Regards,
Kunal -
Error configuring and starting Managed Server in WebLogic 10.3
Hi,
I am able to configure and start the Managed Server on windows environment. I am trying to configure Managed Server on linux environment. I am configuring the Managed Server with custom keystore. When I configured the Managed Server I specified the keystore/trustsote information in the Keystores tab of the Admin Console for Managed Server settings. Specified Private Key Alias, Password in SSL tab.But when I am starting the Managed Server from command line, I see the process looking for demo trust files and failing.
Here is the command I run to start the Managed Server:
./startManagedWebLogic.sh MyManagedServer1 https://localhost.localdomain:8443
Below is the console output:
<Mar 11, 2015 12:37:44 PM PDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.45-b01 from Sun Microsystems Inc.>
<Mar 11, 2015 12:37:45 PM PDT> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:beaadmin
Enter password to boot WebLogic server:
<Mar 11, 2015 12:37:53 PM PDT> <Info> <Security> <BEA-090908> <Using default WebLogic SSL Hostname Verifier implementation.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/wlserver_10.3/server/lib/DemoTrust.jks.>
<Mar 11, 2015 12:37:53 PM PDT> <Error> <Security> <BEA-090132> <Could not open the keystore file /opt/wlserver_10.3/server/lib/DemoTrust.jks for read access. Exception: java.io.FileNotFoundException: /opt/wlserver_10.3/server/lib/DemoTrust.jks (No such file or directory)>
<Mar 11, 2015 12:37:53 PM PDT> <Warning> <Security> <BEA-090164> <Failed to load trusted certificates from keystore /opt/wlserver_10.3/server/lib/DemoTrust.jks of type jks>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/jre1.6.0_45/lib/security/cacerts.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:55 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:55 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:55 PM PDT> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at https://localhost.localdomain:8443.>
<Mar 11, 2015 12:37:55 PM PDT> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Mar 11, 2015 12:37:55 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Mar 11, 2015 12:37:55 PM PDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Mar 11, 2015 12:37:55 PM PDT> <Notice> <LoggingService> <BEA-320400> <The log file /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Mar 11, 2015 12:37:55 PM PDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log00015. Log messages will continue to be logged in /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log.>
<Mar 11, 2015 12:37:55 PM PDT> <Notice> <Log Management> <BEA-170019> <The server log file /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log is opened. All server side log events will be written to this file.>
<Mar 11, 2015 12:37:56 PM PDT> <Error> <Security> <BEA-000000> <[Security:090837]The configured keystore location for the PKI Credential Mapper is either null or empty.>
<Mar 11, 2015 12:37:56 PM PDT> <Error> <Security> <BEA-000000> <[Security:090815]The password provided for the keystore configured for the PKICredential Mapper was null.>
<Mar 11, 2015 12:37:57 PM PDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Mar 11, 2015 12:37:57 PM PDT> <Critical> <Security> <BEA-090403> <Authentication for user beaadmin denied>
<Mar 11, 2015 12:37:57 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user beaadmin denied
weblogic.security.SecurityInitializationException: Authentication for user beaadmin denied
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:966)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User beaadmin weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090295]caught unexpected exception
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:251)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<Mar 11, 2015 12:37:57 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Mar 11, 2015 12:37:57 PM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Mar 11, 2015 12:37:57 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Why is it looking for demotrust.jks file to start the Managed Server. We don't use the demo trust and cannot copy to the location it is referring to. I followed the solution provided at the below link:
http://serverfault.com/questions/106499/custom-trust-and-custom-identity-keystore-in-weblogic-10-3
There are 2 options given in the link. To update the boot.properties of the Admin Server and appending JAVA_OPTIONS to DomainEnv file. Both of these caused the failure of Admin Server. I couldn't bring up the server after these changes.I also came across posts talking about boot.properties for Managed Server. I don't see the security folder that has boot.properties for my Managed Server (verified it on both windows and linux boxes).
Thanks in advance.
