Release 12.0.4 Upgrade - Missing Files

Has anyone encountered any issues with a 12.0.4 upgrade from 11.5.9 and missing Application files? If so, how were you able to resolve the issue. We've found instances of hard-coded Oracle Corp mount points for links and were able to correct those. The missing files are in a different directory from what the 12.0.4 patch driver is looking for. We're hesitant to just copy the files to the missing location.
thx,
John

The issue was that the 12.0.4 patch driver needs to be applied with the no copy and no generate options and skips the missing files. This is documented in the install guide but was missed. :-(
Thanks.

Similar Messages

11.5.9 to 11.5.10 upgrade missing file error - adrelink exiting status 1

I am in the processing of upgrading our system from 11.5.9 to 11.5.10.2 on a Linux 4.5 system.
While applying patches 4337683 I ran into missing files which required me to apply patches 2214446 and 2284692. After going through the steps on both of those patches I am still getting a missing file error when it tries to relink ENCACN.
I am getting the following error:
$APPL_TOP/sht/11.5.0/lib/rwave/libstd8s.a: No such file or directory
I have searched for anything referencing this particular file and can find nothing on the web. I also noticed that I have no rwave directory and I have also searched the whole partition and that file does not exist. I must be missing another patch that I can not find.
Can someone point me to the missing patch?
Thanks
Tim
Edited by: user12055581 on Nov 5, 2009 12:45 PM

Thanks for your help, that document worked great.
I have since experienced another issue now that is resolved. This issue is almost identical to an issue I started with originally.
When relinking ENCACN
a couple messages about "more undefined refereces to '__pure_virtual' follow'
/usr/lib/gcc-lib/i386-redhat-linux/3.2.3/libgcc_.so: undefined reference to 'dl_iterate_phdr@GLIBC_2.2.4'
I had originally gotten an error about GLIBC_2.2.4 that was corrected by
mv gcc gcc344
mv g++ g++344
ln -s gcc32 gcc
ln -s g++32 g++
in /usr/bin
My searches on this error seem to point to the same solution to fix this but it has been done. Is it perhaps a version problem the gcc344 and gcc32 were what I pulled from the website, are those based off of versions installed so they should be something different for my system?
Thanks again for the help
Edited by: user12055581 on Nov 6, 2009 12:14 PM

'WebLogic upgrade jar file' assemby missing 11.1.2.1

Hello all,
I was going through the Installation guide for installing 11.1.2.1 & found that in the required assemblies for foudation services there is a assembly called 'WebLogic upgrade jar file' mentioned in the tutorial. When i extract the foundation
files 1-7 I don't see that assembly in that extract. I even extracted the additional content release & i did'nt see that assemby in the folder where i extracted.
Thanks!

It is mandatory and yes extract it into the same folder. While they are improving the documentation in this release they did miss a pretty big dependency in the form of the Weblogic software.
You will want the following packages for a Planning installation:
Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.2.1.0 for Microsoft Windows (64-bit)
Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (64-bit) Part 1 of 7
Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (64-bit) Part 2 of 7
Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (64-bit) Part 3 of 7
Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (64-bit) Part 4 of 7
Oracle Hyperion Foundation Services Release 11.1.2.1.0 Part 5 of 7
Oracle Hyperion Foundation Services Release 11.1.2.1.0 Part 6 of 7
Oracle Hyperion Foundation Services Release 11.1.2.1.0 Part 7 of 7
Oracle Hyperion Calculation Manager Release 11.1.2.1.0
Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition Release 11.1.2.1.0
Oracle Essbase Release 11.1.2.1.0 Part 1 of 2
Oracle Essbase Release 11.1.2.1.0 Part 2 of 2 for Microsoft Windows (64-bit)
Oracle Essbase Clients Release 11.1.2.1.0
Oracle Essbase Spreadsheet Add-in Release 11.1.2.1.0 for Microsoft Windows
Oracle Hyperion Financial Reporting, Fusion Edition Release 11.1.2.1.0
Oracle Hyperion Financial Reporting Studio and Print Server, Fusion Edition Release 11.1.2.1.0 for Microsoft Windows
Oracle Hyperion Enterprise Performance Management Reporting and Analysis Core Components Release 11.1.2.1.0
Hyperion Web Analysis Release 11.1.2.1.0
Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1.0
Oracle Hyperion Planning, Fusion Edition Offline Planning Module Release 11.1.2.1 for Microsoft Windows
Oracle Hyperion Financial Close Management Release 11.1.2.1.0
Oracle Hyperion Enterprise Performance Management System Additional Content Release 11.1.2.1.0
Regards,
John A. Booth
http://www.metavero.com
Edited by: Jbooth on Apr 28, 2011 5:13 AM - Removed Weblogic specific package from list.

