Release of EHP1

Hello!
I cannot find the information about current status of EHP1.
EHP1 SP02 is available on marketplace for download.
Does it mean that it is a release of EHP1?

Hi Sergey,
EhP1 SP02 is a service pack for the SAP NetWeaver Composition Environment Enhancement Pack 1.
For Composition Environment the new features are shipped as part of enhancement packages on top of the base release and each enhancement pack (EhP) then has its own service packs for the corrections/fixes for the EhP.
All service packs have a readme document and/or release notes that gives a list of all the corrections available with that pack. Also service packs(SPs) are cumulative so if you take the latest one then you get all the corrections for the previous SPs of your EhP.
You should always take the latest available service pack
You can choose from the available enhancement package depending on your feature requirement.
Hope this helps.
Supriya

Similar Messages

  • Central Contract Management in case of Classic Scenario

    Hi,
    At our current implementation, requirement is to implement both Service procurement(with hierarchy) and Central Conract Management. I was exploring the possibility of utilizing Central Contract Management with Classic scenario.
    Will the Central Contracts created in this fashion be available in Sourcing Cockpit for the buyer to select against Purchase Requisitions? Will the Central Contract be visible at all in SRM in this case ?
    Please respond only with reference to Classic scenario.
    Thanks,
    Abhilash

    Yes the Central Contract will be available in the Sourcing Cockpit, both local and classic scenario's. Yes the Central Contracts will be available for the creation of Purchase Requisitions in R/3 and to assign SOS in R/3.
    Do know that for SRM 7.0 PI is required for setting up Central Contracts. This is promised to change with the release of EHP1 for SRM (due june 2010).
    Kind regards,
    Tim

  • SRM 700 ADVANTAGES LIST

    1.BACKGROUD PROCESSING
    2. BLOCK LOCAL SOURCING
    3.srm 7.0 ehp4 ecc 6.0 xi RATHER THAN idoc
    4.contract hierarchy
    5. Can any one hammer the Contract ?- Authoirisation
    6.attachment transfer
    7.no of line item - optimum
    8.what are the extra facilities in SRM 700 contracts.
    9.Service contract
    10. pricing
    can any expalin all or any points in details in SRM 700. I keep open eyes on CCTR contract advantages? Are still extra badis require to push the contract without techical help.?
    any piece of information is appreciated.
    Muthu

    Hello Muthu,
    At this point in time SRM 7.0 needs XI/PI for CCTR capability, this is promised to change with the release of EHP1 (due june 2010).
    My list of additional features, not neccesarily advantages but might be usefull to you:
    Userside:
    - Webfront no more ITS based: Webdynpro's + Enterprise Portal (look & feel = R/3) (advantages: SSO / central user mgt)
    - configurable queries
    - Universal Work List (UWL)
    - Sourcing transaction / soco ()
    User mgt:
    - SRM User mgt = Portal user mgt (portal user + application user)
    Workflow:
    - Process Controlled WF / Application Controlled WF (New: Process Controlled, model custom rules / WF's more easily)
    Central Contract Management
    - Central Contract - Transaction type CCTR (New: big advantage!), SRM Contract - PCTR, Global Outline Agreement - GCTR
    - Create contract templates
    - legal contract authoring part
    Plan Driven procurement:
    - Plan Driven Procurement and ERP EHp4 needs XML/PI for data exchange (rfc's currently not supported: SRM 7.0 EHP1)
    - ERP EHP4 uses CPPR (Collective Processing of Purchase Requisitions), optional portal feature
    Shoppincart:
    - SC ability to create combined SC's (limit + free text + catalog + service)
    - Team purchasing
    Service Procurement:
    - ERP EHP4 and SRM 7.0: sourcing of erp service req. including hierarchies and follow-on docs ("enhanced service procurement")
    Auctioning:
    dutch auction functionality (SRM/LAC seems to have inherited this functionality from E-Sourcing)
    Industry Solution:
    - Procurement for Public Sector (PPS)
    - Document Builder, smart numbering
    Kind regards,
    Tim

  • Compatibility between XI3.0 with ESR 7.0 Ehp1 release

    Customer has a scenario where content is built in ESR 7.0 Ehp1 release and will like to use it in XI 3.0
    Is this scenario supported? Any official documentation will be helpful.
    Regards,
    Arpit

    I dont think this is supported.
    I tried to import IR content from 7.1 to 7.0 but those files are not being recognized by 7.0.
    Venkat.

  • Release Notes SAP Solution Manager 7.0 EhP1 - SP21 - SP23  available

    Now available:
    [Release Notes SAP Solution Manager 7.0 EHP 1 - SP 21-23|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000090041&_SCENARIO=01100035870000000202&_OBJECT=011000358700000528082010E]
    The document is published in the following folder with "Technical Information":
    [http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000090041&_SCENARIO=01100035870000000202&]
    SP23 includes several new functions in the area "Application Incident Management", which have been requested by VARs.
    Regards, Ruediger

    Please see also this detailed presentation:
    [SAP Solution Manager SP23 - New Functions for VAR Partners|http://service.sap.com/~sapidb/011000358700000580432010E]

  • Java Addin in SAP Netweaver 7.0 EHP1

    Hi Experts,
    I have a question about Java Add-in in release Netweaver 7.0 EHP1.  As I have understood, with SAP Business Suite 7.0 cannot install java add-in in abap system.  Is that correct?
    I have in a upgrade proces of BW from 3.5 (ABAP, NO-UNICODE to Netweaver 7.0 EHP1 (without unicode conversion).  The upgrade has successfully completed, but now I need to install portal components (EP, EP-CORE and BI-JAVA).  How can I install this componentes?...  If I install a new system Portal, this would have to be UNICODE...  so, can I have, in the same server, two system, one NO-UNICODE (BI) and the other UNICODE (Portal)...??
    Best Regards
    Juan Carlos Barraza

    Hi Barraza,
    We had this similar issue. So, here are the answers for your questions.
    - Yes, correct. As of SAP Business Suite 7.0 one cannot install java add-in in abap system (Note 855534 ).
    - You have Abap as Non-unicode on EHP1. So, Java AddIn installation is NOT supported as Java is a Unicode. The only way for you is, to install a separate Java System in the same machine. Yes, you can install 2 or many systems in a server if the server is strong enough. Then connect the Java system to the Abap system, it works. There is a configuration for this connection.
    Later, if you want to upgrade the Abap system to EHP4 or upwards, it can also be done without much hassel. Please award if you find my post useful.
    Regards,
    Mohan.

