Release of History from Info Cube to Planning Area

Hi Experts,
I am using program /SAPAPO/RTSINPUT_CUBE to load sales history data from Info Cube to Planning area. Most of the data gets loaded but for few CVCs we get following message: -
549 combinationens of InfoCube are not contained in the BasisPlobStru
While checking up these CVCs in transaction /SAPAPO/MC62 and Planning Book I can see that these CVC exist and data is also visible.
Could anyone please help me out with the reason and what should be done to encounter this.
Thanks in Advance.
Thanks and Regards,
Chandan

hi Chandan,
First of sincere apologies for not having read the query completely.
regarding your query on 549 combinationens of InfoCube are not contained in the BasisPlobStru, as you have stated that the CVCs exist in the MPOS.
But can you please check if the CVCs maintained in the MPOS are the exact CVCs that are mentioned in the messgae. For example, the message is for location product sales org Country. Can you check if the CVC exists for this combination for which the forecast is being loaded from the source? For example it is possible that data is being loaded for Loc1 Prod1 SalesOrg1 Country1, but the CVC exists for Loc1 Prod1 SalesOrg2 Country1, then such message appears.
So can you check if the exact CVCs are exisitng in the MPOS as indicated in the messages?
Rgds, Sandeep
Sorry again for misreading on your query.

Similar Messages

  • I need format for data in excel file load into info cube to planning area.

    Hi gurus,
    I need format for data in excel file load into info cube to planning area.
    can you send me what should i maintain header
    i have knowledge on like
    plant,location,customer,product,history qty,calander
    100,delhi,suresh,nokia,250,2011211
    if it is  right or wrong can u explain  and send me about excel file format.
    babu

    Hi Babu,
    The file format should be same as you want to upload. The sequence of File format should be same communication structure.
    Like,
    Initial columns with Characteristics (ex: plant,location,customer,product)
    date column (check for data format) (ex: calander)
    Last columsn with Key figures (history qty)
    Hope this helps.
    Regards,
    Nawanit

  • Load from cube to planning area

    Hi,
    We are facing a problem in loading data from Cube to planning area, we need to distinguish between the Zero and the blank values in planning area when loading data from cube to planning area.
    Scenario is like this.
    For a CVC u2013A on day D I am having key figure value as blank and on D1 is Zero and on D2 is 2, I want the same to appear as my planning area data If I load this data to cube my day D value will appear as Zero  (but it was blank) and on D1 Zero and on D2 as 2 in cube.
    I am using Std T-code /SAPAPAO/TSCUBE to load data from cube to planning area, in std T-code we are having option of ignore Zero, if I use this it will also stops the actual zero value(which I need) on day D+1 to come in to planning area which I donu2019t want.
    I want my planning area data to be as blank on day D and Zero on D1 and 2 on D2 after loading data from cube to planning area..
    Can any one put some light and help me out from this issue.
    With regards,
    Sreerama

    Hi Seerama,
    I am not sure to understand completely the issue: do you have an issue in the cube or in the planning area?
    In order to differentiate a blank for a zero in the planning area, you need to set the flag "zero allowed" in the planning area settings. (in the tab keyfigure, click details, then for each key figure you can select or not the flag "zero allowed")
    When you load the data, you should indeed not flag "ignore zero value"
    If the issue you have is in your cube (between the file and the cube) then it is another matter...
    Kind Regards,
    Julien

  • Report to display (actuals data from one cube and plan from another)

    Hi Gurus,
             I have a requirement in reporting to display actual data from one cube and plan data from a different one.
            The example below might give a clear picture of the requirement.
    rows has key figures and columns = months
    Jan |  Feb |  Mar |  Apr |  May |  Jun  ...   ....
    GrossSales
    Net Sales   
    Now if I run the report for Current month (Apr), then for the months of (Jan, Feb and Mar) i need to get the data from CUBE1   and for the remaining months (Apr thru Dec) from CUBE2.
    Similarly when i run the report next month(may), 
    then (data for Jan, Feb, Mar, Apr  from CUBE1)
    and ( May thru Dec from CUBE2)
    Any suggestions.
    Thanks in Advance
    Kumar

    Hi Henry,
         We alreadey have a multi provider which includes
    FinDat Cube(CUBE1) for actuals and Comm.Goals cube (CUBE2) for plan.
    So you suggest that we have two versions of key figure for actual and plan.
    ie. each KF will have two versions.
    actuals = (version 10, FiscPer<curr.mnth, key figure, acutals cube)
    Plan = (version 20, FiscPer>=curr.mnth, key figure, comm.goals cube)
    eg:
    Jan | Feb | Mar | Apr | May | Jun ...
    GrossSales(Act)
    GrossSlaes(Plan)
    Net Sales(Acutal)
    Net Sales(Plan)
    Correct me if I am wrong.
    the report has a lot of key figures, having two versions for each kf will be confusing.
    the user would like to see
    Jan.....| ...Feb  |..Mar |..Apr.....|  May  | 
    GrossSales   Act Value|Act.V |Act.V| PlanVal|PlanVal|
    Net Sales
    where Act.Value is from CUBE1
             Plan Value is from CUBE2
    Thanks
    Kumar

