Release Date of EM Grid Control 10.2 for HP-UX and Solaris?

Hello,
does anybody know the estimated release date of EM Grid Control 10.2 for HP-UX and Solaris?
Regards,
Martin

We are also very curious about that here. If anyone has any information or estimates it would be much appreciated.
We've ran into the following problem:
Note 338123.1 After Upgrading Catalog Database to 10.2 Cannot Use RMAN Catalog With 10.1 Grid Control
And have been told we have the following options:
Workarounds available:
1. Use dbcontrol for the 10.2 database to maintain the recovery catalog until 10.2 Grid Control is available
2. Use the RMAN command line utility
3. Use the 10.2 Management Agent when available.
Which basically means we are out of luck on OEM RMAN until 10.2, and hope to hear it may be available in the near future.

Similar Messages

Which? - License for OEM Grid Control or just the additional Packs and Add-Ins?

I took a look at the price list and I wanted to clarify the "Named User Plus". The Diagnostic and Tuning Packs are each shown as $100 for the named user. As a DBA, if I have a named user license for these two management packs, does this mean that I can manage as many databases as needed with these two management packs?

Wow, 25 separate dbcontrols sound like a nightmare.
By the way, our Oracle rep just happened to come here yesterday, and he validated what was said here.
You can install the Grid Control free; you simply un-check the Packs/Add-Ins during the install.
As I understand it, you would install the Grid Control Agent first on each server, then when you install Oracle RDBMS, the Universal Installer will detect the Agent and enable the Grid Control instead of the Database Control.
Then you install the OEM Grid Control repository and software on a separate server, and that is where you manage all of the Oracle RDBMS servers from.
He also said to use the highest version Grid Control Agents on the database servers and repository server and keep the versions of that software in sync, which is separate from the Oracle RDBMS version.

License for OEM Grid Control or just the additional Packs and Add-Ins?

I have searched the forums and found the link below in a discussion about the Enterprise Manager Grid Control, but nobody answered this question specifically:
Can you freely install and use the Grid Control (with no additional Packs or Add-Ins)? Or does the Grid Control itself require a license?
P.S. The price list linked here only displays prices for Grid Control Packs and Add-Ins:
www.oracle.com/corporate/pricing/eplext.pdf

Wow, 25 separate dbcontrols sound like a nightmare.
By the way, our Oracle rep just happened to come here yesterday, and he validated what was said here.
You can install the Grid Control free; you simply un-check the Packs/Add-Ins during the install.
As I understand it, you would install the Grid Control Agent first on each server, then when you install Oracle RDBMS, the Universal Installer will detect the Agent and enable the Grid Control instead of the Database Control.
Then you install the OEM Grid Control repository and software on a separate server, and that is where you manage all of the Oracle RDBMS servers from.
He also said to use the highest version Grid Control Agents on the database servers and repository server and keep the versions of that software in sync, which is separate from the Oracle RDBMS version.

Is there is any way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory

Hi
Can Configuration Manager provide a way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory. How can I know what amount of data is consumed during that process

Place archive_reports.sms in %systemroot%\ccm\inventory\temp\ for both 64-bit and 32-bit computers.
There are two situations where you can use this depending on the type of client:
1. To keep inventory reports on a client (that is not an MP), create the following file:
%systemroot%\ccm\inventory\temp\archive_reports.sms
2. To keep inventory reports on a MP (that is also a client), create the following file:
<x>:\sms_ccm\inventory\temp\archive_reports.sms
The XML file will be saved in the inventory\temp folder.
More information on the above here: http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx

Dgutil.pl line 99 ERROR when creating 11.2.0.3 data guard via GRID CONTROL

Oracle Grid Control 11g Release 1 (11.1.0.1.0)
(64bit)
Oracle Enterprise Linux Server release 5.4 x86_64
Oracle Database 11.2.0.3 (64bit)
1. Grid Control>Targets>Databases
2.Click on pc01prmy (Primary)
3.Availability > Data Guard > Setup and Manage
4.Add Standby Database
5.Create a new physical standby database.
Fails with message:
38706 at /u01/app/oracle/agent11g/sysman/admin/scripts/db/dg/dgutil.pl line 99.
I can create a standby with a rman script without problems, but via the Grid Control page fails.
Have you seen this before?

