Relationship between the Koren Colour Management Model and PSE11

I would like to relate the settings I apply to colour printing in PSE11 to the general model of Colour Management, in particular that described by Norman Koren(see his Papers on the internet). Then I will better understand what I am doing.
I have an Epson printer and the driver contains the paper profiles for Epson papers.
In principle, the Koren Model shows each device(camera image, monitor and printer) is linked through its Colour Engine(with the device profile infeed) to the central Image Working Colour Space.
The PSE11 controls are:
1. Printer Settings(through the Windows printer menus)
2. Colour Management (through Edit->Colour Management, and
3. Printer settings(through the File->print screens).
1 and 3 are clearly associated with the printer. What happens when I select the options in 3? Am I modifying the paper profiles?
Is there any control over the central Image Working Space? Is the Koren Model more complicated than the PSE11 Model?
I know Colour Management can get very complicated - but I hope to find an explanation that will help an amateur photographer!
Grateful for any help.

The menu edit / color management defines which color space will be used internally by Elements to record the edits which change the RGB values of pixels. A correct choice will insure a correct rendition on a calibrated display.
Several cases :
- the photo file is tagged for a specific color space. Then, if Elements can work internally with that color space, it uses it for the calculations. Contrary to common belief, Elements can work internally with other spaces than sRGB or aRGB. Lightroom users can easily check that a Prophoto tagged image can be processed in Elements. The picture is correctly displayed and when you 'save as' the checkbox for color space, it is in Prophoto RGB.
- The photos are not tagged : that's where the options to 'optimize' for sRGB come into play. The internal working space will be assigned to the photo : sRGB to optimize for screen, aRGB to optimize for print.
- Another situation : raw files. Raw data don't have a color space. They simply record the 'brightness' of the light gathered under the RGB filters. The correct 'white balance' and color space are defined in the conversion process. In the ACR module of Elements, there is no dialog for you to choose between sRGB or aRGB. The settings in your camera are ignored. Instead, ACR reads your choice for optimization in that edit / color menu. The conversion menu adopts the color space in that menu.
So, that menu is mainly to define which color space will be chosen as 'working space' and what to do if that color space is not yet defined in the file metadata header.
The printer and paper color settings are not taken into account here, only in the print module.
Edit:
I forgot to mention that the same edit / color menu is there to provide ways to convert to another color space (converting the RBG values, not only assigning a color space tag).

Similar Messages

Communication between the DNS/DHCP Manager and OES Server

No communication between the DNS/DHCP Manager Console and OES server (status,start,stop)
The screenshot shows the tab "DHCP (OES Linux)" in the DNS / DHCP Manager console
in the bottom of the image it shows the state of the DHCP servers.
allDHCP.JPG
The dhcp service is started on all these servers
You can see that the status is known only for four servers.
The button "start/stop DHCP service" works fine on this servers and
the dhcp service can be canceled and also restarted
But the status of the "dhcp service" is not recognized for all the other DHCP servers
and so we can not start or stop dhcp service on these servers.
All servers were installed at different times (last three years) with OES11 and
are upgraded to OES11SP2 with all patches.
The server keto (DHCP_keto) is a new installation OES11SP2 few days ago.
All OES servers were set up identically from me. LDAP, LUM, DMS, DHCP works fine.
Which service on the OES server is responsible for
communication (status indicator) between the DNS/DHCP Manager and the OES serve?
How the status query is performed by the DNS/DHCP Manager?
How can I test the communication to the server on the client (console)?
Which configurationfiles I should be compare on the server?
Thanks in advance
Gernot

gernot,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Getting Error The trust relationship between the primary domain and the trusted domain failed in SharePoint 2010

