Release Strategy ERROR in SAP-MM

Dear gurus,
I got a error while doing release strategy in SPRO. When click the Classifiaction button this error shows below:
ERROR: Error in classification(class TITAN CLASS RP class type 032)
Kindly give me brief solution for this error.
Regards,
Raju

Dear Raju,
The problem is that class and characteristics are available on system but the classification is missing. It arises among other reasons, if the release strategy has No classification.
You may need to transport again the classification data.
Regards,
ian, Wong Loke Foong

Similar Messages

  • Service entry sheet Release strategy Error

    Hi Guys
    I have one scenario where Iam not able to post Service enrty sheet
    We have release strategies A1,A2,A3,A4,A5
    Some service entry sheets are there in the system with each release strategy
    We have deleted A2,A3,A4,A5 and A1 remains there
    While release the service entry sheets which are having Release strategies A2,A3,A4,A5
    We are facing problems not able to release
    please provide any solution to this error ,
    It is not possible to restore previous release strategies A2,A3,A4,A5
    We need to change release strtegy A2,A3,A4,A5 to A1 for existing service entry sheets
    Please suggest solution.
    Thanks in Advance
    SAP MM

    Hi,
    You are created release strategies A1, A2, A3, A4 & A5 and now deleted A2, A3, A4, A5 but A1 remains there in the system.
    You could have take precaution ieu2026u2026all SES should be released 1st and then deleted youu2019re release strategies A2, A3, A4 and A5.
    For quick solution------ >As now deleted A2, A3, A4, A5 and you want to triggers A1 only for all already created service entry sheet(SES) , then just go to all created SES, do some changes( like change quantity and then retrieve the original quantity in SES) by editing SES and see how re- triggers release strategy A1.{ 1st do it for one SES(as SES number created, you will have same SES number after changes in SES) and try  for all SES}
    Regards,
    Biju K

  • PO Release strategy, error: class POCLASS class type 032

    All SAP Gurus,
    We are configuring new PO release strategy.
    When we go to Release strategy - classification
    (Release procedure for PO - Define release procedure for PO - Release Strategies - classification)
    It gives following error: Error in classification (class POCLASS class type 032).
    Where we can maintain the classification?
    Regards,

    Dear,
    Please follow bellow detail.
    SPRO -> Material Management -> Purchasing -> Purchase Order -> Release Procedure for Purchase Orders.
    Three steps involved in release process of purchase order.
    1)     Edit Characteristic: -
    Create characteristic for release purchase order. If you want to release purchase order on purchasing group base. So you can create characteristic for purchasing group. Take reference of CEKKO structure and BKGRP field for purchasing group in additional data of characteristic. E.g :- Purchasing group - BKGRP
    2)     Edit Class: -
    After creation of characteristic, create class for release purchase order. In which you can take reference of
    Class Type: - 032,
    Status: - Release,
    Class group: - Release strategy class,
    And put reference of your characteristic, which are created by you in first step.
    E.g: - Class - REL_PO
    3)     Define Release Procedure of purchase order: -
    In this step four processes involved.
    1)     Release Groups
    2)     Release Codes
    3)     Release indicator
    4)     Release Strategies
    1)     Release Group: - In which you can define release strategy group
    For Exa.: - Release group : - 01,Release object: - 01, Class: - REL_PO.
    2)     Release code: - In which you can define release code. Enter value as
    Release group: - 01,release code: -01 - Purchase Head,
    Release group: -01, release code: - 02 - Auditor.
    3)     Release indicator: - In this step you have to define release indicator.
    Like X - Blocked, I - Under process, S - Release.
    4)     Release Strategy: - This is the final step for release strategy.
    Assign release code 01, 02.
    Click on release prerequisites, select 02 - check box and click on continue.
    Click on release status button, enter release indicator X, I, S and click continue
    Click on classification button, Enter values of purchasing group for which you want to created release strategy.
    Regards,
    Mahesh Wagh

