Release orders against contract 4600000069 not possible (contract not relea

Hai,
I had created a contract and had a release procedure for it.
I had released the contract using ME35k.
When i try to raise a p.o agaist the contract i am getting the error as "Release orders against contract 4600000069 not possible (contract not released)"
What could be the problem and solution for the above error message.
Thanks
Hari.

Bijay Kumar Barik wrote:
Hi,
>
> Error clearly says, contract not released. Release order can be created against contract ,if contract is released.Check=> you may used ME35K to release the contract , but after releasing with releases code, you have not saved the release .Just do use again ME35K to release the contract with release code & save.
>
> NOTE:
> Also check how many levels of release is there for contract and check all levels of release with respective release codes is done or not before creating release order WRT contract.
>
> Regards,
> Biju K
I had released and saved for all the levels i.e for all the release codes.
Still it is behaving the same.
I have not used any ref purchase org as mentioned above in one of replies.

Similar Messages

  • Admission Audit Run (Action is not possible; function not released yet)

    Hi All,
    I have created a Requirement Profile Template for admission audit and attached it with a program of study.
    But when I am trying to run the admission audit using Transaction PIQAUD_MP_CS, its giving a message that...
    Action is not possible; function not released yet....
    Please tell me what does this message indicate, please let me know if u need more information regarding it.
    Thanks in Advance
    Sudhir Gupta

    Dear Michael,
    Thanks for such a beautiful and elaborative answer. Please read my comments on the points you discussed :
    Create an admissions record: at this time a requirement profile is automatically generated for the program of study, as long as your program has been defined as 'Use Assessments'.
    Yes its generating a requirement profile automatically as soon as admission record is created.
    In the student file, go to the admissions tab and look for the icon that represents 'Audit Details'. (It looks like the icon for 'syntax check' in ABAP). Click on that.
    On Clicking 'Audit Details' icon it leads to another screen which contains all information like Admission application data but requirements section is blank.
    Now you are taken to a screen where you can see the admissions audit profile for the student. Execute the audit there, and you will see the list of checkboxes and results.
    The requirement screen is blank. No error message.
    Though i maintained the Requirement Profiles and RPT as per Cookbooks.
    I want to download the screen shots of Requirement Profiles and RPT. Please let me know how to upload screen shots in SDN.
    Warm Regards
    Vinod Kumar

  • Account assignment not possible (Asset not assigned to a business area)

    HI
    While posting an asset acquisition through F-90 by entering Business area, doc.type AA,TT-100,PK-70, i am getting the error messege AA483 - "Account assignment not possible (Asset not assigned to a business area)".
    I have correctly created asset master and assigned Business area and Cost centre.
    And i am not getting any problem in another company code for same asset class.
    Please suggest
    Bhanu Prakash

    Hello
    Assets are assigned to a single business area in their master record. Every posting to an asset balance sheet account is automatically posted to that business area. The business area for an asset is passed on to all line items connected with the asset. Therefore you do not need to make a manual account assignment for a business area at any point.
    http://help.sap.com/erp2005_ehp_02/helpdata/en/5f/1fac7c4aee11d189740000e8322d00/frameset.htm
    Check the info on the link please
    Reg
    assign points if useful

  • Account assignment not possible - item not yet calculated

    Dear SAP Gurus,
    While creating the Shipment Cost Document I am receiving following error.
    Account assignment not possible - item not yet calculated
    Message no. VY081
    When I double click on the Item to enter the conditions the screen goes blank at the item level. Kindly let me know if there is anything missing.
    Thanks and Rgards,
    Shehryar

    Hi,
    Please check below config.
    LETransportationShipment CostsShipment Cost DocumentShipment Cost Types and Item Categories.
    Hope it helps you
    Rgds,
    Kris.

  • Release orders against contract 4600000002 not possible (contract not relea

    hi all,
    Am trying to create a blanket po from a contract. but obviously, the release strategy i set up for po release has affected the contract created and hence gives the error above.
    how can i over come this challenge please?

    Dear,
    Please check contract release status in ME33K, header - Release strategy. Check all released contract or not. If not do relase with ME35K.
    Regards,
    Syed Hussain.

  • Download Lightroom CC not possible: page not found

    Hi @all,
    I'm trying to download the german version of Lightroom CC but when on this page "Software für digitale Fotografie | Download Adobe Lightroom 6: kostenlos testen" I click on "Testversion" (https://creative.adobe.com/de/products/de/download/lightroom) and the following page is not loaded. Instead it says "page not found". Any ideas?
    Edit: Problem only occurs when using firefox (37.0.2). Download with the IE worked.

