Release SO many times

Hi all,
The scenario is after booking sales order, i go to release sales order to run concurrent in order to get the move order number.Then release complete and i got the move order number. But I can release sales order again and again.Is this normal? Why can i run concurrent with the same sales order number many times?
Can anyine help me with this situation?
Thanks
Poy

Hi,
I don't want to do the auto allocation, before this issue happen, i can do the pick release (with no auto allocation) only once and there's nothing error.
Besides now, some sales orders can do the pick release only once but some can release more than one time as i mention before.
Please help me.
Thanks
PoyRoi

Similar Messages

Release 3.6 - Proxy password asked many times

I have to insert the password of the proxy many times.
Every characters that I write, the password is asked.
Only since release 3.6
The solution in the forum is not working.
== This happened ==
Every time Firefox opened
== Write some charaters in Google search bar

Someone have a solution?

I pad has been disabled as kids typing in wrong passcode to many times. I pad says connect to I tunes, tried to but pc asks to put in passcode to enter I tunes but as its disabled I can't type in a passcode. Any ideas ?

iPad has been disabled as kids have typed in wrong passcode too many times. Have tried to connect to iTunes to restore it but can't as PC says to enter passcode but I obviously can't as iPad is disabled. Any ideas ?

You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
You will need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

HT2513 my iCal calendar that I created with the color green keeps changing to purple. no matter how many times I change it to green, it turns it back to purple. Of course this only happens with iCloud and not "from my Mac". Any ideas?

my iCal calendar that I created with the color green keeps changing to purple. no matter how many times I change it to green, it turns it back to purple. Of course this only happens with iCloud and not "from my Mac". Any ideas on how to correct this? This seems like a trivial error, but it's super annoying.

I called Apple and they said that they know about this problem. It's a problem with iCloud which their Engineers know about. (there was a new iCloud release, hence...) No ETA for a fix yet. I asked that this be escalated so Engineering doesn't put it at the bottom of their fix list. I talked to a Senior Advisor and mentioned to them to have QA check their regression tests as this has happened before to me (the problem just didn't take this long to resolve). I like to use green too for important stuff, so I've resorted to creating a new calendar using the normal calendar green for events going forward. They could have picked another color besides green to have this problem with and I wouldn't have been so upset. ;-)

How many times can I use Migration Assistant?

Hello All,
I am planning on buying an Intel i7 iMac in the near future, and I want to take some of the files from my old Core Duo computer and move them to the i7 iMac. I'm not throwing out the Core Duo iMac, I just want some of the files on the new i7, but I don't want to clutter it up with files I don't need to move. How many times am I allowed to run Migration Assistant? Suppose one day I just want to bring over my iTunes 7 library, and my email accounts but I don't need anything else on the first day. Is it ok to just migrate those couple of things in one session and migrate other things in another session? It seems like that's how it will work but I don't know for sure.
Thanks,
Dave
This was posted from my Core Duo running OS X 10.4.11. I want to use the i7 as my main computer but still use this one (Core Duo) in another room on my WiFi network. The i7 will be taking all new emails.

Ajduguid,
That's what I did on all my other Macs as I got them. I just decided to upgrade the memory in my old slow core duo iMac to 2 Gigs and I bought the box set. So far I installed 10.6. It works but just as slowly as before, which I think is it's normal speed. But now I have the option of turning Rosetta on and off.
Now I can wait for Lion and the second generation i7 iMac to be released and be up to date on my Core Duo iMac. I'll be back when I get to migrating to a new iMac, or maybe before.
Thanks,
Dave

I have Win XP on a Dell 9100. I had FF 3.6.10 & tried many times to upgrade to 3.6.11 --- all unsuccessful. The next day, I saw 3.6.12 downloading. I seem to now have 3.6.12 . I don't know about 3.6.11 . How can I check on this?

I have had Mozilla Firefox for years. My computer is a Dell 9100 , and I use Windows XP. I have upgraded to each version of Firefox that was offered to me. Each upgrade was quick and easily done--up to, and including, Firefox 3.6.10 . I tried many times to upgrade to Firefox 3.6.11 , each time with no success. I have something like 21 copies of the downloaded Firefox 3.6.11 package. The next day, I resumed by quest to download & install 3.6.11 and saw, on my monitor, the 3.6.12 version of Firefox downloading. I don't recall how this happened. I know that I was only trying to download and install version 3.6.11 . Now, I seem to have, by looking at "About Mozilla Firefox" under "Help", Firefox 3.6.12 .
Q1. Is there a way I can check to see whether I have a valid download of 3.6.11 and/or 3.6.12 in my Firefox setup?
Q2. How can I know that all is OK, Firefox-wise? The answer to this question probably can help me a lot, in the future.
Q3. Can I delete all, or perhaps all but one, of those 3.6.11 downloads?
Q4. Any idea on why my difficulties occurred?
Q5. How might I avoid these difficulties in the future?
Thank you for your help.

