Release Skype to Go number to use with different p...

I have a skype to go number that I use to take business calls when at the computer or to divert when I am out of the office. I have now moved into an office with a landline. Is there any chance that I can get skype to release my number so that I can use it with a BT line so that I do not have to change all of my promo material?
Thanks
Guy

Hello,
I'm afraid that wouldn't be possible.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

Can different music be used with different set of photos in a slide show?

Can different music be used with different set of photos in a slide show?

Yes. The basic idea is that you make a playlist of songs and choose that to use with the slideshow, rather than any particular song. In iPhoto 11 you can do this in iPhoto. In earlier versions you do this in iTunes.
There is a limitation. Each song will play the full way through, you can't croassfade from one to another and so on.
Alternatives to iPhoto's slideshow include:
iMovie, on every Mac sold.
Others, in order of price: PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Express $199
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Express is the most capable app of them all. You get what you pay for.

I need to get my verification code via mobile number but use a different and can't get it, how do I update my number?

I need to get my verification code via mobile number but use a different number and can't get it, how do I update my new number so that I can get the text message verification code?

Verification code for two-step verification? If so, you can register a new new number to receive the code via text message by going to https://appleid.apple.com/account/home and click on "Manage Your Apple ID" and then on "Password and Security" and then "Add or Remove Trusted Devices." You will need a verification code in order to log in so if you currently only have one and it is no longer available you will need to use your Recovery Key. More information at: Frequently asked questions about two-step verification for Apple ID - Apple Support

Cannot log into skype. I have to use a different S...

FRUSTRATION!
That is the only way I can define my mood at this point.
Wen i try to log into skype on my Xbox one it says: This Skype account is already linked with another microsoft account.
What can you do?
Use a different skype account? (NO I won't)
Create a new one? (How about noooo...)
Because (duh) I use a different e-mailadress for my Xbox Live account then I use for my Skype.
So I have been chatting with microsoft support for more then 2 hours. And I am this close | | trowing my Xbox One out of my fricking window and re-buying an xbox 360.
So I came up with the genious idea of changing my Xbox live e-mail adress. But that is harder then getting into the Kremlin. Because You cannot change a microsoft account into a different microsoft account (Great going Bill).
So Frustrations keep building up. It looks more like i'm in a pitt filled with snakes and crocs with no way of escaping and each tunnel of hope I find is filled with even more dangerous animals. So here I am. Whispering to the Gods for help.
Question. How can I use skype on my xbox one using the same account I use on Windows 8.1 and my mobile phone and tablet. etc. etc.

Understood. Here is how it works.
When you log into Xbox One with a Microsoft account (= Xbox Live account), this is the one that Skype will use.
If you want to log into different Microsoft account on Skype for Xbox One, you need to log into different Xbox One (= Microsoft account) account.
So, you cannot be logged into Microsoft account A on Xbox and into Microsoft account B in Skype.
Добавляйте баллы, если моё сообщение вам помогло. Спасибо!
Возврат денег | Система обновления подписок | Заблокировали/взломали аккаунт? | Пропали контакты? | Не зайти в Skype/не добавляются контакты? | Не удалось загрузить базу данных?
Подписки | Цены

IPop Use with different operating systems Windows And Mac Osx

so the quetion is this can i use my IPod with different Operatin systems?
I have a MacBook at home where i keep all my Music in and at the office i have a Windows network i would like to carry some music from home to the office using my IPod. I thought that a solution is to Partition my Ipod 40G in 2 parts and have one of them FAT so that my Windows operating system can view it.
Did any of you done it? and if so How? did you loose the use of some of the IPod functions?
let me Know if there are ways to carry music using your Ipod from the MacOSX to Windows Prof or home edition thanks!
Donatello

Your problem has nothing to do with data vs music. Music IS data. I've used my iPod for data and music since the first iPod was released. There's no reason to think the two OS versions are involved either.
Look at your usage practices - and I'm not necessarily suggesting you are abusing your computer. Has one of your computers crashed while the iPod was connected? This could cause data damage that might explain the problem. Have you ever disconnected the iPod without un-mounting it first?
You might also be creating fragmentation problems if you frequently add and remove data files while at the same time adding and removing music. One decision I made when I was using my iPod to transport lots of movies and photos for a project was to NOT make any music changes during that busy two week period.

