Release date of PO: Is table EREV the right place to look into?
Dear Experts,
I need to determine the final release date of POs. I was going through the threads on this topic and most of the cases I found people have suggested on table CDPOS and CDHDR.
However I found one more table EREV where the release dates are recorded. Will it be the correct approach to refer to this table for determining the release date? Since I haven't worked in MM before I am not sure whether this will be right option. Request your advice..
Snigdho
HI,
yes you can use that table if version management is active at your end.
Regards
Kailas Ugale
Similar Messages
-
Why did I pay $19 for Start Trek Into Darkness pre-order, if Apple KNEW they were going to release a bundle on the release date and I could have got the other Star Trek movie for just $5 more? What the heck Apple, I feel completely ripped off.
I didn't even have time to cancel the preorder as that processed a couple minutes before the bundle was posted.
Pre-orders are apparently not worth my time ever again.Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. Perhaps there will be something they can do for you.
Regards. -
LabView 8 Express Table delete the Right-of-comma positions in the fist row
Hi,
how can I delete the zero in the first row of an express table or delete the Right-of-comma positions?
Kann ich in einer ExpressTabelle in der ersten Spalte (Zeit) die Nachkommastellen (Nullen) löschen?
Thank you
CedricThe zero value in the first row must be part of your data. If so, you will need to remove it before putting the data into the table.
The right-of-comma positions I assume to be the fractional part of the number (comma as decimal separater, right?). If so, you need to set the precision to 0 and it will make the resulting display integer only.
Hope that this helps,
Bob Young
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected] -
The text is in hebrew so the problem is that sometimes the quotation marks not in the right place.
For example i have this text: תווית
על בגד: ''תן לאישה לכבס. זה תפקידה''
This is the source original text you can see the quotations marks and they are not in the right place and all i did is copy paste.
And this is a screenshot of how this text looks like in the website in the original:
You can see now where the quotations marks should be.
Now this is how i'm using the text in my program:
First of all i'm using a webclient to download the page from the website and i'm also encoding it to windows-1255 since it's in hebrew.
using (var webClient = new WebClient())
webClient.Headers.Add("user-agent", "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; .NET CLR 1.0.3705;)");
byte[] myDataBuffer = webClient.DownloadData("http://rotter.net/scoopscache.html");
page = Encoding.GetEncoding("windows-1255").GetString(myDataBuffer);
Then i'm extracting the places i need by reading the html file lines and parsing the right text and it's link.
string loc;
List<string> metas = new List<string>();
List<string> metas1 = new List<string>();
List<string> lockedLinks1 = new List<string>();
string text = "";
string mys = "";
public List<string> LockedThreads(string filename)
lockedThreads = new List<string>();
lockedLinks = new List<string>();
Regex textRegex = new Regex("ToolTip.*?(?=','<)");
string[] fall = File.ReadAllLines(filename);
for (int i = 0; i < fall.Length; i++)
if (fall[i].Contains("http://rotter.net") && fall[i].Contains("locked")||
fall[i].Contains("locked_icon_general") ||
fall[i].Contains("locked_icon_anchor") ||
fall[i].Contains("icon_anchor") ||
fall[i].Contains("locked_icon_fire") ||
fall[i].Contains("locked_icon_sport") ||
fall[i].Contains("locked_icon_camera") ||
fall[i].Contains("locked_icon_movie"))
Regex linkParser = new Regex(@"\b(?:https?://|www\.)\S+\b", RegexOptions.Compiled | RegexOptions.IgnoreCase);
foreach (Match m in linkParser.Matches(fall[i + 2]))
if (m.Value.Contains("><b"))
loc = m.Value.Replace("\"><b", string.Empty);
lockedLinks.Add(loc);
string txt = fall[i - 1];
string text = textRegex.Match(txt).Value.Replace("ToolTip','", String.Empty);
if (text.Contains("’"))
text = text.Replace("’", string.Empty);
lockedThreads.Add(text);
Already here on the List lockedThreads you can see the quotation marks not in the right place as in the original:
After i'm parsing the text and links and adding them to the Lists in another class i'm doing a comparison using this Lists:
foreach (List<string> l_branch in ListsExtractions.responsers)
TreeNode l_node = treeView1.Nodes.Add(l_branch[l_branch.Count - 1]);
if (ListsExtractions.lockedThreads.Contains(l_node.Text))
l_node.ImageIndex = 0;
l_node.SelectedImageIndex = 0;
for (int l_count = 0; l_count < l_branch.Count - 1; l_count++)
TreeNode l_subnode = l_node.Nodes.Add(l_branch[l_count]);
if (ListsExtractions.lockedThreads.Contains(l_subnode.Text))
l_subnode.ImageIndex = 0;
l_subnode.SelectedImageIndex = 0;
The problem is in the line:
if (ListsExtractions.lockedThreads.Contains(l_node.Text))
When it's getting to the line with the quotation marks it's never equal.
