Relative image path for image in textarea

I am trying to include an image into my textarea in my
Main.mxml file. The images fail to load, what is wrong with my
path?
My folder structure's is like this
scr->
_____Main.mxml
_____images->
_____________green-grass.jpg

Actually when I ran the program it worked fine, the only
problem was in the flex design view

Similar Messages

Is there a substitute tool path for "Image Adjustments Variations-" in Photoshop CS6 Standard Addition?

Is there a substitute tool path for "Image>Adjustments>Variations…" in Photoshop CS6 Standard Addition that brings similar results? I was used to using Image>Adjustments>Variations… in Photoshop CS4 Standard Standard Addition quite often. I upgraded to Photoshop CS6 Standard Addition to get the 64bit memory architecture compatibility on my Macbook Pro, booted in Mountain Lion. I see now that Photoshop CS6 Standard Addition has the "Image>Adjustments>Variations…" tool path removed.
I don't have Photoshop CS6 Extended, which has the all new Image>Adjustments>Variations… tool path. I only have Photoshop CS6 Standard Addition so, if anyone can share with me a substitute tool set that can give me similar results to using the old "Image>Adjustments>Variations…," I would appreciate it.

Thanks, R_Kelly.
You helped me to start exploring other tools in the Image>Adjustments Menu. "Image>Adjustments>Color Balance…" seemed to help me get the results that "Image>Adjustments>Variations…" used to deliver. "Image>Adjustments>Photo Filter>Warming Filter (85)" also got me to where I wanted to be in desired adjustments. I used to get the results I wanted in brightness, contrast, mid-tone adjustment, and color balance buy using just Curves, Variations, and Hue/Saturation. Now I'll use "Color Balance…" and "Photo Filter>Warming Filter (85)" along with Curves, and Hue/Saturation. I also have learned to use "Levels" some more to get the same effect as Adjustments>Variations…" I always thought there were more technically precise adjustment tools to get the same effect as "Image>Adjustments>Variations…" Adobe dropping Variations in Photoshop CS6 Mac version forced me to learn better image adjustment approaches for pre press color correction and image warming. I feel confident now to make Photoshop CS6 my prime-time work tool and move the Photoshop CS4 launch icon off of my Mac OS app Dock. Thanks again, R_Kelly.

Invalid Image Path - No image found at the path referenced under key "CFBundleIconFiles": iTunesArtwork

hi
Please tell me the answer for below message,
Invalid Image Path - No image found at the path referenced under key
"CFBundleIconFiles": iTunesArtwork.
M.Muthukumar

I resolved removing the iTunesArtwork from the Icons array in the plist.
The organizer doesn't show the app icon anymore, but now the upload process works and my app is in the
Waiting For Review
status.
Hope this helps
Agostino Cinelli

Relative path for images in RTF templates

Hi everybody!
When I insert an image in a RTF template, I put its path into the web dialog, in order to see correctly the picture when I open the report from the xmlp server, in this way: url:{"http://servername/analytics/res/Images/image.bmp"}
How can I make this path relative, in order to see the images even if the server name changes?
Thanks so!
Francesco

Hi Tim,
I am using BIP 10.1.3.3.2. I am able to access system variable CURRENT_SERVER URL.
Steps:
<?param@begin:CURRENT_SERVER_URL?>
<xsl:value-of select="$ CURRENT_SERVER_URL"/>
CURRENT_SERVER_URL is getting printed in BI Publisher. Value displayed is http://xx4697.xxx.co.in:9704/xmlpserver.
Now we are importing xsl into RTF template. File aaa.xsl is stored at [BIP_Installation_Directory\oc4j_bi\j2ee\home\default-web-app]
We have hardcoded the path for XSL in RTF. The path is <?import: http://xx4697.xxx.co.in:9704/aaa.xsl?>
As we want to set dynamic path we changed hardcoded xsl path to <?import: {$CURRENT_SERVER_URL}/../aaa.xsl?> but it is not working. Sometimes BIP is taking local path of MyDocuments folder and sometimes Desktop path. If I put that XSL file in MyDocuments folder or Desktop, it is working fine. But ideally it should refer [BIP_Installation_Directory\oc4j_bi\j2ee\home\default-web-app] path...
Thanks,
Amit D