Different number of parses with different providers

I tried to figure out
how could I control number of parsing from MS ADO app.
To my surprise it seems that there is no general way to do it.
The behaviour is heavily dependent on underlying OLEDB provider,
and for some of the providers (Oracle's own including)
I did not manage to reduce number of parses.
I wrote a simple vbs script that:
1. Opens the connection for the given provider
2. Executes ALTER SESSION SET session_cached_cursors=100
3. Creates ADO command with 'SELECT ... FROM USER_TABLES..'
     and with one parameter
4. Opens ADO recordset with this command, reads from and closes it
Here is the script:
'TestADOCommandParsing.vbs
Dim stConnectString
Dim stUID
Dim stPWD
Dim stTestTag
Dim stServer
Dim cn
Dim cmdALTER_SESSION
Dim cmdUserTables
Dim rsUserTables
Dim param
Dim nRows
Dim I
Const c_stProvider = "Ora" '"MS" '"ODBC" '
Const adVarChar = 200
Const adParamInput = 1
Const adUseServer = 2
Const adOpenStatic = 3
Const adLockReadOnly = 1
stUID = "..."
stPWD = "..."
stServer = "..."
stTestTag = "TestParsesADO_" & c_stProvider & "_1"
If c_stProvider = "MS" Then
stConnectString = "Provider=MSDAORA;" & _
"User ID=" & stUID & ";Password=" & stPWD & ";Data Source=" & stServer & ";"
ElseIf c_stProvider = "Ora" Then
'Oracle provider.
'The PLSQLRSet attribute [=1] specifies whether OraOLEDB needs to parse the PL/SQL
'stored procedures to determine if a PL/SQL stored procedure returns a rowset:
stConnectString = "Provider=OraOLEDB.Oracle;PLSQLRSet=0;" & _
"User ID=" & stUID & ";Password=" & stPWD & ";Data Source=" & stServer & ";"
ElseIf c_stProvider = "ODBC" Then
stConnectString = "Provider=MSDASQL.1;Extended Properties=" & _
"""DRIVER={Microsoft ODBC for Oracle};" & _
"UID=" & stUID & ";PWD=" & stPWD & ";SERVER=" & stServer & ";"""
End If
wscript.echo "Provider = " & c_stProvider
wscript.echo "stConnectString = " & stConnectString
     Set cn = CreateObject("ADODB.connection")
     cn.Open stConnectString
     Set cmdALTER_SESSION = CreateObject("ADODB.Command")
With cmdALTER_SESSION
.CommandType = 1 'adCmdText
.Prepared = False
.CommandText = _
"BEGIN EXECUTE IMMEDIATE 'ALTER SESSION SET session_cached_cursors=100'; END;"
Set .ActiveConnection = cn
End With
cmdALTER_SESSION.Execute
     Set cmdALTER_SESSION = Nothing
     Set cmdUserTables = CreateObject("ADODB.Command")
With cmdUserTables
Set .ActiveConnection = cn
.CommandType = 1 'adCmdText
'The Recordset parameters
'CursorLocation, CursorType, LockType
'seem to be irrelevant for reparsing of Oracle cursor.
'Oracle session_cached_cursors parameter also has no effect.
'Command.Prepared setting affects it, but only for ODBC-based provider:
'False: N parses, N executions
'True: 1 parse, N executions
.Prepared = True
.CommandText = _
"SELECT TABLE_NAME FROM USER_TABLES " & _
stTestTag & " " & _
"WHERE TABLE_NAME LIKE ? " & _
"ORDER BY TABLE_NAME"
Set param = .CreateParameter("TABLE_NAME_Pattern", adVarChar, adParamInput, 30, "%")
.Parameters.Append param
End With
     Set rsUserTables = CreateObject("ADODB.Recordset")
For I = 1 To 10
cmdUserTables.Parameters("TABLE_NAME_Pattern").Value = "QU_%"
With rsUserTables
'The Recordset parameters:
'CursorLocation, CursorType, LockType
'seem to be irrelevant for reparsing of Oracle cursor:
'.CacheSize = 100 'Irrelevant
'.CursorLocation = adUseServer 'adUseClient 'Irrelevant
'.CursorType = adOpenStatic 'adOpenForwardOnly 'Irrelevant
'.LockType = adLockReadOnly 'Irrelevant
.Open cmdUserTables
While Not .EOF
nRows = nRows + 1
.MoveNext
Wend
wscript.echo CStr(I) & ". nRows = " & CStr(nRows)
.Close
End With
Next
Before running tests:
VARIABLE SQLTextPattern VARCHAR2(100);
COLUMN HASH_VALUE FORMAT 9999999999
COLUMN SQL_TEXT FORMAT A40
COLUMN "Invalids" FORMAT 9999999
COLUMN "Parses" FORMAT 9999999
COLUMN "Execs" FORMAT 9999999
COLUMN "Parses/Execs" FORMAT 9999.99
COLUMN CH# FORMAT 999
COLUMN ROWS# FORMAT 9999
I ran TestADOCommandParsing1.vbs script 3 times with
different providers and table aliases to distinguish
SQL from different tests:
host cscript.exe TestADOCommandParsing1.vbs
After each run I changed table alias var:
EXEC :SQLTextPattern:='%TestParsesADO_Ora_1%';
or
EXEC :SQLTextPattern:='%TestParsesADO_ODBC_1%';
or
EXEC :SQLTextPattern:='%TestParsesADO_MS_1%';
and queried V$SQL, V$SYSSTAT.
Before running the tests:
SYSTEM@ADAS> SELECT NAME, VALUE
2 FROM V$SYSSTAT
3 WHERE NAME = 'session cursor cache hits'
4 ;
NAME VALUE
session cursor cache hits 91051
Test with Oracle OLEDB provider:
SELECT
          SUBSTR(SQL_TEXT,1,200) SQL_TEXT
          ,PARSE_CALLS PARSES
          ,EXECUTIONS EXECS
          ,CHILD_NUMBER CH#
          ,FIRST_LOAD_TIME
          ,ROWS_PROCESSED ROWS#
     FROM V$SQL
     WHERE SQL_TEXT NOT LIKE '%SQL_TEXT%'
          AND SQL_TEXT NOT LIKE '%SQLTextPattern%'
          AND SQL_TEXT LIKE :SQLTextPattern
     ORDER BY CH#
SQL_TEXT PARSES EXECS CH# ROWS#
SELECT TABLE_NAME FROM USER_TABLES TestP 21 0 0 0
arsesADO_Ora_1 WHERE TABLE_NAME LIKE :1
ORDER BY TABLE_NAME
SELECT TABLE_NAME FROM USER_TABLES TestP 0 10 1 230
arsesADO_Ora_1 WHERE TABLE_NAME LIKE :1
ORDER BY TABLE_NAME
SELECT NAME, VALUE FROM V$SYSSTAT...
NAME VALUE
session cursor cache hits 91062
Test with ODBC OLEDB provider:
SELECT ... FROM V$SQL ...
SQL_TEXT PARSES EXECS CH# ROWS#
SELECT TABLE_NAME FROM USER_TABLES TestP 1 0 0 0
arsesADO_ODBC_1 WHERE TABLE_NAME LIKE :V
001 ORDER BY TABLE_NAME
SELECT TABLE_NAME FROM USER_TABLES TestP 0 10 1 230
arsesADO_ODBC_1 WHERE TABLE_NAME LIKE :V
001 ORDER BY TABLE_NAME
SELECT NAME, VALUE FROM V$SYSSTAT...
NAME VALUE
session cursor cache hits 91062
Test MS OLEDB provider for Oracle:
SELECT ... FROM V$SQL ...
SQL_TEXT PARSES EXECS CH# ROWS#
SELECT TABLE_NAME FROM USER_TABLES TestP 11 0 0 0
arsesADO_MS_1 WHERE TABLE_NAME LIKE :V00
001 ORDER BY TABLE_NAME
SELECT TABLE_NAME FROM USER_TABLES TestP 0 10 1 230
arsesADO_MS_1 WHERE TABLE_NAME LIKE :V00
001 ORDER BY TABLE_NAME
SELECT NAME, VALUE FROM V$SYSSTAT...
NAME VALUE
session cursor cache hits 91062
As you see the number of parses (both soft and hard) differ from
provider to provider.
Provider Hard parses Soft parses Executions
ODBC 1 0 10
MS for Oracle 11 0 10
Oracle 11 10 10
It looks like there is no way to control this 'bad' behaviour of
OLEDB providers, at least from ADO level. I looked through the docs on
Oracle provider for 8.1.6, but found nothing.
There is a temptation to drop all this stuff in favour of SQL
incapsulated in PL/SQL procedures...
Any comments?

