Release 15, Expression builder for custom fields??

I am currently setting up a client with Siebel CRM On Demand. The customer is envisioning tracking quantity sold monthly, and would like unit specific. I would ideally like to set up custom fields, for units, and another for revenue. In our demo account, I am able to create custom fields and assign it a field type and create a custom function in the default field.
However, I noticed in the client's release of Siebel CRM there is NOT the same functionality to create mathematical expressions for a custom field? Does anyone know what happened to this functionality? Is there a way to work around it? I need ideas people!?!
-Nicole

Even though I did post this to the wrong section, however I did find my answer.
It is called Advanced Field Management, it is a feature that needs to get turned on by Customer Service for the client account.
Thank you

Similar Messages

  • Master Datasource Update for custom fields

    I have a standard master data source for 0customer, I need some custom fields that are enhanced in the same SoURCE TABLE KNA1. please let me know if
    1.  i can create the generic data source Z_DS_CUSTOMER for custom fields only from KNA1
    2. Create transformation 1 to Map the data source Z_DS_CUSTOMER to Ocustomer to load the custom fields only and set no transformation for other standard fields
    3. Create transformation 2 to Map the data source 0customer_attr to same Ocustomer to load the standard fields.set no transformation for other custom fields
    4. Then Load via DTP Standard fields first via transformation 2
    5. Then Load via DTP custom fields first via transformation 1
    Will the above will work fine, and I can avoid any enhancement to master datasource 0customer_attr
    please help me with solution.
    Regards
    Soniya
    null

    Hi all my dear friends,
    I have seen the recommendation by my SAP collegue and Anil
    1. infoobject as Target and
    2. in between Standard DSO
    1 transformations as you mentioned from 1 IS
    3. Common Info source
    2 transformations as you mentioned from 2DS
    4. Datasources (2no's ) as source to splly to data to DSO
    <b>Please tell me what is the need to do all the above why can't I feed directly the Infoobject with the below PLEASE tell me what will be the bad impact on design if I do the below</b>.since my client is asking<b> justification for build of each BI object</b>
    1. infoobject as Target and
    1 transformations as  mentioned from 1 IS
    2. Common Info source
    2 transformations as mentioned from 2DS
    3. Datasources (2no's ) as source to splly to data to DSO
    I am not going for enhancement since it is not populating the datasource in rsa3. if you can correct that it would be great.
    I have the same code for all custom fields none of them is working no records are pulled in RSA3 For custom field ZZSTAT.
    Please help me with this
    Thanks
    Soniya Kapoor
    *data: l_BIW_KNA1_S like BIW_KNA1_S
    *case i_datasource.
    *WHEN ' 0CUSTOMER_ATTR'.
    *loop at C_t_data into l_BIW_KNA1_S
    *l_tabix = sy-tabix.
    *clear  I_KNA1.
    *select single * from KNA1 into i_KNA1 where kunnr = l_BIW_KNA1_S-kunnr.
    *if sy-subrc = 0.
    *l_BIW_KNA1-ZZSTAT = I_KNA1-ZINSTAT.
    *modify C_t_data from l_BIW_KNA1 index l_tabix.
    *endif.
    *endloop.
    *endcase.

  • Reg : F4 help for custom fields in ALV report

    hi friends..
    in my internal table i have fields including 1 custom field..
    DATA : BEGIN OF i_final OCCURS 0,
      pernr LIKE p0000-pernr,
      begda LIKE p0000-begda,
      plans LIKE ZPOSITION-plans,  (custom)
      werks LIKE pspar-werks,
      end of i_final.
    i want to display this i_final table in alv. for that i genetrate one fieldcatalog
    PERFORM fcat USING:
                      'I_FINAL' 'PERNR' 'P0000' 'PERNR' '15' 'X' '',
                      'I_FINAL' 'BEGDA' 'P0000' 'BEGDA' '10' 'X' '',
                      'I_FINAL' 'PLANS' 'ZPOSITION' 'PLANS' '8' 'X' '',
                      'I_FINAL' 'WERKS' 'PSPAR' 'WERKS' '14' 'X' ''.
    in custom table zposition, i maintain serch help for custom field "PLANS".
    then i used reuse_alv_grid_display.. for all the std fields along wit custom fields
    i got f4 all std fields but for my custom i am not getting the f4 help
    how can i get the F$ help for this custom fields Zposition-plans..
    plz give some idea

    Hi
    In that Ztable against the field
    PLANS give the check table name as  <b>T528B</b>
    then it will automatically give the search help
    or you can create your own search help(elementary) and add to that field
    Reward if useful
    regards
    Anji

  • Search Help for Custom field in Sourcing Cockpit

    Hi SRM Experts,
    I added custom field "rush order" in the Structures as per requirement. I added code in MODIFY_SCREEN function module. Search help is working for "rush order" in Process Purchase Orders (to search PO) and Check Status (Searching Shopping Cart). But it is not working in sourcing cockpit. Please guide or suggest me is there any additional settings or programming is required to have search help for custom fields in Sourcing Cockpit.
    Thanks a lot in advance.
    Thanks,
    Koyya

