Release 12 Vision - Access Application Server Control Error

I have installed eBusiness Suite Release 12.0 Vision demo database. All is working fine. However when I try and access the Application Server Control the page is not displayed. From my research it is clear that this component is installed with OC4J and should be available in the eBusiness Suite environment. I have tried to access the URL http://server.domain.com:port/ascontrol. The page retuned says 403 Forbidden. I have checked and all the OC4J instances are running and opmn indicates that ascontrol is running.
Not sure if I have the URL incorrect or a configuration issue.
Can anybody help with this?

I am using the assigned HTTP port. In my case I choose the port pool during rapid install that assigned 8001 to the HTTP listener.

Similar Messages

  • Username to Access "Application Server Control"

    Hi,
    We are using,
    EBS : 12.1.1
    OS : OEL 5.6
    Database : 11.1.0.7.0
    I want to deploy web services on Application Tier. For that i have started iAS Console using following commands on Application Tier,
    1. Sourced env File of Application Tier
    2. $emctl start iasconsole
    Using above command iAS Console started successfully. Now while accessing url (http://hostname:1156/emd) it asks for Username and Password with following message,
    The Servertestapp.onwardinfosys.com at enterprise-manager requires a username and password.
    Warning: This server is requesting that your username and password be sent in an inseure manner(basic Authentication without a secure connection)
    Username :
    Password :
    Can anyone tell me which username and password credentials are required to access Application Server Control page ???
    Regards,
    Priyanka

    No I am not getting any errors. Login page accepts Username and Password of user "ias_admin" and redirect's to Application Server Control Page but page shows just APplication Server and no information of it...
    Information i gor after click on "About Oracle Enterprise Manager 10g Application Server Control",
    About Oracle Enterprise Manager 10g Application Server Control
    Oracle Enterprise Manager 10g Application Server Control     10.1.2.3.0
    Supported Target Application Servers                    10.1.2.3.0
    Accessibility Mode                              Disabled
    "Accessibility Mode" is coming as "Disabled"... How to enable that?? Is their any confiuration required to setup Application Server Control for EBS R12 ??? Please guide..
    Regards,
    Priyanka
    Edited by: Priyanka Pawar on Apr 9, 2012 11:17 AM

  • Error accessing Application Server Control Console

    I just downloaded oc4j_extended_101330.zip and installed it at
    /u01/app/oracle/oracle/product/10.2.0/oc4j
    I then ran the following commands:
    export ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/oc4j
    export J2EE_HOME=$ORACLE_HOME/j2ee/home
    export JAVA_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1/jdk
    export PATH=$JAVA_HOME/bin:$PATH
    java -version
    java version "1.4.2_08"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
    Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)
    cd $J2EE_HOME
    java -jar jazn.jar -activateadmin <password>
    cd bin
    ./oc4j -start
    Once the server was up and running I went to http://localhost:8888 and saw the ocj4 home page. Then I tried to access the Application Server Control Console at http://localhost:8888/em and received an internal server error 500. The logs reported this exception:
    08/02/20 13:38:59.807 ascontrol: Error initializing servlet
    java.lang.NoClassDefFoundError
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:141)
    at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:62)
    at java.awt.Font.initializeFont(Font.java:308)
    at java.awt.Font.<init>(Font.java:344)
    at oracle.sysman.ias.studio.app.StudioConsole.loadFont(StudioConsole.java:292)
    at oracle.sysman.ias.studio.app.StudioConsole.init(StudioConsole.java:107)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2371)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4824)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4748)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2971)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:741)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:534)
    I believe I've followed the installation and startup directions correctly. Any thoughts on what I might have done wrong?
    Thanks

    Hi,
    It works with jdk 1.5 corect. With java 1.4.2 try to run oc4j using this command:
    OC4J_JVM_ARGS=-Djava.awt.headless=true ./oc4j -start
    Regards,
    Tomas

  • Application Server Control - Servlet error: Error instantiating servlet

    After migrated oracle ias to 10.1.2, I have problem access Application Server Control <serverip:1810>. The error from the web is
    "500 Internal Server Error
    Servlet error: Error instantiating servlet 'console' (servlet class not found, make sure it exists at /oracle/iasdev/sysman/webapps/emd/WEB-INF/classes/oracle/sysman/eml/app/Console.class, in a jar in /oracle/iasdev/sysman/webapps/emd/WEB-INF/lib/, in an orion-web.xml specified classpath or global server classpath)
    I checked in /oracle/iasdev/sysman/webapps/emd/WEB-INF/lib/, there are may .jar files as below
    bc4joem.jar
    d4o.jar
    disco_dsc.jar
    disco_dsc_smi.jar
    discoconfig5.jar
    emd.jar
    emdjsp.jar
    formsConfig.jar
    frmem.jar
    frmem_jsp.jar
    frmemplugin.jar
    iview.jar
    jcb.jar
    junit.jar
    log4j-core.jar -> /oracle/iasdev/sysman/jlib/log4j-core.jar
    ojpse_2_1_5.jar
    oracle_forms_rb.jar
    portalEMD_jsp.jar
    reportsConfig.jar
    reports_emd.jar
    reports_emdjsp.jar
    ssoEMD_jsp.jar
    ultrasearch_emdjsp.jar
    usca.jar
    webcachecfg.jar
    wireless_admintool.jar
    wireless_sysmgr.jar
    I wonder any settings need to be fixed/added ? please help ?