I contact Oracle Support on this issue, here are the details.
Generic Note
Hi Marcelo, the note you sited Creating Standby Database With Enterprise Manager Failing [ID 1400482.1
Says something a little different than what you tried.
You did RECOVER DATABASE for manual recover and the error says use backup control file.
For a standby to do manual recovery it's
*alter database recover standby database ;*
It may behave better.
But the note implies to just apply enough redo to have the standby consistent enough to turn on flashback.
This can be done by starting managed recovery and applying some redo log sequences.
So the flashback being turned on is too soon, but should have worked anyway. I think it would turn on managed recovery though.
This also happens since the job doesn't use dorecover since recovery can be done with managed recovery.
So most likely there isn't enough activity on the primary and the online redo has not been archived yet.
So some log switches on the primary will send enough redo to get consistent so you can turn on flashback and finish it.
*So why did it happen?*
Possibly
Bug 13250486 - ADD STANDBY DATABASE FOR TARGET WITH FLASHBACK ON FAILS WITH ERROR
Base bug 12923814 FLASHBACK AND ARL DELETION OPTIONS IGNORED IN ADD STANDBY DATABASE WIZARD
fixed in Grid Control 12.1c
There is currently no patch available for 11.1.0.1 Grid Control. We would have to open a bug to confirm you hit this in 11.1.0.1 and get a patch.
*A workaround would be to turn off flashback at the primary then try to create the standby.*
*Once the standby is created you can turn flashback back on for the primary and if required, the standby.*
You can try again to see, or finish the standby manually as I stated above.
I will still need the diagnostic information below.
Action Plan
=========
The product verion in this SR is for 12.1.0.1 Grid Control. I assume it should be 11.1 since you stated it is.
Grid Control job log that shows the errors.
alert logs from the primary and standby.
Please run these two diagnostic scripts and upload the output.
Script to Collect Data Guard Primary Site Diagnostic (Doc ID 241374.1)
Script to Collect Data Guard Physical Standby Diagnostic (Doc ID 241438.1)
Edited by: Marcelo Marques - ESRI on Mar 24, 2012 9:51 AM

Create data guard using grid control 10gR3?

Has anyone been able to create a data guard of 10g R2 (10.2.0.3 dbs) using Grid Control 10gR3?
My creation stopped on cloning the standby db step. And i had to finish it manually but i'm just wondering if it has worked for anyone else?

One step further. I enabled debug tracing for the agent and noticed that the creation of the windows service causes an error.
-: Thu Sep 27 10:14:53 2007: DEBUG: clone_util.runOradim(): Running oradim to install service for dg2
-: Thu Sep 27 10:14:53 2007: DEBUG: clone_util.runOradim(): Command: D:\oracle\product\10.2.0\db_1\bin\oradim.exe -NEW -SID dg2
-: Thu Sep 27 10:14:53 2007: DEBUG: db_common.tempLocFallback(): Test filename: D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\test_temp_location.2976
-: Thu Sep 27 10:14:53 2007: DEBUG: db_common.removeFile(): To remove file D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\test_temp_location.2976
-: Thu Sep 27 10:14:53 2007: DEBUG: db_common.tempLocFallback(): Tested TEMP location: D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/
-: Thu Sep 27 10:14:53 2007: DEBUG: clone_util.runOradim(): Output file: D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\dbclone.2976
-: Thu Sep 27 10:14:53 2007: ERROR: clone_util.runOradim(): D:\oracle\product\10.2.0\db_1\bin\oradim.exe -NEW -SID dg2:
The trace refers to file D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\dbclone.2976 :
DIM-00019: create service error
O/S-Error: (OS 1057) The account name is invalid or does not exist, or the password is invalid for the account name specified.
Although the other steps complete succesfully (using the same credentials), it fails creating the service. Don't know why, yet...

Using Data Pump from Grid Control to import schema

Hi,
I have 2 10g oracle databases on 2 different windows servers. The databases are called: source and dest.
In dest I have created a database link to source.
I want to import a schema from source to dest.
I log on Grid Control and in the maintenance tab I click the link Import from database.
I choose import from schema and the database link I created earlier.
I then choose the schema name.
In the page Import From Database: Options I expand the advanced options.
I choose Exclude Only Objects Specified Below and I add a row that looks like this:
object type: TABLE
object name expression: EXCLUDE=TABLE:"IN('TEST6', 'TEST7')"
As I submit the job I get this error message:
Import Submit Failed
Errors: ORA-39001: invalid argument value ORA-39071. The value of NAME_EXPR is misformed. ORA-00920: invalid relation operator.
I have tried several ways, but I am still getting the same error.
Any suggestion will be appreciated.

