Relationship between the "Stage" and the "preLoader"

Other than the "preLoader" loading the project what is the relationship between the 2 elements in the project. Is the "preLoader" on the stage? is there a "stage" for the preloader ?
In css markup in my html file to I need to deal with them seperately if I want to move there loaction?
I use...
sym.$("#Stage").css({"margin": "auto"})
in compReady to center my stage. I tried do this with the preloader but it doesn't work. The stage is centered but the preloader off to the left. Is there some code I can add to the project so my preloader will allways center in the same location where my stage is placed?
If I'm using html css markup to place my "stage" how do I address the preloader so it's goverened by the same markup ?
Also maybe this should be a seperate post question, but how would i add a timer to report preload times to the console ?
Thanks
Joel H

That doesn't work all the time and sometimes it works with stage but not the preloader, especialy if I want to center vertically also like
<style>
#Stage {
        width:350px;
        height:350px;
        position:absolute;
        left:50%;
        top:50%;
        margin:-175px 0 0 -175px;
</style>
this doesn't work. But if I apply the same markup to a wrapper div it does work. like
<style>
#StageWrapper {
        width:350px;
        height:350px;
        position:absolute;
        left:50%;
        top:50%;
        margin:-175px 0 0 -175px;
</style>
then in the <body>
<div id="StageWrapper">
<div="Stage" class="EDGE-blah-blah">
</div></div>
this works great, you just can't open your html file in edge again cause it screws your project all up.
I was just wondering why if I was centering my stage with js in the project file why the preloader wasn't doing the same thing or how to do the same thing with js in the project file
thanks
Joel H

Similar Messages

Creating a relationship between one table and the PK in another

Sorry the subject of this message is a bit vague. I'm not sure how to describe this problem in one sentence.
So here's the issue: I've just created a new block on my form based on table2. Table2 contains t1_id which is the FK link to Table1.
What I want is when one of the fields in Table2's block is changed and inserted, the t1_id is inserted in the applicable row. Essentially, I need :table2.t1_id to have the 'Copy From Item' property set at :table1.id
I cannot seem to see where in designer this option is. I asked a friend and he said what I need to do is 'create a relationship between the two values in designer'. Huh? In the Table Definitions the FK is set for the two, so I'm not sure how to do this.
Another problem, which I'm believing will be solved when this is, is that when the form loads, this new block, table2, is not automatically populated with the applicable values from the table.
Thanks for any help. It's greatly appreciated!

Do you mean that you want to create a Master-Detail Form using Designer?
If yes, you need to define the entity usage from the Function Hierarchy Diagrammer, then attribute usage definition. Generate the module using Application Design Transformer. You need to define the Context so that master table's PK will be carried over to the detail table.

Sharepoint foundation 2013 "The trust relationship between this workstation and the primary domain failed"

Hi Sir/Madam,
I try to connect the sharepoint foundation 2013 server by remote desktop recently using domain account, but it show the error message that mentioned in the subject. I can login the server using local account. Do I need to disjoin
the domain then rejoin the domain? Will there be any risk if I do this?
My SharePoint environment as below:
Primary domain : abc.local (DC : windows server 2012 standard R2)
SharePoint : SharePoint foundation 2013 and SQL Standard 2012 installed on a single windows server 2012 standard (not R2, joined domain "abc.local)
I tried this on DC > active directory user and compouter >right click Sharepoint pc > click reset > reboot sharepoint server, reboot sharepoint server but still cannot login using AD account
I also tried netdom command and powershell command "Reset -ComputerMachinePassword" also failed to reset the password.
Please help to resolve my problem. Thanks
Jeffrey

Go to Control Panel -> System -> under Computer Name, Domain, click Change Settings. Click on the Change button, then re-type the domain in the NetBIOS or FQDN format, which ever it is currently not set to. This will force a soft-join to the domain.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Table having the link between Clearing document and the Invoice document

pls can someone tell me the table that having the relationship between clearing document and the Invoice document.
Thanx .

Hi,
You can try with the following tables: BSE_CLR, BSEG, BSAD, BSAK.
Regards,
Svetlin

How to create the relationship between ESSBASE 11 and DM in OBIEE11

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the relationship between ESSBASE 11 and DM in OBIEE 11G?