  • How to extract data from info cube into an internal table using ABAP code

    HI
    Can Anyone plz suggest me
    How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
    Thankx in advance
    regds
    AJAY

    HI Dinesh,
    Thankq for ur reply
    but i ahve already tried to use the function module.
    When I try to Use the function module RSDRI_INFOPOV_READ
    I get an information message "ERROR GENERATION TEST FRAME".
    can U plz tell me what could be the problem
    Bye
    AJAY

  • Loading data from Info cube to PA

    Hi All,
    I am trying to load the CVC from Infocube to Planning Area in Development environment.
    I am getting error message for mismatch of periodicity of infocube and Planning Area.
    how to resolve this. Where do we define the periodicty of infocube ? I don't think so ?
    Please help me
    Thanks a lot
    Prabhat Sahay

    Prabhat,
    I understand that you already have the data in the infocube and want to load it into the planning area.
    However it is important to ensure that the data in the cube and the planning area have the same periodicity failing which we will run into such issues.
    So pls go back to the step of defining the infocube.
    In RSA1 if you double click on the infocube name which you are using as source, you can see the details in the right. In that, look for the dimensions section, under that look for the time section. If that contains a calweek or a calmonth and you are using a fiscal variant, this issue occurs.
    You have to drop your infocube data, redefine the cube to use FISCAL PERIOD and FISCAL VARNT instead of calweek or calmonth and then load the data back again. You need to ensure you populate the fields FISCAL PERIOD and FISCAL VARNT. You might want to do that with routines in your update rules or your infosource communication structure. REmember to activate the entire structure from cube to data source.
    Once you load the data into the cube with the new setting, and then try to copy the data into planning area, it will be successful.
    To answer your other question. Yes Time Characteristics is necessary for loading data between cube and planning area.
    Hope this helps.
    Thanks
    Mani Suresh

  • Load data from infocube to DP planning area

    Hi All,
    I have loaded the data from info cube to DP planning area keyfigures with the transaction /SAPAPO/TSCUBE.
    the data copy was successful and there were no error messages. However, the keyfigure values in planning book are shown exactly as double the values of infocube key figures for all the periods.
    I repeatedly loaded data several times and the behaviour was same.
    We didn't implement any BADI in standrad /SAPAPO/TSCUBE program.
    Could any one please give some hints what would be the reasons for this problem.
    Thanks
    Krish

    I am not sure on how you check the Live Cache data for DP but based on your testing I can say that the old data is not overwritten by the new data in the Live cache. I cannot say the root cause for this however I can suggest you the remedy. To avoid this issue, you zero out the values of the key figure before loading from the Cube.
    For this you have to run a macro which copies zero for the entire horizon and then load the cube. First test this in test system, if it works (it should work), then to make it simple create a batch job with two steps, first step would run this macro and the second step will load the data from cube. you can run this job whenever you want to load the data

  • Error /SAPAPO/TSM 041 when loading from InfoCube to SNP planning area

    I am using APO V5.1.
    I have a 'backup' InfoCube with characteristics 9ARNAME and 9AVERSION which I'm loading to an SNP planning area via trans /SAPAPO/TSCUBE. The InfoCube is itself populated from the 9ARE aggregate of the SNP planning area.
    But I get error /SAPAPO/TSM 041when I run the load, suggesting absence of a required characteristic or navigation attribute in the Cube. Do I need 9ALOCNO for instance?
    Can anyone advise me here?...

    Hi,
    I am not very sure about the 9ARE aggregate (haven't used it in backups), but RTSCUBE is used to copy time Series (TS) KF data from cube to planning area (SNP or DP).
    Are you trying to restore some time series data from your backup cube to the planning area? If yes, then do a mapping of characteristic from cube to planning area in RTSCUBE, and also map the TS KF between cube and planning area.
    If your KF is not a time series KF, then you can't copy it from cube to planning area. You could get data to cube for some reporting, otherwise I am not sure what use the backup is for you. For SNP, most of the data would be received from R/3, so there's not much point in having a backup.
    Hope this helps.
    Thanks - Pawan

