Release key for TCNC codec software

Hello!
My question is very simple )
As far as I know, Release keys for TC and TCNC Cisco codec software are different. It's not possible to activate, e.q. TC software with "TCNC" Release key and vice versa. My codec uses TCNC software, but it's not up to date. If I want to upgrade it to the latest software release - how can I get correct Release key?
I don't see any possibility to choose something like TCNC5.1.1 in the list of available releases in online tool (Tandberg Software -> Get new Release Key), all releases in the list are something like TCX.

Short comment. The TCNC software is not about "I do not need encryption", it is about, the country you are in if you are allowed to use encryption software, or better if Cisco is allowed to export software using encryption there.
So as long as you or your system is not under these requirements simply use the TC software and if you do not need encryption simply do not use or disable it.

Similar Messages

Error in setting release key for a change number

When i am giving release key in CC02 01(Global Release) system is giving me message It can not be released for production
when i analysed i found the following details
ECO PP0000000029 cannot be released for production
Message no. CC251
Diagnosis
You want to set a release key for an ECO and it has been defined as globally released.
System Response
The system checks the system status of the ECO. You can only set the release key if the ECO released system status is set for the ECO.
Procedure
Check the system status of the ECO (in the change header).
If required, set the system status to ECO released.
If you cannot yet set this system status for the ECO, you first have to process the system status of the allocated change objects.
What is the reason for that.What i need to resolve that with exact steps.

Hello Cha,
Kindly open this custom table using SM30 and try creating a transport request from there.
Regards
Vivek

Question about activation key for pre-installed software after hard drive failure.

I had a hard drive failure on my MacBook Pro last week and had it replaced by Apple. When I restored my computer with a Time Machine backup, Office 2011 wants an activation key to start up again. Problem is, I had Office pre-installed when I bought my MacBook by Apple. Where do I get the activation key to get it working again?
Thanks
Q

Do you still have the signons.sqlite and key3.db files from the IT setup?
You can find the sync account password and the sync (recovery) key in the password manager on computers where a sync account with a specific e-mail address has been set up.
Look for:
* chrome://weave (Mozilla Services Password)
* chrome://weave (Mozilla Services Encryption Passphrase)

Release dates for various universal software and games????

Hi everyone. I am totally new to Apple, infact a week ago I took the plunge from PC to Mac and ordered a Imac G5. Luckily Apple contacted me before it was shipped a offered me the the new system, which I gladly took.
My question is should I wait until the new universal editions of the programs and games are released or will I not even notice a difference using the older editions through Rosetta? Does anyone know when the universal editions of many popular programs and games should start to appear?
Thanks
Leecho

It's the old name for what we now know as RoboHelp (as opposed to TCS). At that time I think it included the bits we get now but then could be purchased separately. Rick will probably recall that better.
I don't have release dates but there is no expiry date as such. Support is only available for the current and previous versions. Beyond that they just keep running. X4 (12) and X5 (13) are problematic in that they require activation and can no longer be activated. For X5 there is a download to get around that. For X4 you are plain out of luck.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Release key

Hi
I have a release key for tcnc6.3.1 now i want to upgrade to tc6.3.1.
How to get the release key for tc 6.3.1 and will i get it free?
"This was originaly posted as a blog which was deleted"

What George has posted is slightly wrong. While software versions from TC6.1 onwards no longer require a specific release key, a device still needs to have a valid release key installed (for an one of the releases of software), and that key needs to be from the same software train (ie TC or TCNC) as the software you are installing.
Doing a search in these forums shows this question, or similar, has been asked a number of times before where the answer is:
If you have an active service contract on your device, you should contact Cisco TAC with your Endpoint Serial Number and service contract information and they will be able to assist in converting you from a TCNC to a TC licence/release key (assuming you're in a country that the TC software is allowed in).
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Activating ObjectKey's in change master with Release Key.

Hello Gurus,
I would like if SAP has come up with any solution for activating Object key for other objects apart from the standard BOM along with the release key.
Scenario:
I want my Engineering Record to create a change master with the Release key and use same the change master for making changes to Documents along with BOM. There is an OSS note 1767458 - WebUI: Object category enhancement for packages, release key for PLMWUI 746 and not for later versions of PLMWUI ( PLMUI 747).
Kindly advice.
Thanks & Regards
Jo

Dear,
You can create a change master using t-code CC01 and you can maintain and you can maintain the revision level in the objects. Then using this change master you can change the material master . Then automatically the system will create a new revision level.
Using T code CC11 - Create Revision Level ,we can maintain the revision levels.
One more way of doing this is ,using MM02 T code,after going into Basic 1
view,just below the material field,you can find the creation button for revision level
You can come to CC02 T code enter the change number set the Release key values as 01.
Hope clear to you.
Regards,
R.Brahmankar

How to setup MM costing and drive for new parts before ECM release key is triggered?

