Relay for NI 6703
At the previous experiment, I used the relay (sc 2040)
for the PCI-MIO-16E-1. In this time, I am trying to
replace the DAQ for the NI 6703. Could you recommand
me the relay like sc-xxxx?
Thanks.
Hello;
Any digital SCC module that works with the MIO board, also works with the 6703 board. The best bet is to look up in the product catalog for the needed accessories of that new configuration.
You also have the option to use the digital relay SCXI module for more robust applications.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments
Similar Messages
-
Our company recently moved to Office 365 which mean our on premise exchange server went away as well with the move. I am trying to configure my new sql server (OS-Windows Server 2012 R2, DBMS- SQL 2014 Std Edtion). After some searching I found
this article (http://blogs.technet.com/b/meamcs/archive/2013/02/25/how-to-configure-sql-database-mail-so-send-emails-using-office-365-exchange-online-a-walkthrough.aspx) and have followed these steps exactly, but to no avail. I did some further research
on the SMTP relay I setup and found a way to test it (listed here http://technet.microsoft.com/en-us/library/dn592151(v=exchg.150).aspx at the bottom of the article). If I drop the email.txt file in the pickup folder, it gets sent out no problem.
I have configured my db email exactly as describe here(http://blogs.technet.com/b/meamcs/archive/2013/02/25/how-to-configure-sql-database-mail-so-send-emails-using-office-365-exchange-online-a-walkthrough.aspx). But keep getting an unable to connect
to SMTP server error. I have even tried completely shutting down firewall to see if that is the issue and multiple restarts. Any ideas how to get this to work on Office 365?
DB Mail error log:
Date 6/10/2014 10:28:41 PM
Log Database Mail (Database Mail Log)
Log ID 46
Process ID 2196
Mail Item ID 19
Last Modified 6/10/2014 10:28:41 PM
Last Modified By xx
Message
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2014-06-10T22:28:41). Exception Message: Cannot send mails to mail server. (Failure sending mail.).Hi,
I followed this blog and got the below error message in the Database Mail Log.
“The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2014-06-11T19:34:00). Exception Message: Cannot send mails to mail server. (Mailbox unavailable. The server response was: 5.7.1 Unable to relay
for [email protected]).”
If you are getting the same error message, you can try the below steps to resolve the issue.
1. Open the IIS 6.0 management console. Right click on the SMTP server and open the properties window.
2. Click on the Access tab, click Relay button under Relay restrictions. loopback IP address (i.e 127.0.0.1).
Then the email should be sent out from Database Mail without problem.
Thanks.
Tracy Cai
TechNet Community Support -
550 5.7.1 Unable to relay for [probably bogus Email address]
Hello,
My Exchange Server has been reporting numerous instances of the following message (or very similar messages) most days for a couple of weeks or so now:
This is an SMTP protocol log for virtual server ID 1, connection #3. The client at "118.161.64.59" sent a "rcpt" command, and the SMTP server responded with "550 5.7.1 Unable to relay for [email protected] ". The
full command sent was "rcpt TO: <[email protected]>". This will probably cause the connection to fail. For more information, click http://www.microsoft.com/contentredirect .asp
The Email address is unknown, and probably bogus.
What really concerns me is that the messages from yesterday (Sunday!) contained a now defunct Email account from someone who used to work in our London head office, but left about a couple of years ago. To me, this implies that there has been unauthorised
access to the company IT infrastructure - possibly at both sites - and that someone is trying to get our Exchange Server to relay unsolicited / mailicious Emails. The above message suggests that the attempted relaying has not been successful to date, and I
can't find anything out of the ordinary in the SMTP queues or the Exchange logs - but the persistence does concern me.
So, am I reading this correctly? If so, what can I do about it? Or if not, what does it really mean?
Thankyou very much for your help.