    In order to install Lightroom cc , you need to install it via Creative Cloud desktop app :
    If you are getting page not found error , try with below links ,.
    WINDOWS:
    Click on the below link and download Creative Cloud setup file and use the same to install the Creative Cloud Desktop application.
    https://ccmdls.adobe.com/AdobeProducts/KCCC/1/win32/CreativeCloudSet-Up.exe
    MAC:
    Click on the below link and download Creative Cloud Installer file and use the same to install the Creative Cloud Desktop application.
    https://ccmdls.adobe.com/AdobeProducts/KCCC/1/osx10/CreativeCloudInstaller.dmg
    https://helpx.adobe.com/creative-cloud/help/install-apps.html

  • Release order with reference to Contract.

    Hello all
    Client is using the quantity contract & against that Release order are created ,after changing the contract price, new release order will pick up new price from contract,
    Now the requirement is Old release order(GRN & INVOICE NOT DONE) price should get change as per new contract price. how this will be achieve ( Configuration or z Development)
    Kindly suggest (SAP version is 4.7)
    Also what is Automatic Document adjustment  & how it works?  whether above scenario is possible with automatic document adjustment.
    Thanks & Regards
    Rajesh

    Hi
    Price always come from Purchasing inforecord to the contract release order not from the contract.
    If the contract price is updated thru info update indicator in contract then you will get the latest price from inforecord to contract release order.
    For your old release order if you want to adopt the latest price based on the date then change the price date category as 5-GR date in Purchasing inforecord as well as Contract. If the field is open in PO then you change there also.
    Now if you do the GR the price will be picked based on the GR date from the Purchasing inforecrd condition
    Hope it helps
    Thanks/Karthik

  • Contract and release order for service: connection and field selection

    Hi Experts,
    I have some questions about contract and release order (PO against contarct) for services.
    A -I want ot know if there is any standar way to oblige the creation of a release order to a contract. I mean i had some users  that create a release order w/o reference to the contract and it works fine anyway. The document is a copy of the NB. I cant find the way to reference the 2 purchase document clearly.
    B - Using a release order, when copying the item from contract catalogue by clicking the service selection icon,  description and net price are correctly copied:  the description is not modifiable  but the net price can be change by the user. Can some body explain me where to modify this setting? where is the field selection and where in SPRO step by step please,
    thanks in advance
    Livio

    ... Nobody is so nice to suggest me any solution?  
    For the point A probably the only way is user-exit.... but for B i don't have any idea, please let me know
    thanks
    Livio

  • Differences between Contract Cumulative Value an Release Orderes Value

    Hi All
    I have found differences in:  EKPO (PO Items)  and  EKAB (Release Orders) tables vs. Cumulative Target Contract value.
    The total amount in EKPO net values is grather than Cumulative Target Value in Contract, in EKAB net values as well.
    Do you know the considerations that the system are taking?....because the Cumulative value must not be exceeded
    Thanks for your tiime.
    Regards
    Mauricio

    I have found the issue, the delivery complete indicator restore the Cumulative Amount in Value Contracts (Quantity = 0). After that, a new PO could be created with Agreement link limited for the amount restored.
    So the all PO generated related with the contract could exceed the Cumulative Amount established in contract
    Thatu2019s a problem because All PO could be received even though the delivery complete was activated
    This behavior is only for Value Contracts
    Saludos
    Mauricio

  • Contract's Release Orders

    Dear Gurus,
    How can I know if a certain contract was used in creating a PO.
    Thank you all in advance.

    Display the contract ME33K
    Select one of the line item >>> Click on the Release documentation Icon (looks like Bars ) or press CTRLSHIFTF12
    You will get list of Contract Release order (CRO ) posted
    Contarct and CRO  everything is in EKKO HEader / EKPO Item level table , Differentiated by
    EKKO-BSART
    Purchasing Document Type
    ~~~~~~~~~~~~~~~~Table level Detail
    If you see EKKO-KONNR  (Number of Principal Purchase Agreement) for Contract Release Order this field will contain the contract number from which this CRO is created  ..... ...
    RGS
    SB
    Edited by: Shashank Balooni on Mar 8, 2011 9:20 PM

  • Creation of release order possible during release strategy

    Hi folks,
    we have currently contract and purchase order release strategy parallel in place. Both are working fine.
    We are using quantity and value contracts.
    Quantity contracts are changed frequentely by the business; with every change (adding new items, changing prices of existing items), the release strategy is pulled again.
    Our release indicator is set to 6 and has value change 0,00%.
    The business requirement is now to release a contract with status X (e.g. 10 items and a total item value of 10.000EUR). After release, call offs can be created for all the released line items.
    If a new line item 11 is added, it should still be possible to create call offs for item 1-10 but not for item 11.
    Item 11 should undergo a new release.
    Has anyone ever come across such requirement?
    I have tried version management. However, version management will only force a new release whenever the version is completed.
    Even then, the complete contract is subject to release strategy and it is not possible to create call offs.
    We dont want to set error message ME347 "Release orders against contract xxxx not possible (contract not released)" to warning, as this will allow to always create call offs regardless of the contract  being released or not.
    Any ideas greately appreciated.
    Thanks!!

