Release date of LMS 4.1?

What is the expected release date for LMS 4.1?
-David

Hi David,
     New releases of LMS typically have come out around the May / June time frame , but so far I haven't seen anything definitive regarding the date when LMS 4.1 will be released. Do you have an urgent requirement ?  I'd suggest you keep watching this forum / re-post you question in say 3 months time.
Regards
Derek Clothier

Similar Messages

  • Release time of lms 4.2

    who knows the release date of LMS 4.2 and would you please explaine how is it works in integration with NSC ?
    and for us to purcase do we have to buy both of them ?
    thank you

    LMS 4.2 was released earlier this month. Release notes and user guides are all posted in the LMS Support page.
    The LMS data sheet (posted here) explains that there is also now a bundle "Cisco Prime Infrastructure" that includes both LMS and NCS.
    Please refer to the Cisco Prime Infrastructure Ordering and Licensing Guide for part numbers.
    Unfortunately, the product communications have not been completely clear about the implications and rationale for LMS-only customer's options for moving forward. I hope we will see an FAQ in the future.

  • Problem restoring LMS 2.6 data to LMS 4.0

    Hello,
    I'm trying to migrate from LMS 2.6 on a Windows 2003 server to LMS 4.0 on Windows 2008 R2.
    Two things I'll note here which might help future people attempting to use the LMS 4.0 backup/restore scripts as detailed in the migration document:
    1) Make sure nobody has installed cygwin on the server before you run the backup scripts. If they have, remove it and the reg keys.
    2) On the target server make sure to run the restore script CMD session using runas or disable UAC on Windows 2008 or the restore scripts will fail
    My next problem I can't get past. I've been running the restore since yesterday morning and it still hasn't finished. It hasn't moved from 40% complete migrating the IPM data but in the last 24 hours it has eaten up 6Gb more RAM.
    C:\Users\zadmkovesa>e:\sw\CSCOpx\bin\perl.exe e:\Sw\CSCOpx\bin\restorebackup.pl
    -d e:\lmsbackup\ -t e:\lmsbackup\temp
    Restore started at : 2011/03/15 11:21:12
    Please see 'E:\Sw\CSCOpx\log\restorebackup.log' for status.
         USER ID is ..................................... : zadmkovesa
         OS of the backup archive is..................... : Windows
         WARNING: The temp directory e:\lmsbackup\temp\tempBackupData is not empty.
                  An earlier instance of restore operation might have been interrupt
    ed before completion.
                  If you proceed with the restore operation, this directory and its
    sub directories will be deleted.
                  Do you want to continue?  (y-continue or n-quit, y/n)?y
         Generation to be restored is ................... : 0
         Backup taken from............................... : e:\lmsbackup\
         Common Services version in the backup data is... : 3.0.6
         Common Services is installed in................. : E:\Sw\CSCOpx
         The temp folder for this restore program........ : e:\lmsbackup\temp\tempBa
    ckupData
         Applications installed on this machine ......... : [Common Services][Campus
    Manager][Resource Manager Essentials][Device Fault Manager][cvw][cwlms][cwporta
    l][ipm][upm]
         Applications in the backup archive ............. : [Common Services][Campus
    Manager][Resource Manager Essentials][Device Fault Manager][cvw][ipm]
         WARNING: The list of applications installed on this CiscoWorks server does
    not match the list of
                  applications in the backup archive. If you restore data from this
    backup archive,it may
                  cause problems in the CiscoWorks applications.
                  Do you want to continue the restore operation?  (y-continue or n-q
    uit, y/n)?y
         Applications to be restored are................. : [Common Services] [Campu
    s Manager] [Resource Manager Essentials] [Device Fault Manager] [cvw] [ipm]
         Available disk space in NMSROOT................. : 237023900 Kb
         Required disk space in NMSROOT.................. : 38857544 Kb
         (The temp and NMSROOT are on same device, therefore this required disk spac
    e includes temp space)
      Copying the backup files to the temporary location [e:\lmsbackup\temp\tempBack
    upData]
      preRestore of [Common Services] has started.
      preRestore of [Common Services] has completed.
      preRestore of [Campus Manager] has started.
      preRestore of [Campus Manager] has completed.
      preRestore of [Resource Manager Essentials] has started.
      preRestore of [Resource Manager Essentials] has completed.
      preRestore of [Device Fault Manager] has started.
      preRestore of [Device Fault Manager] has completed.
      preRestore of [cvw] has started.
      preRestore of [cvw] has completed.
      preRestore of [ipm] has started.
    Not all data from IPM 2.6 will be migrated to LMS 4.0. For information on the d
    ata that is migrated, see the "Migrating Data From LMS 2.6 or 2.6 SP1" section i
    n the "Migrating Data to CiscoWorks LAN Management Solution 4.0" chapter in the
    LMS4.0 Installation Guide for details. Do you want to continue[Y/N]:[Y]y
    Do you want the IPM 2.6 collectors present in the backup to be DELETED from the
    source routers [Y/N]:[Y]n
      preRestore of [ipm] has completed.
      doRestore of [Common Services] has started.
              License check started.
                 WARNING: The license details in the server are different from the b
    ackup data.
                          After restoring, please check the license available in the
    server.
                 WARNING: Your current license count is lower than your earlier lice
    nse count.
                          If you restore the data now, devices that exceed the curre