Hi,
SharePoint 2010 Backup has been taken from production and restored through Semantic Tool in one of the server.The wepapplication of which the backup was taken is working fine.
But the problem is that the SharePoint is not working correctly.We cannot create any new webapplication ,cannot navigate to the ServiceApplications.aspx page it shows error.Even the Search and UserProfile Services of the existing Web Application is not working.Checking
the SharePoint Logs I found out the below exception
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:55.54 mssearch.exe (0x0864)                   0x2B24 SharePoint Server Search      Propagation Manager
fo2s Medium [3b3-c-0 An] aborting all propagation tasks and propagation-owned transactions after waiting 300 seconds (0 indexes) [indexpropagator.cxx:1607] d:\office\source\search\native\ytrip\tripoli\propagation\indexpropagator.cxx
11/30/2011 12:14:55.99 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    The SPPersistedObject with
Name User Profile Service Application, Id 9577a6aa-33ec-498e-b198-56651b53bf27, Parent 13e1ef7d-40c2-4bcb-906c-a080866ca9bd failed to initialize with the following error: System.SystemException: The trust relationship between the primary domain and the trusted
domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection
sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()
at Microsoft.SharePoint.Administration.SPAcl`1.Add(String princip...
11/30/2011 12:14:55.99* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    ...alName, String displayName, Byte[] securityIdentifier, T grantRightsMask, T denyRightsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider
persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
8xqx High    Exception in RefreshCache. Exception message :The trust relationship between the primary domain and the trusted domain failed.
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable The following error occured while trying to initialize the timer: System.SystemException: The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection
sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, Byte[] securityIdentifier, T grantRightsMask,
T denyRightsMask)     at Microsoft.SharePoint.Administrati...
11/30/2011 12:14:56.00* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable ...on.SPAcl`1..ctor(String persistedAcl)     at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()
at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid
id, Guid parentId, Guid type, String name, SPObjectStatus status, Byte[] versionBuffer, String xml)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(SqlDataReader dr)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.RefreshCache(Int64
currentVe...
Please guide me on the above issue ,this will be of great help
Thanks.

I have same error. Verified for trust , ports , cleaned up cache.. nothing has helped.
The problem is caused by User profile Synch Service:
UserProfileProperty_WCFLogging :: ProfilePropertyService.GetProfileProperties Exception: System.SystemException:
The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids,
Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, SPIdentifierType identifierType, Byte[]
identifier, T grantRightsMask, T denyRigh...
08/23/2014 13:00:20.96*        w3wp.exe (0x2204)
        0x293C        SharePoint Portal Server              User Profiles
        eh0u        Unexpected        ...tsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.Office.Server.Administration.UserProfileApplication.get_SerializedAdministratorAcl()     at Microsoft.Office.Server.Administration.UserProfileApplication.GetProperties()     at Microsoft.Office.Server.UserProfiles.ProfilePropertyService.GetProfileProperties()
Please let me know if you any solution found for this?
Regards,
Kunal

Error while adding a used relationship between the New DC and the Web DC

Hi Gurus
We are getting the Error in NWDS while Adding a used relationship between the New DC and the Web DC.
Steps what we are Done
1. Create the custom project from inactiveDC's
2.creating the project for the component crm/b2b in SHRAPP_1
3.After that we changed the application.xml and given the contect path.
4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
so, we skip this step and tried to create the build then it is saying that build is failed..
Please help us in this regard.
Awaiting for ur quick response...
Regards
Satish

Hi
Please Ignore my above message.
Thanks for ur Response.
After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the projects was also sucessfully done and EAR file was created.
We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
When i right click on my activity Id the deployment summery is also disabled.
So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
Any pointers in this regard would be of great help..
Awaiting for ur valuble Responses..
Regards
Satish

PS-Relationship between the system status in wbs elements and activities.

Relationship between the system status in wbs elements and activities.
We have the following requeriment with the system status in PS. We have a project with complete technically status and we want to undo the complete technically status in one activity without changing the complete technically status in the WBS element or the project.
The reason is that after putting the complete technically status, users have to change the values in the P.O. We don´t want "open" all the project and we only need to "open" the activity where the P.O. are in.
Is that possible? How is connected the system status between activities, wbs elements and the project son I can change the status in the below step without changing the higher steps?
Thanks in advance.

Hi Bala
Yes, you have put it rather correctly.
We use WBS elements for booking and posting time (client requirement). So what I am looking for is WBS Elements with the system status TERL (Time and Expense Released).
I talked of the deletion flag also, because a WBS element flagged for deletion can't be used. It's one of the criteria to screen the WBS elements.
I hope it's clearer now.
Vinitha.

