Relationship Type field in Contact Person Relationship Web Ui

Hi
In SAP CRM we can differentiate a relationship using relationship type. This field is available in SAP GUI, in "Contact Person Relationship" category, whereas it is not present in Web UI screen for contact. In our project there is requirement to make it visible in UI also. Please help me in this regards.
Thanks & Regards
Hitsm

Hi Hitesh,
Since Contact Person is a very common relationship, it has been removed from the relationship type and has moved into an assignment block. Invariably whosoever is a contact person will come under that assignment block.
Regards,
Harshit

Similar Messages

  • BP relationship: validity period for contact person relationship

    Hi all,
    In CRM 4:
    I wish that the Rel category "has contact person" (BUR001) will have from...to-date (validity period).
    But even though view BUB020 is listed in the views of this category in Tx BUBA - the fields from...to...are not active when I create new contact person relationship in Tx BP.
    what is the problem?
    Thanks,

    Hi,
    Please go to transaction BUBN and in that one field group would be there called 'Relationship Category/Role Definition Category'.
    Select that and go to "Field Group--> Fields" and add the following two fields:
    Table                        FieldName
    BUS050DFLD           DATE_FROM_STR
    BUS050DFLD           DATE_TO_STR
    Dont check any of the check boxes like "input field" and "not a required field".
    Save it and come out and then again launch BP trx to get the desired result.
    This is how i solved my problem in CRM 4.0.
    Please let me know if you have problems.
    Regards
    Sidd

  • Validity range of contact person relationship BUR001 not changeable?

    Hi guys,
    Apparently it is not possible to change the validity range (Valid from and Valid to) of the BUR001 relationship.
    The suggested workaround is a Z-copy of the BUR001 in which it is possible to change the validity range settings. The problem with this 'solution' is the huge amount of partner determination which takes place on several placed within the system (e.g. partner determination procedures on activities, search functionality etc).
    What is the best way to use contact person relationships which can have a validity range?
    We are on a CRM7.0 system.
    All suggestions are highly appreciated!

    The answer to the above question:
    In CRM7.0 a flag is added to activate the time dependency on the BUR001 relationship:
    CRM_BUT050     Time Dependency: Contact Person Relationship
    This can be activated via the following path:
    Cross-application Components  --> SAP Business Partner --> Activation

  • Relationship Between ECC Customers (Contact Persons) and CRM BP

    Hello,
    I am new to middleware and need some help with the relationship between ECC customers/contact persons and CRM business partners.
    We are transferring via bdoc this information from ECC to CRM.
    Which bdoc types are used when transferring customers/contact persons? I believe it is BUPA_MAIN but am not too sure. How is the relationship between customer its contact person transferred? Is this done through BUPA_REL? I looked at the segment fields in SBDM but am not too sure how to understand the relationship...
    Thanks for the help!
    Regards,
    Tiffanie

    Thanks! With the initial load, how do I check what fields are being passed in the bdocs?
    I tried to look for customer_main, customer_rel in SBDM  and couldn't find it. Instead I used BUPA_MAIN and found some segments but couldn't find all the data that was being transferred (e.g. customer name, address, etc...) Where do I find all the fields contained in the bdoc?
    I see them in SMW01 when I view the bdoc contents but can not find the actual structure (data fields) that are being brought in from ECC.
    Thanks!
    Tiffanie

  • Contact Person Relationship not displaying in webUI

    Hi,
    I am facing an issue while creating the Contact Person relationship in webUI. It is displaying in back end (GUI) drop down box, but its not displaying in web UI dropdown box. All other relationships are displaying well in UI.Please suggest to overcome this.
    Bob

    HI! Bob,
    I am in a fix, actually i cant upgrade to sp004(presently in sp002) because it probably would also affect compatibility with other servers  as i am using NWDI TREX IPC, so it is not posible for me to upgrade to SP004............
    I am still looking forward if you can provide me any help in
    If you require to see also contact person-relationships
    in "Relationships", you need to eliminate the filtering in BOL
    (class CL_BUPA_IL_RELATION->FILTER_RELATIONSHIPS). By creating a new
    implementation class (i.e. ZL_BUPA_IL_RELATION with superclass
    CL_BUPA_IL_RELATION) and entering this class in viewcluster
    CRMVC_BUIL for external object BuilRelationship), you can redefine
    method FILTER_RELATIONSHIPS and implement logic according to your needs
    I am not able to apply the above solution, as FILTER_RELATIONSHIPS is a private method of the class CL_BUPA_IL_RELATION so how can i redefine it.
    Please help me out.............
    Thanks a ton
    Mayank

  • Contact Person Relationship to SP.