Firefox 3.6.12 is the current version and it was released only a few days after the release of Firefox 3.6.11 to fix a critical security issue that was discovered. The security fix was prepared and released within 48 hours after discovery.
I do not know what caused your problems in trying to upgrade to Firefox 3.6.11, but the point is moot now. Should you have future problems upgrading, please post back here and someone will assist you.
You can keep one copy of version 3.6.11 if you wish; I usually keep 2 prior versions plus the current version.
You can download the full version(s), not just the small update, from: ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/
 
The information submitted with your question indicates that you have out of date plugins with known security issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
* Adobe PDF Plug-In For Firefox and Netscape
* Next Generation Java Plug-in 1.6.0_21 for Mozilla browsers
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use Firefox to download and SAVE the installer to your hard drive from the link in the article below
#**On the Adobe page, un-check any extra items (i.e. Free McAfee® Security Scan Plus) then click Download button
#**If you see message just under tabs, DO NOT click the Allow button, instead click below that where it says "click here to download".
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link and more information''': https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
#*After the installation, start Firefox and check your version again.
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
#* After the installation, start Firefox and check your version again.

HT1977 How many times can you download an app?

I have purchased an app from itunes store, my family has alot of devices and i want that app on all of them. we upgrade alot so how many times can you upload an app? Unlimited?

Welcome to Apple Support Communities
You can download an application in all the devices with your Apple ID as many times as you want for free. You may have to pay again for it if the developer releases an update and wants to make it paid.
It's recommended to have the same Apple ID in all your family devices, but you can also use it with a different Apple ID. In that case, you will have to let your family know your Apple ID password to update the application

How many times can you upgrade your ipad mini?

i have the ipad mini, and i would like to know, how many times you can upgrade? reason being the 3rd gerantion ipodtouch only upgrades once. for an ipad mini can i upgrade more than once, because it would be fair

There is no limit to the number of times an iPad can get an iOS update. Eventually though the iOS will evolve beyond the capabilities of the specific iPad. Tis is already the case for the original iPad. That iPad can only be updated to iOS 5.1.1 and no further. So far all iPads after that continue to receive updates when Apple releases them.

How many times can you download a song on iTunes and have it count?

I'm wondering. Someone I like have released a song on iTunes and I wanna support them and I dont mind spending a few bucks on them.
So how many times can I download a song and still have it count as an individual purchase? And what about gifting?
thanks.
-andy.

As Polydorus said, get only one download per purchase for anything you buy from the iTunes Store other than iOS apps or iBooks. I'm not sure what you mean by "individual purchase" or what you are asking in reference to gifting.
Regards.

Parallel How many times user can login to the SAP system through ITS

Hello all
We are using the ITS ---620 and following 46D R/3 system
R/3 system details:
Kernal :
kernel release :46D
O/S :SunOS 5.8 Generic_108528-05 sun4us
We would like to now, At a time How many times user can login to the SAP system through ITS
Kindly letus know if any one have idea about parameter which can restrict the end users to u201CNu201D times/ sessions.
Transaction SITSPMON/SMICM are not working in R/3 system as it is 46D.
We found that parameter u201Clogin/disable_multi_gui_loginu201D works with SAPgui logons.
System logons using the Internet Transaction Server (ITS) or Remote Function Call (RFC) are not affected by this Parameter u201Clogin/disable_multi_gui_loginu201D
I need similar parameter u201Clogin/disable_multi_gui_loginu201D for the ITS users.
Thanks

I have searched all docs and notes.
Everytime the answer is PArameter for multi_gui_logonis not applicable for SAP Gui for HTML ( Browser )
The functionality does not exist for SAP Gui for HTML.
Regards,

Since upgrading to Firefox 6 my computer has gone from staying up until yearly power failures to crashing many times a day.

