Release date for service pack for 9.2

When is the release date for weblogic 9.2 sp1? What bug fixes are included in this release?

I'd suggest contacting [email protected] for this type of information
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/

Similar Messages

  • Service Pack for Proliant installing successfully but returning failure in OSD task sequence

    Building bare metal servers with SCCM 2012 SP1 CU2 OSD and running into an issue with HPs where they attempt to install the Service Pack for Proliant 2013.02.0.  I am using a package with a program.  Here is the program command line:
    Hpsum.exe /use_latest /allow_non_bundle_components /current_credential /silent
    The application installs successfully but there is a distinct delay and then errors thrown that fails the TS.  Setting 'continue on error' is a work around but not what I want to have in the production environment.  How can I get around this issue?
     This is the same exact package and program that ran perfectly fine in SCCM 2007, but we are seeing this as a new issue since the migration to SCCM 2012.
    I'd like to solve this issue as well as get rid of the "Waiting for job status notification....InstallSoftware"
    Any suggestions?
    SMSTS.LOG
    Invoking Execution Manager to install software InstallSoftware
    12/3/2013 9:59:49 AM 1568 (0x0620)
    Installing software for PackageID='WCD002D2' ProgramID='Silent install' AdvertID='WC120008' has started, jobID='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
    InstallSoftware 12/3/2013 9:59:50 AM
    1568 (0x0620)
    Setting TSEnv variable 'SMSTSInstallSoftwareJobID_WCD002D2_WC120008_Silent install'='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
    InstallSoftware 12/3/2013 9:59:50 AM
    1568 (0x0620)
    Waiting for installation job to complete.. InstallSoftware
    12/3/2013 9:59:50 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:00:20 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:00:50 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:01:20 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:01:50 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:02:20 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:02:50 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:03:20 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:03:50 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:04:20 AM 1568 (0x0620)
    Launching command shell. OSDSetupHook
    12/3/2013 10:04:25 AM 2696 (0x0A88)
    Windows station: WinSta0 OSDSetupHook
    12/3/2013 10:04:25 AM 2696 (0x0A88)
    Desk"Apple-tab-span" style="white-space:pre;"> OSDSetupHook
    12/3/2013 10:04:25 AM 2696 (0x0A88)
    executing command: C:\WINDOWS\system32\cmd.exe /k
    OSDSetupHook 12/3/2013 10:04:25 AM
    2696 (0x0A88)
    executed command: C:\WINDOWS\system32\cmd.exe /k
    OSDSetupHook 12/3/2013 10:04:25 AM
    2696 (0x0A88)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:04:50 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:05:20 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:05:50 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:06:20 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:06:50 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:07:20 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:07:50 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:08:20 AM 1568 (0x0620)
    Waiting for job status notification... InstallSoftware
    12/3/2013 10:08:50 AM 1568 (0x0620)
    CompleteExecution received InstallSoftware
    12/3/2013 10:09:00 AM 3320 (0x0CF8)
    CompleteExecution processed InstallSoftware
    12/3/2013 10:09:00 AM 3320 (0x0CF8)
    Received job completion notification from Execution Manager
    InstallSoftware 12/3/2013 10:09:00 AM
    1568 (0x0620)
    Installation completed with exit code 0x80070001
    InstallSoftware 12/3/2013 10:09:00 AM
    1568 (0x0620)
    Installation failed with error (0x80070001)
    InstallSoftware 12/3/2013 10:09:00 AM
    1568 (0x0620)
    Setting TSEnv variable 'SMSTSInstallSoftwareJobID_WCD002D2_WC120008_Silent install'=''
    InstallSoftware 12/3/2013 10:09:00 AM
    1568 (0x0620)
    GetExecRequestMgrInterface successful InstallSoftware
    12/3/2013 10:09:00 AM 1568 (0x0620)
    Releasing job request, jobID='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
    InstallSoftware 12/3/2013 10:09:00 AM
    1568 (0x0620)
    Releasing of Job Request successful InstallSoftware
    12/3/2013 10:09:00 AM 1568 (0x0620)
    CompleteJob successful InstallSoftware
    12/3/2013 10:09:00 AM 1568 (0x0620)
    Entering ReleaseSource() for D:\_SMSTaskSequence\Packages\WCD002D2
    InstallSoftware 12/3/2013 10:09:00 AM
    1568 (0x0620)
    reference count 1 for the source D:\_SMSTaskSequence\Packages\WCD002D2 before releasing
    InstallSoftware 12/3/2013 10:09:00 AM
    1568 (0x0620)
    Released the resolved source D:\_SMSTaskSequence\Packages\WCD002D2
    InstallSoftware 12/3/2013 10:09:00 AM
    1568 (0x0620)
    pInstall->Install(sPackageID, sProgramName), HRESULT=80070001 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,361)
    InstallSoftware 12/3/2013 10:09:00 AM
    1568 (0x0620)
    Install Software failed, hr=0x80070001 InstallSoftware
    12/3/2013 10:09:00 AM 1568 (0x0620)
    Process completed with exit code 2147942401
    TSManager 12/3/2013 10:09:00 AM
    3372 (0x0D2C)
    TSManager 12/3/2013 10:09:00 AM
    3372 (0x0D2C)
    Failed to run the action: HP Server Pack for ProLiant 2013.02. 
    Incorrect function. (Error: 80070001; Source: Windows)
    TSManager 12/3/2013 10:09:00 AM
    3372 (0x0D2C)
    MP server http://MP_server.company.com. Ports 80,443. CRL=false.
    TSManager 12/3/2013 10:09:00 AM
    3372 (0x0D2C)
    Setting authenticator TSManager
    12/3/2013 10:09:00 AM 3372 (0x0D2C)
    Set authenticator in transport TSManager
    12/3/2013 10:09:00 AM 3372 (0x0D2C)
    Sending StatusMessage TSManager
    12/3/2013 10:09:00 AM 3372 (0x0D2C)
    Setting message signatures. TSManager
    12/3/2013 10:09:00 AM 3372 (0x0D2C)
    Setting the authenticator. TSManager
    12/3/2013 10:09:00 AM 3372 (0x0D2C)
    CLibSMSMessageWinHttpTransport::Send: URL: MP_server.company.com:80  CCM_POST /ccm_system/request
    TSManager 12/3/2013 10:09:00 AM
    3372 (0x0D2C)
    Request was succesful. TSManager
    12/3/2013 10:09:00 AM 3372 (0x0D2C)
    Set a global environment variable _SMSTSLastActionRetCode=-2147024895
    TSManager 12/3/2013 10:09:00 AM
    3372 (0x0D2C)
    Set a global environment variable _SMSTSLastActionSucceeded=false
    TSManager 12/3/2013 10:09:00 AM
    3372 (0x0D2C)
    Clear local default environment TSManager
    12/3/2013 10:09:00 AM 3372 (0x0D2C)
    Let the parent group (System Management Install) decides whether to continue execution
    TSManager 12/3/2013 10:09:00 AM
    3372 (0x0D2C)
    The execution of the group (System Management Install) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)
    TSManager 12/3/2013 10:09:00 AM
    3372 (0x0D2C)
    Failed to run the last action: HP Server Pack for ProLiant 2013.02. Execution of task sequence failed.
    Incorrect function. (Error: 80070001; Source: Windows)
    TSManager 12/3/2013 10:09:00 AM
    3372 (0x0D2C)