  • Release DP- SNP Can't choose target Planning Area rather than 9ASNP02

    Hi SAP Expert,
    I tried to release from DP to SNP with TCode: SAPAPO/MC90 Rlease Demand Planning to Supply Network Planning.
    When I press button: "Release: Extended" --> In "Target Version" area, system display one more  parameter: "Planning Area". But it selects Planning Area "9ASNP02" as fix value. We could not choose any other.
    Actually, because I need to work in my own created Planning Area in SNP, (let's call "Z_9ASNP02") so that created it by coppying from the Standard Planning Area "9ASNP02". Now I want to release DP to my own Planning Area "Z_9ASNP02", not 9ASNP02.
    Please show me the solution for this problem.
    Thanks very much for your help!
    Duyennx

    When you release forecast from DP to SNP, planning area does not matter anyways. The release transaction creates orders in order livecache from the time series key figures in DP planning area. Order livecache is only version specific. Once you create an order in version 000, you can view that order in any planning area that is initialized in version 000.
    So, you dont really have to specify the planning area when you release from DP to SNP. 'Release extended' helps you map a key figure in DP to a key figure in SNP without worrying about the order category. In other words, It only shields you from selecting order categories. If you know which order category you want use, you should use the standard release instead of 'Release Extended'.
    Even if you dont want to use the standard release, you can continue using 'Release : Extended'. Even though the planning area is hard coded as 9ASNP02, you will be able to see data that you release in your planning area Z_9ASNP02, provided you have some key figure in Z_9ASNP02 mapped to order category.
    Hope that helps.

  • RE : BI APO Question Reg Data feeding from cube to Planning area.

    Hi BW Experts,
    iam working in an Implementation project for SCM in BW prcisely working with APO Bw..
    For that I have taken historical data as a flat file and loaded it in to the external BW Infocube and its fine...
    Second step I have created generate export datasource on topr of BW infocube and replicated in to Bw and used this export datasource as datasource for APO BW Infocube which is inbulit BW System from External Bw..
    also I have created tranformations and data is loaded in the BW cube in APO system.Also Included Version charecterstics..
    When I try to fed the APO Cube data to planning area Iam gettinga the following  warning itsnot an error:
    1.Key figure copy: InfoCube - planning area (DP) 01.01.2010 to 31.12.2010-- Successful
    *2.No data exists for the selection made (see long text*
      Diagnosis:Data could not be loaded from the Cube for the selection you made. Check whether the Cube actually contains data that is relevant for your selection.
    For the second point I have time charecterstics filled in the infocube which Iam feding to a Planning area like 0CALMONTH,0CALWEEK,FiscVarnt,0CALMONTH
    3.Characteristic assignment: No data copied --- Message
    Can you please help me with your thoughts so that i wll try to corner the issue I will be highly obliged

    Hi,
    As I understood, you have loaded data from external BW cube to APO BW cube and now loading planning area from APO BW cube.
    I hope your settings in /SAPAPO/TSCUBE transaction code would be correct and you have selected the correct planning version with correct cube.
    Check if Data in APO BW cube is available for reporting or not and data is avilable for given selction (if any but I guess you are not giving any).
    Thanks,
    S

  • Loading data from cube to Planning Area - Error

    I have two cubes. one has history data and other ratios.
    the forecast is dis aggregated based on that ratios.
    first the ratio data is getting loaded and gets populated.
    when i try to load the history data, a error says, CVC not maintained.
    there are totally 6 Char used in this Config.
    MPOS is created using the ratio cube and has the same char as in history cube, additionally one more sub family.
    Can some one help me in this.??
    Thanks !!!

    hi
    char in hist cube           
    mkt fam                           
    mkt seg                           
    regn                                
    gobl                                
    cntry 
    Char in the MPOS(from Ratio cube)
    mkt fam                           
    mkt seg                           
    regn                                
    gobl                                
    cntry 
    sub family                           
    the main obj of not including it in hist cube, i forecast @ mktfam level n dis aggre to sub family.
    if i include the sub family also in hist cube, then i can forecast @ sub family itself..
    the whole dis agg. logic does not serve the purpose.
    On the Adjustment of Time series, will try it n revert n back.
    like can you please tell me how it affects the process???? or the logic behind doing this????
    Thanks!!!
    Edited by: Aswath ram on Sep 10, 2008 6:33 PM

  • Loading data from Cube to Planning area

    Hi,
             If I am loading data from a cube to a planning area using transaction TSCUBE,
    does the system load data into planning area for the combinations that exist in the cube or does it load for all CVCs?
    For example,
    I have my CVC as Plant, Material, Customer
    If there are 4 CVCs in the POS that were previously generated as
    Plant--Material--Customer
    01--M1--
    C1
    01--M2--
    C3
    01--M2--
    C2
    01--M4--
    C5
    If the cube has data like this:
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    01--M2C3--
    20
    01--M2C2--
    5
    (doesnot have the last combination), then if I use TSCUBE transaction to load data to Planning area from this cube,
    is the data loaded as
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    01--M2C3--
    20
    01--M2C2--
    5
    Only for the 3 combinations that exist in the cube and not load anything for the last one
    OR
    is the data loaded as
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    01--M2C3--
    20
    01--M2C2--
    5
    01--M4C5--
    0
    Load all 4 combinations and send 0 as the cube doesnot have this combination?
    Hope I am clear on this question.
    Thanks.