Kind regards,
KeithIf your Exchange server is accessible from the Internet, as it would be to allow you to receive SMTP mail unless you have a relay server like an Exchange Edge server, then Spammers will attempt to use it to relay. Your server is correctly rejecting
that, so I don't see a problem. If you're worried about this, then you could contract with a third-party cloud-based message hygiene service like Exchange Online Protection, and the restrict the IP address that can talk to your Exchange server to those
of the hygiene service.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
Hello
I would like to control a Red Hat solenoid valve with the USB 6009 (Very neat and economical multifunction DAQ!). The USB 6009 has some digital output lines specified as TTL. Can someone advise me as to a suitable relay for a 120V AC valve with a 6Watts power consumption?
Thanks John BrohanJohn,
Here is the simple solution to your problem. You can tie two or more ports together which to get higher current capacity.Make sure you use the 4.7k pull up resistor after tieing them together.Then output all the tied ports together as if it is one port. In your case if you need 20ma you can tie-up 3 ports for 24ma capacity.
Warning!!!! You have to turn all the ports ON or OFF at one time otherwise it may burn the board.
Kanwar -
Hi!
I am with a problem during a sending e-mail for 3500
addressees.
In the way it process me of the one error and in log CF
Administrator shows the following error to it:
Invalid Addresses; nested exception is: class
javax.mail.SendFailedException: 550 5.7.1 Unable to relay for
What it could be?
Server Configuration:
Windows 2003 Standard with ColdFusion MX 7.02 (last update)
Best RegardsYou need to either authenticate your user or turn on relaying in your SMTP server. See the JavaMail tutorial for how to authenticate
-
i got this problem ,when i try to send mail from mail Queue.
ORA-29279: SMTP permanent error: 550 5.7.1 Unable to relay for [email protected]
Edited by: Alekh on Aug 7, 2009 10:13 AM
Edited by: Alekh on Aug 7, 2009 11:52 AMHi,
I think you can check your SMTP server with your system administrator firstly. does it work normally?
And if you are using a Windows PC for APEX, you can check you SMTP server in your IIS administration.
From your error info : Unable to relay, you can follow below to have a check, if you are working on MS Window
IIS -> Default SMTP Virtual Server -> Properties -> Access -> Relay resitrictions -> Relay -> All except the list below.
Hope this helpfull.
PPMonkey. -
There's a bug in either Microsoft Exchange or JavaMail API.
An exception is thrown when sending an email:
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
class com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for [email protected]
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1141)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:536)
at javax.mail.Transport.send0(Transport.java:151)
at javax.mail.Transport.send(Transport.java:80)This exception is caused by, believe or not, because the same mail session has defined the "mail.imap.fetchsize" property in an earlier IMAP session.
I used this line to fetch a session and in the IMAP code I defined the fetchsize property to increase performance. An identical line was used in the SMTP code to fetch a session to send a mail. As it turns out, the SMTP communication is disrupted by the fetchsize property.
Session session = Session.getDefaultInstance(props, null);
My solution was to change the SMTP code the following:
Session session = Session.getInstance(properties);
Hope this helps someone, somewhere in the future...Well, I don't believe the fetchsize property is disrupting SMTP sending, but it is true that
everyone who calls Session.getDefaultInstance gets the same Session object, and the
properties for that Session are set by the first caller. The properties passed in by
subsequent callers are ignored.
The javadocs for the method try to explain this behavior, perhaps not well enough. -
Evaluating debug src, and 'Unable to relay for ...'
hello.
i wanted to know if there is any possibility to evaluate the string that is returned using debug mode in javamail. for example to know wheter conn to mailserver was ok. wether sender or recipient was ok and so on.so that i can (for example) build in some if-clauses to stop (and give a mesage to the current user 'conn failed') or retry some processes.