    Hi Experts,
    I am faced up with a situation; where if am removing a Contact Person relationship for a Sold to Party; the relationship to the another contact person gets deleted. Possible reason could be both the contact person are identical.
    Now, how can i identify whether both the Cont. Person are identical or not; even though GUID for both is different. Is there any field value that makes them identical.

    Hi,
    I have gone through your query. The question here is bit misleading. You have mentioned that when you delete the contact person relationship of a Sold to party, relationship to another contact person is deleted. No two contact persons can be identical in the system. Whenever you create a new BP in the CRM system, every one are unique in its own way with a New GUID and New BP number assigned to them.
    Even though they can remain as duplicate, but 2 contact persons cannot be identical which will lead to a scenario like you have mentioned here. In my opinion this cannot occur. If you elaborate further i can help you out.
    I hope this helps.
    Regards,
    Venkat

  • Problem with Contact person Relationship...

    Hi All,
    I got the following issue.
    "Contact person relationship already exists between partners &1 and &2...."
    For this, I have checked the Business partners, tables and GUID's in R/3 and as well as in CRM and checked BP consistency fix...
    I have seen change history also, this problem occured to BUPA_REL B.Doc type. While after doing the Synchronization also i am getting errors like  "BP already exists and Partner (GUID No) errors occured...
    Please advise regarding this issue...
    Thanks in Advance.....

    Hello,
    You are leaving an unmanaged object in the tree when the transaction attempts to commit. If you are going to persist a new VerticalUser, it must reference an existing or managed VerticalHommeArt.
    If the VerticalUser references a new VerticalHommeArt, either persist the VerticalHommeArt before or set the verticalHommeArt relationship to cascade persist
    Best Regards,
    Chris

  • Collection contact persons relationship in FSCM

    Hi All,
    Request your help in creation of Collection contact persons relationship in FSCM and find them in process receivables screen.
    We are not mantaining customer contacts in customer master. But only in FSCM
    What is the use of collection contact person if they donot show up in process receivables screen?..Please help. i want collection contact person to show up in "Get contact Person" list  in process receivables.
    Thanks - Donny

    Donnesh,
    If you dont record the contact person in the customer/ BP then it needs to be stored somewhere for it to be defaulted.
    The only way to do this is to add the name once in the process receivables screen and it will then stay there and also be copied through in to the create customer contact screen.
    You could look for a BAPI to load the name and number into the process receivables screen, but this would mean processing the customer via the worklist.

  • Deleting the Contact Person Relationship

    I am trying to delete the Contact Person relationship with a Business Partner.
    When I am trying to delete the realtionship it is giving out error saying Address is till being used and cannot be deleted.
    Any one has any suggestions for me

    We are facing the similar problem. Any luck in solving this issue of deleting the Contact Person Relationship.

  • Email Campaign Execution: Contact person Relationship

    Hi All,
    I created a target group which contains a list of Contact Persons. I am testing executing an email campaign against this target group.
    This contact person also exists as a relationship to a prospect.
    The email address maintained on the contact person master data may be different from the email address maintained on the relationship. Our end goal here is to execute the email campaing against the addresses maintained on the relationsip and not on the master data. When I execute the campaing, it sends the email out to the address maintained on the contact person master data. Do you know what I can do for it to pick up the email address maintained on the relationship? Is it standard CRM functionality for it to pick up the email address from the master data rather than the relationship?
    Any comments/help on this would be greatly appreaciated.
    Thanks!
    Kiran.

    Hi!
    I know that has been a while since you two resolved these question, but can someone give me a hint with this?
    I'm facing a similiar question... I need to send campaign mails to contact persons (to the relationships contact mails). But i can not see any B2B flag... Can someone please tell me where can i check this field? (I'm working with CRM 7.0 (and Webclient UI))
    Thanks in advance
    Inês
    Edited by: Inês Mendes on Sep 9, 2011 5:28 PM

  • Employees act on behalf of customers without contact person relationship?