  • Upgrade from 3.0B (release 620) to BI 7.1 (release 710)

    Hi,
    Please guide me whether it is possible to upgrade from BW 3.0B system to BI 7.1, I am in release 620 now.
    Can you please help me locate upgrade guide for the same?
    Looking forward for your replies
    Thank you
    Rajath

    lol
    There is nothing called as NW BI 7.1,
    I found the upgarde guide for NW 7.0 BI : https://websmp205.sap-ag.de/~sapidb/011000358700001461642008E#q2
    in SMP,
    We can upgrade to SAP NETWEAVER 7.0 from the following basis release:
    SAP BW 2.0B; SAP BW 2.1C; SAP BW 3.0B; SAP BW 3.1 CONTENT;
    From there we can install EHP1 for NW 7.0 i.e of basis 701.
    Thank you all for taking your time to resolve my problem.
    Cheers!
    Rajath

  • System Monitoring - Solman 7 EHP1

    Hi
    Solution Manager 7.0 EHP1 / Windows 2008 / Oracle
    Satellite System R/3 Enterprise extn set 110 / Solaris on Sparc / Oracle
    I am having trouble configuring System monitoring on solution Manager. Here is what I have done
    Added the satellite system to SLD, Configured data collector (RZ70) in the satellite system, Pushed data from SLD to SMSYS (automatic transfer).
    Installed CCMS agent + CCMSPING agent in satellite system. Checked connectivity in solman with RZ21. Connectivity is fine.
    Created Monitor sets and monitors in CCMS for monitoring satellite system. Client data is visible in CCMS.
    Created a solution in DSWP. Created logical component in SMSY. Assigned the logical component to the solution. Now I can see the data in DSWP.
    Here are my questions
    ==================
    1. In DSWP, everytime I have to view data, I have to click on "Setup System Monitoring" to view the alerts in the satellite system
    I see a red alert reading for instance availability. Similarly,
    In the system monitoring workcenter, I see the status of both the solution manager and the satellite system greyed out with a cross. When I move my mouse over it, it reads, no CCMSPING data available.
    Any idea as to why this happens?
    2. For what I see after I click on "Setup System Monitoring" I have parameters which I can configure. I see default values for these parameters. Is there like a recommendation or a template which can be used to setup these monitoring parameter values?
    3. I have configured the ccmsping in the solution manager (for the solution manager) however the ccmsping service refuses to run. It throws a error reading "The system could not find the file specified". The ccmsping exe file is present in the location stated. Are there other files that this is looking for?
    4.  While registering the agent in the satellite system, I first registered with the CSMREG id. It failed with the message,
    INFO: [SMG:040:CSMREG] connected to SMG, host sapsm.NA.XXX.NET, System Nr. 00, traceflag [ ]
    INFO: SMG release is 701 , (kernel release 701 )
            RFC Error Info:
             message:
             status:  EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
             intstat:
          Go Ahead anyway?  n/[y] :
    INFO: handling destination SAPCCM4X.SAPR3PR1.00
    ERROR: can't register at SMG. RfcRc = 2, AUTHORITY_NOT_AVAILABLE
    RFC Error Info for SALF_CSM_AGENT_REGISTER
    message:
    status:  EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
    intstat:
    I then did this with a dialog user. That worked. Agent was registered in solution manager. Any idea on why this error would show up with the CSMREG? I am concerned about issues which can come up when the password for the dialog user changes.
    I am not sure how to upload screenshots of what i see, probably if i do that, it will be easy to relate to the issue which I am mentioning here. Is there a way I can do that?
    Let me know if you need any more information from my side to understand this.
    Ideas will be appreciated.
    thanks
    Ravi

    Hello Ravi,
    Additionally you will want to look at SAP Note 1175058 - Problems with CCMSPING in SAP Solution Manager, especially
    c) Ensure that the message server host name in the monitoring options of CCMSPING and the message server of the corresponding main instance of the relevant system is the same in the SAP Solution Manager landscape
    (SMSY). Important: The monitoring options of CCMSPING must not be configured using an IP address.
    Regards,
    Paul

  • Variable conversion in BEx Web 3.5 after EHP1 Update

    Hello experts,
    we have a problem after updating to ehp1 with a 3.5 web query. When we enter in the variable screen for the characteristic variable of fiscal year "0032010" then the bi clears that field. Without ehp1 the system replaces "00332010" with "003.2010". When we execute the query in BEx Analyzer everyting works correctly with ehp1. Does anybody know a solution?
    Thanks and regards.
    Edited by: Gerrit Lober on May 18, 2010 11:17 AM

    Hi,
    Please check note 1368772. You need to set the parameter ALLOW_INVALID_VARIABLE_VALUES to reactivate the same behaviour as in release 700.
    Best regards,
    Janine

  • Upgrade from PI 7.0 SP18 to PI 7.1 EHP1

    Hi all,
                                                                                    I'm performing an Upgrade from Netweaver PI 7.0 SP18 to PI 7.1 EHP1.
    I've checked all the notes ragarding any known issuses about the process BUT....
    Here's the problem: in Phase TR_CMDIMPORT_PREPARE ( during the Support Package Import ) the upgrade stops with this error:
    ERROR: 339 errors detected during TR_CMDIMPORT_PREPARE.
           Errors are accumulated in file PCMDIMP.ELG.
    PCMDIMP.ELG shows problems related to R3trans version, but, as you can see, my version is newer:
    "2EETW000 import of new package definition (note 1089083 needs at least R3trans version 6.18, this is 6.19."
    What could possibly be wrong?
    Notice that in my download directory I've put:
    the latest Upgrade Correction ( NW711_19-10007578.SAR ).
    the latest Kernel ( 711 46 )
    the latest EHP1 Support Package ( 03 )
    the latest SAPup: 7.10/5 29.003 ( as suggested by note 1156185. I know it's 7.10, not 7.11 but the note it's clear on that. Anyway i tried, unsuccessfully, without the SUPup, so.... )
    I use the following media:
    NW PI 7.1 EHP1 Upgrade Master 51036470
    NW 7.11 IM/Kernel/TREX WIN x64, IA64 51036476
    NW AS ABAP 7.1 EHP1 Language 51036707
    I even tried to use the original Kernel from the DVD...
    Any suggestion?
    Thanks and Regards,
    Andrea
    P.S. Partial PCMDIMP.ELG  file :
      LIST OF ERRORS AND RETURN CODES  *******
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    CMDFILE IMPORT ERRORS and RETURN CODE in SAPL-71101INPIBASIS.JIM
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 ETP111 exit code           : "4"
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    CMDFILE IMPORT ERRORS and RETURN CODE in SAPL-71102INPIBASIS.JIM
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 ETP111 exit code           : "4"
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    CMDFILE IMPORT ERRORS and RETURN CODE in SAPL-71103INPIBASIS.JIM
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    2EETW000 import of new package definition (note 1089083 needs at least R3trans version 6.18, this is 6.19.
    2EETW000 import of new package definition (note 1089083 needs at least R3trans version 6.18, this is 6.19.
    2EETW000 import of new package definition (note 1089083 needs at least R3trans version 6.18, this is 6.19.
    2EETW000 import of new package definition (note 1089083 needs at least R3trans version 6.18, this is 6.19.
    1 ETP111 exit code           : "8"
    Edited by: Andrea Campo on Sep 23, 2009 2:37 PM
    Edited by: Andrea Campo on Sep 23, 2009 2:38 PM

