Release object / release class

Hello Sapians....
I am trying to creat new class and assign it to new Rel Grp. but I am facing this error and does not let me save.. Please guide wht is the solution..
*Please check release classes (see long text)*
                                                                                *Message no. ME492*
                                                                                *Diagnosis*
                                                                                *Here you can assign release groups to release classes. Only one release*
     *class should be used within the release groups for overall release and*
     *the release groups without overall release in each case. However, in*
     *this instance several release classes have been used.*
                                                                                *Procedure*
                                                                                *Assign the release groups that were created for overall release to one*
     *release class only. Assign the release groups that were not created for*
     *overall release to a different release class.*
Thanks
Hiren

hi Hiren
U can use only one release class for Release strategy i.e 1 for PR 1 for external Purchase document ( PO,outline agreement,RFQ, and 1 for service
in your case u are trying to use two diff classes for same release group which is not possible
U can use only one class in service release per release group
Vishal...

Similar Messages

Why can we only use 1 release class for overall Release of Purchase Req?

Hi,
After realizing that it would be beneficial to use more than one release class for overall release of Purchase Requisition with classification, in use with release groups for overall release, I now ask if someone knows why SAP has chosen to only allow 1 release class for overall release of Purchase Requisition?
In my scenario I would like Release group US, used for release strategies for US-plant to be able to use 1 release class with a specific set of characteristics.
For example class REL_PREQ_CLASS_OVERALL_VALUE_IN_USD including a characteristic PR_TOTVAL_USD looking at CEBAN-GFWRT. The chosen currency for this characteristic would be USD.
I would then like to allow Release group FR, used for release strategies for FRANCE-plant to use another release class with another set of characteristics.
For example class REL_PREQ_CLASS_OVERALL_VALUE_IN_EUR including a characteristic PR_TOTVAL_EUR looking at CEBAN-GFWRT. The chosen currency for this characteristic would be EUR.
In this way the release strategies for the respective release groups US and FR, could maintain their overall limit values in their respective release strategies in their own currencies.
1. Observe that I do not want to use the same Release class for both release groups for overall release, even though I know that this is currently the only allowed option, as far as I've understood.
2. Observe that I do not want to specify the two characteristics PR_TOTVAL_USD and PR_TOTVAL_EUR for overall value in the same release class, as this would lead to double maintenance for a large number of release strategies. Also consider the maintenance when new countries with new currencies want release strategies.
3. Observe that I only want to use overall release.
What I'm trying to avoid is having to continuously translate local business USD overall value limits to limits in the currency chosen for the overall value characteristic. If this for example is specified in DKK, this would lead to a need to adjust the overall value limits as soon as the exchange rate between USD and DKK changes in the system.
Please consider this simple example:
Local requirement is that USD purchase requisitions should be blocked when the USD value is above 1000 USD. However in my release strategy I would have to maintain a value of >5365 DDK, if DKK is chosen as the currency for overall characteristic.(e.g exchange rate 5,365).
Next month the currency exchange rate in the system between USD and DKK has changed, and therefore I would have to go into CL24N and maintain the value to reflect the new exchange rate between USD and DKK. Lets say it has gone up to 5,435. I would now have to maintain a value of > 5435 DKK in my release strategy to correctly reflect the local business requirement of 1000 USD.
So if anyone could please explain why SAP has taken the decision to make the Release class for overall release client specific that would be much appreciated and awarded accordingly. Also if you have any suggestion on how I could obtain the above scenario on maintaning overall value limits in different currencies than that would be awarded to.
BR Jakob F. Skott

You can give feed back to Apple from the iTunes drop-down menu in the iTunes menu bar..
You can also contact the iTS Customer Service from the links on this page - http://www.apple.com/support/itunes/store/
MJ

ALE methodology to transport the release class

How can I use ALE methodology to transport the release class, release characteristics and release characteristic value assignment from one client to another client ?
please explain with clear steps.