    Thanks a lot Vinod, Srinivas and Harish. The reason why I am asking you is that we have a scenario where we get this situation.
    We initially get data from R/3 to BW to APO like the below:
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    Later when the customer is changed or bought out by somebody C1 is changed to C2. Some times when the business doesnot know who the customer is initially they just put C1 as dummy and then after sometime replace it by C2. Then the new record coming in is as follows:
    Plant--MaterialCustomer----Qty.
    01--M1C2--
    10
    BW can identify changes in transaction data  but not in Master data. What I mean by this is when Qty. 10 changes from 10 to 20, the system can identify it in deltas.
    If the customer (master data) changes to C2 from C1, the system thinks it's a new record all together then if I use delta loads, it gets me the following:
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    01--M1C2--
    10
    If I am looking at Plant and Material Level, my data is doubled.
    So we are planning to do a full load that works like this:
    1. Initial data like the below:
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    10
    The CVC is created and the planning area has Qty.10
    Then we delete the contents of cube and do a full load into the cube with changed customer
    Plant--MaterialCustomer----Qty.
    01--M1C2--
    10
    This time a new CVC is created. Then we have another 10 loaded into Planning area.
    If the system loads all CVCs, then the it would send
    Plant--MaterialCustomer----Qty.
    01--M1C1--
    0
    01--M1C1--
    10
    If the system loads only combinations in cube,
    then it loads
    Plant--MaterialCustomer----Qty.
    01--M1C2--
    10
    But the system already has another 10 for Customer C1 duplicating the values.
    We are trouble in the second case.
    We had to go fr this solution instead of realignment as our business has no way pf knowing that C1 was replaced by C2.
    Hope I am clear.

  • Deleting the latest request from info cube.

    Hi All,
    In our project, we have data from May 2012 to till date. Data is freezed and there is no change of data till May 2014. And there is change in data for current month only ie) June 2014. So i have pulled the full load from May 2012 to May 2014 and loaded in the Info cube.
    I am deleting the current month data and loading only the current month data to Info Cube. So i want to delete the current request in the info cube before loading and load only the current month data.
    Can you pls guide me how to achieve this through Process chain. I am unable to identify which process type will suit my requirement.
    Thanks.

    Hello Vincent,
    As mentioned by you, that there is no change in data from May 2012 to May 2014, you can keep the request which contains this data(for Example Req1). If Request2 contains data from May 2012 to June 2014 then you need to delete this request i.e Req2 and load only data for June 2014. Later you can follow below mentioned process.
    Now coming to option which you are looking for process type to achieve this via process chain, there is a process variant called "Delete Overlapping Request", which is used to delete data from the target based on certain condition depending requirement.
    Hope this resolves your issue. Below document explains steps to achieve the same.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0431c48-5ba4-2c10-eab6-fc91a5fc2719?quicklink=index&…
    Best Regards,
    Venu Gopal K

  • Steps involved in Selective Deletion of Data from Info Cube

    Please search...this is much discussed in different threads out here
    Hi Experts
    I shall be greatful if you can updated me with the detail steps involved in Selective Data Deletion from a Info Cube....as i need to delete data selectively from a Infocube in LIVE system...so there is no second chance for me..
    Please update in detail
    Thanks in advance
    Edited by: Moderator

    Not sure how you were searching, but did you come across any of these...
    https://forums.sdn.sap.com/search.jspa?threadID=&q=selective+deletion&objID=f131&dateRange=all&numResults=15

  • Delete overlapping requests from info cube

    Hello
    I am getting a issue sometimes where the process chain fails to delete a request from the cube on the conditions i have given in this process type. Now i have been digging into this but cannot find much of why would this happen.
    Please can someone tell me if this is a known issue to you. Also please can someone give me some details on which program name gets generated when we pull this process type in a  process chain. what i mean is what is the program running for this process chain as i want to debug and see how does this process type delete the request.
    thanks

    check the class CL_RSSM_REQUDEL and method IF_RSPC_EXECUTE~EXECUTE

Maybe you are looking for