Release procedure for condition record

Hello Gurus,
please tell me how to run release procedure for condition record. especially the function of the release status and process status.
thanks very much!

Hi,
Please go through the following information.
[Relase Procedure for Condition Record|http://help.sap.com/saphelp_47x200/helpdata/en/a4/af9e78e69611d2ace10000e8a5bd28/frameset.htm]
[Release Procedure for PR|http://www.sap123.com/showthread.php?t=59]
Reward if helpful.
Thanks and Regards,
Naveen Dasari

Similar Messages

Process Status & Release Status for Condition Record

Hi Gurus,
Pls help me out in the the following scenario.
I want to activate Authorization level check for Condition records.
For example, Product price PR00 is being entered by first level.
After verification done by second level only, that condition record to be used for sales order processing.
I have gone through Process status & Release Status. But not getting full clarity on this.
Rgds,
Senni.B

Hi,
Please go through the following information.
[Relase Procedure for Condition Record|http://help.sap.com/saphelp_47x200/helpdata/en/a4/af9e78e69611d2ace10000e8a5bd28/frameset.htm]
[Release Procedure for PR|http://www.sap123.com/showthread.php?t=59]
Reward if helpful.
Thanks and Regards,
Naveen Dasari

Release Strategy for Condition Records

Hi,
This is a requirement from my client. The client needs to give 4 levels of release strategy for the condition records created. The selling price for the products will be entered by person 1. This has to be approved by the sales execute (person 2); then by the sales manager (person 3); finally by the General Manager (Person 4). The selling price of the products ranges from 10 lakhs to 40 lakhs. so, the release strategy is needed. This type of release strategy is available in MM for PR and PO. Please let me know whether similar facility is available in SD. Any alternative is also solicited.
Regards,
K Bharathi

Hi,
Thanks for your valuable reply.
I defined 3 Processing status (Menu path: SPRO >> SD >> Basic Fn >> Pricing >> Define Processing status). They are EU-End user, KU-Key user, MD-Final authority. These processing statuses are assigned to Release status. First two processing status EU, KU were assigned to A (Blocked). The third processing status MD was assigned to Blank (Released). The purpose is: at processing status EU one person will upload the price master. Second person will check the price and will change the processing status to KU if he satisfies with the accuracy of the price master. The third person (final authority) will check the price and set the Processing status MD. Once the condition record gets the status MD, the prices can be used for creating sales order because it is released.
In the condition record for PR00, when I enterthe processing status EU or KU the release status shows 'Blocked' release statuses. When I enter MD in the processing status, the release status show 'released'.
My question is how can assign the responsibilities of changing the processing statuses EU to KU, KU to MD to two different persons.
Regards,
K Bharathi

Release status for condition records

Hello,
When ever a user changes the price in the condition record, I want the price to be in blocked status initially. Sales document should only pick tht price when it is release by the concerned person.
Could you tell me how is the authorization given to some users based on the processing status.
Thanks and Regards,
Pavan P.

I tried to make the Processing status as blank and tried to save it and assigned the release status "Blocked". This doesn't seem to work. Any other ideas?

How to configure release procedure for rate contracts release

Dear all,
How to configure release procedure for rate contract following are the requirements
they are two release codes c1 & c2 <=100000,>=100000
                if c1 is not there c2 has to be approved
     Change in the value of the rate contract contract
     Change in the validity of the rate contract
     Addition of deletion of line items
While using a non u2013 released rate contract in the PO an error message should shoot out.
Also the logic should be changed while using the rate contract in the PO.
The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
It should be possible to refer existing valid rate contracts in purchase orders.
Regards,
bhaskar

Hi,
In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
class in standard is the same FRG_EKKO, you can use the same for contract.
To distinguish if it's a contract or PO, EKKO-BSART can be used.
For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
You can restrict the document type to set up the release strategy for only contract.
Of cause, you can also create your own release class Z* for contract copying standard
one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
OLME:
-> contract
->Release Procedure for Contracts
->Define Release Procedure for Contracts
->Release Groups
If you have already created the PO release class.
Assign a new chracteristic of Document Category -BSTYP
Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES

Authorization level check for Condition records.

Hi,
Hi Gurus,
Pls help me out in the the following scenario.
I want to activate Authorization level check for Condition records.
For example, Product price PR00 is being entered by first level.
After verification done by second level only, that condition record to be used for sales order processing.
I have gone through Process status & Release Status. But once it is Blocked i am not able to release it...
Rgds,
Amol

Amol,
Please confirm transaction code you are using in this scenario to release. I can help with this, just a little more detail.
Thanks,
Jay

Error in Release procedure for PO

Hi
I have created a release procedure for Purchase groups and plants. But now I want to add a new Purchasing group to the same strategy. How to do this.

