Release 1.5, 'enum' is a keyword, and may not be used as an identifier.help
hello
i am working for a MNC and i am trying to build my prduct in JDK1.5 and i am getting this error...
...release 1.5, 'enum' is a keyword, and may not be used as an identifier...
the probelm is that i cant go to 1.4 as my product suports only 1.5 and above ..
give me asolutin as fast as possible...
hello
i am working for a MNC and i am trying to build my
prduct in JDK1.5 and i am getting this error...
...release 1.5, 'enum' is a keyword, and may not be
used as an identifier...
What am I missing? Don't use the 'enum' as a variable name!
Similar Messages
-
To Whom It May Concern,
I have a MacBook Air, Ipad 2 everything was fine. Then I upgraded it to OS X Yosemite , everything when downhill, can not even use FaceTime . i have tried everything. Can somebody help me out on this please. Thank you.Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
I have tried many times to restore my new IPod Touch 5G in I Tunes and it will not allow me to do it. My Ipod will not turn on at all even when on a fresh charge. Only displays the arrow leading up to ITunes logo. I have tried the method of holding the home button and on button and this does not work. Any help appreciated.
My I Pod was working fine until the day I updated the software to 6.0.1.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iphone was stolen and my mother gave me her 3GS, however she never updated the soft ware. It is on 3.13 and will not update to IOS 5. Help!
How about the issues with 3.1.3 on the 3GS?
3.1.3 battery problem
OS 3.1.3 battery issues
3.1.3 upgrade - shortened battery life?
Battery life cut after 3.1.3 update on iPhone 3G
3.1.3 Firmware is a battery killer - how do I back out this upgrade?
Some users have problems with any release. iOS 5 is no different, not better, not worse. -
The required version of java ,1.4.2_06, is not the latest and may not conta
Hi
I've implemented SSL on Discoverer and it works fine,
the problem comes when discoverer laucnhes it pops up with this massage
the required version of java ,1.4.2_06, is not the latest and may not contain latest security updates.
I the click on yes, and then it takes about five minutes to work.
I followed metalink note 427930.1 and it did not help.
I'm busy going thru matalink note 290807.1
can someone please help.
Thanks
SibusisoChange your formsweb.cfg to use JRE 1.6.0_27. It is not a good idea to use old JRE versions. Each new release includes bug fixes as well as security enhancements. Using old versions may leave your system at risk of exposing bugs and/or security vulnerabilities. Since Forms 11 is certified with 1.6.0_12 and supported with all 1.6.0_12+ versions, moving to the latest in the 1.6 series is a good approach.
Alternatively, disable the Autoupdate feature in the JRE, found on the JRE Control Panel.
For future reference, there is a Forum specifically dedicated to JRE issues/questions:
Java Runtime Environment (JRE) -
I have a Sony Bloggie Duo MHS-FS2 and do not know which community will be helpful.
I have a Sony Bloggie Duo MHS-FS2 and do not know which community will be helpful for reading and learning about my video camera. I am having trouble learning how to use it. I have Windows 7.
Solved!
Go to Solution.Hi,
There is separate board for the Bloggie camera. I am moving this post to the appropriate board so that others looking for the same information can locate it under the correct board.
Now to answer your post, instructions regarding using the basic functions of the Bloggie Camera can be found in the supplied manual. However, detailed instructions regarding the different functions of the Bloggie camera can be found in the Bloggie Handbook included on its internal memory.
You can also download the handbook from the below link.
http://www.docs.sony.com/release/MHSFS1-FS2_handbook.pdf
Additionally, there are video tutorials available for the Bloggie camera in the “Videos & Tutorials” section of the eSupport website.
For instructions regarding installing and using the Bloggie software, refer to the below link to some great tutorials on the Bloggie that I found on the Sony UK website.
http://www.sony.co.uk/support/en/topics/how-to-use-bloggie-software/MHS-FS2
If my post answers your question, please mark it as an "Accepted Solution." -
I recently got a charging case for my iPhone 5s, but it says it isn't certified and may not work reliably with my iPhone. What can I do to fix it?
