Relationship between message, sequence and queue
Hello Colleagues,
I am new to PI.
I want to know the relationship between PI Message,Queue (bgrfc) and sequecne.
In sxmb_moni i could see all these enteirs in technical view, but what I am not sure how sequnce and queue works exactly.
Kindly explain or refer the related links.
-Siva
Hi,
thanks for advice, now It works correct. But I have another problem with connection between comboboxes and planning sequences (functions). Do you know any way how to take the values of variables back to comboboxes. Its opposite way.
For better understanding I execute planning sequnce and for this sequence I want to use reversible binding. I want to use in planning function (in planning sequence) one variable for characteristic "VERSION" and I want to copy from VERSION 1 to VERSION 2. So I have in combo for char. Version value 1 and I want to after execution of planning sequence change the value in combo to 2. Do you have any experience?? This is typical for copy between versions.
Thanks a lot.
Best regard.
Petr
Similar Messages
-
How to create the relationship between ESSBASE 11 and DM in OBIEE11
Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar -
How to create the relationship between ESSBASE 11 and DM in OBIEE 11G?
Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok
So what I missing the steps? Please help me. Thanks.>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar -
Relationship between material type and industry sector
Hi experts
when using t-code mm01,there are two fields material type and industry setor in screen.Is there any relationship between material type and industry sector? I want to know if user be able to see the material type related to particular industry sector?
thanks in advance!Hello
There is no direct relationship between the material type and the industry sector.
The industry sector is used only for field sttus maintenance (fields in display/optional/requierd entry) in transactions.
We will assign seperate field reference groups to industry sectors and deopending on how we configure the field references, the fields will appear for the materials created for that industry sector.
regards -
Relationship between logical system and a client
Hi,
Our internal notes say that, in order to create a new client, I must do the following:
1. Create a logical system using BD54. The client name must be SID + "CLNT" + number. In my case, this would be NSPCLNT100.
2. Create a client using SCC4.
Questions:
1. What is the relationship between the client and the logical system?
2. How does SAP know that client number 100 must be related to NSPCLNT100? I am not specifying this relationship anywhere.
Thank you in advance for your help.
Regards,
Peteryou assing logical system to a client from SCC4
-
Question the relationship between AR invoice and Outgoing payment
Dear All,
Does anyone the know the the relationship between AR invoice and Outgoing payment? because I would like to print the report in specific date range. For example, today is 02 July 2009. I want to print "AR invoice as at 31 Mar 2009", by using SQL. It seems like date back.
From SamsonHi Samson,
Even i haven't done much r n d bout this but what i came to know is that, there might be a scenario where you may want to make a payment to your customer. In this case we can use the Outgoing payment for the same. The system doesnt stop you from doin so. I have seen this in SAP B1 2005B, PL34.
Regards,
Joseph -
In which table we can find the relationship between Role id and Task id
Hi Experts,
In which table we can find the relationship between Role id and Task id in Cprojects.
Thanks
SubhaskarHi Subhaskar,
Apart from DPR_ENTITY_LINK , you can also get it from table DPR_PART.
Please go through the below link
http://wiki.sdn.sap.com/wiki/display/PLM/cProjectstablesin+SAP
I hope this will help you.
Regards,
Rahul -
Table name having relationship between Business area and Profit Center
Hi guys,
Can you tell me the table name showing the relationship between Business area and Profit Center in fb60 transaction.
thnx
hemaHI.
BSEE u2013GSBER Business area.
BSID-PRCTR Profit center
Regards.
jay -
The relationship between production order and purchase requistion After running MPS
Dear Experts:
I met a issue . My users want to know the relationship between production order and purchase requistion . In my company we create production order and purchase req. by running MRP. our operations are:
1. T-CODE: MD41 create planned order .
2. T-CODE: CO41 convert planned order to production order .
3. T-CODE: MD15 convert planned order to purchase Requisition.
but I can't find the relation of them. would you like to give me some advices? thank you very much.Hello
On the standard MTS process there is no link between the requirement (STO) and the replenishment element (production order).
See the below extraction from note 12955:
There is no index that the system could use to determine which issue element (sales order, planning, reservation, dependent requirement, ...) is covered by a certain receipt element (purchase order, production order, purchase requisition, planned order, stock level ...).
A production order, for example, can be created to cover several different requirements, even when you are using lot sizing procedure EX.
You can use transaction MD09 or MD04to determine the pegged requirements, but they are calculated dynamically and there is not fixed link between requirement and receipt.
BR
Caetano -
Message Tracking and Queue Viewer access is denied - Exchange 2010
Hello,
I am experiencing Message Tracking and Queue viewer problems on my exchange server.