    I suppose program checks in EKKO whether contract is released,, irrespective of version exist it or not. IF you are able to direct it to EREV, then may be version 0  or ( current  - 1 ) released can be returned.
    Isn't it a special case that your version 0 data is intact in version 1; Even if someone change lines 1 to 10 , with or without adding line 11, it still triggers version 1. How do you ensure that lines up to 10 are not changed. you may have to look in CDPOS CDHDR with object Revision..
    This is  just an idea which you may discuss with your developer to see whether a copy of the program can be modified..

  • Release orders

    HI sap gurus,
    while creating PO i am getting below error .
    Release orders against contract 3000000611 not possible (contract not released
    please explain me
    sarvesh

    Hi,
    Please see if you have any release strategy for Contract.
    It seems you have not released the  contract.
    Hope this helps.
    Regards,
    Amit

  • Vendor block code for release order creation but no purchase order creation

    The client has a vendor block code which when applied to a vendor through vendor block screen should allow release order creations against existing contracts and ARC but it should not allow purchase order creation. However, it is allowing purchase order creation also. Can anyone tell how to achieve this selective treatment that allows RO creation against existing contracts and ARCs' but no PO creation.
    Are there any settings or configurations that have to be made in SPRO and other areas to achieve this.I would appreiate if anyone could give in a detailed and step wise solution.

    Hi
    Take out all the blocks on company code and purchasing organization in XK05.
    Only put block function as 01 (purchase order). It will not allow you to create purchase order but you can create contracts and release orders against contracts.
    Thanks
    Edited by: Praveen Raghavendra on Jan 8, 2009 2:30 PM

  • Release order., reg.,

    Hi guru's can anybody explain what is a release order? is release order possible for scheduling aggrements?
    Thanx in adv
    tulja singh

    HI Singh
    Release orders are POs created refering a Contract. Whenever you have a requirment for material or service you release a PO for the same, when you refer a contract then its a " release order",
    For scheduling agreements you can use Delivery schedules , but not release orders. The main difference between Contract and SA is that Contract involves Generation & Maintainance of Huge voulme of documents, while for SA there is only one further document apart from SA,. this is delivery schedule. When you release a schedule refering a SA no new document will be created but the Schedule will be continully extended as new requirment.
    Cheers!
    Chetan

  • Release Order No

    Hi,
    The requirement is to print Release Order No. or all releases (with reference to Contract), for this any idea in which table this information is available?
    Thanks,

    Thank you Dear,
    The requirement is to put the release order No as 1, 2, 3 (and not 4800000000, 4800000019, ....) etc.  In the above table it will show only the number which we set as number range.
    Any idea.
    Thanks,

Maybe you are looking for

  • Bug: Customizing Convergence banner for a specific domain does not work

    Hi, I'm trying to customize the banner for a specific domain, I was following the steps from the documentation but I found that there is a bug relate: Bug #6749263 And I tried to find if the bug was already resolved in convergence 1.0-7.01 and the se

  • T430 Recovery Disc

    I am in need of the recovery Disc for a Lenovo T430 (QH6-2349) that I've recently purchased. It comes with Win 7 Pro 32 bit, but I would like to run 64bit Windows on it without loosing the "Lenovo" Windows. So, it would help if someone with a similar

  • Has anyone else tried the Skyfire browser?

    So I read in TechCrunch that Skyfire for Symbian 1.5 was available. I downloaded it from my 5530XM and installed it. My first impression was not very favorable. Like Opera Mini, the idea behind Skyfire is to emulate your PC browsing experience, but i

  • Upgrade to iPhoto '11 on Macbook Air from iPhoto on iBook G4 causing viewing problems

    Hi, I was using a iBook G4 with iPhoto quite happily until I decided to upgrade. I had my iPhoto Library on my External Harddrive because it was too big for the onboard memory. I have upgraded to mid 2011 Macbook Air, and attempted to use iPhoto '11,

  • I want to keep date special month and year.

    I want to keep date special month and year. Example in sqlplus insert into area(input_time) values(to_date('MAR-04','MON-YY')); and select select input_time from area; the result 01 MAR 2004 in Oracle 01-MAR-2004 12:00:00 AM I don't keep day, but I w