D.Bender wrote:
Hello,
What's very confusing is that it doesn't always return the same number of readings. Sometimes it is 5, then 7 and afterwards 6 without changing anything. Since it is the first program for the Keithleys at work nobody can help me. I already tried highlighting execution and retain wire values. This way I saw that the VISA write command should give the correct command but the VISA read does not return the right number of readings. In addition to that I don't get any readings on the second iteration, so I can only see some on the first. The Keithley also does not show any new measurements (at least it does not show any numbers, only the typical "----").
I can't view your file but I have experience with the Keithley 2400 so here is my opinion.
This is a common problem for new users working with buffers. The most likely cause is that you are reading the buffer BEFORE it is full. If you initiate the second measurement immediately, you will likely see a Keithley error caused by trying to set the buffer values while a measurement is in progress. The keithley will immediately return the buffer contents when asked to. You, as the programmer, must set up your LabVIEW code to wait for the buffer to fill, then read the values. While a fixed delay before reading could work, here is a better solution.
I posted my code for a I-V sweep (set voltage, measure current over a linear range) here http://forums.ni.com/t5/LabVIEW/Error-code-110-in-keithley-2400/m-p/2680579#M797618. (sorry I don't have access to the files right now to upload them here. The idea is first set the registers to watch for the buffer to become full. When full, the SRQ bit will be set to 1. After starting the measurement, i probe the SRQ value in a while loop. Once it's set to 1, read the buffer and reset registers. This method is outlined in the Keithley 24xx SMU manual (I can't remember which page).