Relationship between the "Stage" and the "preLoader"

Other than the "preLoader" loading the project what is the relationship between the 2 elements in the project. Is the "preLoader" on the stage? is there a "stage" for the preloader ?
In css markup in my html file to I need to deal with them seperately if I want to move there loaction?
I use...
sym.$("#Stage").css({"margin": "auto"})
in compReady to center my stage. I tried do this with the preloader but it doesn't work. The stage is centered but the preloader off to the left. Is there some code I can add to the project so my preloader will allways center in the same location where my stage is placed?
If I'm using html css markup to place my "stage" how do I address the preloader so it's goverened by the same markup ?
Also maybe this should be a seperate post question, but how would i add a timer to report preload times to the console ?
Thanks
Joel H

That doesn't work all the time and sometimes it works with stage but not the preloader, especialy if I want to center vertically also like
<style>
#Stage {
        width:350px;
        height:350px;
        position:absolute;
        left:50%;
        top:50%;
        margin:-175px 0 0 -175px;
</style>
this doesn't work. But if I apply the same markup to a wrapper div it does work. like
<style>
#StageWrapper {
        width:350px;
        height:350px;
        position:absolute;
        left:50%;
        top:50%;
        margin:-175px 0 0 -175px;
</style>
then in the <body>
<div id="StageWrapper">
<div="Stage" class="EDGE-blah-blah">
</div></div>
this works great, you just can't open your html file in edge again cause it screws your project all up.
I was just wondering why if I was centering my stage with js in the project file why the preloader wasn't doing the same thing or how to do the same thing with js in the project file
thanks
Joel H

What is the relationship between the SAP BC and XI?

Hi Friends,
What is the relationship between the SAP BC and XI?
Regards
Sam

Hi Samuel Melvin ,
The SAP BC is basically WebMethod's product supplied free of charge to SAP customers.
SAP XI is a purchased product from SAP that can be used to integrate multiple systems, you would need to contact your SAP Account rep to discuss licensing issues. You cannot download it for free from sapnet.
It is probably more relevant to discuss the comparison between these solutions based on a specific scenario, but here are some basic differences. Obviously, the foremost one being that the SAP Exchange Infrastructure (XI) belongs to the SAP Netweaver technology suite, whereas Business Connector although bundled by SAP is really a Integration tool provided by Web Methods.
Being a Netweaver solution the SAP XI is central in design and configuration. The SAP XI is really integrated as a required solution for some of new mySAP solutions like SRM. For example, the mySAP SRM business scenario for Supplier Self Services in EBP requires the implementation of SAP XI, the Business connector cannot be utilized to replace this scenario. Although the SAP Business Connector can still be utilized with SRM for all XML based communication. Both mySAP SRM and XI runs natively on the SAP WebAS Server.
The Business Connector is a point to point solution that provides messaging and routing. Currently a number of organizations using the Business Connector utilize it to communicate between its partners using XML based messaging. This can be achieved using SAP XI as well, but SAP's strategy is to utilize XI as a central hub for messaging, routing, and communication between all SAP, non-SAP systems as well as partners. As SAP XI is a relatively new solution, organizations that are looking for communicating with their partners to exchange XML based documents or other point-to-point scenarios can still utilize SAP Business connector.
Initially, when SAP announced the SAP XI, there was a notion that SAP Business Connector would be phased out and SAP XI would be the solution utilized hereon. But SAP will continue to support the Business Connector, the SAP Exchange Infrastructure will remain as the SAP's strategic integration solution. All new and or updated SAP solutions will make use of the XI for all process-centric, message based integration. As upgrades are scheduled and new solutions deployed we'll see the mandated need for XI but currently the only solution that natively requires SAP XI is mySAP SRM 2.0.
It will be interesting to see how organizations that already utilize SAP Business Connector warm up the SAP XI idea. But for the most part they will not have a choice really, as the new mySAP products are going to natively require the use of SAP XI for all process-centric integration between the different SAP solutions. But there is no reason why organizations cannot continue to utilize the SAP Business Connector for all point-to-point solutions already deployed with possibly document exchange and partner integration. Hope this helps.
These web-sites may help u in understanding XI & BC
Understanding SAP XI SEEBURGER
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
http://www.t2b.ch/Flyers/t2b%20SAP%20Xi%20Flyer.pdf
SAP Exchange Infrastructure (BC-XI)
http://help.sap.com/saphelp_srm30/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/content.htm
webMethods for SAP
http://www1.webmethods.com/PDF/webMethods_for_SAP-wp.pdf
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
cheers!
gyanaraj
****Reward points if u find this helpful

