Release procedure with classification not getting triggered

Hi,
I have configured the new release procedure for the PR release of type with classification, but its not getting triggered. Earlier my SAP system had without classification in place, but I wanted to have with classification. Can any one suggest how do I switch between two.
Ideally once I create the release group in with classification procedure that procedure gets activated and gets triggered. Unfortunately its not happening in my case. I tried deleting the entries from the without classification side too, but still it doesnt respond. Is there in patch or note missing.
Your suggestion would be highly appreciated.
sachin

Hi Jurgen,
I am configuring it for PR and with classification method. Well for simplification I am using just purchase group as characteristics, but still its not working. Earlier system had without classification in place, as its there in a default system and used to get triggered. When I created new procedure its not getting triggered. To be assured I deleted the data from witout classification, but still its not working.
Where as I did the same setting for PO, its working and giving me correct releaes strategy.
My characteristic is PRGRP using the communication structure CEBAN and field as EKGRP
Please suggest me on this.
sahcin
Edited by: sachin sagane on May 18, 2010 6:32 PM

Similar Messages

Release Procedure with classification

hai all,
I read a statement which say "Realese procedure with calssification PR can be relesed at header level"
I want to know what does this sentence mean actually. if possible please expalin me with a practical example
thanks in advance
with regards
Sreenivasa Chary
9848993644

Release procedure defined at the client level and it use only one class
now suppose you have assigned the 6 char to the class then your release strategy should contain the value in each characteristcs other wise your release will not work.
the bottom line is you have to define the value for each char.

Release Procedure for PO not getting applied

Dear All,
I have created a Release procedure for PO, for the field - Order Type. I have defined & followed all the steps i.e., Characteristic, Class, Rel. Groups, Rel. Codes, Rel. indicator & Rel. strategy.
Then i go to CL20N and assign object to class.
But when i create a PO & try to release it in ME29N it says 'Purchasing Doc. cannot be released"
The same release procedure was working fine few days back.
Kindly let me know if i have missed out some steps or someother settings need to be made.
Regards,

hi kedar
I tried that, still I get the message "No suitable Purchasing Documents found"
any settings to be checked in characteristics ?
Hey, and one more thing... everytime I exceute ME28 or ME29n, and later when i try to open Class...... i get an error message "Class type 032: Class <class name> being processed by <username>"
Then i have to go and delete in the locked entries, only then I can see the Class.
Rgds,

Regarding Release Procedure with classification

Hi All,
Please anybody tell me,is't possible to release at item level in external document like PO,RFQ.
Thanks & Regards
Suresh.

In principle you wouldn't send (/release) part of an external document.
The information at Header level applies to the whole of the document, in other words it can also be considered as applying to each item. For example the payment terms apply to the whole of a PO, not the individual items. The individual items can not be considered complete without the Header information. Consequently the release strategy is set at Header level.
In theory all POs may be created with reference to preceding documents and these may be released at item level e.g. Purchase Reqs. Therefore at the time of creating the PO the individual PR items have been approved from a business point of view, the PO typically represents the overall commercial approval for the items.

Release procedure with out classification

HI, AJIT SINGH HERE,
after making proper settings in the 'release procedure with out classification', when i try to create a puchase requisation by ME51N to test the working of release procedure ,i'm not getting check boxes of approval levels.
please guide

hi
did u took the pur grp as the chrecteristic for release
if yes then put the value of pur grp in release strategy
plz check ur release strategy as per follows
http://www.sap123.com/showthread.php?t=59
http://www.sapstudymaterials.com/search/label/0270-MM%20Configuration%3A%20PR%20Release%20Strategy%E2%80%93Basic%20Concept
regards
kunal

Job are not getting Triggered

Hi All,
I Have encountered an Issue with JOB not getting Triggered in BI system .
For Datasource 2LIS_04_P_ARBPL , I have created Infopackage , when I am going to schedule tab and running an Infopackage. Job is not getting trigger . And it is going on Hold for a longer period.
Data is in the source system and I am unable to fetch data from source system .
One more thing there was some upgration activity happened in the source system one day before.
Could u please let us know , Is the reason behind could be upgration in source system ?
Please let me know what needs to be crosschecked and what could be the solution for this Issue.
Looking for response .....
Regards,
Mahesh

