Release 1 Portal "monitoring tab" disappear in release 2 Portal

Can anyone tell me where is the Monitoring tab(release 1 portal) in Release 2 Portal under the Portal home page?

The Monitoring tab was removed in Oracle9iAS Portal Release 2. The reason for this is that a number of the reports that existed in Release 1 are now sometimes reporting misleading information. The main reason for this is the efficiency of the caching in the middle-tier (e.g. Web Cache and the mod_plsql cache) which prevent all web requests hitting the Portal Repository where the reporting data gets updated.
We have however replaces a number of these reports with new reports that work off middle tier log files, and which provide a more accurate picture of the actual requests being made. We do have longer term plans to provide a more comprehensive set of reports.
For details of the middle-tier log based reports, check out this link on Portal Center:
http://portalstudio.oracle.com/servlet/page?_pageid=478&_dad=ops&_schema=OPSTUDIO&7655_MAINPAGE_39847486.p_subid=33710&7655_MAINPAGE_39847486.p_sub_siteid=73&7655_MAINPAGE_39847486.p_edit=0
Regards
Greg

Similar Messages

Release Tab in purchase order disappear after release using ME29n

Hi there,
We are busy testing support stacks (upgrading from ECC6 SAP_APPL SAPKH60305 to SAPKH60307)and we've come accross a strange problem. When we create a normal purchase order (ME21n) the purchase order does pick up a release strategy. Using the older ME28 transaction to release this purchase order, everything is fine. We can use ME28 to release the purchase order, as well as unreleasing the purchase order, as often as we want (the same purchase order). When we use transaction ME29n the release tab in the purchase order just simply disappears after saving. In the purchase order header changes, the release change is visible, but the release tab is missing. This purchase order is now not subject for release, and a goods receipt is possible without release. I checked in table EKKO as well and the release fields in this table for this purchase order is empty.
Has anybody had a similar experience? Any advise would be greatly appreciated.
Regards
Christo Vermeulen

Hi Christo Vermeulen,
I have detected the same problem as reported by you. Did you solve it? Do you know how can I procedure to solve it?
Thanks in advanced,
Eder Nicoleti

Portal extension plugin for JDeveloper release 10.1.3

Metalink Note:356550.1 says 'The expected time of arrival is second quarter 2006' [for portal extension plugin for JDeveloper release 10.1.3].
When will this be available for customer use? We notice it can already be downloaded from an internal Oracle website.
Thanks,
Jon

Hi,
expectation is this month or early next year. The version of JDeveloper is 10.1.3.2. Maybe if you ask this question on the portal forum they have a more precise date
Frank

EXIT_SAPLEBND_004 lets release tab disappear on PR

Hi, Gurus,
I created an enhancement project ZMM_005 throught CMOD,It was assigned with M06B0005.
After activating it, I found that release tab disappeared from PR screen.
(In my R/3 system, PR release was set into overall release.)
After I entered PR number and release code on ME54, SAP gave the error message "Purchase requisition not subject to a release strategy".
It's why?
Please give me some suggestion.
Edited by: Mic chen on Feb 15, 2010 9:20 AM

Thanks very much.
I found the solution(SAP Note 371667).
Edited by: Mic chen on Feb 15, 2010 10:48 AM

New Technote: Monitoring, Diagnostics & Analytics with Oracle9iAS Portal

A new Portal technote (Monitoring, Diagnostics & Analytics with Oracle9iAS Portal Release 2) that documents the "state of the union" on Monitoring, Diagnostics & Analytics has been published in the Architecture folder of PortalCenter (http://portalstudio.oracle.com/servlet/page?_pageid=478&_dad=ops&_schema=OPSTUDIO&7655_MAINPAGE_39847486.p_subid=33710&7655_MAINPAGE_39847486.p_sub_siteid=73&7655_MAINPAGE_39847486.p_edit=0).
...or you can link to it directly at http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/ARCHITECTURE/MONITOR_DIAGNOSTICS_ANALYTICS_PORTAL.HTM
Portal PM

