Relationship between CRMPAROLTP table(R/3) and R3AC6 transaction(CRM)...

Hello Experts,
In transaction R3AC6 where you maintain the middleware parameters, I maintained the 'PRICINGTYPE' value
to 'G' and in table CRMPAROLTP in R/3, I added a new entry for 'PRICINGTYPE' also with a value of 'G'.
Now, I am expecting that when I create a new sales order from CRM and passed to R/3, the pricing type of 'G'
is not being carried out when I check the line item conditions. I have checked so many SAP notes and I can
say that the pricing type 'G' is supported and needed SAP notes are installed in our CRM. We are currently running
CRM version 4.0.
I really don't know what to do anymore. Hope you can help me guys. Thank you and take care!

Hi Guys,
Any help?

Similar Messages

Where to find the information regarding relationships between the tables?

I am developing a Windows based app which among other things lets users view SAP table schema and relationships.
If I use SAP GUI and dig up a bit on say the MARA table I can see that
Material Master (MARA) is related with
1) MaterialDescription (MAKT) on columns MANDT and MATNR
2) MaterialPlantData (MARC) on columns MANDT and MATNR
and so on
My question is - in which table the information regarding relationships between the tables is stored? There must be a data dictionary table which would be storing the relationships data. Which is it? Note: I will programatically access the table, NOT from the UI.

Thanks a lot...
I am still working on it, but here are the current findings. DD05S, DD08L and DD08T: The schemas for these tables were very promising for the thing I was looking for. Unfortunately the data within dose not seem to serve my exact purpose.
I found another one DD26S, which has almost 90% of the relationships I wish to explore. Do you know what is it supposed to contain?
Thanks a lot for your help.
Message was edited by: Salil Khedkar

Technical Reference question: Relationship between WIP Tables & INV Tables

Hi Community,
Due to my profile is more closer to the Financials Area than the Manufacturing and Work In Process Area, I want to leave the following question in the community, in order to see if anybody can give me an answer.
We want to modify a view created for its use in Discoverer. This view, retrieves the total number of units or kilograms that we have of all our items in all of our subinventory organizations, till submitted date. For all this itms, we want to know how many of them, and in which quantity should we depreciate them (is that to say, we categorized those items based on its antiquity in stock, to 6 months, 12 months, 18 months and more then 18 months). How we know the time range?, making a comparison between its last purchase date and its last sales date; and the result of that, with the submitted date.
This logic, works fine for all items added to our stock as a result of a Purchase Order and a Sales Order, cause in both operations, we can get the purchase date and the sales date; but for all of our items that we manufacture in our manufacturing process, all those items appears in the Discoverer Report, totally depreciated; is that to say, with an antiquity grater than 18 months. And in some cases that is correct, cause there are materials and items in stock since beginning implementation and migration from the old system, but for a huge number of them that is not correct, cause its stock is "constantly" up and down based on the manufacturing process or because its components are all of them purchased by a Purchase Order, but the final item get as a result of the manufacturing process, does not have this purchase date (does not inherit the first or last purchase date from any of its components), cause the only date that we can retrieve is the production date (transaction date) when the item was created.
So we want to include this production date in the logic of the query used to creation of the view which feed the discoverer report or to know the relationship between the WIP tables and INV tables (those where the items are reflected), in order to match the item, created in the manufacturing process, and the stock of that item in our subinventory organization.
Thanks in advance for your help and assistance.
Luis

Hello Experts, One of the Interview I faced a scenario,I have two tables T1,T2 and i have access to oracle and informatica .How can i know the relationship between two tables? Thankssirii

How to build "Greater/less or Equal" relationships between two tables?

Hi,
Is there any straightforward approachs to realize the following kind of relationships between two tables?
Table1.process_end_date >= Table2.work_start_date and
Table1.process_end_date <= Table2.work_end_date
BTW, there's no common columns for these two tables to do simple joins (inner, outter...).
Thanks.
Regards,
Qilong

Sure.
Table.SelectRows filters a given table (in this case Table2) based on a function provided as the second argument.
(table2Row) => is the start of our filter function. It defines a function that takes one argument, called table2Row. Each row of Table2 will be passed to this function. If the function returns true, the row will be kept. If the function returns false,
the row will be filtered out.
The right hand side of the => is the filter expression. Because we're adding the custom column to Table1, we can reference a field in the current row of Table1 using square brackets (e.g. [process_end_date]). To reference the fields in the current row
of Table2, we have to index into the table2Row variable passed to our function (e.g. table2Row[work_start_date]).
Hope that helps.
Ehren

How to give relationship between two tables with comon column with between oprator

Hi Folks,
I am using Sql Server 2008R2. I am getting a problem to establish relationship between two tables.
I have two Tables, 1.Inventory Details Table another one is Inventory Header Table.
Inventory Details Table having a column Card No and inventory Header Table having columns From card No and To Card No.
I want to give relationship between these two tables with Card no. Could you please provide me the Sql Query.
Your help would be greatly appreciated .
Regards
hasthi.
email:[email protected]

