Release a worklist thru t-code AR31

Hi
When I am trying to release a worklist thru t-code AR31. I am getting "No Administrator found for the task" message.
I follow below mentioned procedure.
1. AR01 -> Give your company code -> and the asset numbers
Now press F8 to execute the same.
2. At this point -> Go to the worklist(Top Right Side of the screen WL) -> create -> Enter in the mandatory tab and select the retirement without revenue -> Enter
3. Enter dates / transaction type -> now you will get a work queue number
4. Go to AR31 and execute the work queue -> Then click the Release button
Pls. suggest me how to resolve this problem.
Thanks
Ranjith

Minimal configuration of workflow must be enabled -- check with our basis team.

Similar Messages

How to read a mail from sap inbox thru abap code?

how to read a mail from sap INBOX thru abap code? can anyone tell me the technical approach? I NEED TO READ A MAIL and then need to pass the parameters to a bapi.
Message was edited by:
shahid mohammed syed

Hi SSM,
Did you manage to have your program working? I also have same requirement. I tried standard FM and BAPI but I always encounter authorization error when I tried accessing other user's mail. Thanks.
Regards,
Ryan

SCCM 2012 R2 - Migration TS Failed in Release Request Step with Error Code 0x80004005

Hi
I have Upgraded my lab from SCCM 2012 SP1 to SCCM 2012 R2. Now, While I am running TS for Refresh/Replace Migration, its successfully captures all the Data & settings and can also restores all Data & settings, but at release request Step TS got failed.
In SMSTS log file error was "Release Request Failed with error code 0x80004005".
Is there any KB released by Microsoft to fix this issue?? Due to this issue I am unable to run any other TS.

I've seen a few weird scenarios with task sequences after an upgrade from SP1 to R2.
In most cases I've been able to fix these "problems" by simply creating a new task sequence, and copy all the custom steps to the new task sequence.
Also make sure to update boot images, mdt packages, usmt etc. to new versions.
So thats what I'd try first....
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

PO Release Strategy for 3 company codes

Hi
I am working on PO release procedure for 3 company codes in a client.I have created a one charecteristics called Order Type & assigned to class -POVALUE_NEW .I am using the same charecteristics & class in 3 company codes. I have created a different Rel Group & release Codes & assign as shown below
Group                       Class
AA     2     POVALUE_NEW
AB     2     POVALUE_NEW
F1     2     POVALUE_NEW
F2     2     POVALUE_NEW
V1     2     POVALUE_NEW
V2     2     POVALUE_NEW
Group     Rel Code
AA     L1
AA     L2
AB     L1
AB     L2
F1     F1
F2     F2
V1     A1
V1     A2
V2     A1
V2     A2
Created a Rel strategy as below
Group       Strategy
AA     P1------Vendor PO
AB     P2-------STO PO
F1     F1------Vendor PO
F2     F2-------STO PO
V1     V1------Vendor PO
V2     V2-------STO PO
I have maintained all the Doc type in value coloum of the cherecteristics .For vendor PO combination of Group & strategy , I have selected the respective Doc types in clasification .*When I raise the PO I am not getting the Release Strategy Tab in PO header* & when I remove the value in clasification any strategy , I will get the Rel Strategy Tab but this will appear in all company code POs .I want to give different lease codes for each company codes I am unable to find a solution to this issue . I am looking for a valuable suggesion from you all .
Thanks
Venkat

Hi,
1.in addition to existing Characteristic, create one more characteristic for Co. Code. Table CEKKO Field: BUKRS
2. Assign this new char. to your PO Release Class
3. Define your Release Codes for each Co. Code.
4. Define Strategies with characteristic values Co. code and Doc. Type.with co. code relevantRelease codes.
Ex: Co. Code1   Rel Grp-1 G1; Codes: A1, A2, A3
      Co. Code2   Rel Grp-2 G2; Codes: B1, B2, B3
      Co. Code3   Rel Grp-3 G3; Codes: C1, C2, C3
Strategy-1:
              G1   S1     A1 A2 A3;   values: CCd-1, Doc. type1
Strategy-2:
              G1   S2     A1 A2    ;   values: CCd-1, Doc. type2
Strategy-3:
              G1   S3     B1 B2 B3;   values: CCd-2, Doc. type1/Doc Type2
Strategy-4:
              G1   S4     B1 B2 ;   values: CCd-2, Doc. type2/Doc Type3
Like this you can make as many strategies to meet your requirement.

Can we transport the already released TR by scc1 transaction code???

can we transport the already released TR by scc1 transaction code???