    Hi SRM Experts,
    Please let me know any suggestion on this issue.
    Thanks a lot in advance.
    Thanks,
    Koyya

  • Icon for customer field (field group)

    Hello!
    We have a need to follow-up one indicator through a customer field thanks to icon (like severities).
    Do you know if it's possible to manage that with the field groups for customer field (I couldn't achieve that yet), or if we have to develop a dedicated webdynpro application for that?
    Thanks!
    Matthias

    Hi
    You need to use programs provided by SAP  to handle dynamic behaviour.
    The idea is to store your BDC data into a file. (If you are already reading
    from a file, you still may have to write to a file suitable for the
    program).
    The SAP standad program can be called using a SUBMIT.
    Here are two programs that you can try :
    For creation of Customers : RFBIDE00
    For creation of Vendors : RFBIKR00.
    Regards
    Neha

  • Change Log for Custom fields

    Hi All,
    I need the change log for custom fields added in BP transaction codes.
    Basically, for tracking the changes of master data in CDHDR and CDPOS tables we will enable the checkbox of dataelement related to custom field.
    As for SAP fields in BP transaction code the change history is reflecting in CDHDR/CDPOS tables. i have enabled that for custom fields added to BP transaction code but i could not see the change history for such fields.
    Please let us know if iam missing any other thing?

    Hi Amit Singh,
    Apart from clicking the checkbox in dataelement...
    There are some settings need to be done by BASIS
    and some settings and entries should be made in SCOD t-code
    create entriy for change document here..
    also hv a look on below links...
    http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/fa015b493111d182b70000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp2004/helpdata/en/db/7a2a40ce93185de10000000a1550b0/content.htm
    Custom Table values in CDPOS and CDHDR
    scdo
    wat do these fields in scdo stand for?
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7

  • Strategy for Custom Fields

    Hi Everyone,
    I've a question related to handling of custom fields during upgrade.
    Scenario:
    9.0 delivered record has a custom field added to it.
    After initial pass, following happened.
    1. 9.0 delivered record was replaced by 9.2 delivered record structure
    2. Custom Field was deleted
    3. Data for the custom field was dropped too..
    Q1 What should be the best strategy to get the data and field back... Here is what I understand.
    Keep 9.2 record
    Add custom field to it.
    Import data for custom field from another 9.0 environment.
    Suggestions welcome.

    during initial move don't drop the custom added fields which are needed.
    This way you will not lose the data

  • Changed document for custom fields

    Hi All,
    For business transactions we can see <b>changed documents</b> under <b>Extras</b> menu.
    I have custom tabs & custom fields in business transaction. We need to see the custom field changes by value & user in the above menu. Is it possible? how?
    thanks,
    Bhushan

    Hi Murlidhar,
    My question is related to SAP CRM. The notes you suggested are not for CRM.
    Others, do you have any idea how to add/show records in "Extras-> Change Documents" of business transactions like Sales order, activities for custom fields not using EEWB.
    thanks,
    Bhushan

  • Is there any plan to release an express edition for ORACLE 11g?

    Hi
    I am wondering whether ORACLE has some plan to release an express edition for its ORACLE 11g?
    Thanks.

    info about [11g Express|http://www.pcworld.com/businesscenter/article/173509/oracle_11g_xpress_edition_a_year_or_two_away.html]

  • Negative values for Custom field in SAP coding block !

    Hi All,
    Hope all of you are doing fine.
    I need your valuable suggestion/possible workaround for the following requirement.
    u2022 The project requires me to add a custom new field to SAP coding block, which can take negative numeric values.
    u2022 The standard u201Caddition of custom fieldu201D configuration allows me to have the data type of the newly added custom field as either NUMC or CHAR. NUMC data type does not allow negative values. Standard configuration does not allow me to choose other data types (for custom field addition) like QUAN which can allow negative values (by checking the Sign at domain level in data type).
    u2022 Moreover, once I have added the custom field, itu2019s not possible to change the data type of the newly added field (say from NUMC to QUAN).
    I wanted to know if anyone of you have any project experience/knowledge about possible workaround, where we can add a custom field in SAP coding block, which can accept negative numeric values (through standard configuration or otherwise).

    No experience on that, but I strongly advise you to not trying to do something else than what was designed by SAP. So, you can create a character type field, with for example a field exit (though this technology is obsolete, it's very useful in that case) to validate its content (and reformat it if needed).
    Note that from a functional perspective, I think an amount is strange in the coding block, so maybe ask the functional people to know why they need it...