Hi Jason,
The scripts link is from oracle site, which you mentioned http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/ARCHITECTURE/PERFMON_MODPLSQL.HTM. We are using Oracle 9i AS v9.03 and not planning upgrade to v9.04. How can I download those scripts to do Performance monitor. I have metalink account. But I cannot find any information there either. Please help me. If we cannot find from public site could you send it to my email address [email protected]
Thanks a lot.
David

Release strategy of contract disappeared after using of MEMASSCONTRACT

Hi All,
May be some one can help me?
I have next problem it tr. MEMASSCONTRACT(ECC6)
Release strategy of contract disappeared after using of tr. MEMASSCONTRACT. I know why it happened, but I don't know how to correct it. Some time ago IN ECC5 we added a field to a table EKKO and used this field as one of characteristics in the release strategy of contracts. In order to transfer value of this field to field CEKKO-USRC1 we used User Exit EXIT_SAPLEBND_002. This User Exit is suitable only for online transactions (ME31K, ME32K). How can I feel field CEKKO-USRC1 in transaction MEMASSCONTRACT?
Regards, Liza

Thank you. Probably I didn't explain my problem clearly. It's section of code from User Exit EXIT_SAPLEBND_002:
ATA: reference(20) TYPE c VALUE '(SAPMM06E)EKKO'.
DATA: it_ekko TYPE ekko.
FIELD-SYMBOLS: <ymm_icl> TYPE ANY.
e_cekko = i_cekko.
*THE "ICL Contract" FIELD IS ONLY RELEVENT IN THESE TRANSACTIONS
IF sy-tcode EQ 'ME31K' OR sy-tcode EQ 'ME32K'
OR sy-tcode EQ 'ME33K' .
ASSIGN (reference) TO <ymm_icl>.
it_ekko = <ymm_icl>.
e_cekko-usrc1 = it_ekko-ymm_icl.
ENDIF.
Program SAPMM06E can only be reffered while using online transactions. Mass transactions does not use these program and it is completely class based. So, may be someone know how can i do the same , but for tr. MASS in ECC6.

Problem with portal monitoring

Hi,
I have a question concerning portal monitoring.
When I click on System Administration -> Monitoring -> Portal -> Request or Component Overview there's no data displayed. When I click on the "Display" button I get the message No request executed since the last reset.
Is there a service to activate?
Thanks and Regards,
Andreas

Hi Andreas,
you need to switch on JARM monitoring. Refer to http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/86eb3f0c49f106e10000000a1550b0/frameset.htm
Best regards,
Thomas

Enterprise portal monitoring

Hi,
We have implemnted EP7.0 , we need to monitor each and every task in Portal.
Is there is document which gives moniroring setup?
- Kristene

Hi Kristene,
For Portal Monitoring there are good blogs.u cn have a look at these....
u can monitor tasks using portal activity reports...
Mysteries of the Portal Activity Report
Mysteries of the Portal Activity Report II
Mysteries of the Portal Activity Report III
In portal u follow these path
System Administration
Monitoring
Portal
Activity Reports
Regards
Bhargava
award points if it helps

Portal admin tasks / Portal Monitoring

Hi,
I am new for EPP, and I would like to know tasks list for Basis person at EPP level. If any idea please let me know.
Also if possible please tell me performance & monitoring areas in EP.
Regards
RP

Hi,
Some of the tasks are
1. Taking the online and offline backup
2. Shutdown and Starting of EP
Performance and Monitoring will be done by Portal administrator.
Login to Portal using system administrator id
Go to System admin --> System administration --> Monitoring
Regards
Arun

Customizing availability of Portal Roles/TABs (ESS)