Now there are more quotation marks.
In general the problem when comparing both text if it's having quotation marks it's not the same.
So i have two options:
1. To fix it somehow so the quotation marks will be the same in both variables when comparing and also the same like in the original as they show in the html page.
2. To remove the quotation marks from both variables.
What should i do ? And how ? I was prefer to use the original quotation marks like in the original since they have a meaning in the place they should be. The question is how can i do it ?
This is example of the block from the html file where the text with the quotation marks is:
<TD ALIGN="RIGHT" VALIGN="TOP"> <font size=-1 color=#ff9933><b>9418</b></font> </TD></TR><TR BGCOLOR="#eeeeee">
<TD ALIGN="RIGHT" VALIGN="TOP">
<body onmousemove="overhere()">
<a onmouseover="EnterContent('ToolTip','תווית על בגד: ’’תן לאישה לכבס. זה תפקידה’’','<u><span style=color:#000099;>כתב: Spook בתאריך: 08.03.15 שעה: 22:11</span></u><br>מחאת טוויטר קמה בעקבות תוויות שוביניסטיות שהדפיסה חברת אופנה באינדונזיה לפיהן תפקיד הכביסה מוטל על האישה. החברה התנצלה אך כנראה רק עשתה רק יותר נזק לע...'); Activate();" onmouseout="deActivate()" href="javascript:void(0)">
<img src="http://rotter.net/forum/Images/new_locked_icon_general.gif" border="0"></a></TD><TD ALIGN="right" VALIGN="TOP" WIDTH="55%">
<FONT CLASS='text15bn'><FONT FACE="Arial">
<a href="http://rotter.net/cgi-bin/forum/dcboard.cgi?az=read_count&om=189696&forum=scoops1"><b>
<font color="898A8E">תווית על בגד: ''תן לאישה לכבס. זה תפקידה''</b>
</a></font></TD>Ok, it is unclear on what is happening here.
Are you saying that when the webclient gets the data that it is not honoring the quote characters? Or the processing of the data buffer is causing issues?
This is what I see the of your example text which is trying to be parse out:
<a onmouseover="EnterContent('ToolTip','תווית על בגד: ’’תן לאישה לכבס. זה תפקידה’’','<u><span style=color:#000099;>כתב: Spook בתאריך: 08.03.15 שעה: 22:11</span></u><br>מחאת טוויטר קמה בעקבות תוויות שוביניסטיות שהדפיסה חברת אופנה באינדונזיה לפיהן תפקיד הכביסה מוטל על האישה. החברה התנצלה אך כנראה רק עשתה רק יותר נזק לע...'); Activate();">";
It appears to me that the escapes `’` does not have matching `“` anywhere within the tooltip. So it appears that the page properly places left quotes in when processing the page, but the raw html has broken text.
Hence a garbage in, garbage out situation.
William Wegerson (www.OmegaCoder.Com) -
I know a lot of people are unhappy with Apple but, is this forum the right place to complain?
If YOU are upset you will be interested in this from MacFixIt...
http://www.macfixit.com/article.php?story=20071003074612266
..."the way to catch Apple's ear is through its official feedback forms. A polite, clear, terse, factual, well-documented note is best. You don't need to communicate your anger and frustration; if enough people give feedback, Apple will get the message clearly through sheer numbers."With the release of the V2.0.2 update I have actually managed to build and publish websites for the first time since the introduction of iWeb '08. As far as I am concerned iWeb is working again.
A fair portion of the angry comments posted here are directed at .Mac and not iWeb.
I know that iWeb and .Mac are "joined at the hip" - at least that's what Apple wants us to think - but I shouldn't imagine anybody would say that publishing to the Apple server is the best way.
If you depend on your iWeb built site(s) for business purposes you would be ill advised to use .Mac.
I only use .Mac for trial sites and, so far, I haven't had any problems except from suffering from this server's notorious unreliability.
I was the "one reader" quoted in the MacFixIt post...
"One reader writes: "I'm glad I don't work on the iWeb development team!" One wonders, rather, whether anyone is working on the iWeb development team."
I do know that the iWeb development team are working on the bugs - I don't know about the .Mac guys! -
Not sure if this is the right place...Recovery or Finding missing files
Hi,
Again, not sure if this is the right place to ask, but its worth a shot.
so i've been transcribing video all day using microsoft office for mac, and was saving the project (i thought) to an external hard drive. at one point the HD came unplugged, and i plugged it back in. no big deal. i continued to save, to type, save, type, etc until finished. so when i finished and saved the project, seemed okay. when i closed word, it kept asking me if i wanted to save changes...i said yes, and it would just ask me again, did this a few times. i assumed it was asking me to save it to a new location, which i didn't think i needed so finally said no.
i then find out that somehow when the HD was unplugged it erased Words ability to save to said location. so my last save was really before the HD was removed, which is odd, because i kept saving and never was prompted the path was interrupted or anything.
so my question is two part...
