Release-Notes Netweaver04 BW 3.5 Support Package 14 - highest

Hi folks,
Need your help. We plan to move to the highest support package in SAP BW 3.5. At the moment, we have support package 14.
Could someone tell me which the essential modifications are between SP 14 and the newest?
Where can i find the release notes?
thx
pascal

Hi Pascal,
I have sent you a document regarding the SAP NetWeaver 04 Support Package Stack 15 and Higher to your mail id <b>[email protected]</b>.
check out the document.
Assign points if it is helpful.
Regards,
Sreedhar

Similar Messages

Customer exit is not functioning after ECC upgrade/support package

It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
COZF0002 Change purchase req. for externally procured component
EXIT_SAPLCOZF_002
INCLUDE ZXCOZU02
*& Include           ZXCOZU02
CONSTANTS: lcc_eban(25)   TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban>   TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
    SELECT SINGLE fkstl INTO l_fkstl FROM prps
      WHERE pspnr = caufvd_imp-pspel.
    IF ( sy-subrc = 0 ).
      WRITE l_fkstl TO <fs_eban>-zzfistl.
    ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
    WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
*& Include ZXCOZU02
CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban> TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
SELECT SINGLE fkstl INTO l_fkstl FROM prps
WHERE pspnr = caufvd_imp-pspel.
IF ( sy-subrc = 0 ).
WRITE l_fkstl TO <fs_eban>-zzfistl.
ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

OSS Note deimplemented and included in Support Package

Hi,
We have deimplemented note in version 2, because version 3 was not possible to be implemented in SNOTE.
Now it is deimplemented at all, and when I try to implement latest version of the note, I get the message
SAP Note already implemented by Support Package
How can I implement this note now? I checked the objects in the system and the note is not implemented.

Note number 1581093.
As mentioned in the symptom. Version 2 of the note is created to extend the functionality provided in the Version 1. Version 3 of the note is created to correct the error in Version 2.
Information from SPAM
SAP_HR 600 0054 SAPKE60054 Human Resources
How can I find the information required if neeed?
WHen I try to reset the implementation I get the message
No correction instructions implemented for SAP
Note 0001581093
Edited by: Wojciech Walczak ITMAXI.COM on May 25, 2011 12:00 PM

Addon manager in not working for fennec alpha3 or beta. Release notes say that AMO is supported

if i try to search for any addon in the addon manager, it says "unable to retrieve addon"

Fennec 1.0 alpha 3 was released over a year ago and is not currently a supported version. If you are using Fennec 1.0 alpha for Windows Mobile, we are sorry but we are no longer developing or supporting Fennec for Windows Mobile phones.
If you are using Fennec on Maemo or Android, or on a desktop computer, please upgrade to the latest release (4.0 beta 1): http://www.mozilla.com/mobile/download/

Difference between SAP support releases and SAP support package stacks ?

Hi,
Lets take SAP R3 Enterprise 47x200 (my company) as an example.
Looks like there is SAP R3 Enterprise 47x200 release (from release notes) and SAP R3 Enterprise 47x200 SR1 (support release 1).
And there are support package stacks for this release.
What are the differences/similarities between these two ?
Where can I find some document which explains these things as a whole ?
There is enchancement packages introduced in SAP ERP 6.0, how EHP's relate to those two above ?
thanks
Vilius

Hi
Check this link [https://websmp101.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=DISP_NEW&00200682500000002804=01200615320900001087]
For informations on EHP check this [www.service.sap.com/erp-ehp]
Regards
Uday

Applying BASIS support package 14 on IDES (DB2 & Windows)

Hi all,
   I am trying to apply BASIS support package on IDES. Currently process is running on IMPORT 2 step. I run in diaglog and it was continuously showing MOVE NAMETABS at the end. and in ST22 I see thousands of dumps being generated and almost all are related to    SYNTAX_ERROR
Short text
    Syntax error in program "SAPLSALC ".
at happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSALI" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLSALC " in include "LSALCU65
   " in
line 1:
"Function "SALC_INFO_GET_TREE" not found in Function Library."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLSALI" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Can anyone of you help me on this issue.
AWAITING REPLY
Thanks

>    I am trying to apply BASIS support package on IDES. Currently process is running on IMPORT 2 step. I run in diaglog and it was continuously showing MOVE NAMETABS at the end. and in ST22 I see thousands of dumps being generated and almost all are related to    SYNTAX_ERROR
There are a few known issues with KB70014, those are documented in
Note 822379 - Known problems with Support Packages in SAP NW 7.0x AS ABAP
Markus

Download of ABAP Support Packages for SAP Netweaver PI 7.1

Hello all,
I'm just working on upgrade SAP Netweaver PI 7.0 to PI 7.1 and we have no functional connection to SAP OSS and therefore I'm not able to aprove some Support Packages via Solution Manager.
PLEASE - Can somebody download the following Support Packages and copy it via ftp:
BW Support Package 06 for 7.10 - SAPKW71006
BW Support Package 05 for 7.10 - SAPKW71005
Basis Support Package 06 for 7.10 - SAPKB71006
Basis Support Package 05 for 7.10 - SAPKB71005
ABA Support Package 06 for 7.10 - SAPKA71006
ABA Support Package 05 for 7.10 - SAPKA71005
PI_BASIS 2006_1_710: patch 0006 - SAPKIPYN06
PI_BASIS 2006_1_710: patch 0005 - SAPKIPYN05
FTP data:
server: ftp.vse.sk
username: sap
password: Supp0rtpack
Thanks for your time and help.
Best regards,
Slavomir Kysel.