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

Question the relationship between AR invoice and Outgoing payment

Dear All,
Does anyone the know the the relationship between AR invoice and Outgoing payment? because I would like to print the report in specific date range. For example, today is 02 July 2009. I want to print "AR invoice as at 31 Mar 2009", by using SQL. It seems like date back.
From Samson

Hi Samson,
Even i haven't done much r n d bout this but what i came to know is that, there might be a scenario where you may want to make a payment to your customer. In this case we can use the Outgoing payment for the same. The system doesnt stop you from doin so. I have seen this in SAP B1 2005B, PL34.
Regards,
Joseph

In which table we can find the relationship between Role id and Task id

Hi Experts,
In which table we can find the relationship between Role id and Task id in Cprojects.
Thanks
Subhaskar

Hi Subhaskar,
Apart from DPR_ENTITY_LINK , you can also get it from table DPR_PART.
Please go through the below link
http://wiki.sdn.sap.com/wiki/display/PLM/cProjectstablesin+SAP
I hope this will help you.
Regards,
Rahul

The relationship between production order and purchase requistion After running MPS

Dear Experts:
I met a issue . My users want to know the relationship between production order and purchase requistion . In my company we create production order and purchase req. by running MRP. our operations are:
1. T-CODE: MD41 create planned order .
2. T-CODE: CO41 convert planned order to production order .
3. T-CODE: MD15 convert planned order to purchase Requisition.
but I can't find the relation of them. would you like to give me some advices? thank you very much.

Hello
On the standard MTS process there is no link between the requirement (STO) and the replenishment element (production order).
See the below extraction from note 12955:
There is no index that the system could use to determine which issue element (sales order, planning, reservation, dependent requirement, ...) is covered by a certain receipt element (purchase order, production order, purchase requisition, planned order, stock level ...).
A production order, for example, can be created to cover several different requirements, even when you are using lot sizing procedure EX.
You can use transaction MD09 or MD04to determine the pegged requirements, but they are calculated dynamically and there is not fixed link between requirement and receipt.
BR
Caetano

How would i design the relationship between "question", "subquestion", and "answer"

Hi all. Consider the following scenario:
Scenario:
A Question has an Answer, but some Questions have Subquestions. For example:
1. Define the following terms: (Question)
a) Object (1 marks) (Subquestion)
An instance of a class. (Answer)
b) ...
2. Differentiate between a constructor and a destructor (2 marks)
(Question)
A constructor constructs while a destructor destroys.
(Answer)
Question:
I want to model Questions, Subquestion, and Answer as Entities with relationships/associations, preferably binary relationships as i feel ternary relationships will be problematic while programming. Any suggestion on how i would
go about this?
There is never infinite resources.
For the Question Entity, a question has the attributes "QuestionPhrase <String>", "Diagram<Binary>", and "Marks
<Decimal>".
For the SubQuestion Entity, a subquestion has the attributes "SubQuestionPhrase <String>", "Diagram<Binary>", and "Marks <Decimal>".
For the Answer Entity, an answer has attributes, "AnswerPhrase<String>", "Diagram <Binary>"

Yes. I am in .Net. I sure do hope i did not ask in the wrong forum. :-|
Hi KCWamuti,
If you need to design the relationship between Question table and Answer table in SQL Server, as Uri’s and Visakh’s posts, you can create the foreign key to establish relationship between tables, and use join in query to get your desired result. For more
information about JOIN in SQL Server, please review this article:
Different Types of SQL Joins.
However, if you need to model Questions, Subquestion, and Answer as Entities in .Net, then the issue regards data platform development. I suggest you post the question in the Data Platform Development forums at
http://social.msdn.microsoft.com/Forums/en-US/home?category=dataplatformdev . It is appropriate and more experts will assist you.
Thanks,
Lydia Zhang

What is the relationship between CGI-Executables and cgi-bin?

I am trying to get CGIs working locally on my Mac and am having difficulty understanding the relationship between CGI-Executables/ and cgi-bin/.
I have activated CGI in my httpd.conf file, and have the following perl test script: /Library/WebServer/CGI-Executables/test.cgi file, and have the file permissions set appropriatly
If I call the script from the actual url: http://127.0.0.1/CGI-Executables/test.cgi, it doesn't work. If I use: http://127.0.0.1/cgi-bin/test.cgi, it works fine.
Why cgi-bin and not CGI-Executables? What is the relationship between /Library/WebServer/CGI-Executables/ and cgi-bin?
And how do I get CGIs working in individual users' Sites/ file? Do all CGIs go in the /Library/WebServer/CGI-Executables/ directory, or can each users' Site/ directory have it's own cgi-bin?
Ti Powerbook G4 Mac OS X (10.4.4)