Hi
Step 1: Move Characteristics to the target system/client (ALE).
i). In the source system/client, execute transaction BD91
This generates one idoc (logical message type CHRMAS) for each characteristic.
ii). In the source system, check the status of the outbound idocs using transaction WE05, selecting message type CHRMAS.
All outbound idocs should be in status 03 (Data Passed to Port OK).
iii). * Only exception is when target system is D94 client 110. In this case the idocs go to status 30 (IDoc ready for dispatch) and an extra step is required to release the idocs to the target system. In this case, using transaction SE38, run report RSEOUT00 to release the idocs.
iv). Check that the idocs were received and posted in the target system:
Log on to the target system & execute transaction WE05, selecting logical message type CHRMAS.
v). If any idocs are in status 64, run transaction BD87 to re-process these to status 53.
Step 2: Move Classes to the target system/client (ALE).
In the source system/client, execute transaction BD92
This generates one outbound idoc (message type CLSMAS) for each Class.
Step 3: Check Config & classification data in target system/client
Hope it helps
Thanks /Karthik

Release class

Hi friends
Do we have any way to use Two release classes for PO?

hi,
> You can haveonly one release class....but you can have more than one release groups assigned to release class....
Hope it helps..
Regards
Priyanka.P

Pls check release classes

Dear all ,
when i create release group for pr when i assign it to class an error msg come pls check release class(msg no me492)
i create new release group & new release class which was not earlier created
release group            rel obj              ovrr                             class
zo                               1                        x                                 zpr_overall
zi                                 1                      -                                 zpr_itemwise
pls guide how to resolve this.
Regards
Amin

Answered

Static Classes/Methods vs Objects/Instance Classes/Methods?

Hi,
I am reading "Official ABAP Programming Guidelines" book. And I saw the rule:
Rule 5.3: Do Not Use Static Classes
Preferably use objects instead of static classes. If you don't want to have a multiple instantiation, you can use singletons.
I needed to create a global class and some methods under that. And there is no any object-oriented design idea exists. Instead of creating a function group/modules, I have decided to create a global class (even is a abstract class) and some static methods.So I directly use these static methods by using zcl_class=>method().
But the rule above says "Don't use static classes/methods, always use instance methods if even there is no object-oriented design".
The book listed several reasons, one for example
1-) Static classes are implicitly loaded first time they are used, and the corresponding static constructor -of available- is executed. They remain in the memory as long as the current internal session exists. Therefore, if you use static classes, you cannot actually control the time of initialization and have no option to release the memory.
So if I use a static class/method in a subroutine, it will be loaded into memory and it will stay in the memory till I close the program.
But if I use instance class/method, I can CREATE OBJECT lo_object TYPE REF TO zcl_class then use method lo_object->method(), then I can FREE lo_object to delete from the memory. Is my understanding correct?
Any idea? What do you prefer Static Class OR Object/Instance Class?
Thanks in advance.
Tuncay

@Naimesh Patel
So you recommend to use instance class/methods even though method logic is just self-executable. Right?
<h3>Example:</h3>
<h4>Instance option</h4>
CLASS zcl_class DEFINITION.
METHODS add_1 IMPORTING i_input type i EXPORTING e_output type i.
METHODS subtract_1 IMPORTING i_input type i EXPORTING e_output type i.
ENDCLASS
CLASS zcl_class IMPLEMENTATION.
METHOD add_1.
    e_output = i_input + 1.
ENDMETHOD.
METHOD subtract_1.
    e_output = i_input - 1.
ENDMETHOD.
ENDCLASS
CREATE OBJECT lo_object.
lo_object->add_1(
exporting i_input = 1
importing e_output = lv_output ).
lo_object->subtract_1(
exporting i_input = 2
importing e_output = lv_output2 ).
<h4>Static option</h4>
CLASS zcl_class DEFINITION.
CLASS-METHODS add_1 IMPORTING i_input type i EXPORTING e_output type i.
CLASS-METHODS subtract_1 IMPORTING i_input type i EXPORTING e_output type i.
ENDCLASS
CLASS zcl_class IMPLEMENTATION.
METHOD add_1.
    e_output = i_input + 1.
ENDMETHOD.
METHOD subtract_1.
    e_output = i_input - 1.
ENDMETHOD.
ENDCLASS
CREATE OBJECT lo_object.
lo_object->add_1(
zcl_class=>add_1(
exporting i_input = 1
importing e_output = lv_output ).
lo_object->subtract_1(
zcl_class=>subtract_1(
exporting i_input = 2
importing e_output = lv_output2 ).
So which option is best? Pros and Cons?