    Hello Guys!
    HP ProLiant Support Pack / Service Pack uses different Exit Codes, due to that this software support other operating systems than Windows. Therefore HP has standardized to use other Exit Codes, which Windows Detect as failures.
    HPSum Exit Codes:
    ExitCode 1 = "Installation Successful"
    ExitCode 2 = "Installation Successful, but a reboot is required"
    ExitCode 3 = "Installation was canceled, or no components were updated"
    EcitCode 9009 = "Installation did not complete.  Check the path and make sure that the Installation exists at the specified location"
    HP recommends to use following Batch File to workaround this issue for SCCM:
    =======================START_BatchFile=============================
    :Init
      @Echo Off
      Cls
    :Main
      Echo HP Proliant Service Pack Setup
      Echo Source : %~dp0
      Echo ===============================================================================
      Echo Installing the HP Proliant Service Pack Setup
      Echo Command: "%~dp0hpsum.exe" /use_latest /target:%COMPUTERNAME% /force /Use_WMI /s
      "%~dp0hpsum.exe" /use_latest /target:%COMPUTERNAME% /force /Use_WMI /s
    :CheckForErrors
      Echo HP Proliant Service Pack Stauts:
      If "%errorlevel%"=="0" (
         Echo *******************************************************************************
      Echo                            INSTALLATION FAILED!
      Echo *******************************************************************************
      exit 1
      If "%errorlevel%"=="1" (
         Echo Installation Successful!
         exit 0
      If "%errorlevel%"=="2" (
         Echo Installation Successful, but a reboot is required.
         exit 3010
      If "%errorlevel%"=="3" (
         Echo Installation was canceled, or no components were updated
         exit 0
      If "%errorlevel%"=="9009" (
         Echo Installation did not complete.  Check the path and make sure that the
      Echo Installation exists at the specified location:
      Echo Path: %~dp0
      Exit 1
    :End
      Echo An unknown status code was returned from the PSP.
      Echo This status code is [%errorlevel%].  This will be treated as a success,
      Echo but please check the installation to make sure it completedly properly!
      Exit 0
    =======================STOP_BatchFile=============================
    God Luck!
    Best Regards Anders Horgen