my second question is, that i sometimes get an error sending mails. the app is running on a tomcat server (localhost). after restarting the tomcat, it works again. after a while (2 or 3 days) it gives me the error message again ('Unable to relay for')here is my exception:
###################### debug/exception start ######################
DEBUG: getProvider() returning
javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun
Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth false
DEBUG: SMTPTransport trying to connect to host "localhost", port 25
DEBUG SMTP RCVD: 220 ffmserver.mailabc.local Microsoft ESMTP MAIL Service,
Version: 5.0.2195.6713 ready at Mon, 3 Apr 2006 13:17:02 +0200
DEBUG: SMTPTransport connected to host "localhost", port: 25
DEBUG SMTP SENT: EHLO ffmserver
DEBUG SMTP RCVD: 250-ffmserver.mailabc.local Hello [127.0.0.1]
250-AUTH GSSAPI NTLM LOGIN
250-AUTH=LOGIN
250-TURN
250-ATRN
250-SIZE 2097152
250-ETRN
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-8bitmime
250-BINARYMIME
250-CHUNKING
250-VRFY
250 OK
DEBUG SMTP Found extension "AUTH", arg "GSSAPI NTLM LOGIN"
DEBUG SMTP Found extension "AUTH=LOGIN", arg ""
DEBUG SMTP Found extension "TURN", arg ""
DEBUG SMTP Found extension "ATRN", arg ""
DEBUG SMTP Found extension "SIZE", arg "2097152"
DEBUG SMTP Found extension "ETRN", arg ""
DEBUG SMTP Found extension "PIPELINING", arg ""
DEBUG SMTP Found extension "DSN", arg ""
DEBUG SMTP Found extension "ENHANCEDSTATUSCODES", arg ""
DEBUG SMTP Found extension "8bitmime", arg ""
DEBUG SMTP Found extension "BINARYMIME", arg ""
DEBUG SMTP Found extension "CHUNKING", arg ""
DEBUG SMTP Found extension "VRFY", arg ""
DEBUG SMTP Found extension "OK", arg ""
DEBUG SMTP: use8bit false
DEBUG SMTP SENT: MAIL FROM:<[email protected]>
DEBUG SMTP RCVD: 250 2.1.0 [email protected] OK
DEBUG SMTP SENT: RCPT TO:<[email protected]>
DEBUG SMTP RCVD: 550 5.7.1 Unable to relay for [email protected]
Invalid Addresses
[email protected]
DEBUG SMTPTransport: Sending failed because of invalid destination addresses
DEBUG SMTP SENT: RSET
DEBUG SMTP RCVD: 250 2.0.0 Resetting
DEBUG SMTP SENT: QUIT
javax.mail.SendFailedException: Sending failed;
nested exception is:
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 550 5.7.1 Unable to relay for
[email protected]
at javax.mail.Transport.send0(Transport.java:219)
at javax.mail.Transport.send(Transport.java:81)
at
de.mailabc.filework.beans.mail.MailSendingMsg.SendEmail(MailSendingMsg.java:115)
at
org.apache.jsp.jsp.dcs.lists.boxes.action.send.send_jsp._jspService(org.apache.jsp.jsp.dcs.lists.boxes.action.send.send_jsp:308)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:325)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:825)
at
org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:738)
at
org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:526)
at
org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Unknown Source)
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 550 5.7.1 Unable to relay for
[email protected]
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:804)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:320)
at javax.mail.Transport.send0(Transport.java:164)
at javax.mail.Transport.send(Transport.java:81)
at
de.mailabc.filework.beans.mail.MailSendingMsg.SendEmail(MailSendingMsg.java:115)
at
org.apache.jsp.jsp.dcs.lists.boxes.action.send.send_jsp._jspService(org.apache.jsp.jsp.dcs.lists.boxes.action.send.send_jsp:308)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:325)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:825)
at
org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:738)
at
org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:526)
at
org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Unknown Source)
###################### exception end ######################
any ideas
thanks a lot
faissalYou don't understand that message? It's specifically mentioned in the FAQ.