VERY strange. I upgraded to 6 when it came out and it took me quite a few days later to figure out WHY I went from no crashes to nvidia driver crashes MANY times a day.
It was firefox 6.0.
I thought my nvidia drivers were out of date. They were one version behind so I upgraded. Crash.
I thought maybe some kernel interaction might be an issue so I compiled up the latest Linux 3.0.3 and re-installed the nvidia drivers.
Still crash. Took me a few more days to realize the only thing that changed on my system was Firefox. I usually upgrade without thinking.
I switched to Opera. Not a single crash in a week. So it is Firefox. I dug and dug and dug on google and found a remote reference to some acceleration added in 6. I disabled it. It still crashes. I have moved back to Firefox 5 and have run all day without a crash.
My computer at home runs about a dozen web sites, 2 X servers on separate consoles (one for standard browsing and all other functions and one for World of Warcraft gaming - I like to keep them separate), FTP, TeamSpeak server ver 2 & 3, NFS for terrabytes of media files, lets just say many things. Firefox 6 killed me.
What more info do you need. Sorry I pasted ver 5 Troubleshooting Info, but I need a special request before I run anything greater than 6 on this system again. I will do it if needed but I will need a reboot to prevent all these kernel/video driver crashes.
ONLY when I run Firefox 6. After some small usage (while watching xine videos or web browsing youtube, playing WoW, or who knows what) the screen FLASHES and I know a freeze is eminent. If I can get one last xterm up I can dmesg and see these messages or if I log in with my android phone via SSH. I still have control of the system just no display. I can reboot there or Alt-Sysrq Sync, Unmount, Boot to restart my system many times a day.
Aug 26 03:33:56 mrlinux kernel: NVRM: Xid (0000:01:00): 12, COCOD 00000000 e0014300 00000043 00000200 fe7f0f00
Aug 26 03:33:57 mrlinux kernel: NVRM: Xid (0000:01:00): 3, C 00000000 SC 00000000 M 00000420 Data fff50000
Aug 26 03:33:57 mrlinux kernel: NVRM: Xid (0000:01:00): 3, C 00000000 SC 00000000 M 00000420 Data 00810000
Aug 26 03:33:57 mrlinux kernel: NVRM: Xid (0000:01:00): 6, PE0000 0420 00810000 00000000 00000000 00000000
Aug 26 03:33:57 mrlinux kernel: NVRM: Xid (0000:01:00): 3, C 00000000 SC 00000000 M 00000420 Data 00000000
Aug 26 03:33:57 mrlinux kernel: NVRM: Xid (0000:01:00): 6, PE0000 0420 00000000 00000000 00000000 00000000
Aug 26 03:33:57 mrlinux kernel: NVRM: Xid (0000:01:00): 3, C 00000000 SC 00000000 M 00000420 Data 00040000
Aug 26 03:33:57 mrlinux kernel: NVRM: Xid (0000:01:00): 6, PE0000 0420 00040000 00000000 00000000 00000000
Aug 26 03:34:42 mrlinux kernel: NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context
Aug 26 03:35:18 mrlinux last message repeated 3 times
Aug 26 03:35:54 mrlinux last message repeated 3 times
Aug 26 03:35:58 mrlinux dhcpcd[2248]: eth0: lost lease, attemping to rebind
Aug 26 03:36:06 mrlinux kernel: NVRM: os_schedule: Attempted to yield the CPU while in atomic or interrupt context
Aug 26 03:36:42 mrlinux last message repeated 3 times
Aug 26 03:37:06 mrlinux last message repeated 2 times
Aug 26 03:37:07 mrlinux vmnet-dhcpd: select: Interrupted system call
Aug 26 03:37:07 mrlinux vmnet-dhcpd: exiting.
Aug 26 03:37:08 mrlinux vmnet-dhcpd: select: Interrupted system call
Aug 26 03:37:08 mrlinux vmnet-dhcpd: exiting.
Aug 26 03:37:11 mrlinux mountd[4656]: Caught signal 15, un-registering and exiting.
Aug 26 03:37:12 mrlinux kernel: nfsd: last server has exited, flushing export cache
Aug 26 03:37:12 mrlinux dhcpcd[2248]: eth0: netlink: No such process
Aug 26 03:37:13 mrlinux dhcpd: receive_packet failed on eth1: Network is down