Creation of Module - Object of class Channel

Hi everybody,
I neeed to create an adapter module in which I have to create an object of class Channel.
This object Channel belong to the package com.sap.aii.mapping.lookup
I need to know in which jar it is.
We are in PI 7.1.
Can somebody help me, please?
Thank in advance for your collaboration.
Best Regards.
E. Koralewski

Hi Eric,
>>>>>>>>>I neeed to create an adapter module in which I have to create an object of class Channel.This object Channel belong to the package com.sap.aii.mapping.lookup I need to know in which jar it is. We are in PI 7.1.
Please see what is you look for.
com.sap.xpi.ib.mapping.lib.jar
Regards,
Rajesh
Edited by: Rajesh_1113 on Feb 2, 2011 4:16 PM

Difference Between Business Object And Class Object

Hi all,
Can any one tel me the difference between business object and class Object....
Thanks...
..Ashish

Hello Ashish
A business object is a sematic term whereas a class (object) is a technical term.
Business objects are all important objects within R/3 e.g. sales order, customer, invoice, etc.
The business objects are defined in the BOR (transaction SWO1). The have so-called "methods" like
BusinessObject.Create
BusinessObject.GetDetail
BusinessObject.Change
which are implemented (usually) by BAPIs, e.g.:
Business Object = User
User.Create => BAPI_USER_CREATE1
User.GetDetail => BAPI_USER_GET_DETAIL
CONCLUSION: Business Object >< Class (Object)
Regards
Uwe

How to create unique objects in class and store

Hi, I have a class that opens a text file and reads in the
lines. each line holds an ip address. i need to create x amount of
objects, and each object is assigned a unique ip address from the file.
and here i am stuck. the class reads in the file, then i think it should create an object for each line read in and assign that object the ip address. i want to store the objects in some sort of array or collection, and i guess each object will need a unique name, but i dont know how many objects until i read in the file and count the number of lines. can anyone give me any pointers as to how i should create/store the objects
many thanx
ness

You could use your own object:
public class Test {
public class IPNumber {
    public int ip;
    public IPNumber(int ip) {
      this.ip = ip;
public Test() {
    int numberOfIPs = 5; // this is your number of lines
    IPNumber[] ips = new IPNumber[numberOfIPs];
    for (int i = 0; i < numberOfIPs; i++) ips[i] = new IPNumber(i); // assign ip address from file
public static void main(String args[]){
    new Test();
}or you could store the ips as strings:
public class Test {
public Test() {
    final int numberOfIPs = 5; // this is your number of lines
    final java.util.ArrayList al = new java.util.ArrayList(numberOfIPs);
    for (int i = 0; i < numberOfIPs; i++) al.add(""+i); // assign ip address from file
public static void main(String args[]){
    new Test();
}p.s Objects don't have names

Calling a object of class from other class's function with in a package

Hello Sir,
I have a package.package have two classes.I want to use object of one class in function of another class of this same package.
Like that:
one.java
package co;
public class one
private String aa="Vijay"; //something like
}main.java:
package co;
import java.util.Stack;
public class main extends Stack
public void show(one obj)
push(obj);
public static void main(String args[])
main oo=new main();
}when I compile main class, Its not compile.
Its give error.can not resolve symbol:
symbol: class one
location: class co.main
public void show(one obj)
^Please help How that compile "Calling a object of class from other class's function with in a package" beacuse I want to use this funda in an application

kumar.vijaydahiya wrote:
.It is set in environment variable.path=C:\bea\jdk141_02\bin;.,C:\oraclexe\app\oracle\product\10.2.0\server\bin;. command is:
c:\Core\co\javac one.javaIts compiled already.
c:\Core\co\javac main.javaBut it give error.
Both java classes in co package.Okay, open a command prompt and execute these two commands:
// to compile both classes:
javac -cp c:\Core c:\Core\co\*.java
// to run your main-class:
java -cp c:\Core co.main

Upload/download DDIC Objects, FM, Classes ....