Spotlight Indexing, Systemstats, Missing File, All After Mavericks Upgrade

Dear Mac Support Communities,
The upgrade to OS X 10.9.4 has crippled my computer.
My main question is: should I reformat, or should I wait for a patch to come out to solve whatever is wrong with Mavericks? I explain below.
Spotlight is constantly indexing. The mdworker is all over the place on the Activity Monitor—4% and then it explodes to 85% of CPU usage. Systemstats kicks in randomly (connected to spotlight perhaps?) and eats up 90% of my CPU and 3gigs of RAM. Time Machine takes AGES to backup.
I have not been able to stop Spotlight's endless indexing. I have moved my hard drive and my Time Machine backup into the 'private' filter in 'Spotlight Preferences.' I have also tried the "sudo mdutil -a -i off" trick to stop indexing altogether. But Spotlight Indexing goes "off" and then automatically turns "on" in Terminal. Spotlight carries on, and the computer performance is choppy.
I've run disk repair. First, I repaired permissions. Then I verified and attempted to repair the the hard drive. There is a missing file apparently, and I therefore must reformat. This is very first issue I've ever had with the hard drive since I bought the computer. Considering how awful Mavericks has been—I have been reading other Support Communities posts—I'm nervous about something going wrong, or that all these problems will persist after the reformat.
All of this has occurred three days after my upgrade to to OS X 10.9.4. I have heard of numerous people having problems with Mavericks. All similar problems concerning missing files, haywire spotlight, systemstats devouring any remaining CPU power and memory space, and slow Time Machine back-ups.
Anyone with the same problems? Care to theorize some solutions?
I have a late 2008, 15inch MacBook Pro., 2.53 GHz Intel Core 2 Duo, 8 GB 1067 MHz DDR3, running OS X 10.9.4 (13E28).
Cheers! I appreciate the help.

Older Macs have more troubles under Mavericks. Considering the age of your Mac, it's not uncommon to start have hardware issues like drive failure.
To repair the drive you must boot from the Recovery Drive.
Boot into the Recovery Drive by holding down Command R when restarting.
Run Repair Drive and Repair Permissions using Disk Utility in Recovery.***
Next Reset Home Directory Permissions and ACLs following directions here This will serve two purposes. It will reset YOUR permissions. Not the same as Disk Utility reset permissions and it will cause Spotlight to re-index your drive when restarting.
Restart
Download and run the combo updater to refresh your OS X files.
OS X Mavericks 10.9.4 Update (Combo)
http://support.apple.com/kb/DL1755
MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install.
"Delta" updaters can only take you from one version to the next. For example: 10.9.3 to 10.9.4. If somehow the 10.9.3 is missing something it should have, and that something isn't changed between 10.9.3 and 10.9.4 it will still be stale after the delta update.
***If Disk Utility is unable to repair you will have to copy your data to an external drive first. Reformatting will erase the drive. You should have a backup regardless, if your data is important to you. Just like a seat belt and an air bag protect you in different ways when driving, you need both Time Machine and a clone for full protection. If you don't have an external drive for backup, I can give you some suggestions to get you started.
Both of these applications can be used to create a clone.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html

ITunes post-upgrade: "Required files are missing"

I just went through the process to install the latest upgrade, but there was some sort of problem with the installer. Rather than installing the upgrade, it apparently just deleted important files and then failed before replacing them. Now when I try to launch the program I get the message "iTunes cannot run because some of its required files are missing. Please reinstall iTunes."
Here's my question: If I download and reinstall iTunes, will the installer be smart enough to recognize and preserve the good files that remain? I want to solve this in a manner that will maintain all my settings and file associations. Any help would be great.

It would be great if I could get an answer on this. As stated in the previous post, my iTunes will not start due to missing files from a botched update. Furthermore, when I downloaded the latest version to reinstall, it did not appear to recognize my previous installation.
Is there a way to automatically or manually repair the problem? Can I copy certain current files and replace them once I've reinstalled?