Using with different operator

i am pedro from bolivia. My fried send me blackberry tour 9630 and this is blocked with network blocked of verizon it's possible unlocked this?.
For use with sim of my country?

I am using TS 2010. FYI
ex:
Array XX [ A_Temp,
               B_Temp,
               C_Oil Pressure,
               D_Oilpressure,
Note : A_Temp, B_Temp,C_Oil Pressure,D_Oilpressure all these parameters will be getting numerical values (dynamically) from the simulink models and also in future I may need to add parameters to this array.
Array YY [A_Temp_1,
               B_Temp_2,
               C_Oil Pressure_3,
               D_Oilpressure_4,
Note : A_Temp_1, B_Temp_2,C_Oil Pressure_3,D_Oilpressure_4 all these parameters will be getting numerical values (dynamically) from the simulink models
So my question :
I would like to verify A_Temp >= A_Temp_1
                            B_Temp >= B_Temp_2
                            C_Oil Pressure >= C_Oil Pressure_3 etc

Lightroom 5 Darkens Photos after Importing Images Used with Different Camera [NOT SHOOTING IN RAW NOR B

I seriously need help, my whole entire catalog of photos just got darkened for some reason after importing photos used with a different camera. What happened is that I imported photos taken with a different camera (Canon EOS 60D) and when I did that, it darkened all the rest of my photos (taken with Canon EOS Rebel T3). Why did this happen? This is making my photos insanely hard to edit.

If you always want Camera Neutral picture style to be applied, then open one of your images that you have imported and have changed nothing else in Lightroom. Set the camera profile to Camera Neutral and save new camera default settings. Then whenever you import that setting will be applied to all of your images.
If you don't always want that style, you could save a preset that applies the Camera Neutral picture style, and then you could choose to use that preset during the import process.
It is simply a matter of determining your workflow and then setting things the way you want them to work.

What port number to use with NTRealm

When I configured the NTRealm in the WLS console, the documentation mentioned that for NT Domain, I was supposed to provide the "name" and "port" values for the PDC machine. I gave the name of the machine on that field, but did not know what to specifiy as the "port" value. Now, when I run the "java weblogic.security.ntrealm.NTRealm..." command, I get an "Unable to adjust token privileges" exception, below which there is another exception with the words "bad domain name" in it.
That leads me to believe that its not liking the DNS name of the PDC server that I entered earlier. Can someone tell me what is this "port" value that is referred to in the docs?
Thanks.

You shouldn't have to enter a port number for the PDC. Could you point out
in the documentation where you saw this.
It should only be:
java weblogic.security.ntrealm.NTRealm user password your_PDC
Are you sure you are logged into your domain? Is that user part of the
domain? If you use an admin account for the PDC does it work?
Patrick
"Nadeem" <[email protected]> wrote in message
news:3cd96658$[email protected]..
When I configured the NTRealm in the WLS console, the documentationmentioned that for NT Domain, I was supposed to provide the "name" and
"port" values for the PDC machine. I gave the name of the machine on that
field, but did not know what to specifiy as the "port" value. Now, when I
run the "java weblogic.security.ntrealm.NTRealm..." command, I get an
"Unable to adjust token privileges" exception, below which there is another
exception with the words "bad domain name" in it.
>
That leads me to believe that its not liking the DNS name of the PDCserver that I entered earlier. Can someone tell me what is this "port"
value that is referred to in the docs?
>
Thanks.