Hi Darshan,
All released TR's can only be transported to other environments (QA,Prod) by using transaction
'SE09'.
'SCC1' is used only to copy TR's from one client to other client within the same environment.
For example,
I have a Transport request in 100 client, now I need to move these changes to 110 client.
Through 'SCC1' no need to release the request, directly you can login to 110 client, and give the source client client where your Transport Request exists and the TR number and check the check box -> Including Request Subtasks.
Thanks,
Vijay V

Create CRM customer/account hierarchy node thru abap code

Hi,
Any one can help me on how to Create CRM customer/account hierarchy node thru abap code?
Is there any Class/methods, FMs that I can use to create node in customer/account hierarchy?
Sample codes will greatly help me.
I hope someone can help me on this since this is my urgent requirements on my project.
Thanks,
james

James,
You can find the FM, Class Lib and APIs under the package BUPA_HIERARCHY.

Error while saving INtial stock upload thru t-code MB1C

I am getting an error while saving the entered material quantity for initial stock overload thru MB1C
the error is "FOr object RF_BELEG GB10, number range interval 49 doesn't exist FBN1..
I am from SD module. Please help me resolve this issue.
THank you
Brian

Dear Brian
When you are carrying out the MB1C Txn, system document for account ing for the current is not existing, so you are getting this error.
Use FBN1 you will bet the screen Number Ranges for accounting Documents enter Your company code here "XXXX" then click the Intervals push button, you will go to the screen maintain number range Intervals , Check for 49 serial number whether you are having a number range for the current period if not then use the Insert Interval + button and enter 49 ,Year and the from & to number ranges. You can repeat the last years no. range in the current year also.
Best Regards
SAM
Edited by: samuel mendis on Apr 8, 2009 6:26 AM

Error release purchase order using transaction code me29n

i have warning error this purchasing document number cannot be released.
while i enter me29n t code.why?
then how to release purchase order using me29n t code?
can anyone answer this two questions.

hi
i have warning error this purchasing document number cannot be released. while i enter me29n t code.why?
is the release strategy is triggred for the po ?? check thisin P order in me23n ,in header level check release strategy tab ,
then how to release purchase order using me29n t code? can anyone answer this two questions.
just go to me29n >release strategy tab here just click on the release button in front of the release code

QE573 and QE570 error messages always getting printed while releasing orders from COR5 T-Code.

Hi Experts,
User is getting QE573 and QE570 printed messages while releasing every process order from COR5 T-Code.
I tried to investigate this and found that these are printing messages for "Sample Drawing Instruction" and "Inspection instruction", and there is a print setting in CB85 because of which these message are printed.
But need to know if there is any additional setting related to Production Planning/Order Types/Plants because of which these printed messages are appearing in COR5 T-Code.
If yes, then please mention the settings and possible how to resolve this so that the users don't get this while releasing any order.
Thanks
Adarsh

Hi Ajay,
In KEPC with the combination of sales organisation &, billing type costing key is assigned for the valuation class 7010 (Finished goods) But costing key is not assigned to valuation class 3000 (raw material). and I saw the same setting in quality. Still we are able to create the acounting document. But in case of production it is asking for cost estimate with the costing keys for the valuation class 7010.. Is any other setting which is missing in Quality as we are able to create accounting documents though the costing key is defined for the valuation class 7010.
Can you please advise?
Thanks & Regards
Veda

PO releasing on Change of Tax code in invoice tab

Hi Gurus
When Ever I changes Quantity of Already Released PO From ME22n its again Asking to Release it From ME29N.
I want to do same Scenario if i change Tax Code of that PO , it should again Ask for Release .
Is it Possible to do by Configuration , Enhancement?
Thanks
Prathamesh

hi
>i wanna see the list of the tax code defined for the Service PO in its "invoice" tab.like for service tax we have three tax :
check T code FTXP
> tax code displayed to which the calculations are applied
check t code OBYZ
regards
kunal

App release: Pollinator HD with promo codes

Hey all,
My first app of substance, Pollinator HD, has been released for iPad. I have also been developing it for iPhone/iPod Touch as well, but am currently deciding what to do about retina display, so am releasing the iPad version first.
It is a path drawing game similar to Flight Control, except with bees. The game was developed in AIR 2.6 for those who are interested.
Website: http://www.pollinator-game.com/
iTunes link: http://itunes.apple.com/us/app/pollinator-hd/id483306050?mt=8
Promo codes (anyone is free to use them, first in best-dressed obviously):
9XTNEYJJAA3F
KERLK93NMXPP
3JXFTAAAHHFY
7AFNTYXJYAPE
PKNAM6E44LRF
Thanks to everyone on here who has helped me.

