Release codes Indicators in Release procedure

Hi sap gurus
In my release procedure Configuration, we have 4 release codes
01 engineer
02 Manager
03 DGM
04 GM
the release indicators must be configured such that if any value changes or qnty changes is done by 04 GM code it must be re-released by 03 DGM only,
and it should go back to codes 01 and 02 for approval again,
i used 4 and 6 indicators for codes   04 and 06 but could not find any difference nor my requirement was met
can any one pls tell me how to meet the requirement.
1     Cannot be changed
2     Changeable, no new determination of strategy
3     Changeable, new release in case of new strategy
4     Changeable, new release in case of new strat. or val. change
5     Changeable, new release if new strategy/outputted
6     Changeable, new rel. if new strat. or value change/outputted
     Changeable, new release in case of new strategy
also what is the change in codes 3,4, 5 and 6 .
Thanks and Regards
Sathish

Goto This thread http://www.sap123.com/showthread.php?t=59
it will explain you averything

Similar Messages

Two release code in one release strategy

Dear all,
Good Day!
how can i create two release code in one release strategy on Purchase Order
Release code is 07 - P & L Manager and 18 - President
07 will release up to 500,000.00
07 and 18 will release 500,000.00 and up
thanks in advence,
Ermin D. Concepcion

Hi Ermen,
I am not getting the problem, as Mr Barik has already suggested you the correct solution, if you want the path then the path is
IMG>Materials Management>Purchasing>Purchase Order>Release Procedure for Purchase Orders-->Define Release Procedure for Purchase Orders.
Here you must have already designed the Release codes, Release Indicator and release groups for your strategy, you have to define the "Release Strategies".
Select the group and the strategy and put in the Release codes. and proceed.
Here in the classification TAB please give the values, if this release strategy is to be triggered for less then 500000 NETW field.
and same way define another Release strategy with The NETW value greater then or Equal to 50000.01
I guess you were asking the same thing.
Regards,
Yawar Khan

How to have more than 8 release code for a release strategy

Hi,
In standard only 8 level of release is possible for a release strategy. Our client requires more than 8 levels i.e., more than 8 release codes for a release strategy. How can we achieve this?
Pls provide your views/ideas.
Reards,

Hello,
In case you require more than 8 levels in release strategy , write to SAP, maybe they could give a fitting reply.
By the way , 8 levels of release should be more than enough . Try to incorporate the client business process
within this.
Regards
Anis

Release code - Purchase requisition - Release Procedure

Hello,
In the purchase requisition release procedure with classification, we are defining release codes say K, P etc.
My doubt is , Is this being defined else where based upon the designatin of the person in the organisation, or else, we are defining here straight away?
Best regards,
K.Kumaran.

HI
You are correct, you need to define the release code there only. There is no other place where it is defined. What you have to ensure is make sure that it is of Two character and not single. Assign the codes against the designation of the person as per your requirement.
Regards

Reuse Release Codes for PR Release.

Hi!
Business requirement has resulted in exhausting the Release Codes for Purchase Requisitions. What might possibly be the impact of using the same Release Codes in different Plants and restricting the users by Roles.
Example:
Release Strategy X: Plant IND1 / Value >0: Release Code ZZ
Release Strategy Y: Plant IND2 / Value >0: Release Code ZZ
Assume that the PR Releasers are different (say Mr. A & Mr. B for Plant IND1 and IND2 respectively):
Create 2 Role:
Role X: Authorization for Plant IND1 and Release Code ZZ
Role Y: Authorization for Plant IND2 and Release Code ZZ
Now if we assign Role X to Mr. A and Role Y to Mr. B, Mr. A will get only PRs from Plant IND1 and Mr. B will get only PRs from Plant IND2. Hence they can use the same Release Code ZZ. But the PRs will be from their respective Plants.
Can you foresee any issues with the above setup? I tested the same in sandbox and it is working fine.
Suggestions welcome.
Regards,
Riju

Dear Riju,
There has not a issue of Release Strategy, you can give the access rigth through role.
But check the muliples plant & Release code.
Regards,
PK.

RELEASE CODES IN SERVICE RELEASE STRATEGY

Dear All,
I have created a Service Group and assigned three release codes.But when I am trying to simulate the release in release strategy the release codes are not displayed.
Where have I gone wrong????.
Someone please help.
REgards

Did you maintain the combination of 'release group', 'release strategy' and 'release codes' under 'release strategies? You need to maintain this combination before simulating the release. Also, ensure after entering the said combination verifying 'relase preqreuisites, release statuses, assignment of class and then simulating the release.

ME21N - in which table saved the release status for specific release code ?

and for the specific po number.

Hi
You will find all Release codes in T16FS
Release procedures are used in condition tables to control whether the condition types for these condition tables have to be read during pricing condition determination or not.
If the condition table status is released then only the condition types will be read during pricing determination. If the status is not released, then they can be used for information purposes or for simulation of pricing.
The release status is controlled by processing status too, which can be seen in condition record creation screen.
So in crux, the processing status with Release status help in simulation of pricing, blockign the condition records from being read during pricing etc.
For more information an F1 help on the following path will give you some more information.
SPROSD-BF-PRICING-DEFINE PROCESSING STATUS----Here read the documentation meant for this link. You will get some more clarity on this.
Reward points
Regards

Function Module to fetch Release Code for PReqs

Hi,
Is there any function module to get the current release code applicale by passing the requisition number?
Example : If we have 4 levels of approval, say A1,A2,A3 and A4, and I want to know with what release code shall I release the requisition.
If release has benn effected for the requisition with codes A1 and A2 and if I query with the function module what is the current release code applicable, then it should give A3 or atleast a result that A2 has been the last release code effected.
Also where is the release related info stored ? I mean which tables...
Not the release strategy related info but the release effected info.
Dont worry about points...

