Release change request. It remains in pending

Hi all,
when I try to release directly a change request from my development system it started but it remains in pending with the following message "tp successfully connected". In the process of the operating system (W2000) it is present but it does not work.
If I stop the transaction after long time, the process is still present in the list of active process.
This is my SAP release:
SAP R3 Enterprise 470x200 on Windows 2000 server - DB Oracle 9.2.0.6.0
Kernel 640 not unicode patch level 101
Could you please help me??
Thanks in advanced
Moreno

have a look into directory
\usr\sap\trans\tmp
and additionaly to the latest
\usr\sap\trans\log\SLOG*
file.
specially the 2nd file should normaly tell you more.
regards
Peter

Similar Messages

Released Change Requests have changed status to modifiable

Hi all,
something very rare happend some days ago in my development R/3 client. Every released change request appear as modifiable, i mean, all the change requests that have been released before a specific day (eg. 14 Setiembre) now appear as modifiable.
The tasks that these change requests contain maintain the correct status (released) but the father change request appear as modifiable.
SAP says something about avoiding import requests(scc1) when other requests are been released. I didn't got it.
Now we need a secure way to correct the status of these requests. Can you help me please.
REgards,
Christian

From my scant knowledge I would recommend reading about SE03 to verify system settings (not modifiable, etc.) and be looking at SCC4 for checking the changeable status for applicable client. You should be checking STMS and its documentation very carefully.<a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm">Transport Management System</a>
I am sure other Gurus can help, but I remember reading documentation for these transactions as well as SE95 (Modification Assistant).
Please post these kind of questions in the appropriate forum, by the way.
Thanks,
Marilyn

Release Change Request

Hi,
I have two Question..
1. What is the difference between Task and Change Request.
2. Is it possible to release change request without releasing task
Thanks in Advance..
Regards
Rai..

change is request is like a container which consists of all tasks
suppose if you have one task such as creating program or creating structure
or any changes to programs or to structures like that..
when u want to release the request firls u have to release all the tasks in that request then only it will be relesed with out errors
first u should pack all the tasks in request and then only u have to rrelease the request..
Hope i am clear to u..
for any further quiries u can contact me for details see my business card...

How you ll release change requests in your module

hi ,
i am new to sap ,and i have two questions
1) how you ll release change requests in your module how often u releases them ?
2) what is the difference between task and change request ?

Hi,
Go through the following link to understand the Transport organizer also the difference between change request and task
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c7/313b37a9fb2663e10000009b38f936/frameset.htm
Regards,
SC

STMS change request release problem

Hi
I am not able to release change requests, sab task able to release, but problem in main request, when I press , release directly, on the bottom it shows u2026tp successfully connected / check writeability of buffers finished with return cod 0. Then screen hangs u2026 manually I have to stop the transition.
I have configured STMS 4,5 times but same problem, in SM59 all retaliated RFCs working fine.
Our System is ERP 6.0, HPUX with DB2
Kindly give me a solution.
But in Tcode STMS >>Monitor>>TMS Alerts>>TMS Alert viewer showers following error:
Date       Time       User           Function      Message                                            System   Clt
23.05.10   17:29:07   TMSADM         TMS_TS_GET_TRLIST    NO_LOG                SID      000
23.05.10   16:58:25   TMSADM         TMS_PS_READ_PROFILE_FROM_DISK                               READ_PROFILE_FAILED                                            SID      000
23.05.10   16:57:30   TMSADM         TMS_PS_READ_PROFILE_FROM_DISK                                 READ_PROFILE_FAILED                                            SID      000
23.05.10   15:55:59   TMSADM         TMS_TP_MAINTAIN_BUFFER                                        RFC_SYSTEM_FAILURE                                             SID      200
23.05.10   15:05:36   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID     000
23.05.10   15:01:29   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID     000
23.05.10   14:53:00   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID    000
23.05.10   14:51:38   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID      000
Regards
Sunny

Hi Sunny,
Its hard to tell what might be the problem.
I would recommend that you:
- update kernel to the latest patch level for your release
- update your transport tools, tp and R3trans to the latest available for your release
- go into STMS - system pverview and do the 3 checks: Connection test, transport directory, transport tool
check if they all pass.
- try to release a transport and then if it still freezes after all of the above, stop it and check the system log, trans.log, the latest logs in usr/sap/trans/tmp and usr/sap/trans/log to see what was the action it was doing before it froze. That will give a clue as to where the issue may be.
regards,
Paul

How to import a Change request from One application to another application.

