Release PO Error

When i tried to release the Import PO
I am getting the error....
No posting rules exist for account key G12
Message no. FF714

Hi
I understand that the transaction you are doing is subject to Tax. In calculation procedure TAXINN,
you would have defined various account keys and for each account key you will be assigning the
GL account through OB40. In OB40 check for the account keys where you would have assigned
the GL account without posting key in the Posting key tab. Please alse check the rules.
Its only in OBCN that the data is missing..
Please check again for all the account keys for this particular Tax code in FTXP that posting indicator is maintained in OBCN and confirm..
try this also
check the tax procedure.
Transaction FTXP

Similar Messages

Cannot Release Lock error while Importing mdl file?

Hi,
I am trying to import an mdl file in the test enviroment from the development environment.
No users are working on test environment.
I start importing the mdl file.
Then I got the error as "Cannot Release lock:.
I checked that, no sessions are active and no one is using parallely the owb for testenviroment.
Could anyone explain, why this error came?
Thank you,
Regards,
Gowtham Sen.

Did the instance go down whilst doing this?
Is there more to the log before where you started it?
Cheers
David

Segment release cancellation error

When I attempted to perform "Cancel Release" on segment type ZE1MARAM in ECC6.0, I encountered the following error message: "Error while resetting release of segment ZE1MARAM" I didn't have the problem when I performed the same action in 4.6c. Our Basis team investigated the issue and concluded that this is not a security-related error? Does anybody here have seen this error before? What was the cause and fix?
Thanks,
Ning

Hi,
If you want add a new field..in the menu..segment -> add version..
now you can add a new field...
Thanks
Naren

Oracle 11i release 2 error "Unable to get the current group"

Hi oracle gurus,
I have been trying to install oracle 11g rel 2 on HPUX 11.31 and i am getting the following error
# more installActions2010-01-06_10-27-37AM.log
oracle.install.ivw.db.driver.DBInstaller
-scratchPath
/u01/tmp/OraInstall2010-01-06_10-27-37AM
-sourceLoc
/u01/install/database/install/../stage/products.xml
-sourceType
network
-timestamp
2010-01-06_10-27-37AM
INFO: Loading data from: jar:file:/u01/tmp/OraInstall2010-01-06_10-27-37AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigComma
ndMappings.xml
INFO: Loading beanstore from jar:file:/u01/tmp/OraInstall2010-01-06_10-27-37AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigC
ommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/u01/tmp/OraInstall2010-01-06_10-27-37AM/ext/jlib/installcommons_1.0.0b.jar!/
oracle/install/driver/oui/resource/ConfigCommandMappings.xml
SEVERE: [FATAL] An internal error occurred within cluster verification framework
Unable to get the current group.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:11
INFO: Advice is ABORT
SEVERE: Unconditional Exit
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Database 11g Release 2 Installer
$
>>
# more oraInstall2010-01-06_10-27-37AM.err
---# Begin Stacktrace #---------------------------
ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:11
oracle.cluster.verification.VerificationException: An internal error occurred within cluster verification framework
Unable to get the current group
at oracle.cluster.verification.ClusterVerification.<init>(ClusterVerification.java:200)
at oracle.cluster.verification.ClusterVerification.getInstance(ClusterVerification.java:294)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:407)
at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:126)
at oracle.install.commons.util.Application.startup(Application.java:869)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
---# End Stacktrace #-----------------------------
<<
$ uname -a
HP-UX rx2600 B.11.31 U ia64 <XXXXXXXX> unlimited-user license
# swlist | grep -i oe
HP-Caliper-PERF C.11.31.04 HP Caliper OE Bundle
HP-WDB-DEBUGGER C.11.31.04 HP DEBUGGER OE Bundle
HPUX11i-DC-OE B.11.31.0903 HP-UX Data Center Operating Environment
# swlist | grep -i qpk
QPKBASE B.11.31.0903.334a Base Quality Pack Bundle for HP-UX 11i v3, March 2009
# swlist -l product | grep -i c++
ACXX C.06.20 HP C/aC++ Compiler
C-ANSI-C C.06.20 HP C/aC++ Compiler
PHSS_37501 1.0 aC++ Runtime (IA: A.06.16, PA: A.03.76)
PHSS_39824 1.0 HP C/aC++ Compiler (A.06.23)
i start the installation as oracle and my group and user id is
$ id
uid=109(oracle) gid=102(oinstall) groups=101(dba),104(asmdba)
Please let me know what else do i need, we might have to use the hardware for testing another application so i am limited in terms of time constraints
any help is much appreciated, Thank you!!
Regards,
Dasjith
Edited by: user10247524 on Jan 6, 2010 7:52 AM