    Hello - we have internal customer care employees that need to be able to support our ecommerce customers in WebChannel...is there a way for my employees to be able to do this without establishing a "Is Contact Person For" relationship between my employees and our ecommerce customers?
    We are running into problems with the volume of relationships required and, in particular, middleware/ECC seems very inefficient at processing this relationship data to the point of shutting down BP middleware traffic.
    Thank you - Matt

    Hi Matt,
    Internal employees can order/access B2B application without being a relationship maintained. This can be done through Business on Behalf application. this application can be accessed at htp://server:port/b2b_2/init.do. Once you have configured this application any employee can login into this application and order on behalf of customers. Once the order is created it will not create a relation ship with the employee.
    More information can be found under below link
    http://help.sap.com/saphelp_crm40/helpdata/en/ce/b8433ffb8b1f07e10000000a114084/content.htm
    Sateesh Chandra.

  • Central Person and Contact person relationship

    Hello Friends,
    I have HR replicated org.struct.where central user creation was active
    I maintained Table T77SO for local user creation
    HRALX  PBPHR  CREATE
    HRALX  PBPON  ON
    HRALX  HRAC      X
    Now i am able to integrate user thru users_gen in org.structure but system is not generation central person for the user
    I want to form the relation of this user as contact person of vendor , When i try to maintain it system is giving error user is not central person
    Please help
    Thanks in advance
    Diwakar Deshpande

    Hello Nishant,
    Thanks for your reply,we are using release 4.0
    We are not using workflows
    My org.structure is HR Replicated and
    we want to use Bidding functionality
    So i need to create contact person for vendor to login to reply BID
    This contact person has to be locally created in EBP and should be integrated
    in Org.structure so by maintaining switches i could do so by using users_gen
    but since system is not generating central person CP when i am trying to create
    contact person for vendor through "Manage Business Partners" its stopping with
    error "Central Person is not created for Business Partner"
    How to resolve this,please help
    Thanks in advance
    Diwakar Deshpande

  • BDoc Error - Specify Contact Person - BP Relationship.

    Hi Experts,
    I am having a BDoc with an error msg of "Specify Contact Person". I have checked the extended data of BDoc; it refers to a two BPs id and a Contact Person relationship. I have checked for the relationship between them; it exists.
    I am trying to re-process the BDocs but still they remain in the same error stage.
    Kindly suggest.
    Thanks,
    Chaudh.

    Hi,
    I have gone through your query.
    I hope the error is "Specify the name of the Contact Person". If the direction of the replication is from CRM to ERP and you have not filled any of the name fields for contact person here in CRM, this error might occur. Because in ERP system the last name field is mandatory.
    So you need to fill the Name fields here and check the Bdoc monitor.
    Regards,
    Venkat

  • Contact person Rel.ship Data not getting updated in B2B Web User Mngt

    Hi CRM Gurus,
    Need some help on Web User Management functionality.
    Sub: Contact person Relationship data not getting updated when we change the company (to wich contact person belong to) in ISA CRM 5.0 Web User Management.
    we are currently on CRM ISA 5.0 and using Web User Managment for our B2B scenario. New creation of users is working fine. But when we want to change the company (Sold to pary) for the existing contact person, the relationship data in CRM is not getting updated and the below are the details.
    Contact person No: XXXX (has a Relationship: "Is contac person for YYYY company in CRM)
    Company/Sold to Party: YYYY (has a relationship "Has contact person XXXX in CRM).
    When I chage the contact person's (XXXX) company  from  YYYY to ZZZZ,
    - Relationships of the new assignment for ZZZZ in CRM not getting updated.
    - Old Records in YYYY is not getting deleted (i.e. relationships.
    - There is No relationship data appear in XXXX.
    Appreciate any inputs on the same.
    Thanks,
    Rahul >>>

    Hi Rahul,
    I'd suggest you running a session trace / ABAP debugging to see if some information is not getting passed from the Java stack onto the ABAP stack. An alternate move would be to create a new OSS customer message.
    Cheers,
    Ashok.

  • Contact vs Relationship Assignment Block

    Hi All,
    I need little help understanding difference between Contact Assignment block and Relationship Assignment Block.
    Why does it required to add sales org in Contact assignment block?
    How can i configure so that i can add more fields like phone # , Email  etc.
    What is the purpose of Relationship assignment than... since we are adding contact as a relationship?
    Please help!
    Thanks

    Hi Amish,
    The contact person relationship has a sales area dependent data as there is view assigned to the contact person relationship.
    If you do not want the slaes area assignment, then you will have to copy the contact person relationship into a custom one and remove the views which are not needed by you.
    1. Navigate to the transaction BUBA.
    2. Copy the relationship category BUR001 into a custom relationship category.
    3.  Select the custom relationship category and click on Category -> Views
    4. Remove the views which you do not need.
    Best Regards,
    Vamsi.

Maybe you are looking for