Hi ,
In the Source system Data is fetching I mean through RSA3.
Even I able to replicate the Datasource as well.
Also in T-code : SM59 , when I am checking Source system Connection check , it is not poping any error.
But When I am Checking through RSA1 - > Source System
Source system connection by clicking CHECK Option then it is poping an error "Check Failed for RFC Connection ; Check Destination ".
Also In Source system T-code :SM50 I can see three BGD WP which are in waiting status.
In T-code : BD87 I have checked I didnt find any IDOC's in Yellow colour .
How do we need to check whether ALEREMOTE is active or not?
Actually my Issue is Jobs are not getting trigger in BI . So what all things needs to be taken care apart from this.
So Is there any thing to be taken care from Basis team for Restarting of BI Jobs after any kind of Upgration activity in general?
Regards,
Mahesh

Release strategy not getting triggered.

Hello,
As per the client request, new Purchase group had to be added to the existing release strategy.
I had added the purchase group in the edit characteristics and in the release strategies: classification.
But now the the release strategy is not getting triggerred.
In CL20n I see that the, status is marked 3 i.e incomplete. The reason to this is not known as customizing done is correct.
In OMGSCK i see that no errors are found with the release strategy.
Please suggest.
Regards,
Neetha

hi,
Sometimes the strategies are taken after restarting the sap system...there has been one same situation before also..at that time the same strategy started working after restarting the sap system...
pls check it may be the same issue with you also..
Regards
Priyanka.P

User command is not getting triggered in interactive ALV with LIST display

Hi experts,
I have developed an interactive ALV report with LIST display. Here, the issue is, when i double click a record in the primary ALV list, the control must go to the USER COMMAND event which i have written in my report. But the user command event is not getting triggered at all when i double click any record.
It gives the following information instead.
"Choose a valid function".
(My user command name and its respective form name are same.)
Here is my code..
START-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program       = sy-repid
      i_structure_name         = p_table
      i_callback_user_command = 'TST1'
      i_callback_pf_status_set = 'SET_PF_STATUS'
    TABLES
      t_outtab                 = <dyn_table>
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
ENDIF.
FORM tst1 USING r_ucomm LIKE sy-ucomm
                rs_selfield TYPE slis_selfield.
* Local data declaration
DATA: li_tab TYPE REF TO data,
        l_line TYPE REF TO data.
* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
                <l_wa> TYPE ANY.
* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>. CASE r_ucomm.
*   When a record is selected
    WHEN '&IC1'.
*     Read the selected record
      READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
      rs_selfield-tabindex.      IF sy-subrc = 0.
*       Store the record in an internal table
        APPEND <dyn_wa> TO <l_tab>.
*       Fetch the field catalog info
        CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
          EXPORTING
            i_program_name         = 'Z_DEMO_PDF_JG'
            i_structure_name       = p_table
          CHANGING
            ct_fieldcat            = i_fieldcat
          EXCEPTIONS
            inconsistent_interface = 1
            program_error          = 2
            OTHERS                 = 3.
Please advice what is the msitake i have done here..