The relationship between SAP BusinessObjects XI 4.0 and WebIntelligence 6

A lot of APIs in Rebean\ Report Engine Java SDK are disfunctional in BI 4.0 and there is no replacement.
[Rebean Developer Guide|http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_resdk_java_dg_en.pdf] say:
SAP BusinessObjects XI 4.0 release, the Report Engine SDK does not support the following features:
u2022 Drilling in Web Intelligence documents
u2022 Building queries
u2022 Document and report editing
in [BI 4.0 Javadoc|http://help.sap.com/javadocs/bip/40/re/en/com/businessobjects/rebean/wi/package-summary.html]
there are a lot of javadoc with warning Warning: This interface is no longer functional from the SAP BusinessObjects XI 4.0 release onwards
I found another [Java doc for WebIntelligence 6.x|http://help.sap.com/javadocs/boe/xi/re/en/overview-summary.html].
http://help.sap.com/javadocs/boe/xi/re/en/overview-summary.html
This documentation covers the REBean Java SDK. The REBean SDK allows you to work with ** documents and explore the metadata layer.
not supported by 4.x,but supported by 6.x?
what's the relationship between SAP BusinessObjects XI 4.0 and WebIntelligence 6.x?
What version of WebIntelligence used by SAP BusinessObjects XI 4.0 ?

Web Intelligence 6.x is an old product that is currently out of support.
Crystal Enterprise 10 and BusinessObjects 6.5 were the last separate Crystal / Web Intelligence products just after BusinessObjects acquired Crystal Decisions. BusinessObjects XI was the successor to both CE 10 and BO 6.5.
It just so happens that the product name was carried over from the BusinessObjects side, but the versioning brand was carried over from the Crystal side. So 6.x doesn't mean a newer version of ReportEngine. Timeline:
ReportEngine 6.x -> ReportEngine 11 (XI R1) -> ReportEngine 11.5 (XI R2) -> ReportEngine 12 (XI 3.x) -> ReportEngine 14 (BI 4.x).
So you can see the evolution of the branding that led to the newest version being branded by the number 4.0.
The internal APIs being wrapped by ReportEngine was changed from 12 to 14, and thus not all functionality was carried over to 14.
Sincerely,
Ted Ueda

What is the difference between the new 13" MacBook Pros and the previous version of the 13" MacBook Pro? I purchased an "old" one from Best Buy the day before the announcement of the new models.

What is the difference between the new 13" MacBook Pros and the previous version of the 13" MacBook Pro? I purchased an "old" one from Best Buy the day before the announcement of the new models.

See the specs:
Compare Notebooks - Apple Store (U.S.)
Compare with your model. If you are within 14 days of purchase you can exchange for the new model for the difference in price, if any. Be sure to have all the original packaging and your receipt.

Re: What is the relationship between the JTA Server Timeout and

Two things. The transaction timeout is set when the transaction starts. When are you setting the timeout, and where are you starting the transaction?
          There is a bug in 6.0 SP1. The EJB subsystem always sets the transaction timeout. If you don't specify anything in your descriptor. It sets the timeout to 30 seconds. However, if you
          change the JTA default to 60 seconds, the EJB container won't see this change. This is fixed in our next minor release.
          -- Rob
          Tom Gerber wrote:
          > What is the relationship between the JTA Server Timeout and an EJB's <transcation-timeout-seconds> parameter?
          >
          > Does the EJB's timeout have to be >= the servers to take effect?
          >
          > We tried setting the timeout in the XML file to 60 seconds but the transaction still timed out after 30 seconds or so which makes me believe the server timeout overrides the EJB's timeout.
          >
          > Is this correct behavior?
          >
          > We are on WL 6.0 sp1
          >
          > Thanks
          >
          > Tom