Hi,
Thanks for your replay.
I have already tried the following with back slash:
EXCLUDE=TABLE:\"IN('TEST6', 'TEST7')\"
and I get the same error message.
If you have the correct syntax could you send it to me?
Regards.

Grid Control : Change Management Across Non-Prod and Prod

All,
I had some questions with regards to Grid Control Implementation Architechture on Prod and Non-Prod Env's
The best practice is to configure a production Grid Control (GC) environment to monitor only production targets. This prevents nonproduction targets from adversely impacting a production environment.Another issue could be the compliance policy where in the production systems are to be isolated from Non-Production Environments.
If this is the case then we have to have 2 GC environments , 1 for Prod and 1 for Non-Prod. In such a scenario how well can we do change management (Version control ) across the Non-Prod and Prod Environments ?
To be more specific
How is version control managed for Oracle builds if we have separate GC for Prod and Non-PROD? (Change Management pack / Configuration Management Packs are there but what is the real depth of these? )
Change management for the Oracle Environments from DEV -> Test -> Pre-Production-> Production? We aim to have consist build across the environments can we achieve this if the GC is managed by Different OMS/OMR and if we have 2 separate environments how do we sync the GC environments managing PROD/NON-PROD after a change?

This is feature is not there in 10.2
This situation can be avoid by chagning the 9i port to 1522
or install the GC on diffrent box

Grid Control tuning Advisors for 9i

Hi all,
I'm trying to manage a 9.2.0.1 database with Grid Control 10.2.0.2
Everything is working fine except in the Performance tab, i can't find links for Memory Advisor and Undo Advisor.
This Link below provides a Database Management Matrix and Memory/Undo advisor are listed in 9i version
http://www.oracle.com/technology/products/oem/pdf/em_gc_8i-9i_4.pdf
Any help ?

Hi MarGur
I try to help you. The OEM Grid Control in some times not discover the Oracle 9i databases and you must to add manually.
First, check in your target machine that the user owner of agent software have rights of read and write in the ORACLE_HOME directories of Oracle 9i databases.
Go to Grid Control Console
Select Targets ---> Databases
Press Add --> Select the host ebisdb2.oneshield.com and press continue
The automatic discover process begin. When finished is very normal that nor discover the Oracle 9i databases. You press the Add manually button
in the page that appear you must entry all the configuration information of database:
ORACLE_HOME directory
DBSNMP USER
DBSNMP PASSWORD
HOSTNAME
PORT
SID
Check that the dbsnmp user in your database is unlock and press the TEST button to verify the connection work fine.
After this many windows appear of configuration process, and you will put the sys password and host credentials.
If you have problems, tell me
Regards

Why Grid control will mis-judge agent state and send mail notifications?

Sometime grid control will send mail notifications while the agent is still up.No log about network problems occur.So what about the root cause for this kind of issue?Has anyone falled into the same situation?And how to resolve?
Thanks!

Which alert are you getting?

Product Release Date being default set to 01-Jan-2000 when exporting and importing product file

Hi there,
Just putting this out there to see if anyone else has experienced this problem.
We've just redeveloped an art site that relies on the product release date to order work, newest first, by the date they added it {tag_productlist,,,20,releasedate,true,true}
However, we've hit an issue whereby the 'release date' field is set to 01-Jan-2000 when we export and then import the product file, thus chnaging the ordering. The date can't be set on the import file (unlike web apps) and we haven't changed thousands of products manually. BC support have been stumped, suggesting it's our Mac's system date, but this is set automatically and accurate...and we don't want to change the release date anyway, that should just be the date the product was originally released.
Any thoughts or help would be greatfully received as this was a key part of the site design/development. This is the site http://hanguppictures.com
Cheers
Paul

Ran into the same issue. I was using the release date to flag latest products, regardless of ordering. Unfortunately running a product import then destroyed all that work.
Found this thread with a staff reponse regarding it not being possible to set release dates using import, but it doesn't explain why release dates get reset.

Is Grid Control 10.2.0.5 Supported on Solaris x86?