Read the following code:
pass the i_callback_user_command = g_user_command to the ALV function module and write the FORM user_command USING ucomm    LIKE sy-ucomm
                        selfield TYPE slis_selfield.
as shown below.
thanx
Data for ALV display
DATA : gt_fieldcat TYPE slis_t_fieldcat_alv,
        gt_events           TYPE slis_t_event,
        g_variant LIKE disvariant,
        g_user_command      TYPE slis_formname VALUE 'USER_COMMAND',
        g_status            TYPE slis_formname VALUE 'SET_PF_STATUS',
        gt_list_top_of_page TYPE slis_t_listheader,
        g_repid LIKE sy-repid,
        gf_pos TYPE i
Data for ALV display
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
          i_callback_program      = g_repid
             i_callback_program      = sy-repid
             it_fieldcat             = gt_fieldcat[]
       it_events               = gt_events[]
          i_callback_user_command = g_user_command
             i_save                  = 'A'
             is_variant              = g_variant
           TABLES
             t_outtab                = it_print.
FORM user_command USING ucomm    LIKE sy-ucomm
                        selfield TYPE slis_selfield.
CASE ucomm.
    WHEN '&IC1'.
      CASE selfield-sel_tab_field.
        WHEN '1-KUNNR'.
          READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
          IF sy-subrc = 0.
            SET PARAMETER ID 'BPA' FIELD wa_print-kunnr.
            CALL TRANSACTION 'BP'.
          ENDIF.
        WHEN '1-MATNR'.
          READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
          IF sy-subrc = 0.
            SET PARAMETER ID 'JP_ISS' FIELD wa_print-matnr.
            CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN..
           GET PARAMETER ID 'WRK' FIELD wa_zprint-werks.
           SET PARAMETER ID 'VKO' FIELD wa_zprint-vkorg.
           SET PARAMETER ID 'VTW' FIELD wa_zprint-vtweg.
           CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN.
          ENDIF.
Endcase.
Endform.

Output fax not getting triggered when sales order credit block is released

Hi Experts,
I am working on an issue.
I have one sales Order which has credit block.
when we release the credit block via vkm3, then the output fax gets triggered.
I have another sales order which has credit block,
when we release the credit blcok via vkm3 , the output fax is NOT getting triggered.
If any of you has worked on this setting, request your input on where to find the settings/coding for the same.
Any advice on this please.
Regs,
SuryaD.
Edited by: SuryaD on Oct 21, 2010 9:34 PM

Hi Brad,
Thanks for your response.
Order 1: Issues output fax(ZFAX) correctly when block is released.(i see output zfax in te output screen)
Order 2: Fails to issue output fax(ZFAX) even when the block is released.( i dont see any output in the output screen)
I went to Go to -Determine analysis for both orders 1 and order 2.
in both the analysis i am able to see the output ZFAX.
*Analysis Output*
*Order 1                                                                    Order 2*
1. ZFAX                                                                   1.   ZFAX
    10(Z010)                                                                 10(Z010)
       0000122426                                                              0000122427
2. ZFAX                                                                   2.   ZFAX
When i click, D.Click on the output type ZFAX on both the order Analysis output screen, i see similarities.
There in just 2 differences as below.
In the above screen,
1.Order 1 ==> has some value 0000122426
2.For Order 1==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
Diagnosis
Output ZFAX has already been issued. Multiple issue for this output type is forbidden in Customizing.
In the above screen
1.Order 2 ==> has some value 0000122427
2.For Order 2==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
No more information is available.
Please guide as to how to initiate the debug for output processing ?
Which screen where to switch on debugger.
where to look further?
Regards,
SuryaD.
Edited by: SuryaD on Oct 22, 2010 11:41 AM

Treasury workflow not getting triggered .

I have done all as given in the SAP doc ...
The release procedure for the business partner has been set up using a Business Workflow, for
which SAP has defined the standard role 20000053 'TRLOAPPROVAL' and the Workflow
template WS20000263 'WSTRLOAPPROV'.
Procedure
In order to use the release workflow for the business partner, you are also required to make
settings in Customizing for the Basic Functions area in Treasury in the following IMG activities:
By choosing u2019Activate Releaseu2019, you can activate the release for the business partner.
By choosing u2018Maintain and Activate Release Parametersu2019, you can specify the number of
release steps you require for each role category.
By choosing 'Adjust/Copy Workflow Template', make the following settings:
By choosing 'Define Standard Roleu2019, you create the responsibilities for the standard roles
delivered with the system, to which you assign users, positions, organizational units,
work centers, jobs, or people. Using the settings you make here, the system determines
the Responsible Agent [Ext.] during the workflow run.
By choosing 'Adjust Workflow Template', you then have to activate the event linkage.
but its not getting triggered .. the event which is gettting triggered is not the one whcih is used in the workflow
Thanks for help .
Naval Bhatt

Naval,
Either you can check SAP notes for the same or you can customize the workflow. If the event being triggered is different then copy the workflow and change the workflow start condition.

