Release strategy for goods reservation.

Hi Experts,
I have client requirement for developing a custom release strategy for goods reservation in MM since there is no such strategy available in standard SAP.
Would you please give some idea on how to go about it?
Thnx in advance.
Sudipto Choudhury.

Hello Sudipto,
Welcome to SDN.
This is a really a large development and you need to talk to your MM consultant about the Functional spec.
AS you need to find the flow first.
Hope you understand what I mean. Without FS it is not possible to help.
Regards,
Suvendu

Similar Messages

Release strategy for manual reservations

hi!
Is it possible to have a Release strategy for manual reservations ? how?
Regards,
Rajiv Kane

Dear,
There is no release procedure exists for Reservations in SAP.
1. Either remove authorizations for MB21 to the low level employees and give authorizations for CREATE / CHANGE / DELETE reservation trans to management only.
2. Or else instruct inventory people to only make movements (issues) against the printed signed copy of reservation from the concerned manager. Only the user brings the reservation print with manager sign or seal, then only the material can be issued.
Meantime, instruct the management to time follow goods issues reference to reservations timely.
Regards,
Syed Hussain.

Release Strategy for reservation created from PM and PS

Dear All,
How to configure the release strategy for reservation generated from PM and PS.
Regards,
Atanu

do you talk about release strategie for requisitions, or really reservations?

How to setup a release strategy for store generated purchase order

Hi there,
Does anybody know how to setup a release strategy for store/plant generated purchase order? I have a request from our client, but I never cross this before. Please help and let me know the step with every single detail.
Greatly thank for your help.
Kind Regards,
2tea

Please go thru the below Release Procedure and check whether you have maintained all the settings properly.
PO RELEASE STRATEGY
The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
CT04 - Create Characteristic e.g. NETVALUE
Click Additional data Table name CEKKO Field name GNETW and press enter
(for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
In the Basic data (X refers to tick),
X Mutliple values
X Interval values
In the Value data, in the Char. value column, type >10000 and press enter
Save your data
CL02 - Class
Class - Create REL_PUR
Class type - 032
Click Create
Description - Release Procedure for Purchase Order
In the Same Classification section, click Check with error
In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
OMGS - Define Release Procedure for Purchase Order Type
Release Group - New entries
Rel.group Rel. Object Class Description
02 REL_PUR Rel. Strategy for PO
Release codes - New entries
Grp Code
02 01
Release indicators
Release indicators Release Description
0 Blocked
1 X Release
Release Strategy
Release group 02
Rel.strategy 01
Release codes 01
Release status 01
Classification Choose your check values
OMGSCK - Check Release Strategies
(make sure there are no error messages)
Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
The person with the release authorization have to use ME28 to release the Purchase Order.
Regards,
Ashok

Release Strategy for contracts.

Hi gurus,
Good day,.
Please help on this.
We have a release strat for Contract. It is working fine when a contract is created, but when several changes were made on the Quantity, release srtat are not being triggered.
Example.
Contact created with qty 1000 --> release status is blocked. Then release it in ME35.
After releasing, quantity was updated to 1200--> release status is blocked. Then release it in ME35.
After releasing, quantity was updated to 1100--> release strategy was not triggered. Status was released.
what is the standard functionality for this? Should the decrease in quantity will trigger release strategy or not?
Thank you.

Dear Acel,
The example you given was working just fine and correct.
a)Contact created with qty 1000 --> release status is blocked. Then release it in ME35.
b)After releasing, quantity was updated to 1200--> release status is blocked. Then release it in ME35.
c)After releasing, quantity was updated to 1100--> release strategy was not triggered. Status was released.
-> The release strategy will only be reset if the total net value for the contract was higher the previous
value but not lower.
As your example, quantity was updated to 1200, then it will reset when changing from 1000
to 1200. However when it was decrease to 1100, then it will not reset anymore as you had
release it for a quantity of 1200, then the total net value should higher than the current qty = 1100.
In system, it always assume if you had approved for the total value of the higher 1 before, then
it should be fine for the lower total net value for your management and therefore not need to re-approve
again for redundancy job. This was very logic in common business scenario in many companies.
However, like in your example , if you had define a different release strategy for a value that met the
the 1100 quantity, it will redermine the different release strategy. For example:
USD 1 for every quantity = 1
Then your contract will be USD 1000 for quantity = 1000, USD 1100 for quantity = 1100 and
USD 1200 for quantity = 1200.
Release strategy A for 1000 , characteristics from USD 1000- lower than 1100
Release strategy B for 1100 , characteristics from USD 1100- lower than 1200
Release strategy C for 1200 , characteristics from USD 1200 onwards
Then if you change the quantity from 1200 to 1100, it will redetermine the release
strategy B which means from Release strategy C to Release strategy B. If you
only had Release strategy C that had a characteristics from 1000-1200, then
it will keep the Release strategy C as released and it won't be reset unless
if you had change it and the condition of the total net value was higher than any value
before.
Hope this will explain the logic.
Ian Wong