  • Service Pack for iTunes problems?

    Does anyone know more about the $49 service pack Apple supposedly has for fixing iTunes 5+ install problems? Is it specific to iTunes, or is it an overall service pack for all known software issues? I am quite confused now by all of the fixes floating around in this discussion (although grateful for the fine assistance of various people) because I can't afford to lose any more functionality on my PC than I already have.
    If a service pack does exist, shouldn't Apple provide this for free?
    Too bad there isn't a computer products safety commission (like the Consumer Products Safety Commission). If there were, Apple would have to do a recall of this defective product that has harmed a lot of PCs.

    Apple is not selling any sort of "service pack". Any charge you may get is for providing the technical support itself (support calls are not free unless you have a Mac that's either less than 90 days old or is under AppleCare), not for providing any patches. iTunes 5.01 has been released and is the only "patch" that I know of for iTunes 5, so if you're having problems with iTunes 5.0, try 5.01.

  • How to find Service Pack for R3 System...

    Hi
    Its very easy to find Service Pack for BI system.
    But once i try to do for R3 System , i find lot of software components like:
    SAP_ABA
    SAP_BASIS
    PI_BASIS
    ST-PI
    SAP_BS_FND
    SAP_BW
    WEBCUIF
    SAP_AP
    SAP_HRCRU
    SAP_HRCPT
    SAP_HRCPH
    SAP_HRCNZ
    SAP_HRCNO
    SAP_HRCNL
    SAP_HRCMY
    SAP_HRCMX
    and many more... so i m confused which software component i should choose to find exact software component.
    Thanks...

    Hi,
    Log onto your system. From any screen, select System > Status. In the block labelled "SAP system data", hit the magnfying glass. Although there are many objects that can be updated, the most critical is "SAP Basis". Under the column "level" you can see the highest rev you have installed.
    Hope it helps.
    Thanks and Regards,
    MuraliManohar.

  • Service packs for Weblogic 6.1 with J2EE 1.3 disabled

    We are planning to migrate to Weblogic 6.1 from 5.1.
    Is BEA supporting 6.1 release with J2EE 1.3 disabled? I see that 6.1
    with J2EE 1.3 is at sp4, whereas there is no service pack for 6.1 with
    J2EE 1.3 disabled.
    If BEA is not supporting 6.1 release with J2EE 1.3 disabled, then we
    have to go to 6.1 with J2EE 1.3.

    Rakesh Kalra wrote:
    We are planning to migrate to Weblogic 6.1 from 5.1.
    Is BEA supporting 6.1 release with J2EE 1.3 disabled? I see that 6.1
    with J2EE 1.3 is at sp4, whereas there is no service pack for 6.1 with
    J2EE 1.3 disabled.
    If BEA is not supporting 6.1 release with J2EE 1.3 disabled, then we
    have to go to 6.1 with J2EE 1.3.Why is 1.3 a problem for you? In any case, there must be a way to do what you want.
    Looking at the Service Packs, the last couple sentences of the description discuss it.
    Maybe you would just need help with the WLS Start scripts. Or you would need to start
    with a base product that has 1.3 disabled and take it from there. I'm sure someone
    could find the files for you, they are just not out in the open.
    Best Wishes,
    Wayne Scott
    http://commerce.bea.com/SoftwareProductDetailWLS?SWName=WebLogic+Server+Service+Pack&SWVersion=Version+6.1&SWPlatform=Service+Pack+2+for+UNIX
    Evaluation Product Details
    Service Pack 2 for WebLogic Server 6.1 (UNIX platforms)
    File Size
    47,543,493 Bytes
    Description
    This service pack contains files that resolve some issues pertaining to the released
    product. A detailed list of these issues is provided in the release notes.
    The Service Pack upgrade installers for WebLogic Server 6.1 will update all existing
    WebLogic installations to run with J2EE 1.3 features enabled when starting the server
    with the startscripts provided within the WLS distribution. With J2EE 1.3 features
    enabled, WebLogic Server will still inform you whenever an application is deployed that
    uses J2EE 1.3 features. If you desire to disable J2EE 1.3 features and you had
    originally installed WebLogic Server 6.1 with J2EE 1.3 feature disabled, you can restore
    the WebLogic Start scripts from the backups created during the Service Pack
    installation. Go to "Viewing and Recovering Files Replaced or Deleted by a Service Pack
    Installation" on our Installing BEA WebLogic Server Page.