1. where would i find in the depths of the computer the saved files? if i was saving, they had to have gone somewhere, but i dont know how to find them.
2. also, assuming it wasnt saving, my word prefs say it autosaves every 5 minutes, so those files must exist somewhere also, yet can't find them...
does this make sense, can anyone help me?
thanks
austinHi there,
In Finder, select Go menu>Go to Folder, and go to "/volumes".
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists.
See if it may be in one of those with a 1 or 2 added to it. -
I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email. Now it won't let me do that and it syncs all my inbox. How can I change it back to sync less. I can't find the right place.
I understand, as that was the place I would change it before 8.3 but now that option of Mail Days to Sync is not available? Any idea why that would be?
-
Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!
Have you checked out the topics at the right in the More Like This section?
OT -
My (old, never updated) I-phone has no "update" button in Settings and I would like to update it. I can not find the right place on I-Tunes to download the updates. Do you know where to look?
Update your iPhone, iPad, or iPod touch - Support - Apple
-
Slideshow-Images not displaying in the right place on the screen
I am trying to use the SlideShow widget for the first time. I have a pretty basic slideshow with six images that I want to display. When I preview it in IE or Firefox,what I get is really weird. The first image displays in the right place. The second displays in the right place, but with a black box underneath it. The third displays under where it's supposed to go, with a black box above it. After this, the images alternate between where they're supposed to be and just below that, with a black box of the same size in the second location. I've looked at the source of other webpages that have working slide shows, and I don't see a difference between what I'm doing and what they're doing. Here is what I think is the relevant code. Can anyone suggest a way to fix this?
<script src="Spry-UI-1.7/includes/SpryDOMUtils.js" type="text/javascript"></script>
<script src="Spry-UI-1.7/includes/SpryDOMEffects.js" type="text/javascript"></script>
<script src="Spry-UI-1.7/includes/SpryWidget.js" type="text/javascript"></script>
<script src="Spry-UI-1.7/includes/SpryPanelSelector.js" type="text/javascript"></script>
<script src="Spry-UI-1.7/includes/SpryPanelSet.js" type="text/javascript"></script>
<script src="Spry-UI-1.7/includes/SpryFadingPanels.js" type="text/javascript"></script>
<script src="Spry-UI-1.7/includes/SprySliderPanels.js" type="text/javascript"></script>
<script src="Spry-UI-1.7/includes/SpryFilmStrip.js" type="text/javascript"></script>
<script src="Spry-UI-1.7/includes/SpryImageLoader.js" type="text/javascript"></script>
<script src="Spry-UI-1.7/includes/SpryImageSlideShow.js" type="text/javascript"></script>
<script src="Spry-UI-1.7/includes/plugins/ImageSlideShow/SpryThumbnailFilmStripPlugin.js" type="text/javascript"></script>
<script src="Spry-UI-1.7/includes/plugins/ImageSlideShow/SpryTitleSliderPlugin.js" type="text/javascript"></script>
<script src="Spry-UI-1.7/includes/plugins/ImageSlideShow/SpryPanAndZoomPlugin.js" type="text/javascript"></script>
<script type="text/javascript">
var _gaq = _gaq || [];
_gaq.push(['_setAccount', 'UA-81003-5']);
_gaq.push(['_trackPageview']);
(function() {
var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
</script>
</style>
<link href="Spry-UI-1.7/css/ImageSlideShow/basicFS/basic_fs.css" rel="stylesheet" type="text/css" />
<style type="text/css">
/* BeginOAWidget_Instance_2141543: #ImageSlideShow */
#ImageSlideShow {
width: 426px;
height: 303px;
border: solid 1px #000000;
background-color: #717c96;
#ImageSlideShow .ISSClip {
background-color: #000000;
/* EndOAWidget_Instance_2141543 */
</style>
<script type="text/xml">
<!--
<oa:widgets>
<oa:widget wid="2141543" binding="#ImageSlideShow" />
</oa:widgets>
-->
<div class="column2">
<div id="thumb">
<div>
<ul id="ImageSlideShow" title="">
<li><a href="images/balloon1a.jpg"><img src="images/baloon1a.jpg" alt="" /></a></li>
<li><a href="images/balloon2a.jpg"><img src="images/baloon2a.jpg" alt="" /></a></li>
<li><a href="images/balloon3a.jpg"><img src="images/baloon3a.jpg" alt="" /></a></li>
<li><a href="images/balloon4a.jpg"><img src="images/baloon4a.jpg" alt="" /></a></li>
<li><a href="images/balloon5a.jpg"><img src="images/baloon5a.jpg" alt="" /></a></li>
<li><a href="images/balloon6a.jpg"><img src="images/baloon6a.jpg" alt="" /></a></li>
</ul>
<script type="text/javascript">
// BeginOAWidget_Instance_2141543: #ImageSlideShow
var ImageSlideShow = new Spry.Widget.ImageSlideShow("#ImageSlideShow", {
widgetID: "ImageSlideShow",
injectionType: "replace",
autoPlay: true,
displayInterval: 8000,
transitionDuration: 2000,
componentOrder: ["view"]
// EndOAWidget_Instance_2141543
</script>
<h3 align="center"><br />A Different Way of Thinking</h3></div>
</div>
</div>If you have a look at basic_fs.css, you will notice that the styles taget a class called BasicSlideShowFS.