-
Reccomend the best relay for my application
I have a NI USB
9219, 4 Ch-Ch Isolated, 24-bit, ±60V, Universal Analog Input module
which I intend to use for RTD measurement (2 wires) with three pt1000
sensors. However, it is not intended for continuous measurement. I need
to keep the lines+sensor grounded when I don't measure and therefore I
need a TTL (5V-DC) triggered switch/relay to connect them to the NI USB
9219 only when measuring is allowed.
Which switch would you reccomend?
Thank you!How many wires do your RTDs have (2,3 or 4)? How many wires do you need to disconnect on your RTDs? If you just need to stop the current flow, we only need to disconnect one wire, regardless of the number of wires on your particular RTDs. This will require 4 SPST relays.
9481:
4 mechanical SPST relays, 50mOhm max.
9485:
8 solid state SPST relays, 200mOhm max.
If you're trying to isolate the RTDs for some particular test, we'll
need to disconnect all wires, which would require 8, 12, or 16 SPST
relays (for 2, 3, or 4 wire RTDs). This would require up to 4 9481 modules, which might be cost and space prohibitive.
Note that both of these options simply disconnect the RTD and leave it floating... if we need to ground 1 or more wires, we'll need additional SPST relays (in other words, create an SPDT using two SPSTs).
If PXI is an option, the 31 SPST PXI-2568 is a great option.
If PXI isn't an option, you might consider purchasing the 9476 DO module, which has 32 digital outputs that we could use to drive external relays. Said external relays could be SPDT, so we'd only need 16 channels max... now you can add more RTDs .
If I missed any details on your application, let us know and we'll look at other options.
-John Sullivan
Analog Engineer -
How to use multiple mail sending address in SMTP relay for exchange online
We have one SMTP relay configured with [email protected] credentials. one oracle application automatically shoots mail to users using this [email protected] to users. So if recipient reply on auto-generated mail it goes to mailbox of [email protected] (so that application
team see and reply to any query raised by recipient).
Now my requirement is, I want to notify users about their password expiry before 10 days (something like that) I have made the script and tested it in lab. But the main requirement is I want to use [email protected] mail ID for sending mail. And if any recipient
reply on the auto-generated mail it goes to [email protected] mailbox (which is managed by different team).
So the query How can I use two different mailbox enabled IDs for sending mails on a single SMTP Relay server
Thanks
Pankaj SharmaThanks Ed and Mavis for the reply and suggestion, but here scenario is different.
We have one SMTP relay configured with [email protected] credentials. one oracle application automatically shoots mail to users using this [email protected] to users. So if recipient reply on auto-generated mail it goes to mailbox of [email protected] (so that
application team see and reply to any query raised by recipient).
Now my requirement is, I want to notify users about their password expiry before 10 days (something like that) I have made the script and tested it in lab. But the main requirement is I want to use [email protected] mail ID for sending mail. And if any recipient
reply on the auto-generated mail it goes to [email protected] mailbox (which is managed by different team).
So the query is can I use two different mailbox enabled IDs on a single SMTP Relay, If yes then how..
Thanks
Pankaj -
Receive connector to allow relay for localhost
I have set up a relay receive connector to allow anonymous relay from another exchange server (send mails with Send-MailMessage cmdlet ) and it works just fine, but trying to send same mail from localhost falls into default receive connector and returns
authentication error. Adding anonymous users to permission groups in default receive connector it works, but it's not what I want. Is there a way to make the relay connector work for localhost too avoiding the overlap between connectors ?Hi,
Let’s begin with the following article:
http://blogs.visendo.com/post/2009/12/23/Configuring-Exchange-2007-Relay-Settings-for-Exchange-Connector.aspx
“If you are using the localhost alias as the server name, be sure to include the loopback address (127.0.0.1) in the range.”
Thus, we can try to add 127.0.0.1 in the list of "receive mails from remote servers " setting.
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Thanks,
Angela Shi
TechNet Community Support -
hi
I have SGE2010 switch in layer 3 mode and im unable to assign IP addresses in second VLAN 2.