Hello Experts,
Is there any possibility to download download DDIC Objects, FM, Classes and other ABAP Structures into a file ? I don't want to use transports. Do you know some FM down/uplowding such thinks ?
Thanks
Wojciech.

Of course the prefer way would be to use transports. There is a utility that you can use to download/upload ABAP programs and screens. It will not do ddic objects. I'm pretty sure that it will not do FM or classes.
There are a few of these out there, this is just one.
http://www.sap-img.com/abap/download-and-upload-your-abap-program.htm
Regards,
Rich Heilman

Object of class stdClass could not be converted to string

Dear all,
Im very new in PHP development and trying to consume a ASP.NET webservice.
This is my code:
<HTML>
<HEAD>
<TITLE>New Document</TITLE>
</HEAD>
<BODY>
<?php
require_once('lib/nusoap.php');
$soap = new SoapClient('https://testsoap.test.nl:446/Service1.asmx?wsdl');
try {
    $result = $soap->testPhp();
    echo "$result";
} catch (SoapFault $e) {
    echo "Error: {$e->faultstring}";
?>
</BODY></HTML>
When running this, im getting this error:
PHP Catchable fatal error: Object of class stdClass could not be converted to string . on line 14.
And this is line 14 in my code:
echo "$result";
Can anyone help me with this issue?
Thanks

Without knowing what version of PHP you are using and also there does not seem to be an SAP angle, have you tried var_dump() instead of echo.
e.g. var_dump($result);
http://php.net/manual/en/function.var-dump.php

Objects and classes

Hi All
I am new to ABAP Objects and i feel lil difficult to under the concept and classes..can any one please give me with small example to easily understand about the tole of objects and classes..
Thanks and Regards,
Arun joseph

Hi arun,
These are very simple concepts.There is no need to worry about it.
Object is an instance of a class.Class is an abstract description of an object. Class is a set of instructions that is used to build an object. Class represents properties of an object.
eg: Vehical, Car,Bird,Box,Student
Object represents a properties of real time entity like
engine, color,marks, legs,height,width etc.
The following links provide more information with examples.
Link:[http://help.sap.com/saphelp_nw70/helpdata/EN/c3/225b5c54f411d194a60000e8353423/frameset.htm]
Link:[http://help.sap.com/saphelp_nw70/helpdata/EN/c3/225b5c54f411d194a60000e8353423/frameset.htm]
if any more doubts, come to me with your doubts.
if it useful, reward points.
Thank you,
Prasad G.V.K

BAPI for Allocating Object to Class

Hi all Experts,
Pls help in how to use the following BAPIs.
BAPI_OBJCL_CREATE_KEY
BAPI_OBJCL_CHANGE_KEY
OR else provide me any other BAPI avaliable for Allocating Object to Class in MASS Processing / Single Entries.
Regards
Nagarajan M

Hello,
have a look at the following thread. There're some function modules that should fit to your requirements:
BAPI for CL24N
Best regards
Stephan

How to find objects and classes

hi
any notes or path on objects and classes on crm?

Hi Kumara
I beleive your talking about the Classification system.
To get to this go here: SPRO->IMG->Cross-Application Components - -> Classification System - -> Classes - -> Maintain Object Keys
This will give a list of Tables which are currently set with Object Keys, you may need to add a new table and configure.
Next
To get to this go here: SPRO->IMG->Cross-Application Components - -> Classification System - -> Classes - -> Maintain Object Types and Class Types
Here you assign a Class Type to Link your Table from the previous step, this class new Class Type will be used with a New Class to created in the following steps.
Goto Transaction CT04 - Create Characteristics
Here you create effectively attributes of a Class (Fields)
Goto Transaction CL01 - Create New Class
or CL02 - Maintain Class
Create a new class linked to your Class Type from previous steps
On the Char.. Tab you can add the new Characteristics created in the previous step to your new Class.
Based on the Object Key from the first step, these new attributes shoulds all now link together. If the key is of type 'RAW' (Binary) it may not be possible to link correctly, therefore some ABAP maybe required to create the link, depending on your application.
Hope this helps.
<b>Reward with points if useful.</b>
Regards
Arden

Release object / release class

Similar Messages

Maybe you are looking for