Release strategy for Return PO

Hi,
Can we create Release strategy for Return PO's. ?
Regards
Sunil

Hi,
The process for return PO is:
Process:
- Create a return PO
- Create a outbound delivery
- Goods issue
Release Strategy can be created for All Document Types as Document Types being one of the determining factors for Release strategies. So under Classification data Characteristics which we maintain determine the release strategies for a Particular Purchasing documents. Actually it depends on your Business case that for what all documents you want to have a release strategy config.
regards,
Prashant Rathore.

Release Strategy for PO not kicking in

Hello SAP Experts,
I have gone through all the steps of configuring release strategy for PO. I checked at the end with the transaction code OMGSCK and everything is good with no error. But when I test the strategy by creating a PO, the 'Release Strategy' tab does not come on in the PO Header. This means that the Release Strategy did not work. I have troubleshot over and over again right from the Characteristics/Class, all the way to the Release Strategy, but no breakthrough.
I will appreciate and award points for helpful hints.
Thank you in advance.
Joel.

Please list all your char you have created and the value of char.
Than please tell the PO details.
once i got this info than only i can see the problems.
you can do one more thing
goto CL30n and enter the class and class type 032
than hit enter and enter the value of char which you have used in the PO and then hit find initial class button from top menu
see if any release strategy is pulled or not?
if it is determine morethan one that means you have same value exist in more than one release strategy

Release strategy for MRP generated PR.

Dear friends,
Can we have release strategy for MRP generated purchase requisitions.....
What are the steps required if yes.....
Plz. suggest....
Thanks in advance
Navin

HI,
IF you want to characteris MRP genrated PR then you have to define different document type other than the standrad one.
For this MRP define the release stratergy has usual procedure.
In case if ou dont have a different document type also the standard release procedure which you have conffigured will hold good.
Thanks & Regards,
KIran

Release strategy for Invoice

Dear All,
Can we have a Release strategy for the invoices ? Here my client wants to have approval for all the invoices irrespective of whether there is variation or not. They don't want to park & post option also.
regds,
CB

Hi,
For Inovices there is no release strategy but you can use
If an invoice item containing a large amount is entered, it is advisable to initially block this invoice to check the amount, especially in the case of invoices that do not refer to a purchase order.
In Customizing for Logistics Invoice Verification, you can define:
Setting in Customizing for Logistics Invoice Verification
If the invoiced amount should be checked then;
Invoice Block>>> Item Amount Check>>> Activate Item Amount Check
The purchase orders in which the amount should be checked in invoice items, depending on the item category and goods receipt indicator of the order item. then;
Invoice Block >>> Item Amount Check >>> Set Item Amount Check
The amount as of which an item should be blocked the ;
Invoice Block >>>>Set Tolerance Limits.

Release strategy for GR?

Hi,
My company has requirement that GR should be subject to approval process before it can be posted. As far as I know there is no standard functionality in SAP for this (at least in ECC, as in SRM there is one).
Has anyone encounter this before? And how you deal with this? I have tried to persuade the user to drop this, but the problem is they already have this functionality in their legacy (which is custom made web based application), so it is pretty hard to argue with them in this area.
Any help will be appreciated.
Best regard

