Relaunch process chain failed. Error 8

Hi experts,
My problem deals with chain of load.
The chain was launched by user ALEREMOTE.
After a loading process failed it become red. Then I attempted to repeat o repair the process failed and the answers was:
JOB_PROCESS_LOADING could not be scheduled. Return code 8.
So, I couldn't relaunch the chain from the process failed.
Please, could anyone help me.
Thank you very much in advance.
Jorge

HI,
This is due to lack of authorisations in the production box.Try to repeat it once again and again it will give the same pop up
go to su53 transaction code there you can see the authorisation faliure send the screen shot to the basis or authorisations team to add it to your role.
After adding just logoff from sap and then try tologin and repeaat the job this will work.
Regards,
Vikram

Similar Messages

  • Process Chain Failed Error

    Hi All,
    Following is the error in process chain, please let me know the approch to resolve the issue
    Source system: CRM
    Batch job cancelled with following error
    Job cancelled after system exception ERROR_MESSAGE
    The following is the error in process chain
    Process Attribute Change Run, variant has status Ended with errors (instance STRU_E0F3RXKBGPIRKR9NQCU2J7HLQ)
    The action is locked by a change run.
    Regards
    Kareena

    Hi,
    Usually a BI_STRU job runs in either of the two case mentioned below:
    1> Either you are manally pushing packets of a failed load may be because of lock or sid.
    2> When you manually run a ACR by selecting specific info objects in rsattr transaction.
    Now failing of a STRU job means the object is either locked that could be tracked in SM12( if you know the corresponding job for which the job was running).
    Usually an ACR if fails in between locks all the acquired objects , the failure could be checked either in sm37 with job name prefix BI_ATTR, or in RSATTR and detail in SLG1, it could be traced in se38 too using program RSDDS_Changerun_monitor in BI 7.0 and even could be restarted from there.
    For getting more information on which all objects are locked by the ACR you can use funtion module in rsdds_aggr_mod_state_get in transaction se37 too.
    Hope this will be expedite.
    Thax & Regards
    Vaibhave Sharma.
    Edited by: Vaibhave Sharma on Aug 31, 2008 9:28 PM

  • If Process Chain Fail in Production?

    Hi to all,
    Please can anyone tell me, if there is process chain running in production and any process type fail or process chain fail ?.
    Does we need to repair it, or repeat it or, restart it.
    How to identify what should be done and how to do it.
    I shall be thankful to you for this.
    Regards
    Pavneet Rana

    Hi
      Based on the error occur in process chain step, we have to monitor the error.
    If the error or red color occur when you schdule and check the log view,  then right click the error process step and select display messages, check the error clearly by using process monitor.
      based on the error you have to react.
    this links will helpful to you.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171?QuickLink=index&overridelayout=true
    Edited by: Srikanth.T on Jan 23, 2012 11:29 AM

  • What will u do if process chain fails?

    Hi gurus
    What will u do if process chain fails?
    Thank in advance?
    Raju

    Hi rajaiah
    Firstly if a process chain fails, identify the process that has failed and on the context menu of the failed process you will get an option called display message where you can find the exact reason for the failure. A process chain can fail in many cases. So first try to find the error occured . For example if a process chain has failed due to invalid records then we have to edit the psa and reload the data from psa to data target (reconstruction). Based on the error message you need to take the necessary actions...
    Hope this may help you.. please assign points if found helpful.
    Regards,
    Harish.

  • Send sms when bi process chain failed

    Hi SAP Gurus,
    Is some one inform me how is it possible to send an SMS when a process chain failed ?
    Is there a possibility to paramter something on the SAP BI system to execute this action ?
    Thanks

    Hi,
    I dont think there is an SMS option . But an email can be send when a Process chain gets failed.  The detail step for this is
    1. go to ALRTCATDEF
    2. select classification "Process Chains"
    3. click on display/change
    4. double-click on "error in a process of a process chain"
    5. click on "fixed recipients"
    6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
    7. save
    8. In RSPC, take the required process chain
    9. go into edit mode
    10. from the menu, select Process chain -> attributes -> alerting
    11. check "send alerts if errors occur"
    Regards
    Lekshmi

  • Process chain failed on creating Indexes

    Hello All,
    Since a few days our process chains have failed because of an impossibility to create Indexes.
    Job BI_PROCESS_INDEX can run for 3 days without any result. Usually it runs during 4 seconds.
    When we stop this job, the next day the process chain fails to delete indexes.
    If we run RSRV for our infocube we get the following error :
    ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
    Our DBA says it's a BW issue.
    Any idea to solve this issue ?
    Thanks &
    Regards
    Catherine

    If we run RSRV for our infocube we get the following error :
    ORACLE: The status of index /BI0/E0PA_C01~040 is INVALID
    I hope u followed the below to check cube.
    RSRV -> Tests in Transaction RSRV -> All Elementary Tests -> Database -> Database Statistics for an InfoCube and its Aggregates
    In that case, did u execute "Correct Error" (button in toolbar) to fix that error ?
    If that does not fix the issue,
    cannot u delete (button in toolbar) and reschedule Process chain (delete index -> DTP load to Cube -> create index) to create index ??