  • Service pack for BO enterprice XI 3.1

    Dear Friends,
    we are using evalution veriosn of BOE XI 3.1 with 90 days key. i installed BOE XI 3.1 now i want to
    update it on highest level of Service Pack can you please tell me how can i obtain latest service pack for
    BOE XI 3.1 while we are not customer of BO. We are customer of SAP but when i try to download BO SP.
    Its give me error that you are not authorized.
    Any help will be higlly Appricated.
    Regards
    Malik

    Try to open an OSS ticket about this and request access to the patches.
    Regards,
    Stratos

  • Service Pack for Primavera Contractor v4.1

    Hello,
    Is there any way to get a service pack for Primavera Contractor v.4.1? I have a computer that we had to replace that had the software downloaded on it which crashed. I want to put the software on the replacement computer with the available license. Please let me know.
    Thank you!
    Bryce

    Primavera Project Management P6 version 7.0 (P6 v7) Service Pack 3 [ID 1275307.1]
    You can try the below link but you will still need to sign into Oracle Support with a valid CSI #.
    https://updates.oracle.com/Orion/Services/download/p10622440_7000_Generic.zip?aru=13296827&patch_file=p10622440_7000_Generic.zip

  • Service pack for 5.1

    ""Make sure you grab the latest service pack for 5.1""
    wow - where i can get it?

    You can try this...to download service pack!!
    http://commerce.beasys.com/downloads/weblogic_server.jsp
    Regards
    Mauricio

  • Applications 11i Release 10 CD/Media Pack for Microsoft

    Applications 11i Release 10 CD/Media Pack for Microsoft
    Could some one give me the minimum system configuration to load Oracle Applications 11i Release 10 CD/Media Pack for Microsoft Windows for personal use ?
    I want to buy this CDS from Oracle Store .
    Thanks
    Naveen

    You need to apply 11.5.10 Oracle E-Business Suite Consolidated Update 2 (CU2)
    - Apply patch 4318672 -- 11.5.10.2 Technology Stack Validation Patch
    - Apply AD patch 4229931 -- The most recent replacement for this patch is 4502904
    - Apply patch 4297568 on the concurrent processing server node
    - Apply the CU2 driver (u3460000.drv)
    Metalink Note: 316366.1 should be helpful

  • Applications 11i Release 10 CD/Media Pack for Microsoft Windows

    Could some one give me the minimum system configuration to load Oracle Applications 11i Release 10 CD/Media Pack for Microsoft Windows for personal use ?
    I want to buy this CDS from Oracle Store .
    Thanks
    Naveen

    You need to apply 11.5.10 Oracle E-Business Suite Consolidated Update 2 (CU2)
    - Apply patch 4318672 -- 11.5.10.2 Technology Stack Validation Patch
    - Apply AD patch 4229931 -- The most recent replacement for this patch is 4502904
    - Apply patch 4297568 on the concurrent processing server node
    - Apply the CU2 driver (u3460000.drv)
    Metalink Note: 316366.1 should be helpful

  • Service Pack for WLS 5.1

    Hi all,
    Does any of you know which was the latest Service Pack for Weblogic Server 5.10? AFAIK, it was SP12, but I can't find information about it or if there was any other service pack for this oldie (I know I shouldn't be using it, but that's my customer's call)
    Appreciate any help / pointers you might give me.
    Regards

    Hi all,
    Does any of you know which was the latest Service Pack for Weblogic Server 5.10? AFAIK, it was SP12, but I can't find information about it or if there was any other service pack for this oldie (I know I shouldn't be using it, but that's my customer's call)
    Appreciate any help / pointers you might give me.
    Regards

  • Service packs for wls6.0

    How come each service pack for WLS 6.0 requires a download of the whole applications
    instead of a patch?