-nn.Hi Faisal,
Here is the config.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<domain xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd"
xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security"
xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<name>JCRMDomain</name>
<domain-version>10.3.4.0</domain-version>
<security-configuration xmlns:xacml="http://xmlns.oracle.com/weblogic/security/xacml">
<name>JCRMDomain</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType">
<sec:control-flag>SUFFICIENT</sec:control-flag>
</sec:authentication-provider>
<sec:authentication-provider xmlns:ext="http://xmlns.oracle.com/weblogic/security/extension" xsi:type="ext:jcrm-authenticatorType">
<sec:name>JcrmAuthenticator</sec:name>
<sec:control-flag>SUFFICIENT</sec:control-flag>
</sec:authentication-provider>
<sec:role-mapper xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
<sec:authorizer xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:credential-mapper xsi:type="wls:pki-credential-mapperType">
<sec:name>PKICredentialMapper</sec:name>
</sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:user-lockout-manager>
<sec:lockout-threshold>3</sec:lockout-threshold>
<sec:lockout-duration>15</sec:lockout-duration>
<sec:lockout-reset-duration>99999</sec:lockout-reset-duration>
</sec:user-lockout-manager>
<sec:deploy-role-ignored>false</sec:deploy-role-ignored>
<sec:deploy-policy-ignored>false</sec:deploy-policy-ignored>
<sec:fully-delegate-authorization>true</sec:fully-delegate-authorization>
<sec:security-dd-model>DDOnly</sec:security-dd-model>
<sec:combined-role-mapping-enabled>true</sec:combined-role-mapping-enabled>
<sec:name>myrealm</sec:name>
<sec:delegate-m-bean-authorization>false</sec:delegate-m-bean-authorization>
<sec:password-validator xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator"
xsi:type="pas:system-password-validatorType">
<sec:name>JCRMPasswordValidator</sec:name>
<pas:max-password-length>31</pas:max-password-length>
<pas:min-password-length>15</pas:min-password-length>
<pas:min-numeric-characters>2</pas:min-numeric-characters>
<pas:min-lowercase-characters>2</pas:min-lowercase-characters>
<pas:min-uppercase-characters>2</pas:min-uppercase-characters>
<pas:min-non-alphanumeric-characters>2</pas:min-non-alphanumeric-characters>
</sec:password-validator>
<sec:deployable-provider-synchronization-enabled>false</sec:deployable-provider-synchronization-enabled>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted>{AES}cpwhv2peqwl0Z8Ma1Jk7KlmC6d1gtCAqxnzrmR5ssybHpM9AUzbBRJ7rE7m4/7U16IHgsTMkcOr/5/abZJ4NeuHR45jdDK1EjFmnUuPssISmGkan3EIpCKHmPPIynVxh</credential-encrypted>
<node-manager-username>wdUXiuwL5A</node-manager-username>
<node-manager-password-encrypted>{AES}UDiZjaLOrm0y+/I9noQVURudpzmRKMBOQR2B8ofNIt8=</node-manager-password-encrypted>
</security-configuration>
<server>
<name>AdminServer</name>
<max-http-message-size>10000000</max-http-message-size>
<ssl>
<name>AdminServer</name>
<enabled>true</enabled>
<hostname-verifier xsi:nil="true"></hostname-verifier>
<hostname-verification-ignored>true</hostname-verification-ignored>
<client-certificate-enforced>false</client-certificate-enforced>
<listen-port>8443</listen-port>
<two-way-ssl-enabled>true</two-way-ssl-enabled>
<server-private-key-alias>localhost.localdomain</server-private-key-alias>
<server-private-key-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</server-private-key-pass-phrase-encrypted>
<ssl-rejection-logging-enabled>true</ssl-rejection-logging-enabled>
<allow-unencrypted-null-cipher>false</allow-unencrypted-null-cipher>
<use-server-certs>true</use-server-certs>
<jsse-enabled>true</jsse-enabled>
</ssl>
<listen-port-enabled>false</listen-port-enabled>
<web-server>
<keep-alive-secs>60</keep-alive-secs>
<https-keep-alive-secs>60</https-keep-alive-secs>
</web-server>
<listen-address/>
<java-compiler>javac</java-compiler>
<tunneling-enabled>true</tunneling-enabled>
<tunneling-client-ping-secs>45</tunneling-client-ping-secs>
<tunneling-client-timeout-secs>40</tunneling-client-timeout-secs>