Hi Yosea,
Yes you said is right that there is no Release strategy. And can't imagine the situation in the legacy as well for this approval process thru Release strategy while doing the GR. But there is another way of accepting the goods either partial or full using movement types, you can do so.
My question is why do you (i.e., your client or company) want to control (through the approval process) at Goods receipt level. That makes complex and un logical as well, thats why there is an approval process comes into picture at PO (Purchase order is an external purchase document and is going out to an external party /vendor /supplier) against that they can supply the material /provide the services to the Organization/company and is required to control before issuing this perticular document called PO (i.e., work order and is required to be controlled thru Electronic release strategy in SAP) instead of manual before in legacy since there is money matter involved and needs to control over investment on Inventory /services purchases.
But where as GR, this is an incoming document, what the meaning in controlling it through approval process. That is the way you have to conveincene the client or company.
Ok fine. If still they want this functionality to be implemented (that is to controlling at the GR level for the goods coming in. Then there is another way to control it through receiving the stocks into different stock types using the respective movement types, but not through Release strategy such as Blocking (GR blocking), Quality stock (for checking the quanlity standards thru Quality Inspection) and then later you can move these stocks to Unrestricted use stock, so that this can be allowed to use further.
I dont think there is a functionality in the SRM as well. As I know that you can receive the Goods in SRM through Online Desktop confirmation that too partial or full quantity, that is nothing accepting/approval for the Partial or full quantity that is received against the PO which is created wrto to respective Shopping cart. And that is how you can control the goods that are coming inside / received at Stores/WH inorder to maintain the good quality of Inventory.
Note: Controll always suggested at the time of making agreement (i.e., Release strategy for the PO) but not at the time of receiving the goods. Here while receiving the goods only thing that a Stores person can see tmainly is needs to check for the Quantity, Quality of the goods that are ordered, Delivery time, Mode of transport, Shipping instructions, etc. This will help them further in evaluating the vendor.
Hence there is no logic is going for that option
Hope it clarifies,
Regards,
Sapsrin

Release strategy for PO and Contract

Hi,
I maintain characteritic for PO
Plant
Doc Type
Net Order Value
Purchasing Group
I maintain characteristic for contract
Company code
Target Value
Doc Type
Purchasing group
My class consist of
Plant
Doc Type
Net Order Value
Purchasing Group
Company code
Target value
Q1: Do i need to maintain ALL characteristic value when i define my release strategy for PO or Contract as some characteristic only apply to PO only or contract only?
Q2: What option do i have if i need to maintain all characteristic value ? leave it blank ? empty
Currently my PO release is working fine but when i try to maintain the contract release inside the class . my PO release is not triggering . I maintained diffrent release group for both PO and Contract .
Thank for your advice

First of all
For purchasing like PO,pr,contract you can able to get in ekko table.No need to maintain separate release unless if it your business requirement.Take Document type as one of the characteristics it will distinguish whether it is PO or contract.
You have to maintain all the characteristic value then only it will trigered release.
Check the release indicator as well.
Hope it will help.

Release strategy for quantity contract

Hi Gurus,
In quantity contract .. target value will not filled by the value(in header details) as it is quantityt contract.
We may have different line items with different cost..
my doubt is how the release strategy will be triggered for the quanityt contract and how the system will consider the whole value of the contract..
please explain/clarify
regards
subbu

Hi,
The release strategy for the contract will work in the exact mechanism as for the PO i.e. it will be determined based upon the total net value of the entire purchasing document.
Cheers,
HT

Release Strategy for SA/Contract/PO

Hi friends,
Should we have different release groups and release codes in contracting/ SA/ PO.
Because...
I have maintained 4 characteristics in release strategy for PO _[ Comp Co, plant, porg, total net order value].
But i want to maintan only 2 characteristics in release strategy for contract [plant, total net order value]
because the same is reflecting in contract config also.
Is it possible..please help me frnds.
Prabhu

Hi Prabhu,
Unfortunately you need to maintain characteristics of all possible values for company code and plant for contractsu2019 to subject the release.
Wish that SAP would be more flexible with release of PO, Contract and RFQ but it does not.
Regards

Release Strategy for Contract is not getting picked whereas it is ok for PO

Dear Experts,
I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
Kindly resolve the issue.
Satish

S0004830404 wrote:
Dear Experts,
>
> I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
> I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
>
> Kindly resolve the issue.
>
> Satish
hi,
use create other characteristic for value CEKKO-GNETW in this use the mk , wk values in value field and assign this characteristic to your class and save.
Thanking you

Release strategy for Schedule lines in SD

Hello All
Can we create a release strategy for Schedule Lines in Scheduling Agreement? If Yes How?
I have already maintained a release strategy for Item Level... which I want to put it for Schedule line as well....
Thanks in advance.

Hello,
I think you are in the wrong forum. Please choose the right forum category and post it there.
Matthias

Release strategy for goods reservation.

Similar Messages

Maybe you are looking for