Hi Garapati,
Release strategy is configuration in customisation screen. Do not merely do assignment of object via CL20N or CL24N. Though assigning the object would work, but is better to do it in customisation.
Go to this path: -
SPRO>IMG>Materials Management>Purchasing>Purchase Order>Release Procedure for Purchase Orders>Define Release Procedure for Purchase Order (Execute)-->Release Strategies
Go to: Position>Identify the Group> Identify the Release Strategy code
(How to know what is the release strategy code? In the PO where a release strategy for this value and characteristic is triggered, you can go to the Header-->Release Strategy tab, you would be able to see that the release strategy is triggered. Simply remember the release strategy code. If you already know the code, ignore this step)
When the search is complete and located the right release strategy that you want to amend, select it and click on Details.
Inside, go to Classification. Check that this release strategy contain the characteristic that you want to amend. You would be able to see the Characteristic "Purchasing Group" already maintained. Click on Purchasing Group line and click on "Add rows" icon below, then key in the the Purchasing Group value that you want to add.
Hit Back, and then Save this customisation.
Now, the PO release strategy will trigger the Purchasing Group you just added if the PO details entered matched the Purchasing Group, Plant and Document Type value that you maintained for this release strategy.
Hope this helps.
Rgds.

With classification release procedure for PO

Dear Experts ,
here one issue is with classification release procedure for PO
when I create characteristics
in Additional data
table name :-- Cekko field name :-- match code
enter
click all sec charars then which block I select to go next screen
and fill name is right or ?
please help me

hi,
in additional data field you have to give the field name of characteristic you are maintaining. like if you want to maintain characteristic as document type of the PO then we have to give the field name for document type mentioned in table CEKKO i.e. BSART.
then you have to do the value assignment. here you have to tick the check box for "NOT READY FOR INPUT".
JASH

How to extract values from pricing procedure for conditions in CRM Billing?

I have a number of conditions in the pricing procedure in CRM Billing that I would like to extract to SAP BW. How can this be done?
Is there a standard extractor for CRM Billing similar to the SD Billing extractor "Extraction of SD Billing Conditions" (2LIS_13_VDKON)?
If there is no standard extractor, is there another way to extract the conditions and the related values?
I am using the standard CRM Billing Extractor 0BEA_CRMB already, so maybe an append could solve my problem. How can this be done? In what CRM-tables can I find the values from pricing procedure for conditions in CRM Billing?

you may want to post that last question in a CRM forum... in ECC it would be table KONV

Release Procedure For Contract

Dear Gurus,
I have created a release procedure for Purchase Order.Now i created a Contract , it also asking for release.I dont know y its happening??
Is ter any link between Po release and Contract Release??
Plz Explain ....
Thanks in advance...........

Hi,
Whatever document types you give in release procedure will undergo Approval process.
Since you have given MK & WK, your contract has been blocked for release. Unless it is released, it cannot be used for further transactions, say creation of PO.
Tcode to release contract is ME35K.
Release it using your release group & release codes, Afterwhich you will be able to create PO with contract reference.
If you donot want contract to undergo release procedure, please do not mention WK or MK in values for doc characteristics. Give the document type of PO alone. Say NB (standard PO)
Regards,
Divya

Regarding releasing procedure for p.o.

hi sapgurus,
the configuration for p.o. release procedure is working perfectly but whenever i go to me29n or me28 i am getting two step release procedure but in industry if the manager has given excess to me29n/me28 then himslef ca release the p.o by means of clicking both release steps, that means without general manager review the manager can release the p.o by means of clicking both. hence i am willing to restricate each user's acess to other stepd release procedure.
examaple
in me29n/me28 :-
1) manager.
2) general manager.
in this case i want the manager to click on his resepctive release step and should not allow to acess the general manager's relase step's.
thanking you
praveer

hi,
please visit
www.sap123.com
there is a thread which explain very clearly for the release procedure for PO.
In PR (With classification0 there is only difference , you use CEBAN communication structure instead of CEKKO for PO)
Regards,
vijay

Release procedure for p.o.