Hi,
In SRM Dev system I have created a Change request (Transport Request) and released to the QA system.The Change request has imported successfully to the SRM QA system.
Now the Case is:
The Released Request in the SRM Dev system has to be Export to the CRM Dev system.
Is it possible to Export the Released Change Request from SRM system to CRM system?
If possible then can you provide me with the solution.
Thanks in Advance
Dharma

Hi,
Your system admin knows how to do it. System admin should define transport route. Please check it in transaction STMS.
Regards,
Masa

Change Request Flow In a Three System Landscape --- PLZ DO REPLY

Hi Experts,
I am new to SAP and have this doubt;
Suppose we have a three system landscape with DEV, QTY and PRD systems in it.
Say we create a new change request in DEV system. So to transport it to QTY we will release that request from DEV using T code se01 .
Now the request will come in QTY systems queue and we will login to the appropriate QTY client and import this request into the QTY system.
<b>No my basic doubt is, after the testing in QTY how do we move this request to PRD system ?</b>
Do we again release this request from QTY system using se01 or we need to go at the OS level in the QTY system and manually add this change request in the PRD system buffer ? ( Please send if any reference link is there)
I will really appreciate any info in this regard.
Thanks in advance.
Regards,
Mandeep

Hai Mandeep,
    First Thing,
    -->If you are maintaining a common transport directory,the released change
       request will be exported in that common transport directory..
    --->Now you just enter in to the server(which is Transport Domain
        Controller).
    --->In that go to Import Overview,now your QA server has one import req.
        you just click the req. and import that req..
>Now if you want to import the same req int o PRD.,Enter in to PRD
         server.Go to tcode STMS_IMPORT, In the top go to
           Extras>Other req.>add..click this and add that particular
         req.that you want to import in to PRD server..
    --->select that req and import that req...
Thanks & Regards,
Gopinathan.T

Change Requests have changed status

Hi all,
something very rare happend some days ago in my development R/3 client. Every released change request appear as modifiable, i mean, all the change requests that have been released before a specific day (eg. 14 Setiembre) now appear as modifiable.
The tasks that these change requests contain maintain the correct status (released) but the father change request appear as modifiable.
SAP says something about avoiding import requests(scc1) when other requests are been released. I didn't got it.
Now we need a secure way to correct the status of these requests. Can you help me please.
REgards,
Christian

From my scant knowledge I would recommend reading about SE03 to verify system settings (not modifiable, etc.) and be looking at SCC4 for checking the changeable status for applicable client. You should be checking STMS and its documentation very carefully.<a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm">Transport Management System</a>
I am sure other Gurus can help, but I remember reading documentation for these transactions as well as SE95 (Modification Assistant).
Please post these kind of questions in the appropriate forum, by the way.
Thanks,
Marilyn

Transports and Change Request

Hi Gurus-
Can some one tell me a simple scenario including following terms. I needed this as I am unable to picture everything together when I read documentation about these.
1. Transports
2. Change Request
3. Task
4. Package (Transportable)
5. Creating a Change Request (who will do this normally, as a developer how do I get this)
6. Releasing Change Request
7. Collecting Objects
Plese take a simple scenario like adding KF to a infoCube or changing a report.
Thanks in advace, points will be awarded.
Message was edited by:
PUNZU

Please see my comments below.
1. Transports
Generally used to transport changes from development to QA to Production. Direct changes in Production is not advisable. Hence we make use of this tool.
2. Change Request
A change request/transport request stores all the objects you are changing and assigning them to this request. Any further changes to these objects will automatically be captured in this request.
3. Task
Generally, when a second user changes the same object which is captured in a request, a task is created under that request. However, when you release request, the final change gets transported. You need to release task before releasing a request.
4. Package (Transportable)
You define a group of objects as package just for identification purpose. For example, for workbench objects like cubes, I/O, ODS, you define workbench package. Whenever you are using transport connection from rsa1, and capture the objects in a request, you must assign each and every object to a particular package. There is no hard and fast rule of define packages. It is just for identification purpose.
5. Creating a Change Request (who will do this normally, as a developer how do I get this)
Generally, you as a developer should do this. Whenever you are making some change to an object and activating it, it will ask for a transport request. Otherwise, you can also drag and drop individual objects and select them and transport using transport connection tab in RSA1.
You can see the transport requests that you have created in transaction se09 or se10.
6. Releasing Change Request
Right click the request in se10 and click release.
7. Collecting Objects
You need to collect in target server. Generally, in most of the places, this process is automized with a workflow. you don't need to take care of this.
Hope this helps(something different from the things available in documentation).
Regards,
anup