Sorry, you cannot query for known bugs yet.
          Work is in progress :)
          Kumar
          Tom Gerber wrote:
          > Is there a place on the WebSupport site for WebLogic that I can query
          > for know issues for WL 6 sp1?
          >
          > I tried the Find Solutions but didn't find much.
          >
          > Thanks
          >
          > Rob Woollen wrote:
          >
          > > Two things. The transaction timeout is set when the transaction starts. When are you setting the timeout, and where are you starting the transaction?
          > >
          > > There is a bug in 6.0 SP1. The EJB subsystem always sets the transaction timeout. If you don't specify anything in your descriptor. It sets the timeout to 30 seconds. However, if you
          > > change the JTA default to 60 seconds, the EJB container won't see this change. This is fixed in our next minor release.
          > >
          > > -- Rob
          > >
          > > Tom Gerber wrote:
          > >
          > >> What is the relationship between the JTA Server Timeout and an EJB's <transcation-timeout-seconds> parameter?
          > >>
          > >> Does the EJB's timeout have to be >= the servers to take effect?
          > >>
          > >> We tried setting the timeout in the XML file to 60 seconds but the transaction still timed out after 30 seconds or so which makes me believe the server timeout overrides the EJB's timeout.
          > >>
          > >> Is this correct behavior?
          > >>
          > >> We are on WL 6.0 sp1
          > >>
          > >> Thanks
          > >>
          > >> Tom
          > >

Where to find the information regarding relationships between the tables?

I am developing a Windows based app which among other things lets users view SAP table schema and relationships.
If I use SAP GUI and dig up a bit on say the MARA table I can see that
Material Master (MARA) is related with
1) MaterialDescription (MAKT) on columns MANDT and MATNR
2) MaterialPlantData (MARC) on columns MANDT and MATNR
and so on
My question is - in which table the information regarding relationships between the tables is stored? There must be a data dictionary table which would be storing the relationships data. Which is it? Note: I will programatically access the table, NOT from the UI.

Thanks a lot...
I am still working on it, but here are the current findings. DD05S, DD08L and DD08T: The schemas for these tables were very promising for the thing I was looking for. Unfortunately the data within dose not seem to serve my exact purpose.
I found another one DD26S, which has almost 90% of the relationships I wish to explore. Do you know what is it supposed to contain?
Thanks a lot for your help.
Message was edited by: Salil Khedkar

Multiple relationships between 2 tables in report model

if i have 2 relationships between the same two tables. how do i use one over the other?
for example, i have 2 tables order and ordeDate table , with the definition of:
order table:
orderid int,
qty int,
orderdate date)
and orderDate table:
(id int,
endOfDay date,
endOfMonth date)
i created one relation ship as orderDate = endOfDay and anothe relationship as orderDate = endOfMonth. some of my reports would need to use the relationship between orderDate = endOfDay and the month end reports would need to use yhe relationship between
orderDate = endOfMonth. How do I select one relationship over the other when building the report?
Ideally the database should have been redesigned, which cannot be done at the moment as this will be done on the next project

Your table design is completly wrong. I am now sure how you are maintaining OrderDate table. SQL Server is RDBMS. Without relation how will you pick those rows from Order table whose order date is equal exactly equal to datefield in OrderDate table. The
only way is to derived endofDay and endofMonth in the select query directly. I understand endofMonth. But what is EndofDay ? And that too a date datatype ??
You can run the below query but it will not return specific order date from order table,
SELECT * FROM [ORDER] WHERE
CONVERT(CHAR(10),ORDERDATE,101) IN (SELECT CONVERT(CHAR(10),endOfDay,101) FROM ORDERDATE)
SELECT * FROM [ORDER] WHERE
CONVERT(CHAR(10),ORDERDATE,101) IN (SELECT CONVERT(CHAR(10),endOfMonth,101) FROM ORDERDATE)
Even if i JOIN the two table by orderdate and endofDay/endofMonth, we will not received specific orderDate. And this is becouse if your Order table contains multiple orderDate that are matching to either endofDay or endofMonth, the final output will contain
multiple orderDate details. I don't think this is what you need. Therefore you need to modify the OrderDate table or provide us the definition for endofDay and endofMonth, and how are you maintaining.
Regards, RSingh