  • Mm pr-po release strategy : error

    Dear MM experts,
    We already having MM-rel strategy for PR & PO with classification procedure and working fine,
    Now business requirement is to change the MM-Rel PR& PO strategy,
    New mm-rel strategy for PR customised in class 032  (not to use existing release groups & release strategies) 
    After doing config settings in customising client, the request moved to another client for testing.
    Testing client, request moved successful, and while checking the settings in testing client,
    in Release Strategies - details mode
    Informatination is available at Release pre-requisites, Release Statuses without any error,
    but when we try for Classification, we are getting the following error
    "Error in classification (class PRREL class type 032)"
    Can u please suggest what needs to be done so that we can go ahead further.
    Kindly note while doing config setting client, we did not encounter the above error, it has accepted all the settings (copy existing rel group & having differnt rel strategies, etc)
    pl help
    Thanks in advance
    Srihari

    Hi Friends,
    My requirement is to add new release strategy for pr & po.
    Characteristics & Class are remain unchanged.
    Pl advise to how to proceed, i mean
    i have to set/create new release procedure, ie.,
    New release groups
    New release codes (bcos new codes are added & release levels remained same)
    New release strategies
    How i can retain the Old PRs & POs released with earlier release strategy/release codes?
    PRs & POs not released can be with new release strategy,  but i have to ensure the old prs & pos (released) were with earlier release strategy & release code.
    Also, I need ur advise, how the new release strategy works for workflow
    pl help
    thanks & regards
    Srihari

  • PO Release Strategy error

    The following error showing up when I try to setup PO release strategy, Can someone help, please?
    I try to do the everything following error states, but no luck. I am getting all RED Lights..
    <b>Release strategy R for release group  is inconsistent
    Message no. ME_RELCHK058
    Diagnosis
    Release strategy R is not allowed because the associated release group  no longer exists.
    Procedure
    1. Re-create release group .
    Note
    The release codes and release strategies for a release group are only displayed if the release group still exists. Therefore you must create release group  in order to delete the release codes and release strategies.
    2. Delete the release strategies and release codes for release group .
    3. Then delete release group .</b>

    I tried that. Easy, but it didn't worked. Following is technical description of error
    Message Text
    Release strategy R for release group  is inconsistent
    Technical Data
    Message type__________ E (Error)
    Message class_________ ME_RELCHK (Check Customizing for Release Strategy)
    Message number________ 058
    Message variable 1____ 
    Message variable 2____ R
    Message variable 3____ 
    Message variable 4____ 
    Message Attributes
    Level of detail_______ 3 (Level of detail 3)
    Problem class_________ 
    Sort criterion________ 
    Number________________ 1

  • Release Strategy Error

    Hi All, 
    We are in Classic scenario and for the PO in backend we have applied Release Strategy. However, for the PO with approval we are getting error as per the below screenshot. Could you please let me know the possible reason?
    Thanks,
    Sunil

    Hello Sunil,
    click onto the hyper-link from step in error to get error details.
    Regards.
    Laurent.

  • Release strategy error in RFQ

    Dear MM gurus
    I have maintained all the steps for release strategy for RFQ, while clicking on release flag in ME42 it is giving following error. please guide
    Purchasing document 6000000015 not subject to
    release strategy
    Thanks in advance
    kailash N. thakkar
    9869171090

    Hai,
          Release strategy gets effected when all the characteristics mentioned for the release strategy are complied otherwise the strategy will not affect the RFQ.You might have given any value not relevant to the characteristic.For eg you might have given alower value than the value mentioned for the characteristic RFQ value.
    Regards,
    Gangadhar