That is probably rather unlikely. The updates are released ''throttled'' initially to a portion of users so that any major problems will be picked up before everyone gets it.
It is also run through a staged procedure releasing as six weeks each in Nightly -> Aurora -> Beta versions. Although some code change will occur in that process. The Releases also must also pass automated testing.
Once the Release happens then we can look for problems showing up from: the crash reporter, the input feedback, telemetry,and comments on this forum.
Problems do and always will get through but it is unlikely a problems causing Firefox not to start would go unnoticed unless it only affected a vanishingly small proportion of users (nearly 1/2 Billion total),and then it would possibly be because of specific hardware or interactions with other software.
Malware
Presumably you installed the conduit plugin deliberately and like it. A simple web search suggests many users may be unhappy with that software. Search
* [https://www.google.co.uk/search?q=conduit+plugin&hl=en&btnG=Google+Search&sourceid=Mozilla-search&start=0 conduit plugin]
**[https://www.google.co.uk/search?q=conduit+plugin&hl=en&btnG=Google+Search&sourceid=Mozilla-search&start=0#hl=en&q=conduit+malware conduit malware]
It is suggested that you scan with multiple varied and up to date tools not just one as they tend to pick up different things.
I should possibly have also included a direct link to
* AdwCleaner tool download http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner
* the above link is in [[Troubleshoot Firefox issues caused by malware |the kb]] article

ITunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times.

iTunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times. Please help.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Server0 process in yellow and in status "starting apps" from many times

Hi to all,
platform windows/SQL
I have a problem , I just made a system copy of my BI-Java (NW 7.0 SR3 ) using database independent system copy method.
I make the export : all OK.
I make the import ( system copy tool sapinst ) : All ok without errors.
Now I'm tryng to start the Java ap server ( ABAP IS UP AND WORKS ) but it doesn't start : in MMC I see the java server0 process in yellow and in status "starting apps" from many times.
Please help , what can I do ?