<client-cert-proxy-enabled>false</client-cert-proxy-enabled>
<key-stores>CustomIdentityAndCustomTrust</key-stores>
<custom-identity-key-store-file-name>certstores/keystore</custom-identity-key-store-file-name>
<custom-identity-key-store-type>JKS</custom-identity-key-store-type>
<custom-identity-key-store-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</custom-identity-key-store-pass-phrase-encrypted>
<custom-trust-key-store-file-name>certstores/truststore</custom-trust-key-store-file-name>
<custom-trust-key-store-type>JKS</custom-trust-key-store-type>
<custom-trust-key-store-pass-phrase-encrypted>{AES}uSkLzfC74bMCEjomgVdHtVw47iZg8BN71g7cdKr+XHo=</custom-trust-key-store-pass-phrase-encrypted>
<overload-protection>
<panic-action>system-exit</panic-action>
<failure-action>force-shutdown</failure-action>
<server-failure-trigger>
<max-stuck-thread-time>600</max-stuck-thread-time>
<stuck-thread-count>3</stuck-thread-count>
</server-failure-trigger>
</overload-protection>
</server>
<server>
<name>MyManagedServer1</name>
<ssl>
<enabled>true</enabled>
<listen-port>8445</listen-port>
<server-private-key-alias>localhost.localdomain</server-private-key-alias>
<server-private-key-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</server-private-key-pass-phrase-encrypted>
</ssl>
<machine xsi:nil="true"></machine>
<listen-port>8444</listen-port>
<listen-port-enabled>true</listen-port-enabled>
<cluster xsi:nil="true"></cluster>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
<key-stores>CustomIdentityAndCustomTrust</key-stores>
<custom-identity-key-store-file-name>certstores/keystore</custom-identity-key-store-file-name>
<custom-identity-key-store-type>JKS</custom-identity-key-store-type>
<custom-identity-key-store-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</custom-identity-key-store-pass-phrase-encrypted>
<custom-trust-key-store-file-name>certstores/truststore</custom-trust-key-store-file-name>
<custom-trust-key-store-type>JKS</custom-trust-key-store-type>
<custom-trust-key-store-pass-phrase-encrypted>{AES}uSkLzfC74bMCEjomgVdHtVw47iZg8BN71g7cdKr+XHo=</custom-trust-key-store-pass-phrase-encrypted>
<data-source>
<rmi-jdbc-security xsi:nil="true"></rmi-jdbc-security>
</data-source>
</server>
<production-mode-enabled>false</production-mode-enabled>
<embedded-ldap>
<name>JCRMDomain</name>
<credential-encrypted>{AES}LNAnq4qCQQmy9rCOMN+uIZVPq1bVvPrwQqqtOScZrnYmwESt9aruHNVy4IjqMWz7</credential-encrypted>
</embedded-ldap>
<administration-port-enabled>true</administration-port-enabled>
<configuration-version>10.3.4.0</configuration-version>
<admin-server-name>AdminServer</admin-server-name>
</domain>
It has 'CustomIdentityAndCustomTrust' for both Admin Server as well as managed Server in it.
Thanks,
nn
Maybe you are looking for
-
Unable to view version history if document status is in progress
Hi, I have a SharePoint integrated workflow for document approval. The k2 workflow is working properly except there is an error when opening version history or document property of an item in SharePoint library while it is in progress (waiting for ap
-
Undeleted MTS files not working
Hey everyone I've been trying to resolve this issue for about 2 weeks now and I'm having a lot of difficulty. I have been checking out countless forums, blogs and the like, but still have not been able to solve my problem. I will try and be brief, bu
-
how do you enlarge the font size on iphone 4s?
-
?start@last-page? ?end body? code issue in RTF generate format
Hi Experts, Do you have any idea how to print the <start@last-page> content when generating RTF format? It does not print at all in this format but in other format, it works fine. Thanks! :) Edited by: BIP sophomore learner on Jul 13, 2011 2:35 AM Ed
-
Container is cleared and producing mutltiples when popuping error messages
Hi, I want to display error messages in a POP UP . I am using following code. The err_msg[] contains the BAPi return Message IF err_msg[] IS NOT INITIAL. when control does not exist, create it IF g_container IS INITIAL. create dia