Hi Stig Sundqvist
Where can i find MOS Doc 983713.1 ??You have to login https://support.oracle.com/CSP/ui/flash.html and you have to CSI account. This site is oracle site for tech. documents for can rise SR etc.. for more details please check
What is CSI:
Re: Installing Oracle Database 10.2.0.4
And how do i do to fix this problem ????Login metalink then find upper note and follow document
Hope it helps
Regard
Helios

Purchase order Release Stratergy-Error in Class CL01

Purchase Order Release Stratergy:
In CL01(create class) i have created the class FRG_EKKO and saved.Then in CL02(change class) under Basic data-Administrative data we found Assignment field tick is not selected and that is not in changeable mode.
Because of that reason Error occured like Error in Class in SPRO release stratergy. Release is taking place in Development Server but not in Production server.
Regards,
Wilson Babu G

Hi
This indicator shows that objects are assigned to this class.
The indicator is set automatically by the system.
once you assign the class to any objects then this flag will come automatically.
Please check if you have assigned the characteristics to the Class in CL02
Please check if you have assigned the release strategy to the Class in CL24N
Thanks & Regards
Kishore

Transport Release runtime error in BPC Netweaver 10.1

Hi,
We are getting the following error while releasing the transport in SAP BPC NW 10.1 Development system
Category               ABAP Programming Error
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_RSBPCR_INTERNAL_EXCEPTION
ABAP Program           CL_RSBPCR_RES_MANAGER=========CP
Application Component BW-PLA-BPC-INF-WP
Short Text
    An exception has occurred that was not caught.
What happened?
    Exception 'CX_RSBPCR_INTERNAL_EXCEPTION' was raised, but it was not caught
     anywhere along the
    call hierarchy.
    Since exceptions represent error situations, and this error was not
    adequately responded to, ABAP program 'CL_RSBPCR_RES_MANAGER=========CP' had
     to be terminated.
We are on SAP BW 7.40 patch level 5. Could you please advice the reason for this?

Hello,
so after implementing note 2050531 you should add the following entry in table UJPS_RESOURCE (caution I misspelled it earlier, it is not ups_resource).
You can do this through transaction SE16 -> enter UJPS_RESOURCE and hit Create Entries.
Fields MANDT and APPSET_ID should be filled with your BW System Client ID (i.e. 100) and your BPC Environment ID (i.e. ENVIRONMENTSHELL). The entries that appear to be empty should be left empty.
MANDT
APPSET_ID
RESOURCE_ID
TSTPNM
TIMESTMP
OBJSTAT
CONTREL
CONTTIMESTMP
OWNER
BWAPPL
ACTIVFL
PARENT_RES_ID
UPDATE_COUNTER
RESOURCE_TYPE
CREATE_USER
CREATE_TIME
ORIG_LANGU
OWNER_ID
OWNER_TYPE
Client ID
Your Environment ID
005056B236881ED38AE1D894578A8F97
0
ACT
0
3
0
FOLDER
0
E
005056B236881ED38AE1D894578A8F97
TEAM
After this you should be able to release your request.
Hope this is helpful.

Export Release Build error - Exception in thread "main" java.lang.Error: Unable to find named traits