I Eric ,
I waited , but still yellow :
here is the dev_server0 , it is very very long file so i post most important parts of the log
trc file: "F:\usr\sap\JBX\JC00\work\dev_server0", trc level: 1, release: "700"
node name   : ID5856350
pid         : 2460
system name : JBX
system nr. : 00
started at : Mon Nov 15 18:32:02 2010
arguments       :
       arg[00] : F:\usr\sap\JBX\JC00\exe\jlaunch.exe
       arg[01] : pf=F:\usr\sap\JBX\SYS\profile\JBX_JC00_sappino
       arg[02] : -DSAPINFO=JBX_00_server
       arg[03] : pf=F:\usr\sap\JBX\SYS\profile\JBX_JC00_sappino
[Thr 1676] Mon Nov 15 18:32:02 2010
[Thr 1676] *** WARNING => INFO: Unknown property [instance.box.number=JBXJC00sappino] [jstartxx.c   841]
[Thr 1676] *** WARNING => INFO: Unknown property [instance.en.host=sappino] [jstartxx.c   841]
[Thr 1676] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c   841]
[Thr 1676] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
JStartupReadInstanceProperties: read instance properties [F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties]
-> ms host    : sappino
-> ms port    : 3901
-> OS libs    : F:\usr\sap\JBX\JC00\j2ee\os_libs
-> Admin URL :
-> run mode   : normal
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
Instance properties
-> ms host    : sappino
-> ms port    : 3901
-> os libs    : F:\usr\sap\JBX\JC00\j2ee\os_libs
-> admin URL :
-> run mode   : normal
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID5856300 : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID5856350 : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID5856300            : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
-> [01] ID5856350            : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
[Thr 1676] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 1676] JLaunchRequestQueueInit: create pipe listener thread
[Thr 2796] JLaunchRequestFunc: Thread 2796 started as listener thread for np messages.
[Thr 1116] WaitSyncSemThread: Thread 1116 started as semaphore monitor thread.
[Thr 1676] Mon Nov 15 18:32:03 2010
[Thr 1676] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 1676] CPIC (version=700.2006.09.13)
[Thr 1676] [Node: server0] java home is set by profile parameter
     Java Home: C:\JAVA_SDK_64BIT
[Thr 1676] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\JBX\JC00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID5856350]
-> node name          : server0
-> node type          : server
-> node execute       : yes
-> jlaunch parameters :
-> java path          : C:\JAVA_SDK_64BIT
-> java parameters    : -Djco.jarm=1 -verbose:gc -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -XX:NewSize=341m -XX:MaxNewSize=341m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:DisableExplicitGC -XX:PrintGCDetails -XX:+PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
-> java vm version    : 1.4.2_26-b03
-> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type       : server
-> java vm cpu        : amd64
-> heap size          : 2048M
-> init heap size     : 2048M
-> stack size         : 2M
-> root path          : F:\usr\sap\JBX\JC00\j2ee\cluster\server0
-> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path       : F:\usr\sap\JBX\JC00\j2ee\os_libs
-> main class         : com.sap.engine.boot.Start
-> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path     : F:\usr\sap\JBX\JC00\exe\jstartup.jar;F:\usr\sap\JBX\JC00\exe\jvmx.jar
-> shutdown class     : com.sap.engine.boot.Start
-> parameters         :
-> debuggable         : no
-> debug mode         : no
-> debug port         : 50021
-> shutdown timeout   : 120000
[Thr 1676] JLaunchISetDebugMode: set debug mode [no]
[Thr 2372] JLaunchIStartFunc: Thread 2372 started as Java VM thread.
[Thr 2372] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
     Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack   : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djco.jarm=1
-> arg[ 4]: -verbose:gc
-> arg[ 5]: -Djava.awt.headless=true
-> arg[ 6]: -Dsun.io.useCanonCaches=false
-> arg[ 7]: -Djava.security.policy=./java.policy
-> arg[ 8]: -Djava.security.egd=file:/dev/urandom
-> arg[ 9]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 10]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 11]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 12]: -XX:NewSize=341m
-> arg[ 13]: -XX:MaxNewSize=341m
-> arg[ 14]: -XX:MaxPermSize=192m
-> arg[ 15]: -XX:PermSize=192m
-> arg[ 16]: -XX:+DisableExplicitGC
-> arg[ 17]: -XX:+PrintGCDetails
-> arg[ 18]: -XX:+PrintGCTimeStamps
-> arg[ 19]: -XX:SurvivorRatio=2
-> arg[ 20]: -XX:TargetSurvivorRatio=90
-> arg[ 21]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 22]: -verbose:gc
-> arg[ 23]: -Dsys.global.dir=F:\usr\sap\JBX\SYS\global
-> arg[ 24]: -Dapplication.home=F:\usr\sap\JBX\JC00\exe
-> arg[ 25]: -Djava.class.path=F:\usr\sap\JBX\JC00\exe\jstartup.jar;F:\usr\sap\JBX\JC00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 26]: -Djava.library.path=C:\JAVA_SDK_64BIT\jre\bin\server;C:\JAVA_SDK_64BIT\jre\bin;C:\JAVA_SDK_64BIT\bin;F:\usr\sap\JBX\JC00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;c:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;F:\usr\sap\JBX\SYS\exe\uc\NTAMD64
-> arg[ 27]: -Dmemory.manager=2048M
-> arg[ 28]: -Xmx2048M
-> arg[ 29]: -Xms2048M
-> arg[ 30]: -Xss2M
-> arg[ 31]: -DLoadBalanceRestricted=no
-> arg[ 32]: -Djstartup.mode=JCONTROL
-> arg[ 33]: -Djstartup.ownProcessId=2460
-> arg[ 34]: -Djstartup.ownHardwareId=M1883233260
-> arg[ 35]: -Djstartup.whoami=server