Hi Raju,
We have two way that we can relate to the table either join or quality condition use following syntax/Query for relating two tables
select * from Inventory_Details ID inner join Inventory_Header IH on ID.CardNo between IH.FrmCardno and IH.ToCardNo
or
Select * from Inventory_Details ID ,Inventory_Header IH where ID.CardNo=IH.CardNo OrSelect * from Inventory_Details ID ,Inventory_Header IH where ID.CardNo between IH.FrmCardno and IH.ToCardNo
Hope this will help you
Niraj Sevalkar

Relationship Between ECC Customers (Contact Persons) and CRM BP

Hello,
I am new to middleware and need some help with the relationship between ECC customers/contact persons and CRM business partners.
We are transferring via bdoc this information from ECC to CRM.
Which bdoc types are used when transferring customers/contact persons? I believe it is BUPA_MAIN but am not too sure. How is the relationship between customer its contact person transferred? Is this done through BUPA_REL? I looked at the segment fields in SBDM but am not too sure how to understand the relationship...
Thanks for the help!
Regards,
Tiffanie

Thanks! With the initial load, how do I check what fields are being passed in the bdocs?
I tried to look for customer_main, customer_rel in SBDM and couldn't find it. Instead I used BUPA_MAIN and found some segments but couldn't find all the data that was being transferred (e.g. customer name, address, etc...) Where do I find all the fields contained in the bdoc?
I see them in SMW01 when I view the bdoc contents but can not find the actual structure (data fields) that are being brought in from ECC.
Thanks!
Tiffanie

Relationship between two tables

Hi,
Can some one tell me how can i find the relationship between two tables in CRM. is there any transaction for the same. Is it possible to see the data model.
Thanks
Akila.R

Hi Nishant ,
Could you please explain brief about the Data relationship ......??
I can see the Foreign Key & Check Table relation in se11 .
Since I am in the Analysing phase ,
what are all the details can i get from Foreign Key & Check table kind relations ...??
Thanks
Rgds
Ganesh

Re: What is the relationship between the JTA Server Timeout and

Two things. The transaction timeout is set when the transaction starts. When are you setting the timeout, and where are you starting the transaction?
          There is a bug in 6.0 SP1. The EJB subsystem always sets the transaction timeout. If you don't specify anything in your descriptor. It sets the timeout to 30 seconds. However, if you
          change the JTA default to 60 seconds, the EJB container won't see this change. This is fixed in our next minor release.
          -- Rob
          Tom Gerber wrote:
          > What is the relationship between the JTA Server Timeout and an EJB's <transcation-timeout-seconds> parameter?
          >
          > Does the EJB's timeout have to be >= the servers to take effect?
          >
          > We tried setting the timeout in the XML file to 60 seconds but the transaction still timed out after 30 seconds or so which makes me believe the server timeout overrides the EJB's timeout.
          >
          > Is this correct behavior?
          >
          > We are on WL 6.0 sp1
          >
          > Thanks
          >
          > Tom


Sorry, you cannot query for known bugs yet.
          Work is in progress :)
          Kumar
          Tom Gerber wrote:
          > Is there a place on the WebSupport site for WebLogic that I can query
          > for know issues for WL 6 sp1?
          >
          > I tried the Find Solutions but didn't find much.
          >
          > Thanks
          >
          > Rob Woollen wrote:
          >
          > > Two things. The transaction timeout is set when the transaction starts. When are you setting the timeout, and where are you starting the transaction?
          > >
          > > There is a bug in 6.0 SP1. The EJB subsystem always sets the transaction timeout. If you don't specify anything in your descriptor. It sets the timeout to 30 seconds. However, if you
          > > change the JTA default to 60 seconds, the EJB container won't see this change. This is fixed in our next minor release.
          > >
          > > -- Rob
          > >
          > > Tom Gerber wrote:
          > >
          > >> What is the relationship between the JTA Server Timeout and an EJB's <transcation-timeout-seconds> parameter?
          > >>
          > >> Does the EJB's timeout have to be >= the servers to take effect?
          > >>
          > >> We tried setting the timeout in the XML file to 60 seconds but the transaction still timed out after 30 seconds or so which makes me believe the server timeout overrides the EJB's timeout.
          > >>
          > >> Is this correct behavior?
          > >>
          > >> We are on WL 6.0 sp1
          > >>
          > >> Thanks
          > >>
          > >> Tom
          > >

Difference between Reports in normal ABAP and Reports in CRM

Hi Experts,
I am new to CRM. Can someone tell me the Difference between Reports in normal ABAP and Reports in CRM.
It will be very useful if someone explains with example.
Some where in SDN i read in CRM we should not select statment. Then how to fetch data?
Please give me more basic concepts about CRM programming.
Thanks,
RAGU

Hi Ragu,
You can find much information at http://service.sap.com/crm-inst.
Go to Installation & Upgrade Guides -> SAP Business Suite Applications -> SAP CRM
Check the CRM version in which you are working and get the documents.
FMs are specific to the requirement. Like all Business Partner related FMs generally start with BUPA* or BAPI_BUPA*.
For CRM transaction data you can get info using FM CRM_ORDER_READ. To create a new transaction use CRM_ORDER_MAINTAIN and CRM_ORDER_SAVE.
More information can be fetched by surfing through the SDN threads and checking in SE37 t-code.
Hope this helps!
Regards,
Saumya