Buy one that is certified. Your current case might work without problems, and then might stop working in the future. iOS 7 is especially "sensitive" to uncertified peripherals. With this iOS release they have started to clamp down on "pirate" peripherals.
-
genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge - went to Apple in Milton keynes to get a replacement charger this weekend that does not work as well!
Well, if this problems is so old I think it is strange that Apple hasen't fixed the bug long time ago, and certainly after the release of iOS 8.1.
Well, thank you very much for your answer, Lawrence Finch. I think the best thing to do is to send the phone to repair, if there is no solution to fix this by my self. I will anyway call the Apple support tomorrow, but I don't think they will illuminate me... -
My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly. -
How do I move a movie I have synced from iTunes into the "Movies" tab of the Video App? I need to access a slideshow I made in IMovies and may not have WiFi. I did it once, but can't figure out how to do it again! The file is an m4v. Thank you!
Im just guessing but it seems like you would have to get your movie into the correct folder on a computer then use iTunes to sync it to your iPad. If you've synced to a computer and have movies then on your computer should be a folder with the movie in it. You could export your iMovie to something like Dropbox then download from Dropbox to the folder you think it needs to be in the sync your iPad again. Again this is just a guess. Others may have a better answer.
-
How can I change my iCloud email address without losing all my data and what not???? Please help...
Welcome to the Apple Community.
You can't change it but you can create an alias to use. -
since I upgraded to the new operating system my charger no longer works...
It says"this cable or accessory is not certified and may not work reliably with this iPhone"Try checking your cable socket/lightning cable for dirt, grime, pocket lint, etc. I could not find the solution to this issue myself and after much searching I found someone stating that cleaning this out helped them immensely.
After taking a wooden toothpick (making sure the phone was OFF first) and gently clearing out the edges and inside of the lightning socket this went away.) It is worth noting that I had a significant amount of dust or lint buildup along the edge rails which I think was causing the iphone to believe it was plugged into something when it was not.
Try it and see, ensure you are very careful and do not use any conductive tools to clean the area in question. Compressed air also does wonders here. -
Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
Maps took me to the completely wrong side of town for a long standing business in town.Hello margmcarlson,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
Best of luck,
Mario -
my iPhone unexpectedly shut down and now is not turning back on, charging and is not being detected by my laptop, help
i put that i held down the home button and all that... sorry, should of made my message a little clearer hun.. but i did try that, ive been searching video's on the net trying to figure out how to fix the problem, but nothing seems to be working... ive just tried pluging the usb lead into my phone while holding the home button then connecting it to my computer to see if itunes fires up, but even that didnt work... i dont know what else to try.
-
Just Upgraded my IPOD 5 to iOS 7.0.2 and it will not charge the battery anymore.
When I plug it in, it now gives the message "This cable or accessory is not certified and may not work reliably with this IPOD".
Anyone else have this issue after they upgraded the iOS system?
Thanks,- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Need to replace my hard drive, no response from hp in 5 days
Hi, I bought a HP Pavilion Touchsmart 15b146ef in France some months ago (still under warranty) and my hard disk drive in now dead. I ran a hard drive short DST check test which failed with the following failure ID : 60D5XV-6MQ6TA-MFPWW1-60QX03. It's
-
Mountain Lion 10.8.2 wont install?
Hey guys! So I bought a MacBook Pro with Retina Display and all was OK until I tried to update iPhoto. It said that "OS X version 10.8.2 or newer" is required. So I clicked on the Apple logo and selected "software update", but no OS update was availa
-
IDOC for SAP BP Message "Table BAPIADTEL entry to be changed
Hi Experts, I have a requirement to update BP Address details using LSMW. I am usign IDOC Message Type "BUPA_C_CHANGEADDRESS" and Basic Type "BUPA_C_CHANGEADDRESS01" for this requirement. Using this i am able to update City, PO BOX, Postal Code, Stre
-
Hiding the floating toolbar acrobat reader x
Hello We have developed software that displays pdf documents on the screen for validation by the user before printing. We need to be able to manage the "print" action within our software and with the new floating toolbar this has become impossible. I
-
I can't figure out how to transfer videos from ims messaging to video files.