    nt licence count
                          will be moved to Suspended state.
              License check completed.
              Restoring certificate.
                 WARNING: Cannot evaluate the hostname, hence the certificate
                          may be from this host or another host.
                          [  Certificate not overwritten  ]
              Restored Certificate.
              Restoring Common Services database.
              Restored Common Services database.
              Restoring CMIC data.
              Restored CMIC data.
              Restoring CMC data.
              Restored CMC data.
              Restoring Security Settings.
                    INFO:
                    Backup Mode is ACS. In LMS we are not supporing ACS for AAA.
                    Setting Login Mode to CiscoWorks Local.
              Restored Security Settings.
              Restoring DCR data.
              Restored DCR data.
              Restoring Certificate key store.
              Restored Certificate key store.
              Restoring JAAS configuration.
              Restored JAAS configuration.
              JRM Job Migration started.
              JRM job Migration done.
      doRestore of [Common Services] has completed.
      doRestore of [Campus Manager] has started.
      doRestore of [Campus Manager] has completed.
      doRestore of [Resource Manager Essentials] has started.
    10% of RME  Restore completed
    30% of RME  Restore completed
    50% of RME  Restore completed
    70% of RME  Restore completed
    100% of RME  Restore completed
      doRestore of [Resource Manager Essentials] has completed.
      doRestore of [Device Fault Manager] has started.
    10% of DFM Restore completed
    30% of DFM Restore completed
    50% of DFM Restore completed
    80% of DFM Restore completed
    Going to modify Eight PM report
    Modified Sucessfully Eight PM report
    100% of DFM Restore completed
      doRestore of [Device Fault Manager] has completed.
      doRestore of [cvw] has started.
      doRestore of [cvw] has completed.
      doRestore of [ipm] has started.
    10% of IPM migration completed
    20% of IPM migration completed
    30% of IPM migration completed
    40% of IPM migration completed
    >>>
    The restore log is more than 8Mb in size so I won't upload it unless someone really wants to see it. Here is a snip from the end of it showing no clues I can make sense of:
    INFO: Getting message                                                                                                    
    INFO: Connect the database dsn=ipmdb
    INFO: Connected the Database
    INFO: Command Executed
    INFO: Connecting the Database ipmdb
    INFO: Company=Cisco Systems;Application=NMTG;Signature=010fa55157edb8e14d818eb4fe3db41447146f1571g32125eb777a87cbf8b29a954f559d4221b792ff8
    INFO: Preparing AUTH cmd
    INFO: AUTH Executed
    INFO: AUTH cmd finished
    INFO: Stopping the Database engine ipmdb
    INFO: E:\Sw\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
    INFO: File not exists.[Tue Mar 15 13:17:30 2011] Successfully registered the database with DM
    [Tue Mar 15 13:17:30 2011] Successfully configured IPMDB database !..
    10% of IPM migration completed
    INFO: Start changing password for database 'ipm'...
        Starting database engine ipmEng
    INFO: New userinfo updated into database successfully.
        Stopping database engine ipmEng
    SQL Anywhere Command File Hiding Utility Version 10.0.1.4051
    INFO: Password changed in odbc template file for database 'ipm'.
    INFO: Password changed for ODBC registry 'ipm'.
    INFO: Password changed for Property file E:\Sw\CSCOpx\lib\classpath\com\cisco\nm\cmf\dbservice2\DBServer.properties.
    INFO: Database password successfully changed.
    INFO: Process created
    INFO: Started the Database engine : ipmEng Retry 0
    INFO: Started the Database engine : ipmEng Retry 1
    INFO: Started the Database engine : ipmEng Retry 2
    INFO: Started the Database engine : ipmEng Retry 3
    INFO: Started the Database engine : ipmEng Retry 4
    INFO: Getting message                                                                                                    
    INFO: Connect the database DSN=ipm
    INFO: Connected the Database
    INFO: Command Executed
    INFO: File not exists.[Tue Mar 15 13:18:08 2011] Updated IPM 2.6 DB password into IPM 5.0 DB
    20% of IPM migration completed
    The CiscoWorks Daemon Manager service is starting.
    The CiscoWorks Daemon Manager service was started successfully.
    [Tue Mar 15 13:18:12 2011] Waiting for all daemons to start completely...
    [Tue Mar 15 13:20:12 2011] Successfully stated daemon manager
    30% of IPM migration completed
    [Tue Mar 15 13:20:12 2011] Checking if IPM Process is up and running
    INFO:Daemon Manager is processing other tasks in the queue.Please try again later.
    [Tue Mar 15 13:25:12 2011] Process IPMProcess is not running or never started
    [Tue Mar 15 13:25:12 2011] Will check after 60 seconds
    INFO:Daemon Manager is processing other tasks in the queue.Please try again later.
    [Tue Mar 15 13:31:12 2011] Process IPMProcess is not running or never started
    [Tue Mar 15 13:31:12 2011] Will check after 60 seconds
    [Tue Mar 15 13:34:54 2011] Process IPMProcess is running normally
    [Tue Mar 15 13:34:54 2011] Let's proceed further..
    40% of IPM migration completed
    [Tue Mar 15 13:39:54 2011]  delete flag is  0
    [Tue Mar 15 13:39:54 2011]  Data passed to MigrMain : 2.6 5.0 E:\Sw\CSCOpx E:\Sw\CSCOpx e:\lmsbackup\temp\tempBackupData Migration e:\lmsbackup\temp\tempBackupData 0
    Should I just wait? Is this something that might take days if I've got a lot of IPM data or is it broken? I don't really care about keeping IPM data so could I do something to complete the data migration for everything else? Any advice appreciated.
    regards,
    Aaron