Relative paths for images upset by forwarding requests

Hello World.
          I am using a web app deployed in Weblogic 5.1 with service pack 8.
          I have hit a problem which puzzles me. When I forward a request from
          one JSP to another (say from A to B) the web server seems to take the
          URLs of the images on the served file (B) relative to the path on the
          calling file (A). Here's a detailed explanation...
          Suppose I have a the web app structured as follow
          /oddApp/launch/A.jsp
          /oddApp/B.jsp
          /oddApp/images/tick.gif
          Page A simply stores its request URI and forwards its request to page B
          <jsp:forward page="/B.jsp" />
          Page B displays its requestURI, contextPath and servletPath. It also
          attempts
          to show three images
          <img src="images/tick.gif">
          <img src="../images/tick.gif">
          <img src="/images/tick.gif">
          When I invoke page B directly, the first image is shown, the others are not.
          When I invoke page A, it forwards to B and the second image is shown, the
          others are not.
          In each case the URI, contextPath and servletPath are correctly displayed
          with regard to page B.
          URI = [oddApp/B.jsp]
          contextPath = [oddApp]
          servletPath = [B.jsp]
          The URI in A.jsp is also correct (i.e. /oddApp/launch/A.jsp).
          The search for the images seems to be relative to the original URI (i.e. not
          the URI used to forward), which strikes me as daft. It means that page B
          must be aware of where it is being called from. It is perfectly plausible
          that
          relative paths which suit when called from one location are incorrect when
          called from another.
          I had thought that including the leadling slash (as shown as the third
          image)
          would cause the search relative to the document root (/oddApp/), but this
          appears not to be the case. The search is done relative to the root of the
          server not the web app.
          Adding jsp mappings in the deployment descriptor of the web app does not
          help (I had thought it a long shot anyway).
          Does anyone have any thoughts on this?
          PHiL


i face the same problem (WinNT, WLS6.0): my wep app has a contextRoot " root " which makes it react to the URL: http://host:port/root /: it is this folder which will be used as a basis by the Web server But in the jps I use a relative URL for images: / images/toto.gif : it works very well when I deploy my jsp out of a Web-app by setting a document.root to the weblogic web server.On the other hand, once deployed in a Web-app, images are not found because the default path of the browser is http://host:port, without the context root of the Web-app! In other words, my war has images/*.gif in its root but when /images/toto.gif is resolved in a jsp, as the relative URL is not prefixed by my context-root, the image is not search in the war! actually, if I type http://host:port/root/toto.gif, my image appearsany clues? an alias on the web server? a setting in web.xml/application.xml and their weblogic equivalent files?

Fixing the path for images in RoboHelp 8

I am rather new to Robohelp, so please forgive me if this has been addressed in another dicussion...I have been searching and cannot seem to find what I am looking to describe.
I am working in Robohelp 8, and creating a new help system by importing topics from a previous help system. The problem I am running into and I cannot see how to fix is that there are a couple of topics that have images where instead of the path for the image directed to a folder called "Images" in the main directory, it dumps the graphic into the project manager window when I import the topic. I tried viewing topics that don't have their images on the main project manager window, and comparing against the one that does, and I cannot see the difference. I have tried renaming the images and placing in the correct folders, and then inserting the images into the topics, but it still tries to look at the main folder and still dumps the image into the project manager.
Any help you can provide please share.

I am going to say yes (because it sounds like what I am trying to get at, but not sure).....I have tried deleting the images, and recreating, and then re-inserting into the topic, and they still go to the root of project. As I am going along, I am finding more and more.....so far there are 20 images that are doing this. However, I also just did what you mentioned and dragged it and put it under the topic. But I am still confused as to why I would need to do this for some topics and for other topics the images don't appear at all (meaning they don't show under topics or root of project), they are just linked through the folder on the main directory. Does this image help more?
Left of picture above: The folder directory has a folder called Images, and this is where all of the images were stored and are stored for the new project.
Middle of picture above: The topic Horizontal Command had an image in it "image20.gif", and it was at the root directory and as you suggested I moved to the topic. Also see the topic circled Expand and Collapse Folders topic has the image circled at the left within it.
What I am trying to understand is why would the graphic from the Horizontal command topic dump into the root of the project, while the image from the Expand and Collapse Folders topic not show on the root project or even within the topic listed. (Which is what I prefer for all topics).