I've been developing an AIR application for Android and iOS. During development, I've run the application (in debug mode) in the desktop simulator as well as on an iPhone 4 and a Nook Tablet.
However, I recently tried to "Export Release Build" for iOS and hit the following error: (I've stripped out the package and class information in the error message below)
!ENTRY com.adobe.flexbuilder.project 4 43 2012-04-06 13:09:15.516
!MESSAGE Error occurred while packaging the application:
Exception in thread "main" java.lang.Error: Unable to find named traits: valid.package.path.here::ValidClassName
          at adobe.abc.Domain.resolveTypeName(Domain.java:231)
          at adobe.abc.Domain.resolveTypeName(Domain.java:148)
          at adobe.abc.GlobalOptimizer.sccp_eval(GlobalOptimizer.java:6665)
          at adobe.abc.GlobalOptimizer.sccp_analyze(GlobalOptimizer.java:5909)
          at adobe.abc.GlobalOptimizer.sccp(GlobalOptimizer.java:4628)
          at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:3514)
          at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:2215)
          at adobe.abc.LLVMEmitter.optimizeABCs(LLVMEmitter.java:526)
          at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:336)
          at com.adobe.air.ipa.AOTCompiler.convertAbcToLlvmBitcodeImpl(AOTCompiler.java:472)
          at com.adobe.air.ipa.BitcodeGenerator.main(BitcodeGenerator.java:82)
Compilation failed while executing : ADT
!STACK 0
java.lang.Exception
          at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1019)
          at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
          at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
          at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.doPackage (ExportReleaseVersionWizard.java:283)
          at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.performFi nish(ExportReleaseVersionWizard.java:152)
          at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:827)
          at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:432)
          at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
          at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:240)
          at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
          at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
          at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
          at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
          at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
          at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
          at org.eclipse.jface.window.Window.open(Window.java:801)
          at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction$1.run(Export ReleaseVersionAction.java:97)
          at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction.run(ExportRe leaseVersionAction.java:103)
          at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
          at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229)
          at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:584)
          at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
          at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :411)
          at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
          at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
          at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
          at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
          at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
          at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)
          at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)
          at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2494)
          at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:674)
          at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
          at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)
          at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
          at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
          at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
          at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
          at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
          at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
          at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:597)
          at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
          at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
          at org.eclipse.equinox.launcher.Main.run(Main.java:1410)
The class the error message is referring to is defined with a SWC that my project links to. However, I've even tried to define a class with that same name (and location) within my project and it still fails to find it.
Why am I able to Project->Clean and run this project within the desktop AIR player (or on the device in debug mode) but unable to export it as a release build?
I have found a couple of threads mentioning a similar error but none of them have been marked as resolved.

At this point I feel I am talking to myself, but I will share my work-around in case it helps another who may stumble across this post.
In my particular case, both my main AIR application and my ANE wrapper library were referencing the same external Flex library (same revision). Both projects had the library linkage set to merge. Changing the linkage to "External" on one of the 2 libraries (it doesn't seem to matter which) and leaving the other as "Merged into code" enabled the export to complete without the bizarre "Unable to find named traits" error.

Mm pr-po release strategy : error

Dear MM experts,
We already having MM-rel strategy for PR & PO with classification procedure and working fine,
Now business requirement is to change the MM-Rel PR& PO strategy,
New mm-rel strategy for PR customised in class 032 (not to use existing release groups & release strategies)
After doing config settings in customising client, the request moved to another client for testing.
Testing client, request moved successful, and while checking the settings in testing client,
in Release Strategies - details mode
Informatination is available at Release pre-requisites, Release Statuses without any error,
but when we try for Classification, we are getting the following error
"Error in classification (class PRREL class type 032)"
Can u please suggest what needs to be done so that we can go ahead further.
Kindly note while doing config setting client, we did not encounter the above error, it has accepted all the settings (copy existing rel group & having differnt rel strategies, etc)
pl help
Thanks in advance
Srihari

Hi Friends,
My requirement is to add new release strategy for pr & po.
Characteristics & Class are remain unchanged.
Pl advise to how to proceed, i mean
i have to set/create new release procedure, ie.,
New release groups
New release codes (bcos new codes are added & release levels remained same)
New release strategies
How i can retain the Old PRs & POs released with earlier release strategy/release codes?
PRs & POs not released can be with new release strategy, but i have to ensure the old prs & pos (released) were with earlier release strategy & release code.
Also, I need ur advise, how the new release strategy works for workflow
pl help
thanks & regards
Srihari

No Authorization for release process error for Purchase requisition App.

We have configured a custom workflow for the purchase requisition and we are getting following error while:
You have no authorization for a release process
You have no authorization for a release process [GBAPP_APV_MSG/017] (error)
No exception text available [/IWBEP/CX_MGW_BUSI_EXCEPTION] (error)

Hi Masa,
I have the same problem, I did the test to run a workitem from SAPGUI inbox and works well.
The strategy is defined correctly, but continue with the error.
2015-03-27 17:36:21 The following problem occurred: HTTP request failed400,Bad Request,{"error":{"code":"GBAPP_APV_MSG/017","message":{"lang":"es","value":"Not authorized for release process"},"innererror":{"transactionid":"551461B844396C12E1000000B52A6013","timestamp":"20150327201237.8762600","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"GBAPP_APV_MSG/017","message":"Not authorized for release process","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"","propertyref":"","severity":"error"}]}}} -
Please your Help.
Regards,
Francisco.