Solved by SAP Walldorf.

Official Support from SAP on Support package levels

I have NW7 Dual stack system. Currently at SP10
Looking for an "official Policy" on supported SP levels from SAP, if it exists already. Please help me by providing a link that information or a document if it exists.
We are working on an ongoing infrastructure support policy for this installation.
Thanks in advance.
Vasu

You can run a certain level of support packages as long as you can live with the "deficiencies" resulting out of that. You can run on the initial installed level if you can deal with the fact, that you will need to apply a LOT of notes in case you run into an error (because of dependent notes because of the low support package level).
There may also be cases where it´s impossible to provide a correction by note (e. g. table changes) and where corrections can only be delivered by support packages.
Last but not least the law may force you to install a certain level (e. g. fiscal year change) to get the newest (and correct) data out of the system for all kinds of changes that may be necessary to comply the law.
Basically you can leave your system on a certain support package as long as you wish but it may become difficult or even impossible to give you a solution if more than an ABAP code correction is necessary.
This is especially true on dual stack systems where a change in the portal may force you to upgrade your complete backend to a certain level because there the ABAP + Java stack must be in sync --> one of the reasons why we totally avoid dual stack installations.
Markus

Support package stacks: Do we need to import all SP in the stack?

Hi all.
We are about to import Support Package Stack 13 into our ERP 6.0 system. The SPS includes a lot of support packages for software components such as IS-OIL, IS-UT and other IS-* components.
These components are inactive in our system, and are not used. However, I know that the recommendation is to import the complete stack.
I am therefore having some doubts if it is wise to import the IS-* related support packages.
Please advise.
Regards,
Thomas

Thank you for your feedback.
However, I would like to ask if the only argument is to follow SAP recommendation? What risks are we running if we do not implement the IS component support packages?
As the IS-* components are not active, I don't see how not importing these support packages will cause "inconsistence" in the system. Also, it would reduce the total number of support packages that needs to be included.
I am generally positive to following SAP's recommendations, but in this case we are are in a situation where we need to lift the SAP system from SPS 8 to SPS 13 in one operation. That includes a massive amount of support packages, and possibly a lot more time than the timeframe we have available.
Regards,
Thomas

SAP Support Package 8.0

Hi
I know cProjects support package 8.0 is scheduled in April 2007. Has anyone aware of the status whether the support package is released
with regards,
Ramakrishna

Hi Ramakrishna,
the support package 8 is available on the SAP Service Marketplace under http://service.sap.com.
Best regards,
Christoph

Solution Manager Support Package Release Notes?

Hello,
I'm looking for release notes for all support packages of the solution manager 4.0.
I would like to read, which changes in which support Package were made.
Could you help me?
regards Christian

Hello Cristian,
If you are interested in what is contained in the respective support packages functional-wise, you may check this SAP Service Marketplace site:
<a href="http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&">http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&</a>
Search for respective support package, such as "4.0 Support Package Stack 12" - which currently is the latest one:
<a href="http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700000478802007E">http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700000478802007E</a>
or the previous ones named:
"4.0 Support Package Stack 9" and
"4.0 Support Package Stack 6"
I hope this helps you in finding the information you are looking for.
Best regards,
Doreen

ADS Support Package Release Note

Hi Team,
We are deploying SP21 in our ADS system.
So wondering how do i find the ADS specific SP21 release note to understand the corrections/recommendations along with this Support Package 21 release.
Regards
sekhar

Hello,
ADS is a product of Adobe. SAP can not deliver to you a list of fixes for the releases.
Best regards,
Dezso

Release BI 7.0 front-end add-on for SAP GUI 7.10, Support Package 700

Hi guys,
In SAP note 1238872 the release of new support package has been mentioned (Quote: "Download the BI 7.0 front-end add-on for SAP GUI 7.10, Support Package 700 from the SAP Service Marketplace.")
So, can someone tell me, when this Support Package will be released?
(At the moment the last version provided in download area is 6.02)
Kind regards
Markus

Thanks, but my question was not how can I workaround, cause I was able to read that note. (Unfortunatly the workaround solves the problem for the query designer only and the error still persists when executing the query)
However, can some one please tell me, when the Support Package 7.00 will be released?