A significant difference between the metrics captured at Proxy and BS level

Context: -
          Currently we have following set up for a particular OSB project.
AccountManager
          Interface …… (this has all the schemas and wsdls)
          Services
               AccountManagerProxy… (Proxy service)
               AccountManagerBS … (Business service)
AccountManagerBS – is configured with end point URL to interface with back-end system.
AccountManagerProxy – includes a ‘Route to’ action for linking to AccountManagerBS as given below
The performance monitoring is enabled at AccountManagerProxy and AccountManagerBS level.
Test Scenario: - I am running a simple load test for AccountManager and checking performance metrics from OSB dashboard.
Expected behavior: - The performance metrics at proxy and at BS level should not differ more than few milliseconds (10-50 msec)
Problem Statement: - I am seeing a significant difference (like 40 to 50 seconds) between the metrics captured at proxy and BS level.
     As an example, the number at proxy level is “1 minute 20 seconds” and the number at BS level is ‘500 milliseconds’
     Moreover, this behavior is not consistent. It has started showing this behavior in last few days. The further impact of this is ‘stuck threads’ on webLogic server and hence the high possibility of memory outage. I have already restarted the Admin/managed-1/managed-2 servers couple of times.
Can anyone help me understand and identify the exact problem area for this issue?

does your proxy do any authentication with any 3rd party auth providers ?
Also in proxy service monitoring are you seeing all time at route node ? .. is the business service request type different that the contents of $body before the route? .. there could be some implicit transofmations if yes...

How do I turn off the printer colour management in printer drivers on my photosmart C7280

photosmart C7280
How do I turn off the printer colour management in printer drivers

HI whcotton,
You can click here to go to a post for help with disabling the printer color management for your printer. This person was having the same issue as you and the accepted solution worked for them. Hope you find this helpful.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Difference between the design of clusters PCLx and others like RFBLG etc .

There are a few nagging questions which I was not able to find in the forum hence i have to post a new question.
I am a little confused about the difference between the different clusters .
If i start with RFBLG i.e. the cluster for BSEG BSEC etc ,I can see that the tables which are part of this cluster
can be viewed through different methods like
1) whr usd list for RFBLG
2) dd02l table and give the required parameters there
now when I compare this with another so-called cluster PCL1 if find that PCL1 is not recognized as a cluster
and also I am not able to see the same in dd02l table when i give PCL1 and the tabtype as cluster which I was able to see
for the RFBLG ,there are other tables similar to RFBLG .
1) SO what is the difference between the RFBLG type of clusters and the PCLx type of cluster
2) are pclx and rfblg..type of clusters same ?
3) why does PCL1 shows that it is a transparent table ? where as rfblg shows in a diff way in se11
4) i know we access data from PCL1 using import and export stmts ,DO OR CAN WE DO THE SAME FOR RFBLG
5) I found that each and evry cluster table had diff fields ,this was kinda surprising for me as I had been thinking
that all cluster tables need to follow a certain rule ,SO WHO DECIDES THE FIELDS OF A TABLE CLUSTER ?
6) PCL1 has the index button enabled ,which again I think is not according to the cluster table rules?how?
7) I understand that we can save data in form of internal tables in the PCL1 cluster ,can we do the same in RFBLG ?
8) Can I think on lines that PCL1 and RFBLG type of cluster are two totally different types of data dictionary objects
and the usage and implementation of both of them is different and that the design and the BASE of both of such objects
is different .
I know this is a long list but I am sure that answers to these questions would really require some one who has really really work hard and invested a lot of time in understanding the dictionary system.I am awaiting a few answers ,few hints and a healthy discussion till we get them .
Thanks ...
a

Hello,
1/
BSEG is a typical Cluster Table.
This means that the physical table BSEG does NOT exist in the database, physical data for BSEG is stored in the database (table) cluster RFBLG.
In ABAP however you can perform selects on BSEG (with all fields from the SAP repository structure, see SE11 on BSEG), during execution the SAP database layer will translate these statements to physical selects in the RFBLG database table, so in ABAP this is transparant.
More info :
[http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm]
2/
PCL1, PCL2, ... are normal SAP transparent tables, however in HR they are often called HR cluster table.
Transparent tables are SAP objects where there is also a database table with the same name that contains the physical data.
However the PCL tables are somewhat different from normal transparent tables (data is compressed, external programs can not interpret the data, ...).
This means that in ABAP you can not use simple SQL statements to access data in PCL tables (because of compressed format).
In stead statements like EXPORT TO DATABASE and IMPORT FROM DATABASE need to be used.
More info :
[http://fuller.mit.edu/hr/cluster_tables.html|http://fuller.mit.edu/hr/cluster_tables.html]
Wim

Relationship between the Koren Colour Management Model and PSE11

Similar Messages

Maybe you are looking for