    This is part of SAPL-71103INPIBASIS.JIM:-------
    4 EPU201XBEGIN OF SECTION BEING ANALYZED
    1 ETP199X######################################
    1 ETP179 CREATE COFILE FROM DATAFILE
    1 ETP101 transport order     : "SAPK-71103INPIBASIS"
    1 ETP102 system              : "JIM"
    1 ETP108 tp path             : "E:\usr\sap\JIM\upg\abap\exe\tp.EXE"
    1 ETP109 version and release : "375.32.47" "711"
    1 ETP198
    4 ETW000 E:\usr\sap\JIM\upg\abap\exe\R3trans.exe version 6.19 (release 711 -
    22.01.09 - 11:27:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 23.09.2009 - 12:47:46
    4 ETW000 control file: E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
    4 ETW000 > #pid 4904 on srvsvi-w037v (APServiceJIM)
    4 ETW000 > createcofile
    4 ETW000 > file='E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP'
    4 ETW000 >
    4 ETW000 R3trans was called as follows: E:\usr\sap\JIM\upg\abap\exe\R3trans.exe -w
    E:\usr\sap\JIM\upg\abap\tmp\SAPL-71103INPIBASIS.JIM
    E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
    4 ETW000  trace at level 1 opened for a given file pointer
    4 ETW000
    4 ETW000 ================== STEP 1 =====================
    4 ETW000 date&time        : 23.09.2009 - 12:47:46
    4 ETW000 function         : CREATECOFILE
    4 ETW000 data file        : E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP
    4 ETW000 buffersync       : NO
    4 ETW000 clients          : default
    4 ETW000 commit           : -1
    4 ETW000 table cache      : dynamic
    4 ETW000
    4 ETW000 Character set on this machine : 2 byte unicode little endian.
    4 ETW000 Character set on the data file: 2 byte unicode big endian.
    4 ETW000 Data file is compressed with algorithm 'L'.
    4 ETW000 Export was executed on 01.07.2009 at 14:30:19 by k7dadm     
    3 ETW709 "711 "
    4 ETW000   with R3trans version: 22.01.09 - 11:27:00
    4 ETW000 Source System = Solaris on SPARCV9 CPU on DBMS = DB6 --- DB2DBDFT = 'K7D'
    --- SYSTEM = 'K7D'.
    4 ETW000
    4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd
    4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd (ISO-
    ZHTHKOROSLHRUKARHECSDEENFRELHUITJADAPLZFNLNOPTSKRUESTRFISVBGCASH)
    4 ETW000 lsm during export: ALL
    4 ETW000 datafile was created with 'langdeletions=no'.
    4 ETW000 trfunction = D (patch transport)
    3 ETW692 "SAPK-71103INPIBASIS "
    3 ETW708 "000"
    3 ETW695 "D"
    3 ETW694 "SAP       "
    3 ETW693 "SAP         "
    3 ETW696 "20090609"
    3 ETW713 "PI_BASIS Support Package 03 for 7.11                        "
    3 ETW691 "CORRMERGMERGEINFO PI_BASIS K7D 20090609 133924                           
    3 ETW707 "CORRMERGMERGEINFO PI_BASIS K7D 20090609 133924                           
    3 ETW691 "LIMUCLSD/SCMB/CA_DF_ATTR_QTY                                                                               
    3 ETW707 "R3TRCLAS/SCMB/CA_DF_ATTR_QTY"
    4 ETW000 809204 bytes read.
    4 ETW000 Transport overhead 17.1 %.
    4 ETW000 Data compressed to 7.0 %.
    4 ETW000 Duration: 0 sec (809204 bytes/sec).
    3 ETW710 "0" "0"
    4 ETW000 End of Transport (0000).
    4 ETW000 date&time: 23.09.2009 - 12:47:46
    1 ETP179 CREATE COFILE FROM DATAFILE
    1 ETP110 end date and time   : "20090923124746"
    1 ETP111 exit code           : "0"
    1 ETP199 ######################################
    1 ETP199X######################################
    1 ETP176 IMPORT OF COMMANDFILE ONLY
    1 ETP101 transport order     : "SAPK-71103INPIBASIS"
    1 ETP102 system              : "JIM"
    1 ETP108 tp path             : "E:\usr\sap\JIM\upg\abap\exe\tp.exe"
    1 ETP109 version and release : "375.32.47" "711"
    1 ETP198
    4 ETW000 E:\usr\sap\JIM\upg\abap\exe\R3trans.exe version 6.19 (release 711 -
    22.01.09 - 11:27:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 23.09.2009 - 12:49:20
    4 ETW000 control file: E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
    4 ETW000 > #pid 7740 on srvsvi-w037v (jimadm)
    4 ETW000 > import
    4 ETW000 > buffersync=no
    4 ETW000 > file='E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP'
    4 ETW000 > continuation='E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS_#.SAP'
    4 ETW000 > client cascade yes
    4 ETW000 > repeatimport=yes
    4 ETW000 > importtruncated = yes
    4 ETW000 > including 'NOTHING'
    4 ETW000 R3trans was called as follows: E:\usr\sap\JIM\upg\abap\exe\R3trans.exe -u
    26 -w E:\usr\sap\JIM\upg\abap\tmp\SAPL-71103INPIBASIS.JIM
    E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
    4 ETW000 active unconditional modes: 26
    4 ETW000 Connected to DBMS = MSSQL ---  SERVER = 'SRVSVI-W037V' DBNAME = 'JIM' ---
    SYSTEM = 'JIM'.
    4 ETW690 COMMIT "0" "0"
    4 ETW000  trace at level 1 opened for a given file pointer
    4 ETW000
    4 ETW000 ================== STEP 1 =====================
    4 ETW000 date&time        : 23.09.2009 - 12:49:20
    4 ETW000 function         : IMPORT
    4 ETW000 data file        : E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP
    4 ETW000 Continuation     : E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS_#.SAP
    4 ETW000 buffersync       : NO
    4 ETW000 clients          : cascade
    4 ETW000 repeatimport     : YES (corresponds to unconditional mode 1)
    4 ETW000 repeatclimport   : NO
    4 ETW000 c.s.i.           : NO
    4 ETW000 importtruncated  : YES (imported data may be destroyed!)
    4 ETW000 charsetadapt     : YES
    4 ETW000 def. charset     : WEUROPEAN
    4 ETW000 commit           : 100000
    4 ETW000 table cache      : dynamic
    4 ETW000 INCLUDING        : 'NOTHING'
    4 ETW000
    4 ETW000 rejected clients : 066
    4 ETW000
    4 ETW000 client cascade to: 000, 001
    4 ETW000 Character set on this machine : 2 byte unicode little endian.
    4 ETW000 Character set on the data file: 2 byte unicode big endian.
    4 ETW000 Data file is compressed with algorithm 'L'.
    4 ETW000 Export was executed on 01.07.2009 at 14:30:19 by k7dadm     
    3 ETW709 "711 "
    4 ETW000   with R3trans version: 22.01.09 - 11:27:00
    4 ETW000 Source System = Solaris on SPARCV9 CPU on DBMS = DB6 --- DB2DBDFT = 'K7D'
    --- SYSTEM = 'K7D'.
    4 ETW000
    4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd
    4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd (ISO-
    ZHTHKOROSLHRUKARHECSDEENFRELHUITJADAPLZFNLNOPTSKRUESTRFISVBGCASH)
    4 ETW000 lsm during export: ALL
    4 ETW000 datafile was created with 'langdeletions=no'.
    4 ETW000 trfunction = D (patch transport)
    4 ETW000 switching to selective language import
    4 ETW000 the following languages will be imported: DEI
    4 ETW000 Used Commandfile SAPK-71103INPIBASIS  (SAPUSER/140)
    4 ETW000 This is a patch transport.
    4 ETW000   1 entry for E070 updated  (SAPK-71103INPIBASIS).
    4 ETW000 140 entries for E071 inserted (SAPK-71103INPIBASIS *).
    4 ETW000   1 entry for E071K inserted (SAPK-71103INPIBASIS *).
    4 ETW000   1 entry for E071KF inserted (SAPK-71103INPIBASIS *).
    4 ETW000   1 entry for E070C inserted (SAPK-71103INPIBASIS).
    4 ETW000   1 entry for E07T updated  (SAPK-71103INPIBASIS *).
    4 ETW690 COMMIT "103098" "103098"
    3WETW000 different nametabs for table ENHOBJ (field ENHOBJTYPE).
    3WETW000 key field truncated