    Do you think you can reconfigure the EM, using something like this below, actually i use this for Database, but I am sure with few changes you should be able to reconfigure application server EM.
    $ORACLE_HOME/sysman/admin/emdrep/bin/RepManager -connect <TARGET>
    -sys_password <password> -action drop emca -config dbcontrol db
    -repos create –cluster
    Thanks
    Amit

  • Application Server Control Console page error problems

    Hi All,
    I am getting the following error when i am trying to access the application server control console page
    EMDAEMON
    HTTP/1.1 404 , Not Found
    the oracle management port number is 1157
    enterprise manager agent port is 1830
    when i checked emctl status iasconsole and emctl status agent both are running actually
    enterprise manager server control port is 1156(infra) and 1158(midtier)
    all the ports are different but i am getting problem still. Please let me know whats wrong.
    Thanks

    Using the right URL?
    In each <oracle home>\install\setupinfo.txt, there should be a line that says:
    .... Use the following URL to access the Oracle Enterprise Manager Application Server Control: http://xxxxxxx.xxxx.xxx.xxx:nnnnn
    If the URL is correct then you need to look deeper - are you connecting to the Enterprise Manager (EM) from the server console? From a PC elsewhere on the LAN and possibly subject to your local workstation security policies, firewall or internet proxy ?

  • Displays blank page when tried to access ORACLE Application Server Control

    Hi,
    I have successfully installed the Oracle SOA Suite using advance installation.
    But when tried to open ORACLE APPLICATION SERVER CONTROL by following the below path.
    start-> programs-> oracle-soa->ORACLE APPLICATION SERVER CONTROL, It displays a blank IE page.
    But when tried to open BPEL control or WSM control or ESB control, it takes me to the login page.
    Note: Started the SOA suite and the status of ASG component in the Start SOA page says Down.Does this affect in anyways?
    Would appreciate if anyone could throw some light on this.

    Hi All,
    I started reinstalling SOA suite and while installation, I encounter below warning.
    "A DHCP configuration was detected on this host" The installer also detected that the localhost name and network hostname differ. please resolve the networking issues by reffering the "Installing on DHCP computers" section in the installation guide."
    Note: Doing installation in the server.
    Wondering this could be the cause for displaying blank Application Server Control page.
    And here is, what it says in the installation guide.
    Note this limitation when running Oracle Application Server on DHCP computers: Oracle Application Server instances on DHCP computers cannot communicate with other instances running on other computers. For example, you cannot have OracleAS Infrastructure on one computer and a middle tier on another computer if any one of those computers uses DHCP. All the instances that need to communicate with each other need to run on the same computer. There are no limitations on clients: clients from other computers can access the instances running on the DHCP computer, as long as the client computer can resolve the DHCP computer on the network.
    The solution for this is installing loopback adapter. But the catch is, I have few webmethods running on the server. Wondering about the effects of Loop back adadpter on webmethods. Please someone throw some light.
    Regards
    jude.

  • Having a problem accessing OEM 10g application server control console!

    Hi everyone,
    I just installed AS 10g (10.1.2.0.2) Forms and Reports Services Standalone on a Windows 2003 machine. The installation went fine, the instance was created successfully.
    I started all the services, when i try to access EM :
    http://fms-as.mathtechinc.com:18100. I get a blank screen.
    I can get to the AS welcome screen by using http://fms-as.mathtechinc.com:80, but when I click on the link to log on to Oracle Enterprise Manger 10g Application Server Control. I still get a blank screen.
    I checked the port numbers in port.ist.ini and the port for
    application server control port =18100.
    I am not sure what I am doing wrong.
    Thanks for your help in advance!

    Thanks Jacco... now It is asking for the user name: and password. I do not remember assigning a user name. When I installed the AS, I created an
    instance name and isa_admin password.
    I tried to use the instance name as the username it was not accepted.
    Thanks again!