  • Process chain Failed!!! please help

    Hi All
    Process chain failed at activation of ODS process and the error message is
    Cannot activate request 0000006602(REQU_3YG2WB3F2C48PDD4X4BOW5FYS) of DataStore object
    Activation of M records from DataStore object RC2CTD01 terminated
    Please Help!!!
    Thanks

    I've checked in the monitor screen it's giving me the below error under status tab
    Request still running
    Diagnosis
    No errors found. The current process has probably not finished yet.
    System Response
    The ALE inbox of BI is identical to the ALE outbox of the source system
    or
    the maximum wait time for this request has not yet been exceeded
    or
    the background job has not yet finished in the source system.
    Current status
    All of the packets from the source system arrived
    I've repeated the process and it is asking for seconds...so how much should i give in the second field....
    Please help!!!

  • Process chain failed during DTP

    operation generate could not be carried out for the request no ...
    My process chain failed while DTP . Then i right clicked on it and clicked on display messages then the error is
    operation generate could not be carried out for the request while DTP in process chain
    Please give me the solution

    hi,
    chk if the DTP performs load with info spoke.
    if so chk the source and destination defintion of the infospoke definition.
    Ramesh

  • Process Chain failed at Delete PSA event level

    HI Every one,
    I am monitoring process chains, which are running on daily basis.
    I have one <b>Delete PSA</b> process chain, this chain contains only two events
    1. Start Event 2. Delete from PSA.
    Process chain failed at<i> Deleted from PSA</i> event level.
    Below is the error message I got from the process chain screen.
    "Data inconsistency in /bic/b0000231000 table,partition was not deleted"
    "Delete request REQU_4353ACARKJNY70Z5F11 from PSA 8ZMMOM...."
    Please help me by giving possible reasons for this error message and solution for this problem.
    Thanks  in advance.
    Regards,
    Narayana K.

    hi,
    Are you deleting the PSA requests using abap program?
    Regards,
    Vijay

  • Using Alert Framework to send email notifications when Process Chain fails

    Hi Everyone,
    I've configured ALRTCATDEF in Solution Manager, selected the alerting option for Process Chains in - RSPC > Attributes > Alerting, but it looks like whenever any process chain fails, an email notification will be sent to the same recipients.
    Is there anyway to have an ALRCATDEF - alert category for different process chains, so that different recipients receive notifications for different Process Chains.
    Thanks,
    Ken

    Interesting....I was actually hoping for different recipients for different process chains.
    E.g. for our
    CRM process chain - Support Team 1
    FI process chain - Support Team 2
    and so on and so on.
    I think the only way may be creating a custom process type and implementing a class for this process type that calls function SALRT_CREATE_API. Then adding this process type to the process chain, with a different variant for each.
    However if anyone knows a way to do this in a SAP standard way using the Alert Framework, that would be great.
    Cheers,
    Ken

  • Sending mail to GROUP ID when a process chain fails.

    Hi All,
    Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
    I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
    Thanks in advance.
    BR,
    Kiron.

    hi,
    The Distribution List/Group_id is created in SO23 transaction.
    hope it is helpful to u
    thanks

  • Process chain failed at COLLAPSE PROCESS TYPE ?

    HI all ,
    we have one process chain , in that  we have used oe process type collapse  for the cube .
    it got failed , but in the manage screen , under request status , it is showing tick mark i.e collapse successfully .
    give me some solution..
    regards ,
    Srinivas .

    Hi Venkatesh,
    thank you,  i have resolved this issue.
    i have checked in SM12 and there is no lock on the particular info cube then i repeated the process.
    the process chain failed at the stage of rolling up infocubes and the next triggred process was successfull even though i repeated the process chain.
    my concern is how the next process triggrred and it was successful when rollup process failed.
    can you please explain me
    thanks

  • Process chain failed at  AND process type ?

    hi all .
    Process chain failed at  AND process type ?
    and it is giving  message      Job cancelled after system exception ERROR_MESSAGE     .
    what is the reason & solution .
    regards ,
    srinivas ,

    Hi,
    That depends on the system behaviour... There is no issue in that... You can repeate the process.. If there is no repeat option available then you can on the detail view.. there is a chance that you will get a repeat option there.. If not then copy the chain.. remove the loaded process and add one starter chain an continue the chain in immediate mode...
    Regards
    Sajid khan

  • Process chain failing with error 8 in BI 7.0

    Hi ,
    we have upgrade the dev to BI 7.0 and I am trying to execute the process chains but it is failing with a error 8 due to the step of the job BI_PROCESS is in the name of a old user. So i have changed in process chain -Attrbutes--Execution user --- current user.So the chain has started but it has so many chains inside the Meta chain it looks i need to go to each of them and change as cyurrent user.
    But is there some place where I can change globally to a Batch user/current user for these process chain in BI 7.0.If so pl let me know.

    Hi,
    user SM37 to identify all BI_PROCESS jobs and change the User of the step in the jobs (they all should only have one step).
    bye
    Frank

  • Attribute Change Run in Process Chain failed with SQL 942 error

    Hi,
    Attribute change run in th eprocess chain failed with the message " SQL Error 942" and ran succesfully after repeating the step.Searched in Forums for similar error but the solutions were not apt.
    Any pointers would be of great help!!
    Thanks in advance,
    Bhagyarekha.

    Hi Bhagyarekha,
    The reason behind that error could be:
    An attempt is made to activate a characteristic whose compounding was replaced and whose navigation attributes were simultaneously deleted. The replacement of the compounding temporarily deletes the M view of the characteristic during internal activation. The process of deleting navigation attributes involves converting the attribute SID tables. However, the M-view of the characteristic, which has just been deleted, is needed for this conversion.
    Check this SAP Note:
    Note 684405 - Replacing the compounding and deleting navigation attr.
    Hope it helps.
    Veerendra.

Maybe you are looking for