    3WETW000   Key field is not in NTAB.
    4 ETW000      table ENHOBJ: entry in DB is 2 bytes smaller than in file.
    4 ETW000      ... ignoring such differences.
    3WETW000 different nametabs for table TRDIR (field TROBJECT_TYPE).
    4 ETW000       Field is not in NTAB.
    3WETW000 different nametabs for table TRDIR (field TROBJECT_NAME).
    3WETW000 different nametabs for table SPROXREG (field IFR_IDEMPOTENT).
    [u2026]
    4 ETW000       Field is not in NTAB.
    4 ETW000      table SPROXREG: entry in DB is 2 bytes smaller than in file.
    4 ETW000      ... ignoring such differences.
    3 ETW677 "R3TRCLAS/SCMB/CL_DF_ARCH_ADD_TABLE" not imported in this step.
    2EETW000 import of new package definition (note 1089083 needs at least R3trans
    version 6.18, this is 6.19.
    [u2026]
    4 ETW000 no entries for PAK_RUNTIME_ENV will be imported in this step.
    3 ETW677 "R3TRDEVC/SCMB/FLOW" not imported in this step.
    2EETW000 import of new package definition (note 1089083 needs at least R3trans
    version 6.18, this is 6.19.
    3 ETW677 "R3TRDEVC/SCMB/FLOW_NET" not imported in this step.
    3 ETW677 "R3TRDSYSSIMGASC0TSAI" not imported in this step.
    3WETW000 different nametabs for table ENHLOG (field ENHTOOLTYPE).
    4 ETW000       Field is not in NTAB.
    4 ETW000      table ENHLOG: entry in DB is 20 bytes smaller than in file.
    4 ETW000      ... ignoring such differences.
    3 ETW677 "R3TRENHO/SCMB/ARC_DOCFLOW_ADD_TABLE" not imported in this step.
    3 ETW677 "R3TRFUGR/SCMB/DF_ARCHIVE" not imported in this step.
    3 ETW677 "R3TRFUGRRSC2" not imported in this step.
    2EETW000 import of new package definition (note 1089083 needs at least R3trans
    version 6.18, this is 6.19.
    4 ETW109 table "PAK_INTF_CONTENT" does not exist in nametab.
    4 ETW000 no entries for PAK_INTF_CONTENT will be imported in this step.
    3 ETW677 "R3TRPINF/SCMB/FLOW_API_DOCUMENT" not imported in this step.
    2EETW000 import of new package definition (note 1089083 needs at least R3trans
    version 6.18, this is 6.19.
    3 ETW677 "R3TRPINF/SCMB/FLOW_API_NET" not imported in this step.
    4 ETW000 SAPK-71103INPIBASIS  touched.
    4 ETW690 COMMIT "128" "103226"
    4 ETW000 809204 bytes read.
    4 ETW000 Transport overhead 17.1 %.
    4 ETW000 Data compressed to 7.0 %.
    4 ETW000 Duration: 0 sec (809204 bytes/sec).
    3 ETW710 "0" "0"
    4 ETW000
    4 ETW000 Summary:
    4 ETW000
    4 ETW000   1 COMML imported.
    4 ETW000   1 COMMT imported.
    4 ETW000 Totally 2 Objects imported.
    4 ETW000
    4 ETW000 103226 bytes modified in database.
    4 ETW000  [dev trc     ,00000]  Disconnecting from ALL connections:              
    264239  0.264239
    4 ETW000  [dev trc     ,00000]  Disconnected from connection 0                     
    4041  0.268280
    4 ETW000  [dev trc     ,00000]  statistics db_con_commit (com_total=3, com_tx=3)
    4 ETW000                                                                               
    31  0.268311
    4 ETW000  [dev trc     ,00000]  statistics db_con_rollback (roll_total=0,
    roll_tx=0)
    4 ETW000                                                                               
    23  0.268334
    4 ETW000 Disconnected from database.
    4 ETW000 End of Transport (0008).
    4 ETW000 date&time: 23.09.2009 - 12:49:20
    4 ETW000 34 warnings occured.
    4 ETW000 4 errors occured.
    1 ETP176 IMPORT OF COMMANDFILE ONLY
    1 ETP110 end date and time   : "20090923124920"
    1 ETP111 exit code           : "8"
    1 ETP199 ######################################
    1 ETP199X######################################
    1 ETP176 IMPORT OF COMMANDFILE ONLY
    1 ETP101 transport order     : "SAPK-71103INPIBASIS"
    1 ETP102 system              : "JIM"
    1 ETP108 tp path             : "E:\usr\sap\JIM\upg\abap\exe\tp.exe"
    1 ETP109 version and release : "375.32.47" "711"
    1 ETP198
    4 ETW000 E:\usr\sap\JIM\upg\abap\exe\R3trans.exe version 6.19 (release 711 -
    22.01.09 - 11:27:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 23.09.2009 - 13:57:11
    4 ETW000 control file: E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
    4 ETW000 > #pid 5540 on srvsvi-w037v (jimadm)
    4 ETW000 > import
    4 ETW000 > buffersync=no
    4 ETW000 > file='E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP'
    4 ETW000 > continuation='E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS_#.SAP'
    4 ETW000 > client cascade yes
    4 ETW000 > repeatimport=yes
    4 ETW000 > importtruncated = yes
    4 ETW000 > including 'NOTHING'
    4 ETW000 R3trans was called as follows: E:\usr\sap\JIM\upg\abap\exe\R3trans.exe -u
    26 -w E:\usr\sap\JIM\upg\abap\tmp\SAPL-71103INPIBASIS.JIM
    E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
    4 ETW000 active unconditional modes: 26
    4 ETW000 Connected to DBMS = MSSQL ---  SERVER = 'SRVSVI-W037V' DBNAME = 'JIM' ---
    SYSTEM = 'JIM'.
    4 ETW690 COMMIT "0" "0"
    4 ETW000  trace at level 1 opened for a given file pointer
    4 ETW000
    4 ETW000 ================== STEP 1 =====================
    4 ETW000 date&time        : 23.09.2009 - 13:57:11
    4 ETW000 function         : IMPORT
    4 ETW000 data file        : E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP
    4 ETW000 Continuation     : E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS_#.SAP
    4 ETW000 buffersync       : NO
    4 ETW000 clients          : cascade
    4 ETW000 repeatimport     : YES (corresponds to unconditional mode 1)
    4 ETW000 repeatclimport   : NO
    4 ETW000 c.s.i.           : NO
    4 ETW000 importtruncated  : YES (imported data may be destroyed!)
    4 ETW000 charsetadapt     : YES
    4 ETW000 def. charset     : WEUROPEAN
    4 ETW000 commit           : 100000
    4 ETW000 table cache      : dynamic
    4 ETW000 INCLUDING        : 'NOTHING'
    4 ETW000
    4 ETW000 rejected clients : 066
    4 ETW000
    4 ETW000 client cascade to: 000, 001
    4 ETW000 Character set on this machine : 2 byte unicode little endian.
    4 ETW000 Character set on the data file: 2 byte unicode big endian.
    4 ETW000 Data file is compressed with algorithm 'L'.
    4 ETW000 Export was executed on 01.07.2009 at 14:30:19 by k7dadm     
    3 ETW709 "711 "
    4 ETW000   with R3trans version: 22.01.09 - 11:27:00
    4 ETW000 Source System = Solaris on SPARCV9 CPU on DBMS = DB6 --- DB2DBDFT = 'K7D'
    --- SYSTEM = 'K7D'.
    4 ETW000
    4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd
    4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd (ISO-
    ZHTHKOROSLHRUKARHECSDEENFRELHUITJADAPLZFNLNOPTSKRUESTRFISVBGCASH)
    4 ETW000 lsm during export: ALL
    4 ETW000 datafile was created with 'langdeletions=no'.
    4 ETW000 trfunction = D (patch transport)
    [u2026]
    roll_tx=0)
    4 ETW000                                                                               
    23  0.228932
    4 ETW000 Disconnected from database.
    4 ETW000 End of Transport (0008).
    4 ETW000 date&time: 23.09.2009 - 13:57:11
    4 ETW000 34 warnings occured.
    4 ETW000 4 errors occured.
    1 ETP176 IMPORT OF COMMANDFILE ONLY
    1 ETP110 end date and time   : "20090923135712"
    1 ETP111 exit code           : "8"
    1 ETP199 ######################################
    4 EPU202XEND OF SECTION BEING ANALYZED