hi sapgurus,
here is the scenario,
i have as issue ( for P.O value only)
1) if the value is < 2 lacks then one person will release.
2) if the value is > 2 lacks then 2 persons will release

hi,
3.4.24 Releasing Procedure for Purchase Documents
Use
This setting is incorporated to just give demonstration of how SAP Release procedure works. The aim of this procedure is to replace manual written authorization procedures using signatures by an electronic one, while maintaining the dual Ctrl principle. The person responsible processes the purchasing document in the system, thereby marking it with an "electronic signature" which can give the document legal force.
3.4.24.1 Creation of Characteristics
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu Materials Management  Purchasing  Purchase Order  Release Procedure for Purchase Orders  Edit Characteristic
Transaction Code CT04
2. On the Characteristic screen, make the following entries.
3. In put POVAL in filed Characteristic and choose Create (White paper) icon or Ctrl + F3 to begin creation of characteristic.
Field name Description User action and values Note
Select Addnl Data tab
Table Name Table Name CEKKO
Field Name Field Name GNETW
Choose Enter to continue, system will give an information message saying Format Data taken from ABAP dictionary, Choose Enter again to continue.
Select Basic Data tab
Description Description Total net order value
Status Status Released
Data Type Data type Currency format Selected by system
Number of characters Number of characters 15
Decimal places Decimal places 2
Currency Currency INR
Interval vals allowed Interval values allowed Check this tick box
Multiple Values Multiple values allowed Select this radio button
4. Choose Enter to complete the entries
5. Choose Save icon or Ctrl + S to save the characteristic.
3.4.24.2 Creation of Class
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu Materials Management  Purchasing  Purchase Order  Release Procedure for Purchase Orders  Edit Class
Transaction Code CL02
2. On the Class screen, make the following entries:
Field name Description User action and values Note
Class Class PORELPROC
Class Type Class Type 032
Choose Create icon or white paper icon to create new class.
Description Description Purchase Order Release Procedure
Status Status Released
Choose Char. Tab to input characteristic name.
Characteristic Characteristic POVAL Created in above step
3. Choose Enter to complete the entries
4. Choose Save icon or Ctrl + S to save the characteristic.
Result
Class type 032: Class PORELPROC created.
3.4.24.3 Configuration of Release Procedure
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu Materials Management  Purchasing  Purchase Order  Release Procedure for Purchase Orders  Define Release Procedure for Purchase Orders
Transaction Code SPRO
2. On executing the transaction system will give a popup screen choose Release Groups, system will display Change View u201CRelease Groups: External Purchasing Documentu201D: Overview.
3. Choose New Entries icon and make the following entries:
Field name Description User action and values Note
Rel. Group Release Group 02
Class Class Name PORELPROC Created in above step
Description Description PO Release Procedure
4. Choose Enter to complete the entries
5. Choose Save icon or Ctrl + S to save the entries.
6. Choose yellow arrow to go back to popup screen.
7. Choose Release Codes to select.
8. Choose New Entries icon and make the following entries:
Field name Description User action and values Note
Grp Release group 02 Created in above step
Code Release Code 01
Workflow Workflow Leave it blank
Description Description Purchase Officer
Grp Release group 02 Created in above step
Code Release Code 02
Workflow Workflow Leave it blank
Description Description Materials Manager
9. Choose Enter to complete the entries
10. Choose Save icon or Ctrl + S to save the entries.
11. Choose yellow arrow to go back to popup screen.
12. Choose Release indicator to select.
13. Choose New Entries icon and make the following entries:
Field name Description User action and values Note
Release ind. Release Indicator 1
Released Released Leave it blank
Chgable Changeability 4
Value change % Change of value 10%
Description Description Purchase Order Blocked
Go to 2nd line and input the following values:
Release ind. Release Indicator 2
Released Released Select Check box
Changeable Changeability 6
Description Description Purchase Order Released
14. Choose Enter to complete the entries
15. Choose Save icon or Ctrl + S to save the entries.
16. Choose yellow arrow to go back to popup screen.
17. Choose Release Strategies to select.
18. Choose New Entries icon and make the following entries:
19. System will give new screen New Entries: Details of Added Entries
Field name Description User action and values Note
Release Group Release group 02
Rel. Stategy Release Strategy S1
Capital Items Release
Release Code Release Code 1 01
Release Code Release Code 2 02
20. Choose Enter to complete the entries.
21. Choose Release prerequisites icon and select check box 02 at the bottom and choose Enter.
22. Choose Release statuses icon, system will give a popup screen system will default 1, 1 and 2 entries one by one as a default. Choose Continue.
23. Choose Classification icon, here you can see Total net order value is displayed, please input >= 1.00 INR value in the white placed and choose Enter.
24. Choose Next Screen icon or choose F8 to continue.
25. If you want to simulate the release procedure you can choose Release Simulation icon.
26. Choose Enter to complete the entries.
27. To save the settings choose Save icon or Ctrl + S.
Result
Release procedure is saved.
3.4.24.4 Assignment of Values to Release Procedure
As a default all the purchase documents >= Rs. 1000000.00 is suggested in the following step of release procedure, if you want to have different one you need to change the value in the following step. If you do not want release procedure you may change the value to Zero.
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu Cross-Application Components  Classification System  Assignments  Assign Object to Classes
Transaction Code CL20N
2. On the Class screen, make the following entries:
Field name Description User action and values Note
Class Type Class Type 032
Choose Enter to Assign values.
Release group Release Group 02
Rel. Strategy Release strategy S1
Choose Enter.
System will give Class name in Assignments, Double choose Class Name.
System will display Characteristic name Total net order value. Assign the value >= 1000000.00 INR against filed Value.
3. Choose Enter to complete the entries
4. Choose Save icon or Ctrl + S to save the characteristic.
Follow these steps
G.Ganesh Kumar

Additional Field for Condition Record ..............