Tranposrt - Purchase Requisition Release Strategy with Classification

Gurus!
Tell me if I want to Transport the Purchase Requisition release strategy with classification. The Data in each charisteristics in each PR Strategy that I have set in Dev is not getting transported to Quality.
Do I have to enter the data in characteristics again in Quality and the same procedure I have to apply for Production.
If yes, in this scenario, Can I make Production modifiable.
Regards
Sajid

Hello,
Create a special ID in PRD with access to change characteristics. This ID should be released for specific purposes and with approval (project manager/SAP support manager). You can also turn on auditing so that all activites performed are logged which can be used to satify auditors.
Cheers !

Output type is not getting triggered for ship to party in shippment output

Hi,
we have maintained output determination procedure for shipments. It was working fine.
We have just added new condition table to access sequence, and maintained the condition records also for condition type ZABC. I have checked in NACE, Application V7, I am able to find the condition type. checked in VV73, condition records displayed. But in VT02N/VT03N, we are unable to get print for the output type.
Why this is happening? we are able to see the procedure, condition type, access sequence, condition records in place ...why condition type ZABC is not getting triggered in the shipment output.
Please advise and let me know if you need more details....thanks in advance.
Thanks,
SS

Hi Noel,
Thanks for your time and reply.
We have output determination procedure for shipments, condition type ZABC, Access sequence ZABC, Condition tables 550,600,650,700 already maintained. output is working fine.we have a new requirement and created new condition table 700 with the fields" Ship to party and transportation planing point "(Condition table 700 ). we assigned the condition table 700 to access sequence ZABC. Condition type ZABC already placed in Output determination procedure.
We test the output, new condition record is not triggering in the output, even in output determination analysis also, we are unable to see the record 700 for the condition type ZABC. we are not sure what is the reason for the condition table that is not picking up ? Why condition type ZABC with condition record 700 not visible in output determination analysis.
I have checked condition records, output determination procedure. Please advise and let me know you need more details.
Thanks,
SS

PR release strategy with classification

As part of a rollout, we are migrating an instance of SAP to the template SAP. Both the SAP instances are following u2018PR release strategy with classificationu2019.
The limitation is that I can configure only two release group in PR release strategy with classification. One for overall release and one at item level release. Also, I cannot assign two different release class for the same release group. If I add additional characteristics in the existing class and keep other irrelevant characteristics as blank the release strategy doesnu2019t works. the release strategy does not triggers.
Any pointers to solve this will be highly appreciated.

Hi Ashish,
If your requirement is to have release strategy with more or different characteristics than in the existing system,you may create a new release group and assign the same to release class.There no restriction for having multiple release groups for same release class.Then create new release strategies for the newly created release group and so on.
Regards,
Edited by: Dayanandan Kamath on Oct 20, 2010 7:52 AM

Release Strategy With Classification

Hey All,
I would like to get some information about release strategy with classification for purchase requisation and purchase order.
Please send me some information regarding this.
Thanks
Kawal

hi,
To see the all the linkages firstly see the classifcation and class defined in the sap system at:
SAP easy access --> Cross application components --> classification system --> master data --> characteristics and classes(CT04 and CL02)...
TO see the customisation, check:
Spro --> MM --> Purchasing --> PO/PR etc --> Release procedure --> Rel procedure with classification --> Here check for all the different transactions...like Relase codes, release stategy, access sequence, schema etc...
Also one important point abt it is:
PR is possible to release at header as well as at item level...
But PO and other external docs are only possible to release at header level only...
In the customisation check all the linkages you will get best out of it....
Regards
Priyanka.P

Release Procedure without Classification

Hi Experts,
i have create a release strategy for the release procedure without classification, which PR document type i use for this? NB?
Do i need to assign a PR document to this release procedure?
Thanks

Hi Chun,
You can not use one release strategy with classification and one more without classification at a time in the system. Only one will work.
For your case, already you have Overall release, and I suggest you go for second class with Itemwise release. With classification, it's possible to use two release strategies at a time based on the document type. ("Overall Release " check box for document type)
Umakanth

Release procedure with classification not getting triggered

Similar Messages

Maybe you are looking for