  • EHP1 Upgarde Monitor screen resolution problem in a support message

    Hi Experts,
    We have recently upgraded our Solution manager to EHP1, iam facing a screen resolution problem with 15 inch monitors.
    Our key users have 15 inch monitors to their system and when they try to reply a support message under transaction data-> Overview tab -> reply it is showing only one line for them , due to which they are unable to enter the complete data in it.
    How ever We have found that this does not occur with 17 inc monitors as the required screen resoution 1280* 1024 is possible due to bigger size of the monitor.
    can any one suggest how to make the overview tab visible completely with small resolution monitors.
    Thanks
    Nanda

    >
    Nanda Kishore wrote:
    > Hi
    >
    > There is an note from sap on this issue i couldnt remember the note number which talks about updating your package levell
    >
    > Kindly check this note it was released in SEP 09 a very recent one. this will resolve your probelm.
    SAP Note 1351673      Size of containers not changed for support messages       
    Best regards,
    Ruediger

  • ChaRM: Error while releasing transport

    Hi Team,
    I have configured ChaRM in Sol Man (Sol Man 7.0 EHP1, SP24). When i try to release transport thro ChaRM, i am getting below error.
    No valid TM target found. Message number:/RTC/TMM00154
    Your valuable inputs required
    Thanks
    Kumar

    Hello,
    Perhaps you would like to review this [guide|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089860&_SCENARIO=01100035870000000112&_OBJECT=011000358700000657692007E]
    Regards,
    Paul