    The restore can take a long time if you have a lot of data.  The problem is the database needs to be completely unloaded and reloaded to convert from ASA 9 to ASA 10.  However, if you do not care about IPM data, and you still have LMS 2.6 running, you can take a new LMS backup not using the wrapper.pl script (this will keep IPM from being backed up).

  • Cisco Prime Infrastructure 2.0 release date

    What is the release date for Cisco Prime Infrastructure ?  What are the improvement from 1.2 to 2.0 ?
    thanks
    Morgan                  

    It's currently due out 31 August 2013.
    I haven't seen the final release notes but it will incorporate a lot of the features currently in LMS 4.2 for wired infrastructure management that are currently missing in PI 1.x.
    I have heard it will not include Topology or template compliance reports and jobs at 2.0 - those features did not make the development cutoff date for 2.0 but they are projected for 2.1.

  • MSI Big Bang XPower II X79 release date

    Whats the release date for this motherboard to the UNITED STATES?
     MSI Big Bang XPower II X79 LGA 2011

     We don't know, we have nothing to do with MSI marketing. We are MSI product users the same as you helping each other with problems and have nothing to do directly with MSI. You would need to ask MSI. Question like that my typical answer is that you will know the release date after you see it for sale in the stores.
      >> How to contact MSI <<
      http://us.msi.com/service/PreSaleForm/
     As a matter of fact if we knew the release dates of products like that we would post it in the forum to avoid those kind of questions all of the time.