Hi Gurus
Plz read the Question Properly
I know that for adding a new field as key field for condition record , one needs to append the structure( main ) KOMPAZ so that the field appears in KOMP structure .
Say want Shiiping Point as one of fields in Condition Records. ....VSTEL field
Now when the field appears in KOMP , then we can CREATE CONDITION RECORD FOR THE SAME
FOR EG: *SALES ORG - DISTRIBUTION CHANNEL-CUSTOMER-SHIPPING POINT-MATERIAL..... BASED MATERIAL PRICING
WHAT I FAIL TO UNDERSTAND
1.WHY WE PASS SHIPPING POINT ( VSTEL) FIELD FROM LIKP -VSTEL TABLE TO NEW FIELD DEFINED.
2.LIKE SALES ORG/ DISTRIBUTION CHANNEL ALSO ARE DEFINED IN ENTERPRISE STRUCTURE AND VALUE IN CONDITION RECORD IS PICKED FROM THERE ONLY, WHY NOT SHIPPING POINT.
WHY THIS ??????....
Supply the new field you defined by including the following source code line in
USEREXIT_PRICING_PREPARE_TKOMP:
MOVE xxxx-VSTEL TO TKOMP-ZZVSTEL.
In order processing you find the user exit in Include MV45AFZZ, and in billing document processing you find it in Include RV60AFZZ.
Regards
Rohit

> Plz read the Question Properly
I read the question properly ;-).
> WHAT I FAIL TO UNDERSTAND
>
> 1.WHY WE PASS SHIPPING POINT ( VSTEL) FIELD FROM LIKP -VSTEL TABLE TO NEW FIELD DEFINED.
The first thing you need to understand is that the condition records value is not based upon the the enterprise structure which you have defined. Rather it will pick value from the sales documents which we have created. The reason behind including this LIKP-VSTEL is that only, Just imagine, where you are using condition records??? in Sales order, in delivery, in billing..... and based on the data passed in these documents your condition records will be populated.
Again for example : you have maintained record for Sales org 1000, DC 10, division 00 shipping point 1000 then the record will come into the document provided the document should fulfill these all.
I hope this will make you understand this.
> 2.LIKE SALES ORG/ DISTRIBUTION CHANNEL ALSO ARE DEFINED IN ENTERPRISE STRUCTURE AND VALUE IN CONDITION RECORD IS PICKED FROM THERE ONLY, WHY NOT SHIPPING POINT.
No the records are only coming from the Sales documents. only.
Thanks,
Raja

Writing a store procedure for deleting records

how can i write a store procedure for deleting records from a table.
i have a table called employees
empid
empname
deptid
and table department
deptid
dept
floor
how can i write a store procedure which would delete records of employees from employees table for particular department when i delete that department from department table.
thanks

872959 wrote:
how can i write a store procedure for deleting records from a table.
i have a table called employees
empid
empname
deptid
and table department
deptid
dept
floor
how can i write a store procedure which would delete records of employees from employees table for particular department when i delete that department from department table.
thanksDoes not seem to be a sound design, to me.
Employees do not go missing when organization change is made & department is eliminated.
If you insist such nonsense, write TRIGGER to issue desired DML

Cancellation of Release Procedure for PO

Hi All,
We have configured 4 step realesed stretegy for PO. Releasing is working fine but we are facing probelm in cancellation.
In cancellation any step you can cancle at any step . But What we want if approval is done R1 >R2> R3> R4 same way cancellation would also follow R4>R3>R2>R1.
However currently system allows even R1 to allow cancel a fully released PO . When R1 cancle than all realease status R2>R3>R4 is also set to unreleased.
How to stop this and allow system to follow same hirarchy in cancellation also.
Thanks
Sanjay

Hi,
Once you create the characteristic and class.
You click on release procedure for Purchase orders.
Click on Release Groups.
enter your release group and release class.( If there is release group already add your release class to it).
Come out and click on Release Codes.
Enter your release codes for your release group. save
Come out and click on release Indicators. Enter release indicators and save.
Click on Release Strategies and Enter your release strategies and click on
There will be step by step procedure to give your amount for charectristics that u maintained.
pls follow that.
Thanks
Asini

Release procedure for condition record

Similar Messages

Maybe you are looking for