  • EHP1 FOR CRM 7.0

    Hello,
    I am installing in my EHP1 CRM 7.0 (ABAP), but in phase (preprocessing) after he doubled the bank of the following message:
    To analyze errors During the start of shadow instance,
           view files 'STARTSFI.LOG' and 'DEVTRACE.LOG'
           in directory 'D: \ medias \ ehpi \ EHPI \ abap \ log'
           After fixing the error, repeat phase until shadow instance is
           Can you started and log on instance number '01 '.
    The following are the logs.
    'STARTSFI.LOG'
    Entering a ETQ201 upgrade-phase "START_SHDI_FIRST" ("20111225104654")
    Sep 4 ETQ399 connect standard environment is:
    2 ETQ367 Connect variables are set is standard instance access
    4 ETQ399 System-nr = '00 ', GwService =' sapgw00 '
    4 ETQ399 Environment variables:
    4 ETQ399 dbs_mss_schema = crd
    ETQ399 auth_shadow_upgrade 4 = 0
    Executing a pre-phase ETQ206 DB specific actions.
    Executing a pre-phase ETQ206 DB specific actions.
    Executing a ETQ200 current phase 'MAIN_SHADOW / START_SHDI_FIRST'.
    Phase 1 ETQ399 arguments:
    2 ETQ399 Arg [0] = 'DEVTRACE.LOG'
    Sep 4 ETQ399 environment for shadow connect:
    Sep 4 ETQ399 RFC variables for shadow connect:
    4 ETQ399 System-nr = '01 ', GwService =' sapgw01 '
    4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
    4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
    4 ETQ382 translate to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translate to path "exe"
    4 ETQ383 translate to path "exe"
    Sep 4 ETQ399 tool parameters for shadow connect:
    4 ETQ399 default TPPARAM: SHADOW.TPP
    4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
    4 ETQ381 request "TP_ALWAYS_NEW" means "always DIR_PUT from tp / exe, is phase KX_SWITCH"
    4 ETQ382 translate to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translate to path "exe"
    4 ETQ383 translate to path "exe"
    2 ETQ399 Starting shadow instance
    4 ETQ359 RFC Login to: System = "CRD", Nr = "01", GwHost = "fhsrv011" GwService = "sapgw01"
    2 ETQ231 RFC Login failed
    4 ETQ359 RFC Login to: System = "CRD", Nr = "01", GwHost = "fhsrv011" GwService = "sapgw01"
    2 ETQ231 RFC Login failed
    2 Stopping ETQ399 shadow instance
    4 ETQ359 RFC Login to: System = "CRD", Nr = "01", GwHost = "fhsrv011" GwService = "sapgw01"
    2 ETQ231 RFC Login failed
    4 ETQ359 RFC Login to: System = "CRD", Nr = "01", GwHost = "fhsrv011" GwService = "sapgw01"
    2 ETQ231 RFC Login failed
    2 Starting system ETQ353
    2EETQ399 Starting shadow instance failed
    And 'DEVTRACE.LOG'
    trc file: "dev_disp", trc level: 1, release: "720"
    sysno 01
    sid CRD
    systemid 562 (PC with Windows NT)
    RELN 7200
    patchlevel 0
    patchno 100
    intno 20020600
    make multithreaded, Unicode, 64 bit, optimized
    profile D: \ medias \ ehpi \ EHPI \ abap \ CRD \ SYS \ profile \ CRD_DVEBMGS01_fhsrv011
    pid 3332
    kernel runs with dp version 131000 (ext = 118000) (@(#) DPLIB-INT-VERSION-131000-UC)
    length of 588 bytes is sys_adm_ext
    SWITCH TRC-HIDE on ***
    LOG Q00 => DpSapEnvInit, DPStart (01 3332) [dpxxdisp.c 1287]
    shared lib "dw_xml.dll" version 100 successfully loaded
    shared lib "dw_xtc.dll" version 100 successfully loaded
    shared lib "dw_stl.dll" version 100 successfully loaded
    shared lib "dw_gui.dll" version 100 successfully loaded
    shared lib "dw_mdm.dll" version 100 successfully loaded
    shared lib "dw_rndrt.dll" version 100 successfully loaded
    shared lib "dw_abp.dll" version 100 successfully loaded
    shared lib "dw_sym.dll" version 100 successfully loaded
    shared lib "dw_aci.dll" version 100 successfully loaded
    rdisp / softcancel_sequence: -> 0.5, -1
    rdisp / dynamic_wp_check: 0
    rdisp / calculateLoadAverage: 1
    Sun Dec 25 11:11:48 2011
    WARNING => DpNetCheck: NiAddrToHost (1.0.0.0) took 5 seconds
    GZZ *** LOG => 1 Possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6404]
    MtxInit: 30 000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: dp-profile-write values ​​into sys_adm_ext
    DpIPCInit2: start server> fhsrv011_CRD_01 <
    DpShMCreate: sizeof (wp_adm) 31 696 (2264)
    DpShMCreate: sizeof (tm_adm) 5,517,056 (27,448)
    DpShMCreate: sizeof (wp_ca_adm) 64 000 (64)
    DpShMCreate: sizeof (appc_ca_adm) 64 000 (64)
    DpCommTableSize: max / headSize / ftSize / tableSize = 500/16/584064/584080
    DpShMCreate: sizeof (comm_adm) 584 080 (1144)
    DpSlockTableSize: max / headSize / ftSize / fiSize / tableSize = 0/0/0/0/0
    DpShMCreate: sizeof (slock_adm) 0 (104)
    DpFileTableSize: max / headSize / ftSize / tableSize = 0/0/0/0
    DpShMCreate: sizeof (file_adm) 0 (80)
    DpShMCreate: sizeof (vmc_adm) 0 (2152)
    DpShMCreate: sizeof (wall_adm) (41664/36752/64/192)
    DpShMCreate: sizeof (gw_adm) 48
    DpShMCreate: sizeof (j2ee_adm) 3952
    DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000035B0050, size: 6357408)
    DpShMCreate: sys_adm allocated at 00000000035B0060
    DpShMCreate: wp_adm_list allocated at 00000000035B3040
    DpShMCreate: wp_adm allocated at 00000000035B3230
    DpShMCreate: tm_adm_list allocated at 00000000035BAE10
    DpShMCreate: tm_adm allocated at 00000000035BAE60
    DpShMCreate: wp_ca_adm allocated at 0000000003AFDD70
    DpShMCreate: appc_ca_adm allocated at 0000000003B0D780
    DpShMCreate: comm_adm allocated at 0000000003B1D190
    DpShMCreate: system runs without Slock table
    DpShMCreate: system runs without file table
    DpShMCreate: vmc_adm_list allocated at 0000000003BABB30
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: gw_adm allocated at 0000000003BABBE0
    DpShMCreate: j2ee_adm allocated at 0000000003BABC20
    DpShMCreate: ca_info allocated at 0000000003BACBA0
    DpShMCreate: wall_adm allocated at 0000000003BACC30
    DpCommAttachTable: comm attached table (header = 0000000003B1D190/ft 0000000003B1D1A0 =)
    DpSysAdmIntInit: initialize sys_adm
    rdisp / test_roll: roll strategy is DP_NORMAL_ROLL
    check day token not active (5 tokens)
    MBUF OFF state
    DpCommInitTable: init table for 500 entries
    DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
    rdisp / queue_size_check_value: -> on, 50,30,40,500,50,500,80
    EmInit: MmSetImplementation (2).
    MM global diagnostic options set: 0
    <ES> Client 0 initializing ....
    <ES> InitFreeList
    <ES> Block size is 4096 kByte.
    Using Implementation View
    Using <EsNT> view memory model.
    <EsNT> Memory Reset disabled the default NT
    ERROR => <EsNT> CreateFileMapping name = Global \ ES_SEG_01_000, size = 2044 MB, error = 1455 [esnti.c 1276]
    Memory diagnostic *
    SystemInformation
    Processor-Typ: Processor-Count: 4
    Operating System: NT 6.0, Build 6002
    Service Pack: Service Pack 2
    NT Pagefile Informations
    Config. minimum size: 0 K
    Config. maximum size: 0 K
    Avail. maximum size: 0 K
    A
    Pagefile