  • Why is it that when looking through  new apps in the  apps store on my ipad in release date mode  does it return to the first 1-12 after viewing pparticular apps?

    why is it that when I look through the new apps in the apps store in release date mode it returns to the first page after veiwing more information about some apps, I could be ten to twenty pages in and have it happen.
    Also, I only speak and read English and although there are probably great apps for people from other nations, I don't want to wade through all the apps that I can't make use of. I expect that people of other nationalities or languages don't want to have to wade through every app that they can't make use of, is there not a way that alI users could filter by language?
    I mean no offence to anyone but with a collection of hundreds of thousands of apps in all languages and the jump back to the begining after possibly being into the list by a number of pages I stop looking after awhile and I'm sure I've missed some excellent apps by doing so.

    Contact iTunes support : http://www.apple.com/support/itunes/contact/

  • Standard report with po released date

    hi mm experts,
    request pl let me know is there any standard report which gives the po details and release indicator with released date of po.
    pl help.
    regards
    Srihari

    Hi
    U can get Po release date  per release code, use  CDHDR and CDPOS tables in SE16
    Enter transaction as ME28/ ME29N, Enter the range date,enter the object value as PO number (PO number should be 10 digit if the PO is not 10 digit, then add zero value for the prefix).
    Then you can find the release date
    Rest details u can find from ME2N report i.e Po details and Release indicator using dyanamic selection
    Vishal...

  • Purchase Order released date field and table name

    Hi,
    Please tell me the  Purchase Order released date field and table name.
    Regards
    Deepak

    Hi,
    Table : EKKO.
    Fields : FRGKE,FRGZU.
    You can get release date of PO from CDHDR  table.
    give object value as your po number and check.dont forget to give leading zeros.
    The udate will be date field and transaction will be me29n for relaesed po.

  • Release date and release no of Scheduling Agreement

    Hi All,
    I have a problem with Scheduling agreement.
    I have created a scheduling agreement with long validity period.
    I maintained delivery schedules within that validity period.
    I have generated forecast schedules. then using ME84, creating a releases.
    the problem is occurs here.
    it was not updating the release no and release date for the schedule line.
    still it is showing a *yellow light* .
    where is the problem and why it was not updating.
    and can u please explain the process and significance of those lights.
    Thanks in Advance.
    Regards
    Kishore

    Verify the table T161M has the values
    kvewe = 'B'
    kappl = 'EL'
    druvo = 1
    kschl = LHPA
    as mentioned in the code.
    The solution is add in SPAD the

  • Table for Invoice release date

    Hello,
    Can anyone tell me the table name in which I can get the Invoice release date (Invoice was blocked previously and released with MRBR). I want the date at which it is released through MRBR.
    Thanks,
    Input

    Dear Input_Output,
    When ever we perform LIV and is blocked for payment (due to price variance or other variance) is stored on table RBKP_BLOCKED
    Now when we release it through t. Code MRBR that time its get deleted from RBKP_BLOCKED
    Now to get the date of release Use can Use table CDHDR
    Where OBJECTID =Invoice no+year (e.g 51056066022011 where is 5105606602 invoice no 2011 is year)
    Tcode =MRBR
    You will get the fields called UDATE and UTIME these are your release date and release time
    Hope it clears

  • TAble for PO Release date

    Hi all,
    Plz tell me the table in which i can get PO Release date.
    Best Regards,
    Savita

    Hi Savita,
    The Release dates of the PO are unfortunately not stored in SAP but as stated above you can check the change documents in the follwowing manner:
    Go to CDPOS table with Objectid = <PO Number> and OBJSCTCLASS = EINKBELEG and FNAME = FRGKE and NEW_VALUE = <Final release code> and get the CHANGENR from CDPOS. Then go CDHDR with the CHANGENR and get the update date..

  • Table for PR Release date

    Hi Friends,
    I want to capture the PR release date. But I could not find the table. Can anybody please provide me the table where PR relase date is captured?
    In ME53N, in item detail, in "Quantities/Dates", the release date is not the actual relaease date on which the PR got released. I can see the actual release date in Environment-->Item change. But I could not find the table wheere it stores the actual release date.
    Please suggest.
    Thanks & Regards
    Satya

    Hi,
    As I have explained in my mail, that field is not the actual PR release date. even afterrelease also that field is changeable. System bydefault takes the PR creation date as release date. But If I release after 10 days of PR creation, then EBAN-->FRGDT is not getting updated.
    Please suggest.
    Thanks & Regards
    Satya

  • How can I sort albums in a genre by release date in the itunes store

    How can I sort albums in a genre by release date in the itunes store

    Did you figure this out? Am having the same problem.
    EDIT:
    Found the group in store (in this case Juana Molina) It said music -> alternative
    Changed to column view, and could not find the artist at all in any of the sub categories.
    iTunes is really the biggest pain in the .... and has gotten worse over the years.