-> arg[ 36]: -Djstartup.debuggable=no
-> arg[ 37]: -Xss2m
-> arg[ 38]: -DSAPINFO=JBX_00_server
-> arg[ 39]: -DSAPSTARTUP=1
-> arg[ 40]: -DSAPSYSTEM=00
-> arg[ 41]: -DSAPSYSTEMNAME=JBX
-> arg[ 42]: -DSAPMYNAME=sappino_JBX_00
-> arg[ 43]: -DSAPDBHOST=SAPPINO
-> arg[ 44]: -Dj2ee.dbhost=SAPPINO
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
[Thr 2372] Mon Nov 15 18:32:04 2010
[Thr 2372] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 3844] Mon Nov 15 18:32:07 2010
[Thr 3844] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 3844] Mon Nov 15 18:32:08 2010
[Thr 3844] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 3844] Mon Nov 15 18:32:09 2010
[Thr 3844] JLaunchISetClusterId: set cluster id 5856350
[Thr 3844] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 3844] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Mon Nov 15 18:33:09 2010
66.769: [GC 66.779: [DefNew
Mon Nov 15 18:33:12 2010
: 174592K->12719K(261888K), 2.4968787 secs] 174592K->12719K(2009856K), 2.5007114 secs]
Mon Nov 15 18:33:28 2010
85.012: [GC 85.019: [DefNew
Mon Nov 15 18:33:31 2010
: 187311K->15802K(261888K), 2.9950002 secs] 187311K->15802K(2009856K), 2.9962968 secs]
Mon Nov 15 18:33:42 2010
99.362: [GC 99.363: [DefNew
Mon Nov 15 18:33:43 2010
: 190394K->18114K(261888K), 1.3817075 secs] 190394K->18114K(2009856K), 1.3817727 secs]
Mon Nov 15 18:34:04 2010
121.270: [GC 121.270: [DefNew: 192706K->22709K(261888K), 0.4353252 secs] 192706K->22709K(2009856K), 0.4354424 secs]
Mon Nov 15 18:34:14 2010
131.077: [GC 131.079: [DefNew
Mon Nov 15 18:34:15 2010
: 197301K->29493K(261888K), 0.9813876 secs] 197301K->29493K(2009856K), 0.9823920 secs]
[Thr 3344] Mon Nov 15 18:34:36 2010
[Thr 3344] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
Mon Nov 15 18:34:44 2010
160.965: [GC 160.966: [DefNew
Mon Nov 15 18:34:47 2010
: 204085K->40068K(261888K), 3.8189779 secs] 204085K->40068K(2009856K), 3.8194810 secs]
[Thr 3532] Mon Nov 15 18:34:54 2010
[Thr 3532] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 4932] Mon Nov 15 18:34:57 2010
[Thr 4932] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
Mon Nov 15 18:35:09 2010
186.312: [GC 186.315: [DefNew: 214660K->44513K(261888K), 0.4742509 secs] 214660K->44513K(2009856K), 0.4773469 secs]
[Thr 3844] Mon Nov 15 18:38:32 2010
[Thr 3844] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
Mon Nov 15 18:39:18 2010
435.575: [GC 435.576: [DefNew: 219105K->48184K(261888K), 0.2394759 secs] 219105K->48184K(2009856K), 0.2397480 secs]
Mon Nov 15 18:39:20 2010
Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.TypeMappingImpl::initializeRelations
Mon Nov 15 18:39:23 2010
440.506: [GC 440.506: [DefNew: 222776K->50686K(261888K), 0.1335379 secs] 222776K->50686K(2009856K), 0.1335965 secs]
Mon Nov 15 19:42:07 2010
[Unloading class sun.reflect.GeneratedMethodAccessor14]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor127]
[Unloading class sun.reflect.GeneratedMethodAccessor13]
[Unloading class sun.reflect.GeneratedMethodAccessor105]
[Unloading class sun.reflect.GeneratedMethodAccessor99]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor135]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor4]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor96]
[Unloading class sun.reflect.GeneratedMethodAccessor128]
Mon Nov 15 19:42:08 2010
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor17]
[Unloading class sun.reflect.GeneratedMethodAccessor119]
[Unloading class sun.reflect.GeneratedMethodAccessor64]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor29]
[Unloading class sun.reflect.GeneratedMethodAccessor47]
[Unloading class sun.reflect.GeneratedMethodAccessor86]
[Unloading class sun.reflect.GeneratedConstructorAccessor72]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor14]
[Unloading class sun.reflect.GeneratedMethodAccessor109]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor82]
[Unloading class sun.reflect.GeneratedMethodAccessor156]
[Unloading class sun.reflect.GeneratedMethodAccessor147]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor94]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor65]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor93]
Mon Nov 15 19:42:09 2010
[Unloading class sun.reflect.GeneratedMethodAccessor107]
[Unloading class sun.reflect.GeneratedMethodAccessor142]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor2]
Mon Nov 15 20:19:06 2010
: 1488916K->1046521K(1747968K), 3204.1629115 secs] 1749638K->1046521K(2009856K), 3204.1631834 secs]

Why since installed Lion on my IMac it happened many times that my computer freeze and I have to restart everything before something work again?

Why since installed Lion on my IMac it happened many times that my computer freeze and I have to restart everything before something work again?

To get rid of "pop-up ads and other crap on my computer when I am on the internet", click on Safari in the Menu bar, and select Preferences. Next select Extensions. Delete all of them. Restart Safari.
The first step in addressing the black screen is an SMC reset.
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Excerpt from
http://support.apple.com/kb/ht39

I brought new Ipad air, when ever I try to delete apps, ipad air crashes, tries many times unable to remove apps.

I brought new Ipad air, when ever I try to delete apps, ipad air crashes, tries many times unable to remove apps.

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.

Release SO many times

Similar Messages

Maybe you are looking for