    To only get patch or service packs, you should login to websupport.
    (http://www.bea.com/support/web.shtml)
    Only entitled customers are eligible to receive service packs. Or else you have to
    download the whole
    bungle which 60 + SP's.
    Anne wrote:
    How come each service pack for WLS 6.0 requires a download of the whole applications
    instead of a patch?

  • Service pack for WebLogic 6.1

    Here I can find service pack for WebLogic 6.1, Win2K?
    Thank you,
    Jacob Nikom

    Jacob,
    If you need just the service pack for WLS 6.1 , you will need to have a
    websupport login and password. Please refer to this url for more
    information on this.
    http://contact.bea.com/bea/www/BEACustRegLogin.jsp
    http://websupport.bea.com/custsupp/
    Hope this helps
    Raj Alagumalai
    [email protected] wrote:
    http://commerce.beasys.com/downloads/weblogic_server.jsp
    "jacob nikom" <[email protected]> wrote in message
    news:3bb8c8c7$[email protected]..
    Here I can find service pack for WebLogic 6.1, Win2K?
    Thank you,
    Jacob Nikom

  • Crystal Reports XI Release 2 and Service Pack 2 upgradation

    Hi,
    I need your support to upgrade and migrate to Crystal Reports XI Release 2 and Service Pack 2 in my development server.
    I am currently upgrading my Crystal enterprise version 9 with the Crystal Reports XI Release 2 and Service Pack 2. I have the below questions to be clarified. Appreciate if you can reply me ASAP. Thanks.
    My Environment:
    O/S - Windows Server 2003 Standard Edition; Version 5.2 (Build 3790); Service Pack - 1
    RAM size - 1 GB
    Installed software - Crystal enterprise 9
    1) After successfully upgraded with the XI version, all my current user accounts and existing reports are not available in the upgraded version. Pl. suggest me, how to migrate my existing connections and all the existing reports?
    2) In my server, SQL Server is not installed. But SQL Server instance (SQL Server 7.00.623) is running in my taskbar (desktop). If I stopped the SQL Server instance, the "Crystal APS" in the Crystal Configuration Manager is stopped. What information is stored in the SQL Server?
    3) What is the default SQL server version bundled with Crystal Reports XI Release 2 Service Pack 2? What is the SQL server version you recommand?
    4) Will the Crystal Reports XI Release 2 SP2 supports the SQL Server 7.00.623?
    Regards
    Sanrajesh

    Hello, Sanrajesh,
    You have been using Crystal Enterprise 9.0 and now you are installing Crystal Reports XI R2. Is that correct?
    Crystal Reports XI R2 is just the Crystal Reports designer and runtime for development.
    Crystal Reports XI R2 does not have the functionality of Crystal Enterprise. The upgrade would be Crystal Enterprise 9.0 to Business Objects Enterprise XI R2. (11.5)
    A full BusinessObjects Enterprise installation will install the appropriate MS SQL Server for it's own use.
    Will this be the Enterprise server or just the Development system to create an application connecting to your BusinessObjects Enterprise server?
    What development language will you be programming in?
    If you have BusinessObjects Enterprise installed elsewhere you only need the appropriate development components on your system and connect to the server in code.
    Our BusinessEnterprise Support team would assist you in the upgrade from Crystal Enterprise 9 to Business Objects Enterprise XI R2 if that was your plan.
    Then we could discuss the development requirements.
    Elaine

  • Service entry sheet:No provision for service entry for purchase order

    Hi.I create a Purchase order with one item.The Item category was D(Service).Also lines of Service number was input in the Service tab of the item detail.After save the Purchase order,I goto t-code ML81N to Maintain the Service entry sheet.When I input the Purchase order number and item number and press enter,the SAP raise an error message box with following text:
    No provision for service entry for purchase order 4500000149 00010
    Message no. SE198
    Diagnosis
    The "GR =NO" (no goods receipts) indicator has been set in the PO item. It is thus not possible to enter services against this purchase order.
    I don't know why and how to resolve this problem.So I need the experts to give me some advice.Thank you so much.
    Regards
    Yoda

    pls check in ur PO at item details in delivery tab whether goods receipt checkbox is unticked.if yes then tick it and then process.
    regards,
    indranil

Maybe you are looking for