Message Tracking problem
When i run message tracking via EMC or powershell, i receive the following error;
Failed to connect to the Microsoft Exchange Transport Log Search server on computer "myserver.mydomain.com.br". Verify that a valid computer name was used and the Microsoft Exchange Transport Log Search service is started on the target computer. The
error message is: "Access is denied".
Exchange Transport Log Search service is confirmed running and have tried by restarting the service
Logon user is a member of Domain Admins, Enterprise Admins and Exchange Organization Administrators
Message Tracking Logs are generated properly
Queue Viewer problem
When i run Queue viewer, i receive the following error;
The Queue Viewer operation on computer "myserver.mydomain.com.br" has failed with exception. The error message is: Access is denied. It was running command.............................................................
My server information are as follow;
4 Exchange Server 2010 sp3
2 Mailbox Server and 2 Hub/CAS
Mail-flow is working fine
What should I grant permission for a group of users can have access to the Message Tracking ?
Regards,Hi!
The group rule was created as described below. The error persists!
[PS] C:\Windows\system32>Get-RoleGroup "Exchange Access Message Tracking" | fl
RunspaceId : 4229f35d-90f1-4c4e-822d-387979921052
ManagedBy : {bancobmg.com.br/Users/Raphael Henrique Duarte Campos}
RoleAssignments : {Message Tracking-Exchange Access Message Tracking}
Roles : {Message Tracking}
DisplayName :
ExternalDirectoryObjectId :
Members : {bancobmg.com.br/Users/Raphael Henrique Duarte Campos}
SamAccountName : Exchange Access Message Tracking
Description :
RoleGroupType : Standard
LinkedGroup :
Capabilities : {}
LinkedPartnerGroupId :
LinkedPartnerOrganizationId :
IsValid : True
ExchangeVersion : 0.10 (14.0.100.0)
Name : Exchange Access Message Tracking
DistinguishedName : CN=Exchange Access Message Tracking,OU=Microsoft Exchange Security Groups,OU=Global,DC=ba
ncobmg,DC=com,DC=br
Identity : bancobmg.com.br/Global/Microsoft Exchange Security Groups/Exchange Access Message Trackin
g
Guid : 0957152d-2073-4f75-b40e-63f45eb20f67
ObjectCategory : bancobmg.com.br/Configuration/Schema/Group
ObjectClass : {top, group}
WhenChanged : 06/02/2014 16:25:26
WhenCreated : 06/02/2014 16:25:26
WhenChangedUTC : 06/02/2014 18:25:26
WhenCreatedUTC : 06/02/2014 18:25:26
OrganizationId :
OriginatingServer : bmg190.bancobmg.com.br
[PS] C:\Windows\system32>Get-ManagementRoleAssignment "Message Tracking-Exchange Access Message Tracking" | fl
RunspaceId : 4229f35d-90f1-4c4e-822d-387979921052
User : bancobmg.com.br/Global/Microsoft Exchange Security Groups/Exchange Access Message Tracki
ng
AssignmentMethod : Direct
Identity : Message Tracking-Exchange Access Message Tracking
EffectiveUserName : All Group Members
AssignmentChain :
RoleAssigneeType : RoleGroup
RoleAssignee : bancobmg.com.br/Global/Microsoft Exchange Security Groups/Exchange Access Message Tracki
ng
Role : Message Tracking
RoleAssignmentDelegationType : Regular
CustomRecipientWriteScope :
CustomConfigWriteScope :
RecipientReadScope : Organization
ConfigReadScope : OrganizationConfig
RecipientWriteScope : Organization
ConfigWriteScope : OrganizationConfig
Enabled : True
RoleAssigneeName : Exchange Access Message Tracking
IsValid : True
ExchangeVersion : 0.11 (14.0.550.0)
Name : Message Tracking-Exchange Access Message Tracking
DistinguishedName : CN=Message Tracking-Exchange Access Message Tracking,CN=Role Assignments,CN=RBAC,CN=BANC
O BMG SA,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=bancobmg,DC=com,DC=br
Guid : c3768a00-3f36-4532-b586-a06842a85e24
ObjectCategory : bancobmg.com.br/Configuration/Schema/ms-Exch-Role-Assignment
ObjectClass : {top, msExchRoleAssignment}
WhenChanged : 06/02/2014 16:25:26
WhenCreated : 06/02/2014 16:25:26
WhenChangedUTC : 06/02/2014 18:25:26
WhenCreatedUTC : 06/02/2014 18:25:26
OrganizationId :
OriginatingServer : bmg190.bancobmg.com.br
How can I identify if there is any setting to be done?
Thank you! -
How would i design the relationship between "question", "subquestion", and "answer"
Hi all. Consider the following scenario:
Scenario:
A Question has an Answer, but some Questions have Subquestions. For example:
1. Define the following terms: (Question)
a) Object (1 marks) (Subquestion)
An instance of a class. (Answer)
b) ...