Hi There,
I went on the oracle website to download the full installer version 10.2.0.1 (Including Agent, Repository, OMS, and Management Packs) and the Patch Installer version 10.2.0.5 (Including Agent, OMS, and Management Packs) for SOLARIS X86, however, it was not there. Is this OS supported for this version?
http://www.oracle.com/technology/software/products/oem/index.html
Thanks,
J

user560159 wrote:
Hi There,
I went on the oracle website to download the full installer version 10.2.0.1 (Including Agent, Repository, OMS, and Management Packs) and the Patch Installer version 10.2.0.5 (Including Agent, OMS, and Management Packs) for SOLARIS X86, however, it was not there. Is this OS supported for this version?
http://www.oracle.com/technology/software/products/oem/index.html
No.. Its not certified on Salaris X86.
Please read
Oracle Enterprise Manager Grid Control Certification Checker [ID 412431.1]
Regards
Rajesh

Grid control 10.2.0.5 upgrade and application server shutdown

Current: 10.2.0.3, doing upgrade to 10.2.0.5
OS: Redhat 4
During the installer checks, Oracle is telling me the oracle application server will be shut down temporarily. What oracle application server? I did not know one gets installed when you install grid control. I thought that it just uses the http_server.
What is it shutting down? I stopped the oms with opmnctl stopall, prior to running the installer. I believe that was in the readme.txt

when you click on the tab "Application Servers" on the far upper left site of the GridControl (right next to Hosts, Databases, ...) then
you will see of which components the Oracle Application server exists (HTTP-server, OC4J, WebCache, ...). Therefore the HTTP-server is just
part of the application server - and if the application server gets shut down it's meant that all components wil get shut down...
HTH

Data Loading issue - No local currency found for plant 0001 and sales org

Hi Guru's,
I am trying to load data to 0PLANT_ATTR and I am getting the following error message:
1. No local currency found for plant 0001 and sales organization 0001
2. Plant 1010 : No sales organization found; Local currency cannot be checked
I have also maintained the global setting for currencies in RSA1 for that particular Source System.
Please let me know how to resolve this issue.
Thanks in advance.

Hi,
Refer the lnik and the note mentioned it.
Re: Problem when storing master data 0PLANT_ATTR-Full (i.e. Full Update)
With rgds,
Anil Kumar Sharma .P

How to display three months data in ALV grid control

Hi
Thanks for all.I have tried now it is working but as per requirement month name and cumulative total will display like this format.cumulative total means month1amount+ month2amount+month3amount.And one more thing month range will change some times means sometimes i will give January date to march date and sometimes i will give July date to October date. but date range is same means between dates range is three months.
please tell me how to display.
GAS PRESSURE WELDING COST EFFECTIVENESS                                        Dec-11                         Cummulativetotal
Sr. No             Item             Unit           Rate          Qty           Amount
GAS PRESSURE WELDING COST EFFECTIVENESS                                      Jan-12
Sr. No             Item             Unit           Rate          Qty           Amount
GAS PRESSURE WELDING COST EFFECTIVENESS                                     Feb-12
Sr. No             Item             Unit           Rate          Qty           Amount
Thanks & Regards,
Vasu.
Moderator message: only one thread per issue, please.
Edited by: Thomas Zloch on Feb 20, 2012

Hi
Thanks for all.I have tried now it is working but as per requirement month name and cumulative total will display like this format.cumulative total means month1amount+ month2amount+month3amount.And one more thing month range will change some times means sometimes i will give January date to march date and sometimes i will give July date to October date. but date range is same means between dates range is three months.
please tell me how to display.
GAS PRESSURE WELDING COST EFFECTIVENESS                                        Dec-11                         Cummulativetotal
Sr. No             Item             Unit           Rate          Qty           Amount
GAS PRESSURE WELDING COST EFFECTIVENESS                                      Jan-12
Sr. No             Item             Unit           Rate          Qty           Amount
GAS PRESSURE WELDING COST EFFECTIVENESS                                     Feb-12
Sr. No             Item             Unit           Rate          Qty           Amount
Thanks & Regards,
Vasu.
Moderator message: only one thread per issue, please.
Edited by: Thomas Zloch on Feb 20, 2012

Release Date of EM Grid Control 10.2 for HP-UX and Solaris?

Similar Messages

Maybe you are looking for