Service entry sheet Release strategy Error

Hi Guys
I have one scenario where Iam not able to post Service enrty sheet
We have release strategies A1,A2,A3,A4,A5
Some service entry sheets are there in the system with each release strategy
We have deleted A2,A3,A4,A5 and A1 remains there
While release the service entry sheets which are having Release strategies A2,A3,A4,A5
We are facing problems not able to release
please provide any solution to this error ,
It is not possible to restore previous release strategies A2,A3,A4,A5
We need to change release strtegy A2,A3,A4,A5 to A1 for existing service entry sheets
Please suggest solution.
Thanks in Advance
SAP MM

Hi,
You are created release strategies A1, A2, A3, A4 & A5 and now deleted A2, A3, A4, A5 but A1 remains there in the system.
You could have take precaution ieu2026u2026all SES should be released 1st and then deleted youu2019re release strategies A2, A3, A4 and A5.
For quick solution------ >As now deleted A2, A3, A4, A5 and you want to triggers A1 only for all already created service entry sheet(SES) , then just go to all created SES, do some changes( like change quantity and then retrieve the original quantity in SES) by editing SES and see how re- triggers release strategy A1.{ 1st do it for one SES(as SES number created, you will have same SES number after changes in SES) and try for all SES}
Regards,
Biju K

Crystal Reports XI Release 2: Error message when trying to install

I am unable to install Crystal Reports XI Release 2 onto my computer. After putting CD1 into my computer and clicking install, I get the following error message:
"Error applying transforms. Verify that the specified transform paths are valid."
A couple members of my companies' I.T. department tried to help, but the error message was foreign to them. Tthey even built me a new hard drive, but unfortunately it gave me the same error message.
I am able to install Crystal Reports XI without a problem, but for some reason, Crystal Reports Release 2 will not install.
Any help you can provide in this matter would be greatly appreciated.

1.Are you able to neglect the installation window completely.
Like,can you just open your drive which accepts the cd and copy all the files from the win32 folder to another folder say "test".
2. If not on this machine, could you please try this on some other machine.
3.Otherwise you can download it from the following URL:
http://resources.businessobjects.com/support/additional_downloads/servic
e_packs/crystal_reports_en.asp#CRXIR2
Please select the "Service Pack 2 - Full build - ZIP - 1.03 GB -released April 2007" hyperlink.
Let me know if this helps
Thanks

PR release strategy-ERROR

Gurus,
I am trying to assign for PR rel strategy,i am getting this error.
Error in classification (class RP_XX class type 032)
Message no. ME179
Procedure
Please check the specified class or class type in Customizing for the release procedure.
What should be done

Seems like you are applying classification view to a system which is not customizable.
You need to use tcode: CL20n/Cl24n to populate the classification view in case of system uncustomizable.
PR Release : Error in Classification
Classification error
Error in classification (class CLASS-PLANT class type 032)
Edited by: Afshad Irani on Jul 6, 2010 1:07 PM

Release Management error "The system cannot find the file specified"

We are getting the above error when deploying to a set of 4 servers (all belong to a tag). The deployment succeeds for 3/4 servers. For the server that fails, there is no tool or command output log to look at. We are able to log on to the
server in question and run the command manually (i.e. .\msiexec <filename.msi>) and that succeeds.
What can we do to troubleshoot this further?

Thanks, John. We are using Update 4. I enabled the details logging on the deployment agent and saw the following. The POSValidationSvc_Installer.msi file is available in the 201501200901505104929-7 folder:
Deployment: **********Installation will be done from this folder: "C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM\POS_HQ_MSI_INSTALLER\201501200901505104929-7"
1/20/2015 9:01:51 AM - Information - (12004, 11168) - Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.ComponentProcessor.InstallComponentForDeployerImplementation:
Deployment: **********Installing component using command "powershell -File ./msiexec.ps1 -MsiFileName "POSValidationSvc_Installer.msi" -MsiCustomArgs "" /i /qn /l*v"
1/20/2015 9:01:53 AM - Information - (12004, 11168) - Deployment: Invoke Get-ExecutionPolicy
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: FilteredReleaseComponentName C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM POS_HQ_MSI_INSTALLER
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: FileExists C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM\POS_HQ_MSI_INSTALLER\201501200901505104929-7\powershell
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: FilteredReleaseComponentName C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM POS_HQ_MSI_INSTALLER
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: FilteredReleaseComponentName C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM POS_HQ_MSI_INSTALLER
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: Starting process -File ./msiexec.ps1 -MsiFileName "POSValidationSvc_Installer.msi" -MsiCustomArgs "" /i /qn /l*v, powershell, C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM\POS_HQ_MSI_INSTALLER\201501200901505104929-7
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: Detaching process event handlers
1/20/2015 9:01:54 AM - Error - (12004, 11168) - The system cannot find the file specified: \r\n\r\n   at System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo startInfo)
   at Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.ComponentProcessor.ExecuteProcess(ProcessStartInfo startInfo, String argumentsWithStarsForPassword, Int32 timeoutInMilliseconds)
   at Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.ComponentProcessor.InstallComponentForDeployerImplementation(String application, String arguments, String argumentsWithStarsForPassword, Func`3 accountForPowerShellBug, Func`2
verifySecurityRestriction, Func`2 fileExists, Func`4 executeProcess, Action writeProcessOutputLog, Action readCustomLog, Action readAutoLog)
   at Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.ComponentProcessor.InstallComponentForDeployer(String application, String arguments, String argumentsWithStarsForPassword)
   at Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.ComponentProcessor.DeployComponent()