  • Transfer OTL to Payroll is not working for Custom Field Values

    Hi,
    We have Extended the Payroll and Project layout in OTL to include custom fields.
    Now linked the fields to Element entries input values.
    The issue happens when a retro batch is processed and transfered to Payroll the input values are not getting pulled properly.
    i.e. The retro batch creates a positive value for the new retro entry and a Counter negative value for the old record.
    Only in the case of Negative value, the issue is happening. For the positive value it is pulling the record properly from the custom fields.
    Can you please let me know, how to debug the same.
    Also this issue happens randomly not all the employees are facing this issue.
    Thanks,
    Raja Rajan

    Hi Rsn,
    just check the put this code in
    1st way--
    jjust import the api in your custom Action class
    import com.sap.isa.core.logging.IsaLocation;
    private final static IsaLocation log = IsaLocation.getInstance(ZcustomeAction.class.getName());
    then
    log.error("value"+value);
    in this  way you can debug the code...if not possible thenn...
    you can write...
    System.err.println("value"+value);
    you can also try to this  way..i think it will work now
    Thanks
    Jati

  • F4 help for custom field

    Hi Experts,
    we have created custom field in SAles order and try to maintain a F4 help for that.
    we have created Search help with search help exit,when we click on F4 help the values are getting populated currectly in the pop-up in UI.  issue is when we select value from the multiple values the value is not getting replicated in the custom field.
    can you please let me know what the issue will be.
    Thanks in advance.
    Regards,
    Anil

    Hi Sheshagiri,
    Thanks for the reply.
    but the issue i think is not with the search help.
    search help we have created and the values are retrived correctly.
    when we select a value from the populated values the values is not been replicated in the specific field.
    please help me on this.
    Regards,
    Anil

  • "F4" search-help for custom field in PCUI

    Hello all,
    Does anyone know how I can create my own simple F4-help for a custom field I have added to a custom Tab Page in the PCUI? It should show a selection from a custom table.
    I couldn't find an useable example in the PCUI-cookbook.
    Any ideas anyone?
    Kind regards,
    Martijn de Jong.

    Hi Manuel,
    I saw that paragraph but didn't know how to implement it. Maybe you or someone else can explain/translate in steps what I have to do, according to the text underneath, i want to use a combobox:
    "If you want the application to specify the values for selection (within popup or dropdown list box or
    combobox (COBX respectively TIME)) at runtime instead of using predefined domain values, data
    must be provided by the application via the method FILL_DROPDOWN_LISTBOX. That scenario
    works if the field type is "Input Field" and the F4 application is set to "VALUE_TABLE". With these
    customizing settings, the method FILL_DROPDOWN_LISTBOX of the interaction layer is called at
    runtime and the actual field values will be passed to the application via importing parameter
    IT_SCREEN_STRUCTURE. Thus the application can provide context-sensitive help values within a
    popup or a dropdown list box respectively combobox (COBX respectively TIME). Within the popup
    more than one column of values can be displayed."
    How/where do I (re)define method FILL_DROPDOWN_LISTBOX? Do i have to maintain an own class? and how do i ensure that more columns are shown?
    Kind regards,
    Martijn de Jong.

  • Add additional tab on item level in contract for customer fields

    Hi Guys,
    Does anyone know if the following is possible in SRM 7.0, and if so can you please give a very short description how to accomplish this -
    In addition to the standard tabs available in the contract (general data, notes, conditions etc.), is it possible to add a new customer specific tab on item level, in a central contract and add some customer fields to this tab?
    I know it is possible to add customer fields in SRM, but I am curious if I can create a new tab for these fields, so that I can group all customer fields together in one place.
    Thx.
    Kind Regards,
    Skander

    Yes. it is possible but you have to take care of in the back end too and how these fields comes and sit in ECC. so that you may need to map in the IDOC or XI data . so that these information must be pssed to ECC and available  and accordingly you need to change in purchase order too since all these data will be copied into purchase order too.
    for example :- if you add one field in header level /item level of contract
    and it must be coppied into Backend contract as well as your next consecutive docuemnt like Purchase order must be taken care. hope you understand now.
    Muthu

  • How to get field description for custom field just like orgeh in SQ01 Repor

    Good Day Friends,
    I want to share one of my issue with you.Hope you will resolve it easily .
    I have enhaced standard infotype 0001 to maintain JOB CODE field, i also have maintained the
    JOB CODE, JOB CODE DESCRIPTION in one custom table  ( ZHR_JOBDISC ) .
    I have given farigen key relation between this custom table ( ZHR_JOBDISC ) and PA0001. i also have created one search help and assigned to the Field JOB CODE.
    But when i am trying to write the query in SQ01 . i am unable to fetch description.
    if you observe the standard fields position (PLANS), Organisational Unit (ORGEH).while writing query if you right click on PLANS will show the description of position, similarly  if you right click on ORGEH it will show the description org unit.
    but i am unable to get the description of my custom field.
    Please give clarification where i am doing wrong ?

    Good day Ravindra,
    Please, could you consider as reference notes 367585, 332842 and 491403.
    This is well described in the documentation for the interface of IF_TEXT_IDENTIFIER.
    Transaction SE24, enter IF_TEXT_IDENTIFIER, Display' function and check
    the 'Interface documentation'. Please choose "HR Class" upon executing for Text Recognition.
    Additionally check the following website:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/d9/9958e0c50a11d396f80000
    e82de14a/frameset.htm
    Hope this information helps.
    Kind regards,
    Graziela

Maybe you are looking for