Objects for deletion included in support package are not deleted

Hi experts,
How can i create a support package using Add-on Assembly Kit that deletes several objects?
This is the case:
We have DEV, QA and PROD systems. The objects are deleted on DEV and the transports are released. The transports are automatically imported on QA and the objects are deleted -checked they are gone. A support package of the product is created on QA including the transports that delete the objects. The SP is released successfully and imported on PROD successfully. The objects that should be deleted still exist on PROD. I've checked the logs for errors - no errors found.
Do you have any idea what could be the reason?
Best regards,
Petar

Note number 1581093.
As mentioned in the symptom. Version 2 of the note is created to extend the functionality provided in the Version 1. Version 3 of the note is created to correct the error in Version 2.
Information from SPAM
SAP_HR 600 0054 SAPKE60054 Human Resources
How can I find the information required if neeed?
WHen I try to reset the implementation I get the message
No correction instructions implemented for SAP
Note 0001581093
Edited by: Wojciech Walczak ITMAXI.COM on May 25, 2011 12:00 PM

Service Release (SR) - which Support Package Levels?

Hello,
I have a general question in terms of Service Releases of a SAP solution:
Is there an easy way to find out on which Support Package Level (or Support Package Stack) a Service Release (SR) of a SAP Solution (or NetWeaver itself) is based?
Can I get this information in the SAP Service Marketplace?
Example: mySAP <solution> SR1 is based on Support Package Level <nn> of component <comp1> and Support Package Level <nn> of component <comp2>.
Any hint is appriciated.
Thanks!
Heiko

Hi Heiko,
You can find information on the SPS and SR releases/version in the service
market place under NW2004S - Release Specific Information - Support Package
Stacks information. This page will tell you the following;
SPS 11 Calender Week 10, 2007 (delayed) expand/hide
Support Package Stack 11 was planned for calendar week 06 and is postponed until calendar week 10.
Planned Features
Please take a look at this preliminary list with the new features planned for Support Package Stack 11.
SPS 10 November 27th, 2006 expand/hide
Download
Download SP Stack 10
Information sources
SP Stack Guide 10
Release Notes SP Stack 10
SR2 December 4th, 2006 expand/hide
SAP NetWeaver 2004s Support Release 2 (SR2) is a new installation and upgrade version (a new set of DVDs) including corrections (and features) provided with SP Stacks 01 to 09. It is a significant step towards a simpler installation of SAP NetWeaver 2004s up to and including SP Stack 09.
Since SAP NetWeaver 2004s SR2 is based on SP Stack 09 the next SP stack to be applied will be SP Stack 10.
Support Release 2 was planned for calendar week 47 and is postsponed until calendar week 49.
SPS 09 September 5th, 2006 expand/hide
Download
Download SP Stack 09
Information sources
SP Stack Guide 09
Release Notes SP Stack 09
SPS 08 June 27th, 2006 expand/hide
Download
Download SP Stack 08
Information sources
SP Stack Guide 08
Documentation Patches -> SPS 08.
Release Notes SP Stack 08
SPS 07 April 11th, 2006 expand/hide
Download
Download SP Stack 07
Information sources
SP Stack Guide 07
Documentation Patches -> SPS 07.
Release Notes SP Stack 07
SR 1 April 7 th, 2006 expand/hide
SAP NetWeaver 2004s Support Release 1 (SR1) is a new installation and upgrade version (a new set of DVDs) including corrections (and features) provided with SP Stacks 01 to 06. It is a significant step towards a simpler installation of SAP NetWeaver 2004s up to and including SP Stack 06.
Since SAP NetWeaver 2004s SR1 is based on SP Stack 06 the next SP stack to be applied will be SP Stack 07.
Shipment
Please note that since the release of SAP NetWeaver 2004s SR 1 on April 7, 2006, SAP NetWeaver stand-alone customers who order SAP NetWeaver 2004s now receive the SAP NetWeaver 2004s SR1 software package instead. SAP NetWeaver 2004s SR1 will not automatically be shipped to customers who have already received SAP NetWeaver 2004s prior to this date.
SPS 06 Jan 31st, 2006 expand/hide
Download
Download SP Stack 06
Information sources
SP Stack Guide 06
Documentation Patches -> SPS 06.
Release Notes SP Stack 06
SPS 05 Dec 15th, 2005 expand/hide
Java part of Support Package Stack 05 was postsponed to December 15th.
Download
Download SP Stack 05
Information sources
SP Stack Guide 05
Documentation Patches -> SPS 05.
Release Notes SP Stack 05
The interesting bit is that SR1 was released in April; while SPS6 was available in
January. The same goes for SR2; released in December; while SPS9 was
available in September.
There is a gap of 3 months between the SPS was released and the SR is released
I assume that patches that have been released for the SPS are included in the SR
therefor a system that has SPS6 or SPS9 applied is not neccisarily the same as
SR1 or SR2.
Hope this helps...
Kind regards,
Walter

Release-Notes Netweaver04 BW 3.5 Support Package 14 - highest

Similar Messages

Maybe you are looking for