  • Contract Release Strategy - error

    Hi Guys
    I have one problem in Defining Release Strategy for Contract.
    scenario : i want to create RS for PR,Contract and PO for all the three.
    Well i am able to create RS for PR and PO but when i try to make RS for contract , it doesnt work.
    it give information message : - Purchasing document XXXXXXXXX not subject to RS. and "Message no. ME298"
    I am using the Same Table CEKKO for making the RS of contract.
    Characteristic
    1) GNETW - >=000*
    2) BSTYP - A CHECK BUTTON COMES FOR SELECTION:
    K Contract
    *F Purchase Order
    3) BSART - A CHECK BUTTON COMES FOR SELECTION:
    MK/ WK - Contract
    NB Purchase Order
    I have make the RS like this :
    Class : Est_lib_CEKKO
    Release Group : CO - for Contract/ PA and PB - for PO
    Release Code : CA/ AA/AB
    WHERE : CO -> CA, PA and PB --> AA/AB
    Release Indicator : 0 - RELEASE
    1 - BLOCKED
    in classification for CO
    1) GNETW : >=00,1
    2) BSTYP : K
    3) BSART : MK/WK
    If someone knows how to fix it, please i thank you.
    Regards
    Antonio Oliveira

    Hi,
    PO release strategy working fine, then you should not have any problem now for contract also as you have separate release group for contract CO, have own release indicators( PO & Contract)  and have following in RS of contract in classification
    1) GNETW : >=00,1
    2) BSTYP : K
    3) BSART : MK/WK
    Just change <=000 in GNETW and save, now try creating contract to have difference.
    Generally value are to be in GNETW others follow as per business (it may differs company to company) are as like example <=100000, 100000.01-1000000.00 & 1000000.01-20000000.00, > 20000000.00
    Regards,
    Biju K

  • PR release strategy-ERROR

    Gurus,
    I am trying to assign for PR rel strategy,i am getting this error.
    Error in classification (class RP_XX class type 032)
    Message no. ME179
    Procedure
    Please check the specified class or class type in Customizing for the release procedure.
    What should be done

    Seems like you are applying classification view to a system which is not customizable.
    You need to use tcode: CL20n/Cl24n to populate the classification view  in case of system uncustomizable.
    PR Release : Error in Classification
    Classification error
    Error in classification (class CLASS-PLANT class type 032)
    Edited by: Afshad Irani on Jul 6, 2010 1:07 PM

  • Work flow in release strategy..?

    Hi experts
    Can anybody expalin me what is Work flow in release strategy .
    Exaplain me with some examples for Work flow in release strategy.
    Thanks
    SAP-mm

    You have to carry on the following activites:
    1) Define Organisation Struture
    2) Application specific customizing
    A) Define Characteristic values
    B) Define release codes and make them Workflow relevant
    C) Define release strategy
    Based on the characteristic values the Purchase Order will be applied to a particular release
    strategy and will fall under specific catagory to pass through different level of approvals
    D) Assign release codes to corresponding Orgnisational Objects with ID
    3) Task specific customizing
    A) Activate the event linkage for the standard workflow WS20000075
    B) Do the agent assignment for the TS20000166
    C) Make other two tasks as General Tasks (TS20000168,TS20000167).
    4) Delete the row for event "Releasestepcreated" from SWEC (OSS Notes: 797775)
    Hope this will help you

  • Purchase Req release strategy help

    PR's generated from MRP are being blocked, however when I convert a planned order from MRP into a PR it is automatically released. I want MRP generated Reqs to be also released. I tried creating a new class, characteristic and strategy group but ran into problems when assigning the class to the group. Basically we just want all reqs created from MRP to be released and not go through workflow. Any ideas? My inital thought was to use the creation indicator EBAN-ESTKZ with the value of B (MRP) and U (converted planned orders)

    hi Ryan
    U can use only one release class in PR release strategy
    error is because ur trying to use another class add the charactaristics ib existing class and configure release strategy
    Vishal...