Hi,
Some users reported exactly the same problem with my app
Week View.
Seems that this problem occurs when users bought an app when it was free (as part of a promotion) and the price of the app was set to it's normal value at the end of the promotion.
This problem exists for more the 1/2 year now.
Can someone from MS finally fix this?!
Users reported me that MS support told them to contact the developer.
Can someone from MS support please comment this.
How should a developer fix a marketplace issue?
Should I set the price of my app to "free" temporary to fix this or will it make the problem even worse since more users will install the app for free and have a problem after I change it back to the normal price again?
@ChrisKa: How did you "fix" this problem?
best regards,
Hannes

How to provide value to a User Defined field thru java code

I am using OIM 11.1.1.5.
I have a user defined field called Unique-Customer-Number. This field need to be pre-populated during user creation (using OIM Web UI) and the value comes from a java code.
Can any of you tell me the high level steps to implement this.
Thanks!
Kabi

Thanks Rajiv,
I just followed everything on metalink 1262803.1. My console shows the followings during Metadata import.
weblogicImportMetadata.bat :-
Starting import metadata script ....
Please enter your username :weblogic
Please enter your password :
Please enter your server URL [t3://localhost:7001] :t3://10.10.99.99:7001
Connecting to t3://10.10.99.99:7001 with userid weblogic ...
Successfully connected to Admin Server 'adm_server01' that belongs to domain 'server01'.
Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead.
Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.For more help, use help(domainRuntime)
Disconnected from weblogic server: adm_eimsdv1s01
End of importing metadata script ...
Exiting WebLogic Scripting Tool.
How I will I know that my plugin/ event-Handler is registered successfully. Is there any screen where I can see all registered plugins ?

How to step thru the code in jar file.

I am trying to step through the code in the jar file. My code is a Java stored procedure which uses a jar file. Whenever I try to Trace into the code residing in the jar file I am always hitting the
JDeveloper API Decompiler STUB SOURCE generated from class file.
I tried to set up the Class path and Source path in the Project Options but it didn't help.
Any help is appreciated.
Thanks.

If are trying to debug the Java Stored Procedure deployed in Oracle8i (816), then you should be using Remote Debugging feature in JDeveloper 3.1
check out http://technet.oracle.com/products/jdev/info/jdev/rdjsproc/s000.html http://technetinside.us.oracle.com/products/jdev/info/rdebugwp/rdebugwp.html
raghu

Problem While calling Planning Modeler thru T Code RSPLAN

Hi All,
     When I am starting the planning modeler and after entering the log on details on SAP Netweaver, the web is showing blank tabs of Info Provider/Aggregation level/etc.. Only blank tabs are appearing without any data.
       I have gone thru the SAP Note 919850 (Problems with Planning Modeler..) but it didn't help. Also let me know that is their any connection of plannning modeler with the BI Web Template Maintenance??
    Thanks in advance.
Amit Verma

Hi Amit,
You need the following authorizations to work on planning modeler.
Authorization objects for business planning:
S_RS_ALVL: Authorizations for working with aggregation levels
S_RS_PLSE: Authorizations for working with planning functions
S_RS_PLSQ: Authorizations for working with planning sequences
S_RS_PLST: Authorizations for working with planning function types
S_RS_PLENQ: Authorizations for maintaining or displaying lock settings
Also you need to be on SPS12 for the input ready queries to work effectively.
Some times there could be an issue with the JCo connectivity between the Webdynpro and the BI system.The user assigned to the JCo destination for BI metadata in webdynpro does not have enough authorization in the BI system.
The above authorizations would sort and also check with your Basis team about the JCO.
Refer this too
/thread/227167 [original link is broken]
Hope this helps and assign points if it does.
Raja

Delete Asset trans thru' t-code OABL

Hi,
We have deleted the data in asset module in our development client using the t-code OABL, before that we have 'reset company code' in asset module.
After the successful deletion I noticed that there are still some entries in ANLC table and the std report S_ALR_87011964 also display the entries, please let me know whether any other step is to be carried out as it is not deleting the entire data ie.master and transactions.
Thanks,
SS

Hi,
I'm sorry this case has to be checked on your system from a consulter. I don't have enough information and this is a really complicated topic.
Here I can give you only general information
See information on transactions OABL and OAGL :
Asset Accounting > Preparing for Production Startup > Tools
u201Cu2026
Keep in mind that Asset Accounting data is deleted in this processing
step, but integrated applications (for example, Financial Accounting)
are not affected. Therefore you should only carry out this step in
conjunction with the other applications.
..u201D
In case of a productive system and where a company code has already been in productive status then you cannot reset the company code under any circumstances!
regards Bernhard

Release a worklist thru t-code AR31

Similar Messages

Maybe you are looking for