Unable to release the change request from se01

HI All,
Recently i had applied Rsecnotes as per sap recommendation in EWA Report and I implemented successfully in DEV System. But, When i try to release the change requests from SE01 in (DEV System)
it is giving the error message "Object Func<objectname> is inactive". I have unlocked all the request and checked but still problem exsist.
Please help me to release the request and implement in the landscape.
Thanks,
Rajesh N

Hi,
Activate the object using se03 and then relaese the request
thanks

Change the description of the change request number" in SE10 after release

Hi All
Is there way to change the
"description of the change request number" in SE10
after releasing the change request number?
appreciate your feedback
Thanks you
Iver

Hello
I do not know a way to do it in se10 but a simple program could do the trick.
Include the following code in your program.
update e07t set as4text = 'your new description'
where trkorr = your_cr and langu = 'E'.
Of course you will have to wrestle with the 'moral issue' of directly updating SAP delivered tables
Regards
Greg Kern.

How to release the Change request (Task in Repair Mode)

Hello everybody,
I have change request in that one Task in Repair mode.
when i trying to release, it give the error message like
Repair HRDK900911 may only contain repaired objects
Diagnosis
In repairs, you can only lock and edit those objects whose original exists in another SAP System.
The object R3TR PROG /VWK/GPS_VCD_R was found in the object list of your repair HRDK900911. This object is not a copy but the original.
So please suggest me
How to release the Task (Repair) so I can release the request.
Thanks

Yes you wont be able to release the request till you remove the flag from SE03.
Goto SE03 > Display Repaired Objects
Select Your object and remove the repair flag from top <Repair Flag>
R3TR PROG <Your Object>
Also as you are getting an error
No valid change license available for namespace
In SE03-->Display/change Namespace
when I check the specified Namespace then their is no Repair License.
So please suggest me Repair License is required?
check what namespace it is refrerring to ... A namespace name should be there....
1. Go to SE06 and click on the System Change Option.
2. Verify that Namespace Systems Development /Namespace/ is "Modifiable".
or
1. Run transaction SM30
2. Enter V_TRNSPACE
2. Click Maintain
3. Double Click on Namespace /NAMESPACE/
4. Change Namespace role from P to C, then hit Save
All the best !
Edited by: prateek_y on Aug 30, 2010 3:21 PM

Change request released & but not visible

Hi kaushal & all,
Customizing change request is released from development system & data file & co-files are not generated which inturn i can't manage to
see the request in queue.Also log is not visible for the released request.

Hi,
Customizing change request is released from development system & data file & co-files are not generated
For the above reason only two possibilities if STMS configuration is proper.
- Request is local request
- No target system is define in released request.
in your development system run se01 -> in display tab enter request -> press enter.
double click on request -> select properties tab -> make sure target system indicate your QAS system.
regards,
kaushal

Released the Transport Request which is in Local Change Request

Hi,
Actually without knowing I have released transport requests which are under Local Change Request.Due to this they are not available for importing in Quality system.My Package is also there in one of those Requests.Now please guide me how to recover these requests.
Regards
Karthik

Hello Karthik
The easiest way should be to copy the object list of your local request to a new (transportable) workbench request.
However, the system might tell you that your objects can only be put into a local request.
In this case you need to find out why your objects are not (yet) transportable.
Usually there are two reasons for local request:
1.) The request does not have a target system -> check the request header and enter the correct target system (if possible)
2.) Your package has an inappropriate transport layer assigned -> change the transport layer
Regards
Uwe

Ifference between change request and release request and transport request

what is the difference between change request and release request and transport request and customization request?

Please refer to this link :
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Regards,
Praveen
Pl reward if helpful

Release change request. It remains in pending

Similar Messages

Maybe you are looking for