Missing files after upgrading to lr 2.3

lr 1.4 starting acting odd a couple days ago when certain photos in certain folders when clicked on and viewed in the filmstrip mode suddently changed right in front of me. they were cting like the syn mode was stuck in +20 wb. as soon as the change occured on each file there appeared an error message above it with 3 straight lines and an exclamation mark saying metadata had been charged. so i figured it was finally time to upgrade to 2.3 which i did by trying the trial issue just to see if the files showed up normal or appeared corrupted or changed too. well it got worse when the new catalog automatically loaded and of my 25,000 images nearly all say photo missing. this wouldn't be a problem if this was a couple but it is most of the catalog. i did a back up before the devil took over my machine and started changing the metadata. so i have that if i knew what to do with that info.
I was hold on the phone to tech support from 6-7 last night and have been on hold with tech support since 10 am and it is now 1:30 on the west coast. I can't do much of any of my work as all my files, editing, printing are tied to LR. i got desperate and even tried creating a new catalog but when i clicked the photos on my tree in explorer to add them to a new catalog lr couldn't see them. i have avg software and no virus, i can see my photos in explorer, adobe cs3 and in bridge. i haven't changed the placement of the folders on my computer, any changes i have done have been within lr and they were mainly adding new meta tags which also didn't come thru and renaming some of the files from 2009-3-9 to adding pt scenery etc.
i'm totally frustrated, i have spent so much time on hold i had to run out and spend $40 to buy a land phone so i could sit here without my phone battery dying. any suggestions while i sit here? i'm afraid to hang up on cs as i have been disconnected twice and they must have some sort of order in answering however at this point in time i can't figure it out.

i have been so busy trying to find the files i just went back to some older files and found that the same rendering problem still exists. i open a folder click on a photo in the filmstrip and it automatically changes before my eyes, for a second i see a message that says rendering setting changed. i didn't touch a thing it just does it. i have gone into the syn and checked that everything is unchecked and it still happens. is there some other place for the rendering setting to be changed? it can't be a preference that i've accidently changed?
For those photos that are changing, I can think of two things that it may be:
If images are edited outside of Lightroom (in Camera Raw, etc), that can change the metadata (or Develop settings) of the file. When you view the file next time in Lightroom, the new conflicting settings are applied to that photo.
When raw files are imported into Lightroom, they initially appear with the embedded camera-generated JPEG preview. After that, Lightroom generates its own previews which typically look different than the original ones.
Not sure if it's either one of those.
so you think i can just click on your link and do the 2.4 update and things should work? i'm just not sure i want to do a backup with all the missing files, won't 2.4 open up with all the same problems or do you think the file naming issue will be corrected?
I'm not saying that upgrading to 2.4 will necessarily fix the way things are now. I doubt that it would make it worse, though. I think you should make sure your photos and catalog are backed up, which it sounds like you said they are, then upgrade to 2.4 (if you're not already running that version).
After the upgrade, you can go through your catalog and clean things up.
-Scott

Missing Files after Lion Upgrade

After upgrading to Lion I am missing files from a folder named "printers" I had created. The previous os used a "printer" folder but not "printers". It seems as if the Lion operating system deleted the existing folder and placed new files in there. I've searched the computer after enabling hidden files to no avail. Any ideas as to how to recover the files?
Thanks

Where had you put that folder?
If in the top-level System or Library folder, that's why; those were replaced by the Lion installer, since we mere mortals are not supposed to fool with them.
Restore it from your backups, but put it somewhere else; either in a user home folder or the special Shared user folder.

Can't open iphoto in airbook. Asking to upgrade then says must rebuild library then warning about missing files. When click rebuild all I get is continued- waiting for iphoto library- and, never rebuilds

can't open iphoto in airbook. Asking to upgrade then says must rebuild library then warning about missing files. When click rebuild all I get is continued- waiting for iphoto library- and, never rebuilds

-1.The photo library needs to be upgraded to work with this version of iPhoto.
Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
2. iPhoto is unable to open this library.
The library has issues that require rebuilding to correct
3. Warning
Would you like to rebuild the library "iPhoto Library"?
The library "iPhoto Library" is missing required database files and must be rebuilt before it can be opened.
4. Waiting for iPhoto library
iPhoto will open as soon as the iPhoto library is available
Time Machine might be backing it up

Upgrading iTunes missing file?