Material number for chemical with different packing sizes

A same chemical that we purchase from supplier can be in 25Kg bag, 1000kg bag and 50 kg bag. When we receive the chemicals, the physical goods of the chemical are in 25 KG Bag, 1000kg Bag and 50Kg bag store in the warehouse.
When we sell to customer, it can be in those 3 standard bag size or in KG depend the order quantity from customer.
For the above Chemical what is the best way to catalogue the material number, should it be 3 material numbers for the 3 different pack size, or 1 material number only?

you can have two solution for this with both pros & cons with one material master:
1. You can have three different unit of measure for 25KG, 1000KG & 50KG bag and you can maintain the relationship in the material master. This will help you to get the total stock in KG in your company and you can sell to the customer. Only problem is you will not be able to determine how much of each type of packaging you have.
2. You can define the material relevant for batch management. Create three batches 25KG,1000KG & 50KG, also create three different unit of measures as explained above. Now whenever you are doing the GR just put the material in correct batch, by doing this you can easily track you material along with the type of packaging. Also you can sell the material, while delivery you can use the functional of batch determination based on some log. Only problem is manual intervention which can be covered if you use some exit while doing GR so that correct batch is selected based on the Order Unit.
Hope this will help you..
Enjoyyyyyyyyyyyyy
Akshit

Online number previously used by dodgy company

Just purchased a new online number couple of days ago.
Today I got a call through that number demanding where their product was. Huh!
Did a search using my new number and a company came up that sells products online. That number is everywhere.
It is no good for me. How do I cancel/change that number.
I need a quick fix for this as my site is about to go live.
Thanks
Adrian

Hi, Cheesecake87, and welcome to the Community,
Please do contact Skype Customer Service to request this subscription be cancelled and refunded, so you can start with a different number.
Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
If you experience difficulty reaching Skype Customer Service, try again using a different web browser and choosing a different path through the various drop-down menu options presented. Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also impede reaching an agent.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

HT204053 My daughters phone number is listed with my FaceTime and messages. How do I change to my phone number?

I have a new IPad mini and it is linked to my daughters phone number. How do I change to my phone number?

Use a different Apple ID for iMessage (and FaceTime). You can continue to share the same ID for iTunes purchasing but you should have separate IDs for each person for iMessage and FaceTime. To change the ID, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a separate ID. Then do the same thing in Settings>FaceTime.

Why connect two dhcp servers with different IP addresses?

so for an assignment at college we had to configure a router connected to two switches which both had a server connected to them.
the computers were connected via dhcp to either server however each side had a different IP. we have now been asked to justify as to why two servers were used with different IP which I cannot quite produce a business orientated answer.
I can understand connecting two dchp servers on same IP to increase fault tolerance but I do not understand using two separate IP addresses.

Hi,
Does “using two separate IP addresses“ mean 2 subnets which are connected by router？
If you have separately configured 2 DHCP servers on the 2 subnets, and want 1 of the 2 DHCP servers to provide fault tolerance for the other. You need to use an RFC 1542–compliant router, or DHCP relay agent, in order to forward DHCP broadcast traffic.
If there is any misunderstanding about your question, please correct.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

DR Site with different os

Dear all,
I have 2 servers,Sun and IBM and oracle 10gr2 .I have a plan to implement DR-site.I know a dataguard cann't using with different os,rigth?
Do you have any idea for this plan (except using dataguard)?
Thank you for advance
chara

I would be surprised if DataGuard could fulfill this role with the disparate O/S, though the MOS note shows the database needs to be non-RAC, non-TDE and at 11.2.0.2 or above. Both O/S' need to be 64-bit also. I know when I looked at this not so long ago, it wasn't an option, but now they seem to have updated it.
I would suggest GoldenGate. It's intended for logical replication between heterogeneous systems, which is basically what you're looking at. Though you might find the cost very high - one of the key selling points is to limit downtime between migration and upgrades and a lot of their main customers are banks.

How do I divide a movie into chapters with different duration?

Using Idvd, I want to divide a movie into chapters using with different duration. I´m trying to do a viedo dvd and I want each song to be a chapter, but the lengh of the songs is different

Hi
Has to be done in a movie editor like iMovie or FinalCut. And if You want a DVD as the result You should use
• iMovie HD6 - or -
• FinalCut any version
To get best possibly quality
• iMovie'08 to 11 - doesn't deliver full interlaced video over to iDVD - so there will be a quality loss
And here You can set Chapters - but there are some important things
• Do not set any Chapter mark in very beginning - as iDVD want's to set this by it self and get's confused
• No Chapter mark in any transition or within 2 sec from one - This can be worked around by from Video editor Export out as Full Quality QuickTime .mov and re-import this new file - Here You can set Chapter marks wherever You want except at very beginning.
• Titles in Chapters must not contain strange letters only A to Z and 0 to 9 are OK.
Yours Bengt W

Release Skype to Go number to use with different p...

Similar Messages

Maybe you are looking for