2. Differentiate between a constructor and a destructor (2 marks)
(Question)
A constructor constructs while a destructor destroys.
(Answer)
Question:
I want to model Questions, Subquestion, and Answer as Entities with relationships/associations, preferably binary relationships as i feel ternary relationships will be problematic while programming. Any suggestion on how i would
go about this?
There is never infinite resources.
For the Question Entity, a question has the attributes "QuestionPhrase <String>", "Diagram<Binary>", and "Marks
<Decimal>".
For the SubQuestion Entity, a subquestion has the attributes "SubQuestionPhrase <String>", "Diagram<Binary>", and "Marks <Decimal>".
For the Answer Entity, an answer has attributes, "AnswerPhrase<String>", "Diagram <Binary>"Yes. I am in .Net. I sure do hope i did not ask in the wrong forum. :-|
Hi KCWamuti,
If you need to design the relationship between Question table and Answer table in SQL Server, as Uri’s and Visakh’s posts, you can create the foreign key to establish relationship between tables, and use join in query to get your desired result. For more
information about JOIN in SQL Server, please review this article:
Different Types of SQL Joins.
However, if you need to model Questions, Subquestion, and Answer as Entities in .Net, then the issue regards data platform development. I suggest you post the question in the Data Platform Development forums at
http://social.msdn.microsoft.com/Forums/en-US/home?category=dataplatformdev . It is appropriate and more experts will assist you.
Thanks,
Lydia Zhang -
Relationship between Role id and Task id table name?
Hi
In which table we can find the relationship between Role id and Task id in saphcm
Thanks a
vibinHi,
HRP1001 --Infotype 1001 DB Table (Relationships)
Regards,
mohammed -
Difference between message type and idoc type
Hi
difference between message type and idoc type
Regards
RamaHi,
Message Type:
A message type represents the application message exchanged between R/3 systems and R/3 and an external system. A message type characterises the data sent across systems and relates to the structure of the data called an IDOC type.
Diff. with IDOC type
An IDoc type specifies the structure of the data.
A message type specifies the meaning of the data
Diff. b/w IDOC type and IDOC
An IDoc type is the definition of a specific data structure.
An IDoc is an actual instance of data based on an IDoc type. Therefore, there can be many IDocs created from a single IDoc type.
Example:
MATMAS is the message type and MATMAS05 is IDoc type for Material Master.
Thanks,
Shankar -
Relationship between campaign code and BP Address
Hi all,
I am new to CRM. I want to know the relationship between campaign code and BP Address.
Or how it links with GUID.
Small query but full points.
Thanks
SanketHi,
The field name for Camapign code is
CRM_MKTPL_CAMPAIGN-SHORTCUT
and for BP address
COM_DYNP_PARTNER_UI-SHORT_WITH_STREET.
Thanks
Sanket -
Table relationship between Profit Center and G/L account.
Hi,
I have an issue related to wrong profit centers. We have a workflow that updating the profit center to a G/L account regarding the business of Reverse Logistic. In that business, we shift from a G/L account to another G/L account.
Now I have to find the tables relationship between Profit center and G/L account, which contains the correct relationship between a profit center and a G/L account, so that I can profit centers related to the moved G/L account and the original G/L account.
Thank you.
Moderator: Please, search before postingHi
The Posted data can be seen in BSEG & GLPCA/FAGLFLEXA
The default assignment of GL & PC can be seen in 3KEH / FAGL3KEH
br, Ajay M
Maybe you are looking for
-
Officejet Pro L7590 - Printer intermittently skips printing complete lines of black ink.
My Officejet Pro keeps intermittently skipping lines of black ink when I copy or print a document. There appears to be no pattern as to where on a page the line skips printing. When I initially replaced my B/Y printhead, the problem appeared to have
-
How to edit content in a cell - how can u set a shortcut to do that
so i have been left clicking to change the content. how do you do that on the keyboard? i found a list of shortcuts under some menu in numbers, but i couldnt set the shortcuts myself thanks alot, this will save me soooo much time
-
Which is the maximum number of simultaneous IP sessions on 7600 with/out SAMI?
Please I need help from someone who has ever wondered and get to know the maximum number of simultaneous IP sessions on 7600. On the documentation, this is the applicable information that we find regarding the number of sessions: http://www9.cisco.co
-
Hello, I have been a mac user for about 3 months. I have around 3600 images in my iphoto library. I have noticed over the past week or so that it seems to be dropping images. I see grey boxes instead of thumbnails, and it keeps creating a directory c
-
I have a macbook air with 121 GB flash storage capacity. I currently use x amount of applications 11gb, movies 13gb, photos 16 gb,music 6 gb, etc. However, it also states that I use 60 gb of 'other'. What can other be? I have nowhere near such a huge