Hi I am having trouble updating itunes from my older version. I seem to be missing a file 'i Tunes.msi'. I then tried uninstalling with view to download latest version to intall. But system cannot uninstall due to this missing file?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

"Itunes missing files - please re-install"

Hi I wonder if anyone can help me. I am having major problems ever since i downloaded the newest update. Cant access my itunes now as keep getting a message that says there are files missing and that I need to reinstall itunes. Have tried over and over to re-install but still keep getting the same message!! Many thanks,

Aichenelf,
I cannot thank you enough for your post! I upgraded my iTunes because some of the freebie songs on Tuesday said they required a higher version of iTunes. Wow! The two weeks since that fateful day have been filled with problem after problem. The 7.5 would not work on my machine, and I got the same "missing files" error. I also got errors that said the QuickTime would not work and that iTunes required QuickTime. I uninstalled all Apple products and tried to reinstall older versions but was not allowed to by the software. I was pulling my hair out. Finally, I read somewhere to go to the directory called WINDOWS\Downloaded Applications\ and to delete any previous versions of iTunesSetup.exe. I also obtained the version 7.2 of QuickTime by itself and installed it on its own. Then, I reinstalled 7.4.3. It took tons of time and tons of trial-and-error to resolve this ridiculous issue. I say "ridiculous" because there is no reason that I can see for artists to insist that their fans use the most recent version of a software. Not everyone can afford to go out and get a new computer to run all this stuff. I digress --> Free or not, I won't go there again. Thanks for listing the older software verions' release numbers ... Made my life a lot simpler. I obtained my older versions by doing a Google search that led me to a place called the File Hippo. Anyhow, hope this can help others who got into the same situation! Back up your library before uninstalling, too! I renamed mine to simply "Music" and have successfully reimported it since the fix. Not sure if my playlists are gone forever, but can recreate them a lot easier than reloading music. Peace & good luck ... I know how frustrating this is !!!

Adadmin error when run check for missing files

Hi All,
When i run adamin for checking missing flie option it return the error
Unable to verify files for iSupplier Portal.
AD Administration error:
The following file is missing:
/m01/TEST/apps/apps_st/appl/pos/12.0.0/admin/driver/posfile.drv
My EBS version is :R12.1.3
when i checked files existed in $POS_TOP there are only three subdirectories available i.e. log mesg out
when i checked in one of the older server in mean R12.1.1 all files existed in POS_TOP i.e. admin help html java log mds media mesg out patch sql xml
Can i copy all the files from old server(12.1.1) to produciton(R12.1.3)
Due to this error JAR files cannot be generated
Thanks
Alig

Was this 12.1.3 instance upgraded from the same copy of 12.1.1 instance you have?
Can i copy all the files from old server(12.1.1) to produciton(R12.1.3) They are different releases. However, you could try copying the files and see if this helps. Are you using this product?
Due to this error JAR files cannot be generatedWhat is the error? Copy the missing files/directories for now and check then.
Thanks,
Hussein

Re-install 10.4.7 update if installed version with missing files?

I notice that this forum mentions that Apple will correct their faulty Intel 10.4.7 update with a new release.
http://www.appleinsider.com/article.php?id=1852
A version with SHA1 checksum matching the description of the new release is show on:
http://www.apple.com/support/downloads/macosxupdate1047intel.html
I upgraded my MacMini Core Duo on 6/29. Should I download and re-install this update? Wait for Apple to come out with a patch? Anyone done this?
How can I determine if I have the install with the missing files?
Thanks!

Looks like the new release came out June 27, 2006. You could always reapply the combo update. It won't hurt.

How to fix 'missing files' in Lightroom 4? [was: adobe lightroom 4]

Hi,
I have the scenario whereby all the images, I assumed, on my hard drive were as I imported to my catalogue. but it now appears that all of my images, are showing as previews but some are showing as 'missing files'. Attempts to reconnect are proving futile as the usual click on and find previous file location location point me to the 'c' drive with a request for the file name. On doing this, the 'C' drive doesn't appear to the have file name I require. Have I in-advertately scrubbed something? I have a lot of images of my grandkids, some of which I can delete but there is one particular image of my premature born grandaughter in the hospital I really need to keep.
I can't do any saving, moving of files whilst these question marks are in place, can someone help as this software, is not as user friendly as I first assumed. All I want is a simple walk thru explanation of saving images from a camera and sorting of existing HD files,(many from past shoots on different cameras), to enable me to sort into some kind of format.
Would it be a good idea to completely scrub all of my images from the 'C' hard drive, (I have a backup on my external deskstop drive), and start afresh?
I have a external drive connected to my laptop and all those images are showing ok with no missing file links. It's only the laptop internal drive that is showing the problem.
any help would be a bonus as the online youtbe video instructions don't answer my problem.