Need to capture multiple image paths for responsive design when only one will be displayed at a time

I'm new to CQ and am having enough trouble following the documentation on image components as it is (why is there no master reference for all this?). I have a requirement where we need to capture three versions of an image and put the URLs into three attributes of a tag. The appropriately sized image will be selected via JavaScript based on the browser/device capabilities. I need to know how to capture those images when seemingly only one at a time can be dropped onto the page. Or perhaps there is a more CQ solution to this.

Hi,
You need to customize image component. I mean selected image is a asset in the repository and each asset by default has 3 rendtion generated when the image is uploaded in the dam.
For example when you upload image.jpg file into the DAM, standard workflow is launched and after a while inside the repository (see paths) are created following renditions:
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.140.100.png
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.319.319.png
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.48.48.png
This process can be customized by changing /etc/workflow/models/dam/update_asset.html workflow and modifing "Thumbnail creation" step by adding in the Process tab -> Arguments field new values for new rendition. So for example if you add there [400,400] new rendition will be created in the path
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.400.400.png
Next step is to customize jsp for image component. Using path to the drag and dropped image from a component attributes you can easily take all renditions iterating on the /content/dam/project/image/yourimage.jpg/jcr:content/renditions node and then set paths to all renditions in the tag attributes. Then like you wrote using js you can select proper rendition.
I hope that it hepls you.
Regards,
Adam

Defining virtual path for images to be visible without specifiying path(AS)

Hi,
I am running a report (Version 10g) which have an image (Read from file = yes) item with source "Function column" that returns an image name. Ex. "11.gif"
I am recieving an error that the applications server cannot find the image "11.gif"
Image 11.gif is stored in a directory on the Applications server "D:\photos".
Where should I add the directory path "D:\photos" so that the reports will view the image?
Thanks

No need to define a virtual path similar to what's done in forms 10g. An entry in the registry key 'REPORTS_PATH' is enough!

Pathing for Image Links - CS5.5

Hi, we currently have out InDesign file in a folder which the name can change but within that folder we have a subfolder called images under we always have our images so our image links which get populated from XML data always point to file://images/imagename.eps so normally no problem finding links. What we are looking to do is have other subfolders with different InDesign files at same level as images subfolder but be able to utilize same images. Is there a way to point to these somehow without knowing the entire path, just being able to go back to the images subfolder which would be be up one level from actual InDesign file. I know on websites, we are able to do some ../ type of stuff which would handle that but never tried to do in InDesign. Thanks, Joe

Hi MissJB,
Please try downloading Dreamweaver CS5.5 from the Direct Download Links available at : http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
But make sure you follow the important instructions on the page before initiating the download.

Retrive image path of image after cameraRoll addBitmapData

Is it possible to retrieve the image url of image which added to the CameraRoll via addBitmapData ?
Thanks,
Nimrod Sion

That doesn't have anything to do with retrieving the imagepath after adding to the camera roll sirdragoon....
The only thing I can think of for this is that 1) you cant trace back the path to the camera roll for iOS because of how closed their system is and 2)the android path would always be the same once you find out the initial path. I do not think actaully adding the image to the camera roll will return the path unfortunately. You will have to open up the browseforimage method and trace out the images path from the return mediapromise (For Android).

Change image folder for image resources

Hello all,
it’s been a while since I was last here.
Still working with wonderful Adobe Edge, yet trying to change some things here and there ;-)
I wonder if anyone tried to change the way Edge writes out the „var im='images/';“ (in the .js file) variable.
Since I’d like to do something like this:
* Adobe Edge: symbol definitions
(function($, Edge, compId){
//images folder
var im='images/';
var im_work='templates/Chart_'+ workChart +'/images/';
var im_next_work='templates/Chart_'+ nextWorkChart +'/images/';
to keep the source of the images (used from multiple compositions) flexible.
So that all compositions may use common images looking for them in the „image“ folder
but also specific images that depend on which composition is actually working (I achieve it by the way by using templates mustache.js).
I can do this comfortely after Edge wrote out the .js file but everytime I opened the animation again and save Edge overwrites it again
cancelling everything except „var im='images/';“ so that the variables disappear.
Is there a way to change this feature, so that different image folders could be used?
Any ideas?
Thanks a lot
Garavani

iWeb SEO lets you put any description in the alt tag for each photo on a page. (Note: this does not include photos on an iWeb photo page). This is the tag that search engines look for and use.
Click to view full size
OT

Full path for images automatically?