Now I am having trouble getting CGI to work in the user directories. I have a perl script that works for 127.0.0.1/cgi-bin/test.cgi, but not for 127.0.0.1/~joe/cgi-bin/test.cgi.
My apache error log says:
[Tue Feb 14 08:14:23 2006] [error] [client 127.0.0.1] Options ExecCGI is off in this directory: /Users/joe/Sites/cgi-bin/first.cgi
Permissions for Library/WebServer/CGI-Exectuables/test.cgi and /Users/joe/Sites/cgi-bin/ are 777.
I think the problem is somewhere in my directory configs. Apache has so many, it's hard to know what's what.
Here's the first directory directives in httpd.conf:
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride Options
</Directory>
Farther down, there's this, which I added ExecCGI and index.cgi:
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
<Directory /Users/*/Sites>
AllowOverride FileInfo AuthConfig Limit
Options MultiViews Indexes SymLinksIfOwnerMatch Includes ExecCGI
DirectoryIndex index.html index.cgi
<Limit GET POST OPTIONS PROPFIND>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS PROPFIND>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
Then down at the bottom of the file is something I suspect was added automatically when the user account was created:
Include /private/etc/httpd/users/*.conf
<Directory "/Users/joe/Sites/">
Options Indexes MultiViews Includes
AllowOverride None
Order allow,deny
Allow from all
</Directory>
To further confuse things, there is another file /etc/httpd/user/joe.conf that has additional user-directory directives:
<Directory "/Users/joe/Sites/">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Is there something in all these directory configurations that is preventing the user from accessing cgi-bin? Can I add directives to an .htaccess file in the user directory.
Ti Powerbook G4 Mac OS X (10.4.4)

What is the Relationship between Update Rule and Infopackage/Transfer Rules

Hello Experts,
can you help explain these scenarios to me:
What is the relationship between update rules and infopackges?
What is the relationship between transfer rules and infopackges?
What is the relationship between update rules and transfer rules?

Hello,
Info-packages trigger the data load into BW system from the source system. An info-package is created for a specific data source and info source combination.
1) When you trigger the info-package it sends an request to the source system to start the extraction process and this corresponds to the step "Data Request Received" in monitor under details tab. It is the first step.
2) Then the selections specified in the info-package are transferred to the source system to select the requested data from BW system. Then it is sent back to BW system.
3) Once it reach BW, it gets into the PSA and then it gets updated into the data target (depends on what settings are made in IP). No rules (Transfer rules / update rules) comes into picture when data is stored in PSA. Only the transfer structure is used to map the BW info-objects with the source system fields.
4) After data is stored into PSA, the update into the data targets begins. First the transfer rules are applied -> data then flows through the communication structure -> update rules are applied and finally the records gets updated into the data target.
The extraction flow is: -
Source System (DS) -> PSA -> Transfer Rules -> Communication Structure -> Update Rules -> Data target.
Info-package actually triggers the whole data flow in BW system.
Hope it gives you a clear picture.
Thx,
Soumya

Please explain the relationship between sequence setting and output

I am looking for an explanation of the sequence setting and the output settings (Mac Quad core, 10.7.4 - CS6 Production Premium, PR) I am primarily working in AVC-I 100 and XDCam. I've found that I can drop in AVC-I into a Seq and it will set the Seq to that codec. Many times I'll need to send the in-progress and final edits to my clients as an WMV (HD) video file. In FCP, I would export the self contained seq and use Episode to transcode to wmv. I'm having trouble understanding the best way to do this in PR (CS6). I've found that if I leave the Seq setting to the AVC-I, the render and the file output is a 50% quality mpeg-I. Is it best to set up a custom sequence w/ ProRes as the render codec? I'm having a hard time finding or getting an explanation of best practices for this type of operation. Any guidance would be appreciated.
Thanks,
jim

Remember I said you could force Pr to use your rendered preview files instead of the source media for export? Selecting Match Sequence Settings in the Export Media dialog is how you force it. Don't do that. And don't shoot the messenger -- I've lobbied against that label for that control for 2 versions now.
Some Export formats, like H.264 Blu-ray and MPEG2-DVD, have an available Preset called "Match Source Attributes". If you choose that Preset, you get something like this:
For details on setting up a sequence, see the Help files:
http://help.adobe.com/en_US/premierepro/cs/using/WS3E67AF4C-B2A2-4f04-90B4-F8CCFB74B144.ht ml#WSd79b3ca3b623cac941d41a681247d1f35a4-7fff
Jeff

How to get relationship between two views in the reports

How to get relationship between two views in the reports, I am doing a deletion program , it is fully relates to views , how to get relationship between them in the reports

Hi,
Please explain your question in detail...what do you want to read ?
If you want to know about the navigation links between the views then you can use APIs like
wdComponentAPI.getComponentInfo().findInWindows("windowName").getViewUsageByID("Name").getNavigationLinks();
Iterate through the navigationLinkInfo from above collection and can read the other properties .
I haven't tried the above , but it should work !!!
Regards,Anilkumar

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

Relationship between the "Stage" and the "preLoader"

Similar Messages

Maybe you are looking for