Yet when I look at the constructor, the class is missing as in
var ImageSlideShow = new Spry.Widget.ImageSlideShow("#ImageSlideShow", {
widgetID: "ImageSlideShow",
widgetClass: "BasicSlideShowFS",
injectionType: "replace",
autoPlay: true,
Because you are not using the thumbnails (filmstrip), I am wondering why you did not implement the basic slideshow, which will make it a lot easier for you.
Gramps -
I have scroll text box that is placed in a section of the page, It is in the right place on IE, Chrome, Safari, But not in Firefox?
Can anybody tell me why and how I can fix it. The page is baystatewiring.com/blog.htmlYou need to make the text box float left.
-
wow wrote that in the wrong place. First time using this forum thing. Question is still the same. I don't think I'm looking in the right place. It says, "Please contact iTunes support to complete this transaction". The reason it came up is because I added a credit card to my account. Do I have to just reset my password completely and all my security info and re-enter it?
Have you considered doing exatly what it says and contacting itunes support?
-
my audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic
any help please im going out my mind
regards jamesThanks for getting back to me, The AU manger was there, just when you treid to click on it, it just wasn't responding.
But i had a scan thourgh google and found the answer, i removed the audio units cache and restarted it and all was good. I was really starting to get stressed over the matter but however i got to the bottom of it.
Again thanks for replying
Regards James -
Put the right sign in the right place
I'm not even sure if Captivate 4 can do this, but I want to have quiz that gets the students to put the right sign in the right place. i.e. a hard hat sign on a photo of a building site. Student would have a list of sign images and it would be a case of dragging and dropping the correct sign in the correct place on the photo.
ThanksHi there
Presently I can see two possibilities here.
1. Use a Matching Question. While you may not use a drag and drop, you could accomplish the goal by listing two columns and establishing the matches.
2. Use a Hotspot Question. In this case it still won't be a drag and drop. But you could insert an image of the sign, then have a hot area where it would logically go. The user would click the area to choose it.
Perhaps one of our resident Widget Wizards has a solution in the form of a widget you could acquire and use.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks -
I have bought a new iPad 2 charger and it works absolutely fine but then I wanted to upload some pictures on the computer so I put the wire in the right places but it doesn't work so I tried my iPhone and it worked fine?
Plz answer as soon as possible
Maybe you are looking for
-
CRMXIF_ORDER_SAVE: Condition values do not get updated
Hi, I am trying to change the value of a condition record on a contract using APPL_IDOC_INPUTM (IDOC Type APPL_IDOC_INPUTM; Message Type CRMXIF_ORDER_SAVE_M; Function CRMXIF_ORDER_SAVE). I pass 'U' to the Object_task and populate the new rate in the
-
"DR8 has encountered a problem and needs to close"
I've just installed DR8 and receive "Dreamweaver 8 has encountered a problem and needs to close" everytime I try to access the windows HELP menu items DR Help or Getting Started with Dreamweaver. Re-installation doesn't help. I had previously downloa
-
I have created a flash animation using Flash CS4 that takes advantage of the new 3d tools.... www.chriswootton.com I have had two site visitors report that they could only see the top half of the animation (logo header and menu). They were both using
-
Urgent :: FRM-40654 || pls help me out
Hello forum Pls i need an immediate help. so suggestions invited... i have a block having 1 db item and 1 non db item . i m shoving LOV for filling those.. these 2 are displayed multiple times on the canvas. i want that whn user select one from LOV t
-
Mozilla-firefox start home pages on tabs
this isn't really a problem. i heard someone open up more than one home page on multiple tabs while starting mozilla-firefox. just wanting to find how this is done? thx slyski