Creating a relationship between one table and the PK in another

Sorry the subject of this message is a bit vague. I'm not sure how to describe this problem in one sentence.
So here's the issue: I've just created a new block on my form based on table2. Table2 contains t1_id which is the FK link to Table1.
What I want is when one of the fields in Table2's block is changed and inserted, the t1_id is inserted in the applicable row. Essentially, I need :table2.t1_id to have the 'Copy From Item' property set at :table1.id
I cannot seem to see where in designer this option is. I asked a friend and he said what I need to do is 'create a relationship between the two values in designer'. Huh? In the Table Definitions the FK is set for the two, so I'm not sure how to do this.
Another problem, which I'm believing will be solved when this is, is that when the form loads, this new block, table2, is not automatically populated with the applicable values from the table.
Thanks for any help. It's greatly appreciated!

Do you mean that you want to create a Master-Detail Form using Designer?
If yes, you need to define the entity usage from the Function Hierarchy Diagrammer, then attribute usage definition. Generate the module using Application Design Transformer. You need to define the Context so that master table's PK will be carried over to the detail table.

Multiple relationships between 2 tables in report model

if i have 2 relationships between the same two tables. how do i use one over the other?
for example, i have 2 tables order and ordeDate table , with the definition of:
order table:
orderid int,
qty int,
orderdate date)
and orderDate table:
(id int,
endOfDay date,
endOfMonth date)
i created one relation ship as orderDate = endOfDay and anothe relationship as orderDate = endOfMonth. some of my reports would need to use the relationship between orderDate = endOfDay and the month end reports would need to use yhe relationship between
orderDate = endOfMonth. How do I select one relationship over the other when building the report?
Ideally the database should have been redesigned, which cannot be done at the moment as this will be done on the next project

Your table design is completly wrong. I am now sure how you are maintaining OrderDate table. SQL Server is RDBMS. Without relation how will you pick those rows from Order table whose order date is equal exactly equal to datefield in OrderDate table. The
only way is to derived endofDay and endofMonth in the select query directly. I understand endofMonth. But what is EndofDay ? And that too a date datatype ??
You can run the below query but it will not return specific order date from order table,
SELECT * FROM [ORDER] WHERE
CONVERT(CHAR(10),ORDERDATE,101) IN (SELECT CONVERT(CHAR(10),endOfDay,101) FROM ORDERDATE)
SELECT * FROM [ORDER] WHERE
CONVERT(CHAR(10),ORDERDATE,101) IN (SELECT CONVERT(CHAR(10),endOfMonth,101) FROM ORDERDATE)
Even if i JOIN the two table by orderdate and endofDay/endofMonth, we will not received specific orderDate. And this is becouse if your Order table contains multiple orderDate that are matching to either endofDay or endofMonth, the final output will contain
multiple orderDate details. I don't think this is what you need. Therefore you need to modify the OrderDate table or provide us the definition for endofDay and endofMonth, and how are you maintaining.
Regards, RSingh

Adobe Livecycle Designer Question (relationships between nested tables)

Hi,
I am currently working on a PDF document using nested tables.
I have already created the relationships between the nested tables in the context area.
However, I do not know how to create the same relationships between the nested tables in the hierarchy (layout.)
Any and all help will be greatly appreciated.
Thank You.

Hello John,
We define data in the context area only. The defined data in the context area will be available in the Layout area in the hierachy model(Data View tab).
In the Layout tab, we just need to design the form.
Hope I am clear. Please let us know if you want more details.
Thanks
Ramakrishna

How to find relationship between database tables

Hi Mate,s.
Iam new to SAPBW , PLZ tell me , How to find releationship between database table(Transperent tables).
Regards.
harry

hi harry,
from your previous postings, i guess you are asking relationship between tables in r/3, following links may help :
http://www.sapgenie.com/abap/tables.htm
http://www.sapgenie.com/abap/tables_sd.htm
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sapgenie.com/abap/tables_fi.htm
http://www.sapgenie.com/abap/tables_ps.htm

What is the relationship between Acrobat Pro, Acrobat Reader, and the Acrobat Reader Plugin for Firefox?

Mozilla's plugin scanner identifies an old version of the Reader plugin on my machine. The download indicates a massive 55 MB size, and implies that Reader itself will be installed on my machine. HOWEVER, I don't want Reader installed! I use Acrobat Pro and I have noticed some problematic interactions over the years.
What is the relationship between Acrobat Pro, Reader, and the Firefox Plugin?

You can also check out the comparison at http://www.adobe.com/products/acrobat/matrix.html.

Relationship Between BP, Contract, Contract Account and industry

Hi,
Anybody can send the relatonship diagram between BP,Contract, Contract Account, and Industry , with Relation ship fields,
Regards,
Sivakumar.

Can u send me your mail id, So that i can mail u.
These relation is your business specific.....
If u want i can send you.......
Regards,
Shiv

Relationship between CRMPAROLTP table(R/3) and R3AC6 transaction(CRM)...

Similar Messages

Maybe you are looking for