Hi
Pur requisition Release Codes are stored in T161E table
Release code is linked with Release strategy in T161F table
Link the code with Release strategy field in EBAN table
Also check the fun modules
MM_CHECK_RELEASE_CODE_EQUAL_KI
MM_CHECK_RELEASE_CODE_NOT_KI
ME_RELEASE_REQUISITION
BAPI_REQUISITION_RELEASE
Reward points if useful
Regards
Anji
Message was edited by:
Anji Reddy Vangala

PR Release tracking as per date of release code

Dear All,
We have 4 code release strategy for PR approval.
We wanted to understand the date & time on which concerned person has approved PR as per release code in the Release strategy.
How to find out the same.
Thanks in advance for your help.
Rgds,
SHIV

Dear ,
MY requirement is different ,
in me5a is not mention release code but i want to know base on release code but can't check single pr ,
I know there is no std report for my requirement but i want to know the table name for release pr
I try this table but i did't get
T16FV
T16FS
EBAN
is there any solution ?
Regards
Shiv

Release strategy: User should release only with his highest release code

Hello,
Because of personel absences we want to configure the release strategy so that:
User A or user B releases in the normal case the first level of a PO (with release code 01).
User C (Manager) releases after release code 01 with release code 02.
User A is deputy of user C. In this case user B will release with code 01 and user A will release with code 02.
Because user A can use depending of the case release code 01 or 02 (C deputy) it must be avoided that user B sets release code 01 and 02 for the same purchase order.
Do you know about a solution for this issue
Br
Manuel

Dear W1N,
But the systems knows that A released with code 01 and when A tries to release with code 02 the system knows that the same person of release code 01 is trying with release code 02.
The aim is to avoid the second release from the same person and not to automate the release strategy.
In such a case A has to cancel the release for code 01 (ME28) and wait until B is reachable to do the release of code 01.
When C is absent A knows that his task is to release code 02.
Is this check really not possible?
Best regards
Manuel

Purchase requisition Release code

Hi,
Is there any DB table to find out which release code has been released for a PR line item.

CHECK FOLLOWING FIELDS IN EBAN:
FRGKZ
FRGZU
FRGST
FRGDT
FRGGR
FRGRL
GSFRG
RLWRT
THESE ARE RELATED WITH RELEASE...

PO release codes in report/list

Hello,
Is there any Purchse order report/list, where we can see the release status's. For eg if there are two level release codes applicable to a purchase order (L1 & L2) , can we see the release code and whether released or not ?
I know there is a way to restrict PO's based on dynamic selections of ME2N, but we require the actual relase code and status.
Regards,
Devendra

Hi,
You can the desired report through t/code: ME2L / ME2M , after executing the report go the change layout & select the Release code / release status field. Release staus field will be appear like , if first release is done , the status will come as X or if second release done, the it will come XX. And from release indicator field , you can get the code release code .
Regards,
Raghunath

Release code-Release group

Can there be 1 or many Release Groups assigned to a Release code and vice versa?
Please clarify.
- Pallu

hi,
Yes its possible..
Reason:
The object which is linked to the class and characteristics, may have different characteristics assigned, and for which you have different release codes assigned to release them differently...
So, those objects you assign to R. group and then in tnext tcode you assign these groups to the codes which will be responsible for the release of each document individually....
Ex: diff. release codes may be for one release based on document type other based on price etc...
Regards
Priyanka.P

ME54 - Restrict by purchase org and release code

Hi All,
We have a requirement that wants to allow one user to have multiple plants and for one for each one a different release code. Well release codes are controlled by auth M_EINK_FRG and plant is controlled by M_BANF_WRK. Because plant and release code is not in the same auth if I give multiple plants it will allow the greatest release code for all plants using M_EINK_FRG. Has anyone every figured out how to restrict different plants to unique release codes within one user. Did you use some sort of custom auth or user exit?
Our ideal situation would be able to restrict by purchase org but unfortunately it appears that the tcode ME54 does not call the auth M_BANF_EKO so we cannot restrict by purchase orgs. Has anyone thought of a way to get around this.
Thanks,
Mary

I believe what you want to achieve may be done through the PO release strategy - since PO releases are based upon the release code and the strategy. A PO for a certain purchase org could be defined for a certain set of release codes.

Final Release codes shows only 5 levels

Hi Experts,
I am configuring PO Release strategy with 8 release codes. Final release can be done with any release code without any dependecy with other codes.
When I am simulating the Release strategy, I am getting only 5 final release codes are coming, instead of 8 release codes.
Can somebody help me in this issue.
Thanks,
Satya

Hi,
Go to OMGS and check the Release statuses as well as release simulation who many release code is appearing.
regards

Release codes Indicators in Release procedure

Similar Messages

Maybe you are looking for