  • User Exit for getting Purchase Requisition Release Strategy

    Hi Experts,
    When a user creates a PR I need to know the user exit I need to implement so that the First Approver (Processor) text  in the Release Strategy is populated from a custom table. I have seen that the field is MEREL_S_GRID1-STEXT. I also need to know if I can implement a user exit so that it pulls the release strategy for a PR for assets (Acct Category A) since it is pulling for Acct Category K (Cost Centre) and the Release Strategy tab is appearing in this case.
    Kind Regards,
    Darlington

    Hi Meenakshi,
    Thanks for the very useful answer. It has given clues on how to resolve this issue. I have resolved this issue for the Asset item category using the following thread: user exit for requisition release strategy, and also SAP Note 365604.
    However, I have another issue, the release strategy for Stock Items, (item category blank) is not pulling through. I need to use the same method above but would like to know how it determines the funds centre for a specific stock item. I couldn't find where that is implemented in the material master and I need info on how to determine the account assignment for stock items based on the funds centre.
    Regards and Thanks.

  • How to have more than 8 release code for a release strategy

    Hi,
    In standard only 8 level of release is possible for a release strategy.  Our client requires more than 8 levels i.e., more than 8 release codes for a release strategy.  How can we achieve this?
    Pls provide your views/ideas.
    Reards,

    Hello,
    In case you require more than 8 levels in release strategy , write to SAP, maybe they could give a fitting reply.
    By the way , 8 levels of release should be more than enough . Try to incorporate the client business process
    within this.
    Regards
    Anis

  • Problem with my release strategy (PR), Please help

    Folks,
    I have designed a release strategy with three characteristics:
    This is what I entered in characteristic
    1.PRQuantity with table name MEREQ3211GRID and  Field :MENGE
    2.PRmaterial # with table name RMMG1 and  Field :MATNR
    3.PRPlant with table name RMMG1 and  Field :werks
    the value for PRQuantity is >= 10000,000.
    Also, I have set the indicator for (allow interval) in characteristics
    Classes, procedure with classification, Release startegies are all proper.
    I am getting the Release startegy tab in PR, but the problem is when I adopt a PR to create a PO with PO quantity >=10000, the release starategy gets picked up, which is perfect but it is also getting picked up with PO Quantity <=10000.
    I dont understand why is it getting picked up for <=10000..Please suggest!!
    Thanks in advance!!
    Megha

    Megha,
    In your original post you said,
    "1.PRQuantity with table name MEREQ3211GRID and Field :MENGE
    2.PRmaterial # with table name RMMG1 and Field :MATNR
    3.PRPlant with table name RMMG1 and Field :werks"
    Per documentation I have seen, the table you should use for your characteristics for PRs should be CEBAN and CEKKO for POs.  Here are some links to SAP notes you may find useful.
    [365604 - Release strategies in purchasing|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=365604]
    [493900 - Release Strategy|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=493900]
    [672719 - Release strategies in the service|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=672719]
    Note 365604 may be by far the most descriptive of how to set up the entire process.  Hope this helps if you are still having problems.
    Regards,
    Paul

  • Release strategy for sales orders

    Hello Gurus,
    My customer has got a requirement of approval of sales order before it actually goes for dispatch, (it is inline with the purchase release strategy).
    Hope, SAP does not have a standard solution for this but I understand this can be done through the  "status profiles". I dont have any idea how exactly this can be configured, can someone help on this?  Please guide with the stepwise configuration.
    Thanks in advance.
    Ajit Patro

    Hi,
    User statuses are always defined in a status profile.
    Procedure
    First, you create a status profile.
    Assign the corresponding object types to the status profile.
    Define the required user statuses in the status profile.
    Assign the user statuses to the corresponding business transactions.
    If necessary, translate the status profile and the user statuses.
    To be able to work with a status profile, you first need to assign it to the order type in Customizing (Customizing for Shop Floor Control by choosing Master Data - Order - Define Order Types).
    For information on how to create a status profile, see Customizing for Shop Floor Control by choosing Master Data - Order - Define Status Profile.
    You have to activate the customized status profile.
    Regards,
    Siddharth.

Maybe you are looking for