  • I purchased an iPad mini on October 10th.  I want to return it and get the new ipad mini retina when it comes out.  How do I do that if the new ipad mini release date isn't until "later in November", which is beyond the 14 days from my purchase date?

    I purchased an iPad mini on October 10th.  I want to return it and get the new ipad mini retina when it comes out. I am currently still within the 14 day return/exchange window but how can I exchange it if the new ipad mini release date isn't until "later in November", which would be beyond the 14 days from my purchase date?  If apple announces a new version of a product you just purchased but won't actually release it for more than 14 days, how can you possibly exchange the one you just bought?  Is my only option to return the one I bought on the 10th (so return by 10/24) and then not have an iPad until the new one is available for purchase?  Or would it make any sense to return the one I bought, get a new one, which would presumably have another 14 day return window, and then exchange THAT one for the new ipad mini w/ retina when it comes out (hopefully within that second 14 day window)?

    Call the apple store you got it from and ask them. Sometimes in the past they've extended the 'no questions asked return' but only Apple can tell you for sure.

  • Why can't I browse by release date in the Albums view?

    I listen to Vocaloid music, specifically Megurine Luka. When I want to check for new releases, I do a search for Megurine Luka. I then click on Albums to see a complete list of every album in which she has at least one song. That works great, but I can't refine the search by release date. I just get a seemingly random list of albums. So, to check for new releases, I have to go through all of them, looking at the release dates. Sometimes the new releases are at the bottom, sometimes in the middle, sometimes near the top. If I had the option to view by release date, it would make that much easier. Is there a way to do this, and I'm just not seeing it?

    Hi dddnlb!
    "Why can't I post a new topic in the Leopard discussions."
    The info posted below is also available in the Announcement How to Post a New Topic
    If you have a Technical question about Apple Hardware, Programs, Services, Technology, Software, Applications, Products, etc, from this page Discussions - Forum Home, select an appropriate Category from one of the sixteen divisions.
    For example, under Mac OS X Related Software, choose the Category Mac OS X v10.5 Leopard.
    On the page that opens, select a Forum, such as Installation & Setup, or Using Mac OS X Leopard.
    Most Category pages, have numerous Forums within them.
    But some may have only one, two, or three.
    For example, the Safari Category page, has three choices listed under Forum / Category:
    Safari For Windows
    Safari for Mac Support forum
    Safari 4 (Beta).
    And the Apple Remote Desktop Category, has only one Apple Remote Desktop Forum.
    From a Category page, select an appropriate Forum to post in.
    On Forum pages, there is an option to Post New Topic.
    More info here How Is Discussions Content Organized?.
    Edit: I have requested that a Host, relocate your Topic to a more appropriate Forum.
    As it will be transferred, it is not necessary for you to repost elsewhere, at this time.
    ali b

Maybe you are looking for

  • Refiners for managed metadata column

    Hi, I have followed the procedure outlined here  to set the search schema for metadata column that I want to show as the refiners:  http://blogs.technet.com/b/sharepoint_made_easy/archive/2013/03/19/step-by-step-configuration-to-add-custom-refiners-i

  • Transferring files from Mac to shared drive shows different sizes?

    I'm currently using a router with DD-WRT to share out media files in my house.  However, it requires NTFS or EXT2/3 which is more difficult to format and will not recognize native formats beyond that.  The current external drive is NTFS. The interest

  • Why did Verizon send me a new Broadband Home Router?

    I recently received an unexpected package from Verizon.  The package contained an Actiontec router and a letter with an inadequate explanation of why the new router is require.  It basically said that my current BHR is no longer compatible with their

  • Mac Pro will not restart after installation of Lion.  Help!

    Mac Pro will not restart after installation of Lion.  Help

  • IPad locked up after trying to update,what do I do?

    I've been geting that notice about updating my iPad,the iSO 4 thing or something.The latest as of 29.05.2011.So I finally decided to give it a chance and selected the "Download and Install" option.Towards the end of the process I got a notice from th