Hi -
We do HTML for emails (i.e. - viewed in an inbox NOT a
browser, per se) so every document I create needs to have the full
URL path. i.e. -
http://www.servername.com/images/picture.gif
The Site Definition (Advanced Tab) allows me to make my
images relative to the site root. But since my customers are
opening my HTML docs in their inboxes, that doesn't work.
I thought there was a way to make the entire URL appear in
the code for all images. Right now I do a Find/Replace at the end
of my process, but I would prefer it to be automated.
I hope this makes sense, and I hope someone has an answer for
me.
Jon

Unfortunately, no. I have informed the higher authorities,
though....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"HollandAmerica" <[email protected]> wrote
in message
news:e9m71a$rhl$[email protected]..
> Hi -
>
> We do HTML for emails (i.e. - viewed in an inbox NOT a
browser, per se) so
> every document I create needs to have the full URL path.
i.e. -
>
http://www.servername.com/images/picture.gif
>
> The Site Definition (Advanced Tab) allows me to make my
images relative to
> the
> site root. But since my customers are opening my HTML
docs in their
> inboxes,
> that doesn't work.
>
> I thought there was a way to make the entire URL appear
in the code for
> all
> images. Right now I do a Find/Replace at the end of my
process, but I
> would
> prefer it to be automated.
>
> I hope this makes sense, and I hope someone has an
answer for me.
>
> Jon
>

CS4 Dreamweaver not replacing paths for images/links

New Windows 7 machine with CS4 Web Premium. When using Dreamweaver, and, for example, replacing an image or a link in the design window using the properties... I click on the image, click the browse button, select the new file (I've tried hitting OK and double clicking -both of which should, or at least used to work in CS3). However, when returning to the main screen, the path to the image or link has not been replaced.
What is interesting is that IF I click on more than one image - i.e. say I am replacing one.jpg. So, I open the browse button, and select two.jpg, but then click on three.jpg (which is the file I want) and then hit OK (if I double click three.jpg after selecting another image first), it works fine.
Any ideas how to fix this irritating bug?? Thanks...

Hallelujah!! I'm not alone!! I wonder if Adobe does actually browse these forums. I can't believe something like this isn't a really easy fix for them. I can't tell you the amount of times I thought I'd updated a picture and then looked completely incompetant to a client because it didn't take. Very sloppy on both mine AND Adobe's part.

Correct URL path for images on HTML reports

We are using Reports Server 6.0 and rwcgi60.exe to display HTML reports on the web. A number of our reports have embedded charts in them which get converted into gifs when the HTML report gets generated.
The problem is that the HTML report has a <base href="http://machinename/cache/xyz.html"> at the top of the report. In our case, the machinename is the name of the web-server. However, when folks go to our website, they actually see our domain name rather than the internal machine name of the web-server. Hence, the images do not show up as the URL associated with the image is not accessible by folks coming from outside the web-server.
Is there some setting that will help us set the base href associated with generated reports? Or is there some other way to get the reports to show up with images on the web?
Thanks

You can't change the base tag - but I'm not sure I understand the problem. If machinename.domain is the full name of the machine running the webserver, and this is what was used when calling the CGI, then this is what the base tag will have. Does your machine have 2 names or something - and only 1 gets resolved to some folks?
Regards
The Oracle Reports Team http://technet.oracle.com

Recommended list of image services for image longevity?

I am a fan of screenshot threads but I get sad when I see image links to ompldr or dropbox which are inevitably broken.
Presumably Arch servers cannot handle the image bandwidth so we must depend on third party services.
Perhaps we should compile a list of recommended services to upload to and also actively discourage services like Dropbox, whose links seem to be dead (because user delete/moved the source?).
Imgur looks like it will survive for a while but I hate their interface to view full resolution images, so I probably wouldn't recommend them.
What do you guys recommend?

nibblebot wrote:Imgur looks like it will survive for a while but I hate their interface to view full resolution images, so I probably wouldn't recommend them.
When I upload pictures to imgur, I just make the link point to the image itself.
It's easy to do. Just add "i." before "imgur.com" and add the original filename extension (such as ".png") to the end.

Relative image path for image in textarea

Similar Messages

Maybe you are looking for