Hello Portal Knowledgeable ones,
I am running EP 6.0 SP13.
We will be implementing many of the Standard HR ESS functions. We desire to purposefully limit the hours of the day when these capabilities are available to users--EVEN THOUGH THE PORTAL IS UP. As an example, viewing paystubs is available 24x7, whereas other update-type ESS functions (update absences) will not be available from 1am to 5am each day. We want to limit this access because our payroll processing occurs during this window, and we do not want updates to occur during it.
Here is my question:
For the standard ESS web dynpro portal functions, how do we implement a time-of-day switch such that access to certain iViews is prohibited.
The end user experience needs to be as follows:
If time is between 1am - 5am and user clicks on updating ESS item in the portal, the system displays an alternative iView indicating that the system is down for maintenance.
General advice would be welcome as well. It seems that the portal displays tabs/content solely based on your pre-assigned roles. How do you turn-off assigned portal roles dynamically?
Thank you for any insights!
Kevin

Found a solution. All users are assigned to groups. Groups are then linked to roles. To change content for user, update the group to role link using UMFactory inside a portal application.

Portal content TAB(workset) is not apperaing

Hi,
I was working and suddenly i found that Portal Content Tab (workset) disapper. How can i get back the same???
It means in Content Admin role the Portal Content workset removed.
Thanks,
Anumit

Hi Anumit,
Good that you have resolved youself.
Can you post what you have done to resolve. It will be real useful to many other SAPians.
Regards,
Kumar

PR Release date in TAB Quantity/Dates

Hi Experts ,
When i am creating a PR then In the TAB>Quantity/Dates the release date is coming same as the delivery date .
As per my opinion it by default should be same as the PR requested date .and when it release by( me54 or me55) .then it will update as the dated on which we are releasing the PR.
Please Suggest
Varun Bisaria

Hi Varun,
The field 'release date' is a bit confusing. It has nothing to do with
the date you perform the release strategy (transaction ME54 or ME55).
The help on the field tells you more about it.
The release date does not mean PR release approval date.
In PR table/EBAN-FRGKZ or ME53 screen you can find the 'release date',
then press F1 -> purchase requisition release date which means for the
material to be available on the date it is needed the PR must be release
on xx.xx.xx (date) (that's requirement date less GR proessing time, GR
proessing time, planned delivery time, and purchasing department
processing time).
In ME53 screen -> item detail -> MRP data block (include release date.)
click 'statistics' icon -> administrative data (include release ind. and
rel. strategy).
In ME5A -> press F1 on 'release date' of initial screen which have same
explain for this field.
There is no actual PR release date field in EBAN, so in PR display,
we can not see "actual PR release date".
BR
Nadia Orlandi

Regarding SMD --for Portal Monitoring

Hi,
Is there any advanced configuration for exclusive portal monitoring usin SMD??
Edited by: kris B on Mar 19, 2008 12:38 PM

>
kris B wrote:
> Hi,
>
> Is there any advanced configuration for exclusive portal monitoring usin SMD??
>
> Edited by: kris B on Mar 19, 2008 12:38 PM
*Is there no such thing as dedicated portal monitoring, or nobody has worked on it??*

How do I monitor running jobs in the Portal (or other J2EE)

How do I monitor running jobs in the Portal (or other J2EE), like SM66 in
R/3 ? We were having an issue that one "job" doing database work was
holding up doing any modification work in KM. The DBAs could see what was
holding this up in the database by not doing commits, but unlike R/3, I
can not find a way to tell what process is generation the database work.
Is there a monitor in J2EE or Portal that would provide this
information? This would be valuable in our Webdynpro for Java environment also.
Thanks for any guidance.

Hi,
You can monitor java using Visual Administrator tool and through CCMS RZ20.
Following PDF shows the JAVA monitoring tools availabe in SAP netweaver.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1f21b290-0201-0010-5c9b-e9f777c17902
http://service.sap.com/javamonitoring
Rakesh

SRM Portal home tab

SRM Portal home tab - the personalization tabs is repeated 6 times - in the 2nd level navigation- how can I fix that

Hi Azim,
I think the user Id thru which u r logging into portal has all authorizations made specific to different set of users like purchaser,buyer etc.
I meant ....in the roles assigned againt every user - access to user settings in personalization might have been included so better have a look at the roles assigned to the user ID
Regards,
Uzair

Release 1 Portal "monitoring tab" disappear in release 2 Portal

Similar Messages

Maybe you are looking for