    Min.Size
    Max.Size
    Avail.Max
    Curr.Size
    NT Task Manager Informations
    Total Handles: 4096
    Total Threads: 0
    Total Processes: 10
    Commit Charge Total: 0 K
    Commit Charge Limit: 1749755472 K
    Commit Charge Peak: 0 K
    Phys.Memory Total: 1749210804 K
    Phys.Memory Available: 0 K
    File Cache: 54 K
    Kernel Memory Total: 0 K
    Kernel Memory Paged: 0 K
    Kernel Memory Nonpaged: 0 K
    Memory usage of current process
    Virt.address Total space: 0000008589934464 K
    Avail.virt.address space: 0000008589004628 K
    Private Pages: 0 K
    Total heap size: 14411 K
    Virtual memory regions: 36 K
    Uncommitted heap memory: 7792 K
    Allocated heap memory: 6390 K
    Moveable heap memory: 0 K
    DDE shared heap memory: 3125 K
    Memory usage of all processes
    PID
    Image
    Instance
    Work.Set
    WAS Peak
    Priv.Pages
    PP Peak
    Pg Fault
    13236
    sapstartsrv.exe
    94832 K
    95576 K
    119092 K
    176464 K
    1101
    14464
    msg_server.EXE
    [MS] CRD_00
    13300 K
    13320 K
    15448 K
    15536 ​​K
    3
    14632
    disp + work.EXE
    [SD] CRD_00
    178976 K
    178976 K
    100204 K
    103312 K
    43
    14452
    igswd.EXE
    [**] CRD_00
    6008 K
    6040 K
    4172 K
    7212 K
    1
    11628
    igsmux.exe
    16012 K
    16012 K
    19736 K
    19736 K
    3
    14720
    igspw.exe
    36928 K
    36928 K
    39976 K
    40376 K
    11
    14532
    igspw.exe
    36180 K
    36180 K
    39220 K
    39620 K
    12
    14384
    gwrd.EXE
    [GW] CRD_00
    16580 K
    16600 K
    15680 K
    21676 K
    4
    11612
    icman.EXE
    [**] CRD_00
    106700 K
    106708 K
    109724 K
    111824 K
    26
    12220
    disp + work.EXE
    [WP] CRD_00
    172264 K
    175308 K
    180652 K
    180652 K
    108
    13620
    disp + work.EXE
    [WP] CRD_00
    195132 K
    260164 K
    138844 K
    162816 K
    169
    12884
    disp + work.EXE
    [WP] CRD_00
    109204 K
    169228 K
    130508 K
    143268 K
    90
    7976
    disp + work.EXE
    [WP] CRD_00
    118696 K
    152260 K
    131956 K
    163248 K
    94
    13352
    disp + work.EXE
    [WP] CRD_00
    90176 K
    94072 K
    123736 K
    126148 K
    29
    14736
    disp + work.EXE
    [WP] CRD_00
    101052 K
    183384 K
    126848 K
    198328 K
    98
    13984
    disp + work.EXE
    [WP] CRD_00
    78400 K
    79660 K
    118712 K
    122304 K
    23
    10540
    disp + work.EXE
    [WP] CRD_00
    74176 K
    75556 K
    117032 K
    122304 K
    22
    9756
    disp + work.EXE
    [WP] CRD_00
    68800 K
    70104 K
    119116 K
    122308 K
    20
    14664
    disp + work.EXE
    [WP] CRD_00
    67660 K
    68504 K
    119588 K
    122308 K
    21
    9980
    disp + work.EXE
    [WP] CRD_00
    83952 K
    84376 K
    117100 K
    122268 K
    24
    13556
    disp + work.EXE
    [WP] CRD_00
    56436 K
    56472 K
    114772 K
    122276 K
    17
    14672
    disp + work.EXE
    [WP] CRD_00
    129136 K
    131320 K
    124356 K
    129668 K
    76
    1352
    disp + work.EXE
    [WP] CRD_00
    70916 K
    72192 K
    120832 K
    122264 K
    22
    13632
    disp + work.EXE
    [WP] CRD_00
    76116 K
    77592 K
    121300 K
    122276 K
    23
    11784
    disp + work.EXE
    [WP] CRD_00
    52516 K
    52536 K
    115316 K
    122264 K
    16
    10580
    disp + work.EXE
    [WP] CRD_00
    82100 K
    82136 K
    115872 K
    122268 K
    23
    12872
    disp + work.EXE
    [WP] CRD_00
    52548 K
    52568 K
    115380 K
    122264 K
    16
    13732
    disp + work.EXE
    [WP] CRD_00
    62384 K
    62824 K
    117464 K
    122264 K
    21
    11824
    disp + work.EXE
    [WP] CRD_00
    52460 K
    52480 K
    115408 K
    122264 K
    16
    4668
    msg_server.EXE
    [MS] CRD_01
    14168 K
    14168 K
    15048 K
    15052 K
    3
    3332
    disp + work.EXE
    44684 K
    44684 K
    74600 K
    82528 K
    10
    Sum
    2358492 K 3037692 K
    **** Error 11 while initializing OS dependent part.*
    **** ERROR => DpEmInit: EmInit (1) [dpxxdisp.c 10428]*
    **** ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 10342]*
    **** DP_FATAL_ERROR => DpSapEnvInit: DpMemInit*
    *DISPATCH EMERGENCY SHUTDOWN *** ****
    Increase TraceLevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd = 1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Dec 25 11:11:58 2011
    NiISelect: occured TIMEOUT (10000ms)
    dump system status
    Workprocess Table (long) Sun Dec 25 13:11:58 2011
    ========================
    In Type Pid Status Cause Start Err RSTR No Time Program Cl User Action Table
    Dispatcher Queue Statistics Sun Dec 25 13:11:58 2011
    ===========================
    --------++++ -
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++ -
    +
    NOWP
    0
    0
    2000
    0
    0
    --------++++ -
    +
    DAY
    0
    0
    2000
    0
    0
    --------++++ -
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++ -
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++ -
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++ -
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++ -
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++ -
    +
    max_rq_id 0
    wake_evt_udp_now 0
    wake events total 0, udp 0 (0%), shm 0 (0%)
    since last update total 0, udp 0 (0%), shm 0 (0%)
    Dump of tm_adm structure: Sun Dec 25 13:11:58 2011
    =========================
    Term uid man user term lastop mod wp ta a / i (modes)
    Workprocess Comm. Area Blocks Sun Dec 25 13:11:58 2011
    =============================
    Slots: 1000, Used: 0 Max: 0
    --------++--
    +
    Id
    owner
    pid
    eyecatcher
    --------++--
    +
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd = 1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Dec 25 11:12:03 2011
    NiISelect: occured TIMEOUT (5000ms)
    DpHalt: shutdown server> fhsrv011_CRD_01 <(normal)
    DpJ2eeDisableRestart
    DpHalt: Switch off Shared memory profiling
    ShmProtect (57, 3)
    ShmProtect (SHM_PROFILE, SHM_PROT_RW
    ShmProtect (57, 1)
    ShmProtect (SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    DpHalt: stop work processes
    DpHalt: Terminate gui connections
    DpHalt: wait for end of work processes
    DpHalt: not attached to the message server
    DpHalt: EM cleanup
    EsCleanup ()
    EsCleanup ....
    EmCleanup () -> 0
    Es2Cleanup: Cleanup ES2
    LOG Q05 => DpHalt, DPStop (3332) [dpxxdisp.c 11252]
    DpHalt: Good Bye .....
    trc file: "dev_ms", trc level: 1, release: "720"
    [Thr 5176] Sun Dec 25 11:11:41 2011
    [Thr 5176] ms / http_max_clients = 500 -> 500
    [Thr 5176] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
    systemid 562 (PC with Windows NT)
    RELN 7200
    patchlevel 0
    patchno 92
    intno 20020600
    make multithreaded, Unicode, 64 bit, optimized
    pid 4668