Oracle 11g Release 2 "error in moving file"

Hi there, right now I'm trying to install Oracle 11g release 2 64-bit on Windows 7 64 bit. about half-way through the installation i get an error message:
"error in moving file C:\app\dlee14\product\11.2.0\dbhome_1\bin\oralbac11.dll to C:\app\dlee14\product\11.2.0\dbhome_1\bin\oralbac11.dll.dbl"
what's going on and how do i fix it?

1010200 wrote:
Dear Team,
we are getting error while installing RAT( workload features)
Neither D:\oracle\app\product\11gRel2/bin/orarat11.dll.dbl nor D:\oracle\app\product\11gRel2/bin/orarat11.dll exist.
Therefore, the ORACLE_HOME is in an invalid state with respect to the option '
Please suggest :I suggest that instead of hijacking a two year old thread that is only tangentially related to your problem, that you start your own thread with as many of your specific details as you can muster.

Export Release Build errors

This just started happening to me in the last day or two. Every time I try to use Export Release Build, I get an error:
A folder named bin-release already exists with different case.
I checked my entire workspace folder and removed every bin-release folder, but the error persists. Is there any way I can get more info on what is annoying it? (Or better yet, a cure...)

I've been getting the same error. Here's my log:
!ENTRY com.adobe.flexbuilder.project 4 43 2010-09-07 15:03:56.806
!MESSAGE Uncaught exception in compiler
!STACK 0
java.lang.ArrayIndexOutOfBoundsException: 1129796362
        at flex2.compiler.PersistenceStore.readCompilationUnit(PersistenceStore.java:1568)
        at flex2.compiler.PersistenceStore.readCompilationUnits(PersistenceStore.java:1541)
        at flex2.compiler.PersistenceStore.read(PersistenceStore.java:958)
        at flex2.compiler.CompilerAPI.loadCompilationUnits(CompilerAPI.java:4856)
        at flex2.compiler.CompilerAPI.loadCompilationUnits(CompilerAPI.java:4835)
        at flex2.tools.oem.Application.loadCompilationUnits(Application.java:706)
        at flex2.tools.oem.Application.recompile(Application.java:1071)
        at flex2.tools.oem.Application.compile(Application.java:819)
        at flex2.tools.flexbuilder.BuilderApplication.compile(BuilderApplication.java:344)
        at com.adobe.flexbuilder.multisdk.compiler.internal.ASApplicationBuilder$MyBuilder.mybuild(A SApplicationBuilder.java:276)
        at com.adobe.flexbuilder.multisdk.compiler.internal.ASApplicationBuilder.build(ASApplication Builder.java:127)
        at com.adobe.flexbuilder.multisdk.compiler.internal.ASBuilder.build(ASBuilder.java:190)
        at com.adobe.flexbuilder.multisdk.compiler.internal.ASItemBuilder.build(ASItemBuilder.java:7 4)
        at com.adobe.flexbuilder.project.compiler.internal.FlexProjectBuilder.buildItem(FlexProjectB uilder.java:480)
        at com.adobe.flexbuilder.project.compiler.internal.FlexProjectBuilder.build(FlexProjectBuild er.java:306)
        at com.adobe.flexbuilder.project.compiler.internal.FlexIncrementalBuilder.build(FlexIncremen talBuilder.java:157)
        at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:627)
        at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
        at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:170)
        at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:201)
        at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:253)
        at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
        at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:256)
        at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:309)
        at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:341)
        at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:140)
        at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:238)
        at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)

Release Strategy ERROR in SAP-MM

Dear gurus,
I got a error while doing release strategy in SPRO. When click the Classifiaction button this error shows below:
ERROR: Error in classification(class TITAN CLASS RP class type 032)
Kindly give me brief solution for this error.
Regards,
Raju

Dear Raju,
The problem is that class and characteristics are available on system but the classification is missing. It arises among other reasons, if the release strategy has No classification.
You may need to transport again the classification data.
Regards,
ian, Wong Loke Foong

Release PO Error

Similar Messages

Maybe you are looking for