My setup
Port 1: TRUNK , VLAN 1 and VLAN 2 --> connected to Cisco 887 FE3 Trunk with VLAn 1 and VLAN 2 and DHCP pool for VLAN2
Port 2: TRUNK , VALN1 and WLAN2 --> Cisco Aironet 1040 LAN WIFI VLAN 1 and Guest WIFI VLAN2
Port 3: Access , VLAN1 Windows DHCP server for VLAN 1 subnet
My LAN WIFI clients can get IP from Windows DHCP server for VLAN 1
My Guest WIFI clients on VLAN 2 cant get an IP from the Cisco 887 router on VLAN 2.
I did try turning on DHCP relay etc but didnt make any difference.
Can anyone give me some pointers on wat im missing ?
Thank youHi, if the symptom is that when you assign an IP address to vlan 2 the switch "locks up" then the reason is because the vlan 1 did not have an IP address assigned by user.
To fix that, you'd need to add an IP address for vlan 1 as you like then try to make an IP for the additional vlans.
-Tom
Please mark answered for helpful posts -
Internal Open Relay For Entire Network
Hello All,
Sorry if this has been answered, but I haven't seen anything that addresses specifically what I need in the forums.
I have a single Exchange 2010 Server. I've set up a new receive connector called Open Relay and have opened up various I.P. Addresses. What I would like to do is open it up for all of my subnets internally (10.0.0.1/24.) Which is easy enough.
Here's the problem, I only want the Open Relay to work internally, I do not want any of my workstations to be able to relay off the trusted subnets, across those internal subnets YES, but to the outside world, NO. Everything I try gives them rights to relay
both inside and outside, that is a blacklisting just waiting to happen.
This is so that all the scripts that I run remotely on workstations can send me emails with info that I need.
Thanks EricCreate a receive connector
http://technet.microsoft.com/en-us/library/bb232021.aspx
add the required subnet to allow relay
Get-ReceiveConnector yourconnectorname | get-ADPermission -User “NT AUTHORITY\ANONYMOUS LOGON” -ExtendedRights
MAS -
Hi,
I want to relay mails from smtp A to smtp B.
Smtp A is register in the dns as smtpAdressA MX record so when users mail to adress1@smtpAdressA the mail is being recieve at smtp A but how do i relay it to smtp B ?
I added adomain in smtp A with the ip adress of smtp B and configure it to relay all incoming mails but still it wont relay to smtp B.
thanksgot it working it was the fire wall on smtp B server.
-
Secure way for SMTP relay for DMZ server
Hi,
I would like to know if there is a secure way to allow SMTP relay from server in DMZ. This is our Exchange server configuration.
All Exchange server roles installed on a single server.
No Edge server.
Thanks in advance.Hello
if haven't got relay connector, need create one receive connector add only one dmz ip and if application can authentication use that authentication method, if cant use any auth method enable anoynous relay.
sorry my english
Maybe you are looking for
-
RIDICULOUS customer support and invoice due to fraud - Still not resolved since April
I am posting my story from the past 9 and a half months here only because I’ve tried many many other ways to get in touch with Verizon about issuing a billing credit but have received TERRIBLE customer service during this entire time. I am now tryin
-
Best Practice to Assign Network
Hi Experts, I have a question - What is best practice to Assign networks. Is it Header assignment or Activity Assignment. I have a requirement which asks for a WBS Level Cost and Revenue posting while settlement. I followed the standard design of hav
-
Can't open up itunes because it says some required files aren't there
my itunes wont open up because it says some files that are required are missing
-
Error compiling single ejb using appc/ejbc (long)
This may be related to my earlier post ("no longer able to build ejb using appc (WLS 8.1)", posted this morning), but the error and the way I encountered it were different enough that I thought I'd post as a new topic. I've been trying to build a pro
-
Hi, There is a new feature added in java 7 on integer, called as underscore '_" and it is working fine if it is a normal int variable but if it is coming with String jvm throw the error. if any one of you have java8 installed on your PC can you che