    Hi Michael,
    even if the guides are very detailed in the procedure itself they don't show a dependency between components. I was now browsing and reading to roughly 600 pages of SAP documentation, Wikis, Upgrade guides, EHPI guides etc. and I'm still not clear. According to the guides it is necessary to set up SolMan using Landscape Verification to get the system details right and then use MOPZ.
    As always when it comes to dependencies it's very confusing from a technical perspective to make a clear statement.
    As a German (speaking) company we would have to do several things:
    - map the used "Business process" to SAP terminology
    - translate that terminology from SAP-German to SAP-English
    - use MOPZ to find out a dependency (or none)
    And even then - for my understanding this is all way to complex and intransparent to just find out a "dependency". I will certainly not upgrade SolMan, install LV on Solman with some dozen notes to just find out, whether it may be necessary to upgrade to EHP5 or not. There has to be a different/documented way in finding that information, even if that means opening OSS calls and insisting someone to give a clear statement.
    I don't consent setting up a tool and invest time (and hence money) to configure that tool to get information (note: we're not talking about the upgrade itself, just about preparation). The complexity and integration of the components is SAP made, not customer made, and therefore SAP has to give that information, not telling customers to mess with yet-another-complex tool (SolMan).
    It shouldn't be too difficult to say that component SAP_CRM 702 needs an SAP_APPL 605 or not.
    Just my EUR 0.02.
    Markus

  • Copy new attributes in new releases

    Could you please provide detailed steps using WCF_CC or manual process of new attributes in CRM 7.0 EhP1?
    I'm working on message in UI Configuration check in WCF_CC which states,
    "Context node Attribute does not exist: STRUCT.ZZFIELD in Object type BP_ACCOUNT, Subobject Type ZZI5EEWCONTACT Role Config key <DEFAULT>, Component Usage <DEFAULT>"
    Selecting the edit button directed to UI Config Tool where I could see the missing attibute in the custom configuration which saved newly in a customizing request.
    Recheck on the UI Configuration for the view resulted with a new error which is,
    "Error during check of component BP_EEW view Runtime Repository"
    Edit button selection here states "Action not supported".
    Please help with procedures to resolve these errors. Thanks.
    NOTE: Re: Copy New Attributes in Enhanced components in new releases.
    Edited by: crmdevelopers on Jan 24, 2012 11:49 PM

    Could you please provide detailed steps using WCF_CC or manual process of new attributes in CRM 7.0 EhP1?
    I'm working on message in UI Configuration check in WCF_CC which states,
    "Context node Attribute does not exist: STRUCT.ZZFIELD in Object type BP_ACCOUNT, Subobject Type ZZI5EEWCONTACT Role Config key <DEFAULT>, Component Usage <DEFAULT>"
    Selecting the edit button directed to UI Config Tool where I could see the missing attibute in the custom configuration which saved newly in a customizing request.
    Recheck on the UI Configuration for the view resulted with a new error which is,
    "Error during check of component BP_EEW view Runtime Repository"
    Edit button selection here states "Action not supported".
    Please help with procedures to resolve these errors. Thanks.

  • NWDI in SAP EHP1 for NW 7.3

    Hi All,
    I am new to NWDI concept.
    Can any one provide me the step by step process for NWDI in EHP1 for NW 7.3.
    I am having the doc for 7.x but this not explains the process correctly.
    When I do so it is asking for more configuration.
    Please let me know the DOC start from SLD config.
    Regards
    R.Prakash

    Hi All,
    Please let me know the steps I followed is right:
    1. http://<host>:50000/sld/ -> Set up the SLD and it started running.
    2.http://<host>:50000/sld/fun -> Enabled the "CM services","NWDI using CMS" and NWDI using CM services - recommended","SLD" and "service Registry".
    3. http://<host>:50000/nwa -> configuration->scenarios->Config Wizard
    and tried to run the "DI CMS - create application skeleton" but I am getting error as
    "Error: unknown exception: Cannot find software component release (Vendor/Name/Release valenet.net/MYCOMPONENTS/1.0) in CMS. UpdateCMS Server or/and check SLD component content.Error: unknown exception: Cannot find software component release (Vendor/Name/Release valenet.net/MYCOMPONENTS/1.0) in CMS. UpdateCMS Server or/and check SLD component content."
    same error I am getting when running "Integration of MII with existing NWDI".
    I guess the information filled in the create track is wrong. Can any one tell me the step I followed is right and also where can I get the information about the Software Components?
    Regards
    R.P

Maybe you are looking for