Hi,
I am on the engineering side of SAP ERP where I create new materials, BOMs, etc. We do this with a change master without release key today. We are switching to a more controlled/managed process for engineering changes where we will use change masters with a release key and approval workflows for these tasks (ECM). The problem we are seeing is that the supply chain side of the business is not able to perform their tasks of costing materials and driving for new parts until the ECM workflows are complete, release key is active, and the changes are valid for production. There must be a way for supply chain to perform these tasks beforehand, so that when the release key becomes active, material costing is complete, new materials are already on hand (or at least been ordered), so that the process of procurement/production orders are not delayed. Can you point me to documentation that provides an overview, or summarizes what the best practices are for our supply chain when we start working with ECM release keys?
Thanks,
Joseph

the release key allows you to release the change for specific business functions. Please look at the options available in release key configuration. You will need multiple release keys to bring the changes in a more controlled manner.

I need to download All Hyperion v 7 software and a temp lic key for Essbase

I need to download All Hyperion v 7 software and a temp lic key for Essbase
Where can I download All Hyperion v 7 software and a temp lic key for Essbase?

e-delivery

Registration key required for database 10g software

receive a password and message "Thank you for registering", but never get the key necessary to install software on disk that came with textbook--very frustrating

You can download and install Oracle Database 10g free (for personal/development use) from OTN, with no registration key required:
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
(I recommend Express Edition)
Cheers, OTN

Field Selection Key In Release Indicator For PR

Hi,
Can you explain what is the use of Field Selection Key in Release indicator for PR on what basis to select this value.
regards,
zafar

Hi
Field selection key directs which values can be changed after the relevant release indicators have been set
Eg suppose you want to supress the field for PR after first release indicator has been set you have to assign the relevant field selection key to Release indicator
you can assign the same to the release indicators in
spro-mm-Purchasing -PR-Procedure with classification-set up Procedure with classification-release indicators
you can set the field selection key in
spro-mm-purchasing -PR- define screen layout at document level
Regards
Sandeep

How to make field key for user fields cant be changed after project release

Dear Expert,
How can we make field key for user fields cannot be changed once we release the project/wbs?
Cheers,
Nies

Do you mean 'field key' in the project profile in SPRo?
I think after a project is created a change in the field key wont affect the fields in CJ20N..
Can you verify?
Regards
Ramesh

C5 Release notes for Phone software update?

I see the new "important" Phone software update available on the C5. Where can we see the release notes for this update? Thanks

There might be a dozen or so different product codes for the same phone model - different operator models carry different firmware and has a unique product code.
You will not get the update for your phone until the operator says yes to it. How long does it take? It depends on the operator, but it might take from a few days to a few weeks. If you want to be sure when an update is available, sign up for the email notification.
Link (Register now, etc...)
Nokia Lumia 520 3046.0000.1329.2001 RM-914
Nokia Asha 302 V15.09 22-05-13 RM-813

Unable ot activate ECM for Master Recip - Scenario - ECR with Release Key.

Dear Friends,
We want to activate ECM for Material BOM as well as Master Recipe.
Scenario : ECR with Release Key.
We are able to activate for BOM only.
In object Screen, Master Recipe iline item is greyed out.
System : ECC 6.0 - Ehp4
Please guide.
With best Regards,
Raghu Sharma.

Hello Raghu,
It is standard SAP behaviour that ECR/ECM with release key certain items will be greyed out. So try without release key. There is a SAP note"159414" to modify this behavior.
Regards
Prasad K
Edited by: Prasad K on Jul 7, 2010 4:31 AM
Edited by: Prasad K on Jul 7, 2010 4:32 AM

License key for software installation

I can not find my license key for the new hp deskjet 1010 printer that I bought and I have the disc that came with the printer but my laptop does not have a place to put a disc in for installation so I tried to download the installation info for my printer from the internet and I keep getting ask for my licensing key number but I dont know where to find this info. Please advise.

Hi, Which license key are you talking about ? hp deskjet 1010 printer does not require license key to install. Please use the CD which came with the peinter. Regards.

Command Key has to be released and pressed each time, holding down command key for multiple commands ignoring all after first keystroke. Have tried this in safe mode - still broken.

This problem has just cropped up - pretty sure it's after the 10.7.3 upgrade.
Scenario: I'm in pages and I'm doing a search. I need to find multiple instances of my search word.
I hold down the command key and press the 'g' key - for find again. It works.
While still holding down the command key - I hit the 'g' key again to do another find again. But instead of executing teh find again, hitting teh 'g' key the sdecond time types "g' over last search item found, acting as if teh command key was not still pessed.
This is happening in DreamWeaver CS5.5, the latest Pages, and the latest BBEdit. Haven't checked all apps.
This IS NOT a problem in the finder though - where command-tabbing brings up the app list properly, and tabs through while holding down teh command key and repeatedly hitting the tab key.
I restarted in safe mode. Still a problem.
First I cleaned the command key, then re-seating the key. I swapped keyboards, Still a problem.
Did a PRAM reset, which didn't fix anything.
I can't find any other post regarding this issue. Been using the mac for over 25 years and I've never seen this one.

This turns out to be a problem with my KVM switcher. The USB port on the switcher for the keyboard is failing - hence the intermittent reaction to the command-key presses.
I connected the keyboard directly to my mac and the problem was resolved - sorry I didn't check that before I posted this.

Release key for TCNC codec software

Similar Messages

Maybe you are looking for