  • Remote access database using Application Server Control Console

    When I install the Oracle Application Server 10g, it gives me a web-based tool, i.e., to use the Application Server Control Console to manager/monitor the server.
    Now If the Application Server is installed in a remote location, and there is no LAN connection to it, can I still access it via the Application Server Control Console? (i.e., via the HTTP protocol). (I believe that I can only use the Console to manage the AS which is physically located in the same machine).
    Thanks
    Scott

    Hi Scott!
    The ASC will allow you only to manage its own installation. So if you have 10 AS instances you will have 10 ASC's to manage it.
    If you want to remotely manage your installations you need the Grid Control.
    Otherwise you will need a connection to the machine.
    I do not understand the issue about the "no LAN connection"? How do you want to access the machine if there is no network connectivity anyway?
    cu
    Andreas

  • Problems in starting up Application Server Control from SOA Suite

    I have an issue starting up the Application Server Control page from the SOA Suite (10.1.3.1.0) welcome page. I can open all other control pages by entering the oc4jadmin/<password> where <password> is the password specified at the time of installing (Standard Install) the SOA suite.
    Application Server Control accepts the oc4jadmin/<password>, but shows another page to "Supply Administration Credentials". The following error message is shown on the page.
    +++++++++
    This OC4J is configured to make JMX connections via RMIS and fall back to RMI if the RMIS port is not configured. The RMIS connection on the OC4J instance home on Application Server shara.SHARA_HP is configured but a connection could not be established. The JMX protocol is specified by the oracle.oc4j.jmx.internal.connection.protocol property in opmn.xml
    You are logged in as oc4jadmin.
    Enter the credentials for a cluster-wide user in the oc4j-administrators group. These credentials are needed by Application Server Control to make remote connections.
    * User Name
    * Password
    [Store Credentials} button
    ++++++++
    Has any one encountered this? Any clues where to look for things? Initially I had the problem with all the controls due to my computer name as it has an underscore ie., SHARA_HP. I had to use localhost to overcome this ie., http://localhost:8888/em
    Any help/clue would be appreciated.
    Thanks
    Maha

    At install time there is a question that asked if you would like to configure adminstration now. (Something like that). By default this is not checked. If you did not check it you cannot access enterprise manager.
    The is probably a way to configure it, but it might be faster reinstalling.
    There is a simple way to de install by going to the ORACLE_HOME/bin and run the deinstall script.
    cheers
    James

  • Unable to get 10g application server control page

    Need Urget help
    hi
    Operating system windows 2003 with sp1
    Application server 10g-- v 10.1.2.0.2
    I have installed both 10g application server infrastructure and middle tire sucessfully on the machine with all the components sucessfully installed without any component failure or error.
    i can access welcome page on
    http://localhost:7777 or
    http://hostname.domainname:7777
    sucessfully but when i try to login to application server control from welcome page
    it directs me to http://hostname.domainname:18100 but doesnot display any page
    no error just blank page with status done at status bar.
    -- but i can access server control page using
    http://hostname.domainname:18100/emd/console
    login sucessfully after entering username and paswword
    but why i can not access it just by specifiying
    http://hostname.domainname:18100 also when i try to start or stop any components no response after pressing stop/start/restart button available.
    -- same problem with
    http://localhost:7778/forms/frmservlet no button shows any response or any error on configuration or on any other components web page.
    i checked all almost every thing
    all services or running sucessfully
    plz i need ur help.

    I saw this on another windows machine as well. I believe that the port should be 1800 and not 18100. Look into the emd.properties and check if they are configured correctly.
    cu
    Andreas

  • RE:Application Server Control Configuration Assistant":

    Hello all!
    I'm trying to install Oracle 10g reports server but get the following error
    ================================================================================================================
    Output generated from configuration assistant "Application Server Control Configuration Assistant":
    Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    http://user-4ad84a81a7:18100/emd/console/aboutApplication
    Starting Oracle Enterprise Manager 10g Application Server Control ..The OracleFRHome2ASControl service is starting
    The OracleFRHome2ASControl service could not be started.
    A service specific error occurred: 2.
    More help is available by typing NET HELPMSG 3547.
    I then tried checking on the Net for solutions and some people were advising to unplug network cable, etc but this didn't help me.
    Any other ideas plz?
    Thnx in advance

    This is wat i get.
    C:\oracle\FRHome_3\BIN>emctl status agent
    Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    Agent Version : 10.1.0.4.2
    OMS Version : Unknown
    Protocol Version : 10.1.0.2.0
    Agent Home : C:\oracle\FRHome_3
    Agent binaries : C:\oracle\FRHome_3
    Agent Process ID : 3496
    Agent Process ID : 3496
    Agent URL : http://user-4ad84a81a7:18122/emd/main/
    Started at : 2008-11-20 08:33:19
    Started by user : SYSTEM
    Last Reload : 2008-11-20 08:33:19
    Last successful upload : (none)
    Last attempted upload : (none)
    Total Megabytes of XML files uploaded so far : 0.00
    Number of XML files pending upload : 0
    Size of XML files pending upload(MB) : 0.00
    Available disk space on upload filesystem : 16.48%
    Agent is Running and Ready
    C:\oracle\FRHome_3\BIN>emctl status dbconsole
    OC4J Configuration issue. C:\oracle\FRHome_3/oc4j/j2ee/OC4J_DBConsole not found.