Thanks Jim for your response,
I will upgrade to 5.3
Kind regardsEut van Berkum
Op woensdag 28 januari 17:04 2015 schreef JimHess <[email protected]> het volgende:
how to open NRW-files in Lightroom 4?I
created by JimHess in Photoshop Lightroom - View the full discussionThe only way to use those files with Lightroom 4 is to convert them to DNG using DNG converter 8.3 or higher. The camera wasn't supported in Lightroom until version 5.3. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7140310#7140310 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7140310#7140310 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Missing files Lightroom 3 and OSX 10.9.5 - how do I fix this? PLEASE

Hi Mr. Jim. I am having very similar problems with my Lightroom 3. I recently updated my Mac OSX to 10.9.5 and since doing so my photos are missing or offline and I cannot import from any source, even my Canon. I found updates on Adobe that take it up to 5.6 but when I downloaded it, it seems to have downloaded the Lightroom 5 version. It requires a serial number to use so.... that does me no good. So then I downloaded the update 3.6 and opened it but it did not seem to apply itself to my Lightroom program because it still says Lightroom 3.2... I hope that all made sense. So I guess firstly, is there a way to upgrade it to another version without buying a serial number? If that cannot be done, could you or anyone else help walk me through my Lightroom issues?
I tried your solution up to Ctrl+click Import but there is not a selection for "Update Folder Location". I made the 3 new folders and I am stuck at this part of your process.
I currently have 5791 missing photos and I need help . I did read that the bridge between the files on the HD and the files in Lightroom get messed up if they are moved and you have to track them down but I cannot seem to do that because when I found some of the "lost" files the contents were all grey and un-clickable.
Message was edited by: Geoff Walker
I branched this off from another thread so it is more visible

Please read this: Adobe Lightroom - Find moved or missing files and folders
You do not want to be in the Import section of Lightroom, you want to be in the Library Module. You don't want "Update Folder Location", you want to ctrl-click on a Folder name (not in Import, but in the Library Module Folder Panel) and select "Find Missing Folder"
You do not want to re-import photos that have already been imported, this is almost always a bad thing to do.

Missing files in Photoshop Elements 8

I just upgraded from PSE 7 to PSE 8. All photos in PSE 7 are viewable, crisp and clear (about 7000 photos going back to year 1999). Each year I make new folders of the events for that year and keep them under my Photos folder on my "D" drive (have one HD partitioned into a "C" and "D" drives).   In 2010, I made folders for various events and titled them according. Example are 2010 - Easter; 2010 - Hawaii, 2010 - Convention, etc. All of the earlier photos (prior to 2010) for 2009 and earlier years "converted" without any apparent problems in PSE 8. Several of the 2010 folders also converted without any problems, but the three most recent folders of photos show as blurry thumbnails in the PSE 8 Elements Organizer screen and when clicked on say "searching for the missing file". The file cannot be found.
As far as I know there is no difference from the way these 3 folders of photos are titled and were imported into PSE 7, where they continue be viewable as sharp photos. In other words, in PSE 7 there is no problem but in PSE 8 these three files of photos cannot "be found".
Anyone have any idea what the problem is and how to overcome it? If not, then I guess it was a mistake to upgrade from PSE 7 to PSE 8 as PSE 7 is working perfectly. Best bet is just remove PSE 8 until this problem is fixed???
Running Windows Vista Ultimate.

Found the solution. I cloned the drive like you did and PSE became confused since there are now two drives with identical volumeid. It kept pointing to F: when I wanted to point to C:.    I cloned C: when I installed F:    so both F: and C: now has the same volumeid. Download volumeid from microsoft and verify that they are have the same volume id by typing vol C:    and then vol F: . After verifying that they both indeed have the same volumeid, type volumeid F: 1111-1111. Basically change the volume id of F: to 1111-1111. Reboot and PSE should now point all the files to C:
See here for more detailed explanation:
http://johnrellis.com/psedbtool/#_Detecting_Problems_with

Release 12.0.4 Upgrade - Missing Files

Similar Messages

Maybe you are looking for