  • Application Server Control Console

    I am trying to change my administrator's password in the OC4J server..
    The response message was:
    This option has been deprecated.Please start the OC4J server to set the administrator's password. If the OC4J administrator accound has already been activated, use the Application Server Control Console or the Admintool to change the password for this account.
    How can i access the Application Server Control Console or Admin Tool?
    What is the exact path?
    Im stuck in here please help...

    Hi Hussein,
    according to the note
    NOTE : Using AS Control with EBiz R12 is NOT FULLY SUPPORTED.
    so i would not want to activate it.
    would you please give me advice on the note below note.
    i am upgrading ebs r12 12.0.6 to r12 12.1.1
    in the process, if my ebs r12 using EJB then i must undeploy the application first before before applying the patch.
    ---How do i know if EBS r12 12.0.6 using EJB or not ???
    Thanks for your help.
    Regards,
    Tom
    5.1.2 Apply Oracle Application Server 10g Release 3 (10.1.3) Patch Set 4
    (10.1.3.4.0)
    The following procedure describes how to apply the patch set:
    1. If you are applying 10g Release 3 (10.1.3) Patch Set 4 (10.1.3.4.0) to a 10g
    Release 3 (10.1.3.0.0) Oracle home and your system uses Enterprise Javabeans
    3.0 applications, then you must undeploy your applications before applying
    the patch.
    This step is not necessary if you are applying the patch set to a 10g Release 3
    (10.1.3.1.0) or 10g Release 3 (10.1.3.2.0) Oracle home.
    The following procedure describes how to undeploy the applications:
    a. Log in to the Application Server Control Console as the same user name
    as the one used for the original installation. If the application is deployed
    to a specific OC4J instance, then navigate to the OC4J Home page for the
    See Also: "Introduction to Backup and Recovery" in the Oracle
    Application Server Administrator's Guide for complete information
    about Oracle Application Server Backup and Recovery.
    11
    OC4J instance. If the application is deployed to a group, then navigate to
    the Group page.

  • Oracle HTTP Server & Application Server Control Console

    I have installed Business Intelligence and Forms. (10g Release 2 (10.1.2))
    Which user I should use to access to the following urls:
    Application Server Control Console
    //abcd.ash.adef.org:1810
    Oracle HTTP Server & the welcome page
    //abcd.ash.adef.org:7778
    Please also tell me what is the default single sign on user name.
    D

    its done.
    I got it

  • Oracle application server control white screen problem

    Hi,
    I have installed Oracle Application server 10g. Both the infra and mid tier are running from the
    same machine.
    I am able to login to application server control from http://riysvdwh-004:7777, but
    unable to login to the application server control from http://riysvdwh-004:7778,
    i can login to portal and discoverer from the second link, but when i click on"log on to
    Oracle Enterprise Manager 10g Application Server Control:" i get a white page and 5-6
    pipe symbols moving at the top left of the screen and i dont get the next screen.
    I have checked the setupinfo.txt file in midtierhome/install location and found out that
    the hostname in the database connection string is different, instead of hostname riysvdwh-004
    , it is riysverp-004,
    Use only SSL connections with this Oracle Internet Directory:No
    Database Connection String: riysvdwh-004:1521:ASDBDEV.riysverp-004:ASDBDEV.riysverp-004
    Use the following URL to access the Oracle HTTP Server and the Welcome Page:
    http://riysvdwh-004:7778
    i think this could be a reason why i am unable to login from port 7778.
    Is there a way to make this work.
    would appreciate some suggestions.
    regards,

    1) Look in the $ORACLE_HOME/install directory ... ports used for the various functions such as EM are usually listed in the portlist.ini file in each Oracle Home
    2) Ask in the App Server forum. There is an assumption that questions in the Database forum are primarily focussed on Database issues. <g>

  • Problem in starting Application Server control

    Hi,
    I have installed Oracle BI. But when Iam trying to configure the discoverer catalog, I could not able to connect to the Application server control. Please advice with which login credentails I need to login to the Application server control.
    Thanks
    venkat

    To connect to the App Server control, you need to login with the id ias_admin. The password is whatever you specified during the installation process. The port number to use would have been displayed at the end of the installation process.
    Help on how to configure the Discoverer catalog is available in Ch 6: "Configuring the Discoverer Catalog and Discoverer Plus OLAP", of the Oracle® Business Intelligence Discoverer Configuration Guide, 10g Release 2 (10.1.2.0.0), Part No. B13918-02, available at http://download-uk.oracle.com/docs/cd/B14099_09/bi.1012/b13918/disco_catalog_config.htm#CJAHAHGH
    Thanks
    Abhinav

Maybe you are looking for